Minor updates to docs (#2406)

* [docs/] Cleaning up some language to make it more clear.

* [docs/] Adding instructions for installing deps on RH / Fedora.

3 files changed, 27 insertions, 25 deletions

diff --git a/docs/faq_build.md b/docs/faq_build.md
index d38ca69d0d..ff409f9c61 100644
--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -1,40 +1,25 @@
 # Frequently Asked Build Questions
 
-This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
+This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
 
 ## Can't Program on Linux
-You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
+You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
 
-In short when your controller is ATMega32u4,
+An example of using `sudo`, when your controller is ATMega32u4:
 
     $ sudo dfu-programmer atmega32u4 erase --force
     $ sudo dfu-programmer atmega32u4 flash your.hex
     $ sudo dfu-programmer atmega32u4 reset
 
-or just
+or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-But to run `make` with root privilege is not good idea. Use former method if possible.
-
-## WINAVR is Obsolete
-It is no longer recommended and may cause some problem.
-See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
-## USB VID and PID
-You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
-
-Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
-
-Also see this.
-https://github.com/tmk/tmk_keyboard/issues/150
-
-You can buy a really unique VID:PID here. I don't think you need this for personal use.
-- http://www.obdev.at/products/vusb/license.html
-- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
 
 ## Linux `udev` Rules
-On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
+On Linux, you'll need proper privileges to access the MCU. You can either use
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+## WINAVR is Obsolete
+It is no longer recommended and may cause some problem.
+See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
+
+## USB VID and PID
+You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
+
+Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
+
+Also see this.
+https://github.com/tmk/tmk_keyboard/issues/150
+
+You can buy a really unique VID:PID here. I don't think you need this for personal use.
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
 ## Cortex: `cstddef: No such file or directory`
 GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
@@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
 https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
 https://developer.mbed.org/forum/mbed/topic/5205/
 
-
 ## `clock_prescale_set` and `clock_div_1` Not Available
 Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
 
diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md
index cd748dbf89..13c8def52d 100644
--- a/docs/getting_started_build_tools.md
+++ b/docs/getting_started_build_tools.md
@@ -31,11 +31,14 @@ git
 
 Install the dependencies with your favorite package manager.
 
-Debian/Ubuntu example:
+Debian / Ubuntu example:
 
     sudo apt-get update
     sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
 
+Fedora / Red Hat example:
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+
 ## Nix
 
 If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.
diff --git a/docs/keymap.md b/docs/keymap.md
index 8401ee1484..090a92661d 100644
--- a/docs/keymap.md
+++ b/docs/keymap.md
@@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
 * **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
 * **`layer_state`** has current on/off status of each layer in its bits.
 
-Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
+Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
 
     Initial state of Keymap          Change base layout
     -----------------------          ------------------