[Keyboard] Add S7 Elephant Rev2 Support (#9398)

* Add S7 Elephant Rev2 Support

* Apply suggestions from code review

I tested the changes on my board as well, thanks for the suggestions!

* Added a default folder in the makefile so that this would no longer be a breaking change

23 files changed, 670 insertions, 37 deletions

diff --git a/keyboards/s7_elephant/readme.md b/keyboards/s7_elephant/readme.md
index 466e3f7316..76838be218 100644
--- a/keyboards/s7_elephant/readme.md
+++ b/keyboards/s7_elephant/readme.md
@@ -4,13 +4,16 @@
 
 A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
 
-Keyboard Maintainer: QMK Community  
-Hardware Supported: S7 Elephant  
-Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)  
+**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: S7 Elephant rev1, rev2
+* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make s7_elephant:default:dfu
+    make s7_elephant/rev1:default # 2018 run
+    make s7_elephant/rev2:default # 2019 run
 
 To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
 
diff --git a/keyboards/s7_elephant/config.h b/keyboards/s7_elephant/rev1/config.h
index c4f57178d8..d2770d117b 100644
--- a/keyboards/s7_elephant/config.h
+++ b/keyboards/s7_elephant/rev1/config.h
@@ -3,7 +3,7 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0xA13B // Hexidecimal A13B will be Jacky's vendor ID
 #define PRODUCT_ID      0x0007
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    jacky
@@ -22,9 +22,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
@@ -40,3 +37,12 @@
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_SLEEP
 #endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/s7_elephant/info.json b/keyboards/s7_elephant/rev1/info.json
index 3d45f0b094..3d45f0b094 100644
--- a/keyboards/s7_elephant/info.json
+++ b/keyboards/s7_elephant/rev1/info.json
diff --git a/keyboards/s7_elephant/keymaps/default/config.h b/keyboards/s7_elephant/rev1/keymaps/default/config.h
index 85f62371e9..85f62371e9 100644
--- a/keyboards/s7_elephant/keymaps/default/config.h
+++ b/keyboards/s7_elephant/rev1/keymaps/default/config.h
diff --git a/keyboards/s7_elephant/keymaps/default/keymap.c b/keyboards/s7_elephant/rev1/keymaps/default/keymap.c
index 339f2d379c..339f2d379c 100644
--- a/keyboards/s7_elephant/keymaps/default/keymap.c
+++ b/keyboards/s7_elephant/rev1/keymaps/default/keymap.c
diff --git a/keyboards/s7_elephant/keymaps/default/readme.md b/keyboards/s7_elephant/rev1/keymaps/default/readme.md
index c4fe30acdd..c4fe30acdd 100644
--- a/keyboards/s7_elephant/keymaps/default/readme.md
+++ b/keyboards/s7_elephant/rev1/keymaps/default/readme.md
diff --git a/keyboards/s7_elephant/rev1/readme.md b/keyboards/s7_elephant/rev1/readme.md
new file mode 100644
index 0000000000..702be4c3a7
--- /dev/null
+++ b/keyboards/s7_elephant/rev1/readme.md
@@ -0,0 +1,17 @@
+# S7 Elephant
+
+![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg)
+
+A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: S7 Elephant
+* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make s7_elephant/rev1:default
+
+To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/s7_elephant/rev1/rev1.c b/keyboards/s7_elephant/rev1/rev1.c
new file mode 100644
index 0000000000..520a869e57
--- /dev/null
+++ b/keyboards/s7_elephant/rev1/rev1.c
@@ -0,0 +1 @@
+#include "rev1.h"
diff --git a/keyboards/s7_elephant/s7_elephant.h b/keyboards/s7_elephant/rev1/rev1.h
index c351ffdb91..958ba0fae0 100644
--- a/keyboards/s7_elephant/s7_elephant.h
+++ b/keyboards/s7_elephant/rev1/rev1.h
@@ -1,5 +1,4 @@
-#ifndef S7_ELEPHANT_H
-#define S7_ELEPHANT_H
+#pragma once
 
 #include "quantum.h"
 
@@ -852,4 +851,3 @@ K400, K401, K402, K403,                   K407,             K410,             K4
 { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \
 { K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 }  \
 }
-#endif
diff --git a/keyboards/s7_elephant/rev1/rules.mk b/keyboards/s7_elephant/rev1/rules.mk
new file mode 100644
index 0000000000..91fe85c3df
--- /dev/null
+++ b/keyboards/s7_elephant/rev1/rules.mk
@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no    # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes    # Mouse keys
+EXTRAKEY_ENABLE = yes    # Audio control and System control
+CONSOLE_ENABLE = no      # Console for debug
+COMMAND_ENABLE = no      # Commands for debug and configuration
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes        # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no    # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes    # Enable keyboard underlight functionality
diff --git a/keyboards/s7_elephant/rev2/config.h b/keyboards/s7_elephant/rev2/config.h
new file mode 100644
index 0000000000..5c5b526aa7
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/config.h
@@ -0,0 +1,83 @@
+/*
+Copyright 2020 MudkipMao
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA13B // Hexidecimal A13B will be Jacky's vendor ID
+#define PRODUCT_ID      0x0008 // 8 for S7++
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Jacky
+#define PRODUCT         Jacky S7 Elephant Rev 2
+#define DESCRIPTION     A high-end 70% custom keyboard
+
+/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ *
+ *                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 }
+
+/* Setting the matrix value of top left key for bootmagic lite */
+#define BOOTMAGIC_LITE_ROW      0
+#define BOOTMAGIC_LITE_COLUMN   15
+
+#define DIODE_DIRECTION ROW2COL
+
+#define BACKLIGHT_PIN B6
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 15
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 2
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#endif // RGB_DI_PIN
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/s7_elephant/rev2/info.json b/keyboards/s7_elephant/rev2/info.json
new file mode 100644
index 0000000000..5c811cd47d
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/info.json
@@ -0,0 +1,167 @@
+{
+    "keyboard_name": "S7 Elephant Rev2",
+    "url": "https://geekhack.org/index.php?topic=103148.0",
+    "maintainer": "qmk",
+    "width": 17.25,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "key_count": 75,
+            "layout": [
+                {"label":"K0F (B0,E6)", "x":0, "y":0},
+                {"label":"K00 (B0,D0)", "x":1.25, "y":0},
+                {"label":"K01 (B0,D1)", "x":2.25, "y":0},
+                {"label":"K02 (B0,D2)", "x":3.25, "y":0},
+                {"label":"K03 (B0,D3)", "x":4.25, "y":0},
+                {"label":"K04 (B0,D5)", "x":5.25, "y":0},
+                {"label":"K05 (B0,D4)", "x":6.25, "y":0},
+                {"label":"K06 (B0,D6)", "x":7.25, "y":0},
+                {"label":"K07 (B0,D7)", "x":8.25, "y":0},
+                {"label":"K08 (B0,B4)", "x":9.25, "y":0},
+                {"label":"K09 (B0,F7)", "x":10.25, "y":0},
+                {"label":"K0A (B0,F6)", "x":11.25, "y":0},
+                {"label":"K0B (B0,F5)", "x":12.25, "y":0},
+                {"label":"K0C (B0,F4)", "x":13.25, "y":0},
+                {"label":"K0D (B0,F1)", "x":14.25, "y":0},
+                {"label":"K0E (B0,F0)", "x":15.25, "y":0},
+                {"label":"K4E (B7,F0)", "x":16.25, "y":0},
+                {"label":"K1F (B1,E6)", "x":0, "y":1},
+                {"label":"K10 (B1,D0)", "x":1.25, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":2.75, "y":1},
+                {"label":"K12 (B1,D2)", "x":3.75, "y":1},
+                {"label":"K13 (B1,D3)", "x":4.75, "y":1},
+                {"label":"K14 (B1,D5)", "x":5.75, "y":1},
+                {"label":"K15 (B1,D4)", "x":6.75, "y":1},
+                {"label":"K16 (B1,D6)", "x":7.75, "y":1},
+                {"label":"K17 (B1,D7)", "x":8.75, "y":1},
+                {"label":"K18 (B1,B4)", "x":9.75, "y":1},
+                {"label":"K19 (B1,F7)", "x":10.75, "y":1},
+                {"label":"K1A (B1,F6)", "x":11.75, "y":1},
+                {"label":"K1B (B1,F5)", "x":12.75, "y":1},
+                {"label":"K1C (B1,F4)", "x":13.75, "y":1},
+                {"label":"K2C (B2,F4)", "x":14.75, "y":1, "w":1.5},
+                {"label":"K1E (B1,F0)", "x":16.25, "y":1},
+                {"label":"K2F (B2,E6)", "x":0, "y":2},
+                {"label":"K20 (B2,D0)", "x":1.25, "y":2, "w":1.75},
+                {"label":"K21 (B2,D1)", "x":3, "y":2},
+                {"label":"K22 (B2,D2)", "x":4, "y":2},
+                {"label":"K23 (B2,D3)", "x":5, "y":2},
+                {"label":"K24 (B2,D5)", "x":6, "y":2},
+                {"label":"K25 (B2,D4)", "x":7, "y":2},
+                {"label":"K26 (B2,D6)", "x":8, "y":2},
+                {"label":"K27 (B2,D7)", "x":9, "y":2},
+                {"label":"K28 (B2,B4)", "x":10, "y":2},
+                {"label":"K29 (B2,F7)", "x":11, "y":2},
+                {"label":"K2A (B2,F6)", "x":12, "y":2},
+                {"label":"K2B (B2,F5)", "x":13, "y":2},
+                {"label":"K1D (B1,F1)", "x":14, "y":2, "w":2.25},
+                {"label":"K2E (B2,F0)", "x":16.25, "y":2},
+                {"label":"K3F (B3,E6)", "x":0, "y":3},
+                {"label":"K30 (B3,D0)", "x":1.25, "y":3, "w":1.25},
+                {"label":"K31 (B3,D1)", "x":2.5, "y":3},
+                {"label":"K32 (B3,D2)", "x":3.5, "y":3},
+                {"label":"K33 (B3,D3)", "x":4.5, "y":3},
+                {"label":"K34 (B3,D5)", "x":5.5, "y":3},
+                {"label":"K35 (B3,D4)", "x":6.5, "y":3},
+                {"label":"K36 (B3,D6)", "x":7.5, "y":3},
+                {"label":"K37 (B3,D7)", "x":8.5, "y":3},
+                {"label":"K38 (B3,B4)", "x":9.5, "y":3},
+                {"label":"K39 (B3,F7)", "x":10.5, "y":3},
+                {"label":"K3A (B3,F6)", "x":11.5, "y":3},
+                {"label":"K3B (B3,F5)", "x":12.5, "y":3},
+                {"label":"K3C (B3,F4)", "x":13.5, "y":3, "w":1.75},
+                {"label":"K3D (B3,F1)", "x":15.25, "y":3},
+                {"label":"K3E (B3,F0)", "x":16.25, "y":3},
+                {"label":"K4F (B7,E6)", "x":0, "y":4},
+                {"label":"K40 (B7,D0)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K41 (B7,D1)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K42 (B7,D2)", "x":3.75, "y":4, "w":1.25},
+                {"label":"K46 (B7,D6)", "x":5, "y":4, "w":6.25},
+                {"label":"K48 (B7,B4)", "x":11.25, "y":4},
+                {"label":"K49 (B7,F7)", "x":12.25, "y":4},
+                {"label":"K4A (B7,F6)", "x":13.25, "y":4},
+                {"label":"K4B (B7,F5)", "x":14.25, "y":4},
+                {"label":"K4C (B7,F4)", "x":15.25, "y":4},
+                {"label":"K4D (B7,F1)", "x":16.25, "y":4}
+            ]
+        },
+        "LAYOUT_ansi_1u": {
+            "key_count": 73,
+            "layout": [
+                {"label":"K0F", "x":0, "y":0},
+                {"label":"K00", "x":1.25, "y":0},
+                {"label":"K01", "x":2.25, "y":0},
+                {"label":"K02", "x":3.25, "y":0},
+                {"label":"K03", "x":4.25, "y":0},
+                {"label":"K04", "x":5.25, "y":0},
+                {"label":"K05", "x":6.25, "y":0},
+                {"label":"K06", "x":7.25, "y":0},
+                {"label":"K07", "x":8.25, "y":0},
+                {"label":"K08", "x":9.25, "y":0},
+                {"label":"K09", "x":10.25, "y":0},
+                {"label":"K0A", "x":11.25, "y":0},
+                {"label":"K0B", "x":12.25, "y":0},
+                {"label":"K0C", "x":13.25, "y":0},
+                {"label":"K0E", "x":14.25, "y":0, "w":2},
+                {"label":"K4E", "x":16.25, "y":0},
+                {"label":"K1F", "x":0, "y":1},
+                {"label":"K10", "x":1.25, "y":1, "w":1.5},
+                {"label":"K11", "x":2.75, "y":1},
+                {"label":"K12", "x":3.75, "y":1},
+                {"label":"K13", "x":4.75, "y":1},
+                {"label":"K14", "x":5.75, "y":1},
+                {"label":"K15", "x":6.75, "y":1},
+                {"label":"K16", "x":7.75, "y":1},
+                {"label":"K17", "x":8.75, "y":1},
+                {"label":"K18", "x":9.75, "y":1},
+                {"label":"K19", "x":10.75, "y":1},
+                {"label":"K1A", "x":11.75, "y":1},
+                {"label":"K1B", "x":12.75, "y":1},
+                {"label":"K1C", "x":13.75, "y":1},
+                {"label":"K2C", "x":14.75, "y":1, "w":1.5},
+                {"label":"K1E", "x":16.25, "y":1},
+                {"label":"K2F", "x":0, "y":2},
+                {"label":"K20", "x":1.25, "y":2, "w":1.75},
+                {"label":"K21", "x":3, "y":2},
+                {"label":"K22", "x":4, "y":2},
+                {"label":"K23", "x":5, "y":2},
+                {"label":"K24", "x":6, "y":2},
+                {"label":"K25", "x":7, "y":2},
+                {"label":"K26", "x":8, "y":2},
+                {"label":"K27", "x":9, "y":2},
+                {"label":"K28", "x":10, "y":2},
+                {"label":"K29", "x":11, "y":2},
+                {"label":"K2A", "x":12, "y":2},
+                {"label":"K2B", "x":13, "y":2},
+                {"label":"K1D", "x":14, "y":2, "w":2.25},
+                {"label":"K2E", "x":16.25, "y":2},
+                {"label":"K3F", "x":0, "y":3},
+                {"label":"K30", "x":1.25, "y":3, "w":2.25},
+                {"label":"K32", "x":3.5, "y":3},
+                {"label":"K33", "x":4.5, "y":3},
+                {"label":"K34", "x":5.5, "y":3},
+                {"label":"K35", "x":6.5, "y":3},
+                {"label":"K36", "x":7.5, "y":3},
+                {"label":"K37", "x":8.5, "y":3},
+                {"label":"K38", "x":9.5, "y":3},
+                {"label":"K39", "x":10.5, "y":3},
+                {"label":"K3A", "x":11.5, "y":3},
+                {"label":"K3B", "x":12.5, "y":3},
+                {"label":"K3C", "x":13.5, "y":3, "w":1.75},
+                {"label":"K3D", "x":15.25, "y":3},
+                {"label":"K3E", "x":16.25, "y":3},
+                {"label":"K4F", "x":0, "y":4},
+                {"label":"K40", "x":1.25, "y":4, "w":1.25},
+                {"label":"K41", "x":2.5, "y":4, "w":1.25},
+                {"label":"K42", "x":3.75, "y":4, "w":1.25},
+                {"label":"K46", "x":5, "y":4, "w":6.25},
+                {"label":"K48", "x":11.25, "y":4},
+                {"label":"K49", "x":12.25, "y":4},
+                {"label":"K4A", "x":13.25, "y":4},
+                {"label":"K4B", "x":14.25, "y":4},
+                {"label":"K4C", "x":15.25, "y":4},
+                {"label":"K4D", "x":16.25, "y":4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/s7_elephant/rev2/keymaps/default/keymap.c b/keyboards/s7_elephant/rev2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..b1fbd3830d
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/keymaps/default/keymap.c
@@ -0,0 +1,65 @@
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+    _QWERTY,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------.   ,-------------------------------------------------------------------------------------------------.
+ * |  F1  |   | Esc`~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   | Ins |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |  F2  |   | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \     | Del |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |  F3  |   | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter      | Home|
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |  F4  |   | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |    RShift   |  U  | End |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |  F5  |   | Ctrl |  Gui  |  Alt  |              Space                | RAlt |  FN  | RCtrl |  L  | D  |  R  |
+ * `------'   `-------------------------------------------------------------------------------------------------'
+ */
+
+    [_QWERTY] = LAYOUT_ansi_1u(
+        KC_F1, KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_F2, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_F3, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,      KC_HOME,
+        KC_F4, KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_F5, KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,             KC_RALT, MO(_FN), KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+/* FN
+ * ,------.   ,-------------------------------------------------------------------------------------------------.
+ * |Reset |   |  F1   | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | PScr |  ScrLck  |Pause|
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |         |Prev |Play |Next |     |     |     |     |VolD |Mute |VolU |     |               |PgUp |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |           |     |     |     |     |     |     |     |     |     |     |             |     |PgDn |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |EEPRST|   |      |       |       |                                   |      |      |       |     |    |     |
+ * `------'   `-------------------------------------------------------------------------------------------------'
+ */
+
+    [_FN] = LAYOUT_ansi_1u(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______,          KC_PGUP,
+        _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN,
+        EEP_RST, _______, _______, _______,                        _______,              _______, _______, _______,          _______, _______, _______
+    ),
+};
+
+bool led_update_user(led_t led_state) {
+    // Turn LEDs On/Off for Caps Lock
+    if (led_state.caps_lock) {
+        rgblight_enable_noeeprom();
+        rgblight_sethsv_noeeprom(0, 0, 80);
+    } else {
+        rgblight_sethsv_noeeprom(0, 0, 80);
+        rgblight_disable_noeeprom();
+    }
+    return false;
+}
diff --git a/keyboards/s7_elephant/rev2/keymaps/default/readme.md b/keyboards/s7_elephant/rev2/keymaps/default/readme.md
new file mode 100644
index 0000000000..c4fe30acdd
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/keymaps/default/readme.md
@@ -0,0 +1,35 @@
+# Default keymap for S7 Elephant
+
+**Features**
+
+* LEDs are functioning as Caps-Lock indicators
+
+## QWERTY (Normal) Layer
+```
+,------.   ,-------------------------------------------------------------------------------------------------.
+|  F1  |   | Esc`~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |Home |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F2  |   | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \     | End |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F3  |   | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter      | Ins |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F4  |   | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |    RShift   |  U  | Del |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F5  |   | Ctrl |  Gui  |  Alt  |              Space                | FN | RAlt  | RCtrl |  L  |  D  |  R  |
+`------'   `-------------------------------------------------------------------------------------------------'
+```
+
+## FN Layer
+```
+,------.   ,-------------------------------------------------------------------------------------------------.
+|Reset |   |  F1   | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | PScr |  ScrLck  |Pause|
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |         |Prev |Play |Next |     |     |     |     |VolD |Mute |VolU |     |               |PgUp |
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |           |     |     |     |     |     |     |     |     |     |     |             |     |PgDn |
+|------|   |-------------------------------------------------------------------------------------------------|
+|EPRM  |   |      |       |       |                                   |    |       |       |     |     |     |
+`------'   `-------------------------------------------------------------------------------------------------'
+```
diff --git a/keyboards/s7_elephant/rev2/keymaps/via/keymap.c b/keyboards/s7_elephant/rev2/keymaps/via/keymap.c
new file mode 100644
index 0000000000..b81777b12a
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/keymaps/via/keymap.c
@@ -0,0 +1,92 @@
+#include QMK_KEYBOARD_H
+
+// For readability
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default layer
+    * ,------.   ,-------------------------------------------------------------------------------------------------.
+    * |  F1  |   | Esc   |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   | Ins |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F2  |   | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \     | Del |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F3  |   | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter      |Home |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F4  |   | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |    RShift   |  U  | End |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F5  |   | Ctrl |  Gui  |  Alt  |              Space                | RAlt |  FN  | RCtrl |  L  | D  |  R  |
+    * `------'   `-------------------------------------------------------------------------------------------------'
+    */
+    [_BASE] = LAYOUT_ansi_1u(
+        KC_F1, KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_F2, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_F3, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,      KC_HOME,
+        KC_F4, KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_F5, KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                 KC_RALT, MO(1),   KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+    /* Fn1 Layer 
+    * ,------.   ,-------------------------------------------------------------------------------------------------.
+    * |  F6  |   |  `~   |     |     |     |     |     |     |     |     |     |     |     |      |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F7  |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F8  |   |         |VolD |VolU |Mute |     |     |     |     |     |     |     |     |               |PgUp |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F9  |   |           |Prev |Play |Next |     |     |     |     |     |     |     |             |     |PgDn |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |  F10 |   |      |       |       |                                   |      |      |       |     |    |     |
+    * `------'   `-------------------------------------------------------------------------------------------------'
+    */
+    [_FN1] = LAYOUT_ansi_1u(
+        KC_F6,   KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_F7,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_F8,   KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,       KC_PGUP,
+        KC_F9,   KC_TRNS,          KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN,
+        KC_F10,  KC_TRNS, KC_TRNS, KC_TRNS,                        KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+    /* Fn2 Layer 
+    * ,------.   ,-------------------------------------------------------------------------------------------------.
+    * |      |   |       |     |     |     |     |     |     |     |     |     |     |     |      |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |         |     |     |     |     |     |     |     |     |     |     |     |               |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |           |     |     |     |     |     |     |     |     |     |     |             |     |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |      |       |       |                                   |      |      |       |     |    |     |
+    * `------'   `-------------------------------------------------------------------------------------------------'
+    */
+    [_FN2] = LAYOUT_ansi_1u(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,       KC_TRNS,
+        KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                        KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+    /* Fn3 Layer 
+    * ,------.   ,-------------------------------------------------------------------------------------------------.
+    * |      |   |       |     |     |     |     |     |     |     |     |     |     |     |      |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |         |     |     |     |     |     |     |     |     |     |     |     |               |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |           |     |     |     |     |     |     |     |     |     |     |             |     |     |
+    * |------|   |-------------------------------------------------------------------------------------------------|
+    * |      |   |      |       |       |                                   |      |      |       |     |    |     |
+    * `------'   `-------------------------------------------------------------------------------------------------'
+    */
+    [_FN3] = LAYOUT_ansi_1u(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,       KC_TRNS,
+        KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                        KC_TRNS,              KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};
diff --git a/keyboards/s7_elephant/rev2/keymaps/via/readme.md b/keyboards/s7_elephant/rev2/keymaps/via/readme.md
new file mode 100644
index 0000000000..c4fe30acdd
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/keymaps/via/readme.md
@@ -0,0 +1,35 @@
+# Default keymap for S7 Elephant
+
+**Features**
+
+* LEDs are functioning as Caps-Lock indicators
+
+## QWERTY (Normal) Layer
+```
+,------.   ,-------------------------------------------------------------------------------------------------.
+|  F1  |   | Esc`~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |Home |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F2  |   | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \     | End |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F3  |   | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter      | Ins |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F4  |   | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |    RShift   |  U  | Del |
+|------|   |-------------------------------------------------------------------------------------------------|
+|  F5  |   | Ctrl |  Gui  |  Alt  |              Space                | FN | RAlt  | RCtrl |  L  |  D  |  R  |
+`------'   `-------------------------------------------------------------------------------------------------'
+```
+
+## FN Layer
+```
+,------.   ,-------------------------------------------------------------------------------------------------.
+|Reset |   |  F1   | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | PScr |  ScrLck  |Pause|
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |         |Prev |Play |Next |     |     |     |     |VolD |Mute |VolU |     |               |PgUp |
+|------|   |-------------------------------------------------------------------------------------------------|
+|      |   |           |     |     |     |     |     |     |     |     |     |     |             |     |PgDn |
+|------|   |-------------------------------------------------------------------------------------------------|
+|EPRM  |   |      |       |       |                                   |    |       |       |     |     |     |
+`------'   `-------------------------------------------------------------------------------------------------'
+```
diff --git a/keyboards/s7_elephant/rev2/keymaps/via/rules.mk b/keyboards/s7_elephant/rev2/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/s7_elephant/rev2/readme.md b/keyboards/s7_elephant/rev2/readme.md
new file mode 100644
index 0000000000..04cbafd96f
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/readme.md
@@ -0,0 +1,17 @@
+# S7 Elephant
+
+![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg)
+
+A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: S7 Elephant
+* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make s7_elephant/rev2:default
+
+To enter the bootloader, either short the pins on the PCB next to CAPSLOCK or the press the RESET button on the FN layer.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/s7_elephant/rev2/rev2.c b/keyboards/s7_elephant/rev2/rev2.c
new file mode 100644
index 0000000000..3e84aedd52
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/rev2.c
@@ -0,0 +1,19 @@
+/* Copyright 2020 MudkipMao 
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev2.h"
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/s7_elephant/rev2/rev2.h b/keyboards/s7_elephant/rev2/rev2.h
new file mode 100644
index 0000000000..16fe50aadb
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/rev2.h
@@ -0,0 +1,61 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* ALL: This is an odd layout that the JSON file comes preloaded with. Split left-shift and ansi enter
+ * ,------.   ,-------------------------------------------------------------------------------------------------.
+ * |      |   |       |     |     |     |     |     |     |     |     |     |     |     |     |           |     |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+   |      |   |        |     |     |     |     |     |     |     |     |     |     |     |     |          |     |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |         |     |     |     |     |     |     |     |     |     |     |     |               |     |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |      |    |     |     |     |     |     |     |     |     |     |     |             |     |     |
+ * |------|   |-------------------------------------------------------------------------------------------------|
+ * |      |   |      |       |       |                                   |      |      |     |      |     |     |
+ * `------'   `-------------------------------------------------------------------------------------------------'
+ */
+
+#define LAYOUT_all( \
+    K0F,  K00,  K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E,  \
+    K1F,  K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,      K1E,  \
+    K2F,  K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D,           K2E,  \
+    K3F,  K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E,  \
+    K4F,  K40,  K41, K42,                K46,                K48, K49, K4A, K4B, K4C, K4D   \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   ___,   K2E,   K2F   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F   }, \
+    { K40,   K41,   K42,   ___,   ___,   ___,   K46,   ___,   K48,   K49,   K4A,   K4B,   K4C,   K4D,   K4E,   K4F   }  \
+}
+
+/* ANSI
+ * ,---.   ,---------------------------------------------------------------.
+ * |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |       |   |
+ * |---|   |---------------------------------------------------------------|
+ * |   |   |     |   |   |   |   |   |   |   |   |   |   |   |   |     |   |
+ * |---|   |---------------------------------------------------------------|
+ * |   |   |      |   |   |   |   |   |   |   |   |   |   |   |        |   |
+ * |---|   |---------------------------------------------------------------|
+ * |   |   |        |   |   |   |   |   |   |   |   |   |   |      |   |   |
+ * |---|   |---------------------------------------------------------------|
+ * |   |   |    |    |    |                        |   |   |   |   |   |   |
+ * `---'   `---------------------------------------------------------------'
+ */
+
+#define LAYOUT_ansi_1u( \
+    K0F,  K00,  K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,    K0E,   K4E,  \
+    K1F,  K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,      K1E,  \
+    K2F,  K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D,           K2E,  \
+    K3F,    K30,     K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E,  \
+    K4F,  K40,  K41, K42,                K46,                K48, K49, K4A, K4B, K4C, K4D   \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   ___,   K0E,   K0F   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   ___,   K2E,   K2F   }, \
+    { K30,   ___,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F   }, \
+    { K40,   K41,   K42,   ___,   ___,   ___,   K46,   ___,   K48,   K49,   K4A,   K4B,   K4C,   K4D,   K4E,   K4F   }  \
+}
diff --git a/keyboards/s7_elephant/rev2/rules.mk b/keyboards/s7_elephant/rev2/rules.mk
new file mode 100644
index 0000000000..cbf45a2b9b
--- /dev/null
+++ b/keyboards/s7_elephant/rev2/rules.mk
@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+CONSOLE_ENABLE = no          # Console for debug
+COMMAND_ENABLE = no          # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no             # MIDI support
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no            # Audio output on port C6
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+LTO_ENABLE = yes
diff --git a/keyboards/s7_elephant/rules.mk b/keyboards/s7_elephant/rules.mk
index 91fe85c3df..318b6ee209 100644
--- a/keyboards/s7_elephant/rules.mk
+++ b/keyboards/s7_elephant/rules.mk
@@ -1,25 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no    # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes    # Mouse keys
-EXTRAKEY_ENABLE = yes    # Audio control and System control
-CONSOLE_ENABLE = no      # Console for debug
-COMMAND_ENABLE = no      # Commands for debug and configuration
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes        # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no    # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes    # Enable keyboard underlight functionality
+DEFAULT_FOLDER = s7_elephant/rev1
\ No newline at end of file
diff --git a/keyboards/s7_elephant/s7_elephant.c b/keyboards/s7_elephant/s7_elephant.c
deleted file mode 100644
index a869f46dbe..0000000000
--- a/keyboards/s7_elephant/s7_elephant.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "s7_elephant.h"