ok

20 files changed, 309 insertions, 366 deletions

diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
index c4e0cb45d7..12351b990b 100644
--- a/keyboard/atomic/Makefile
+++ b/keyboard/atomic/Makefile
@@ -39,7 +39,7 @@
 #----------------------------------------------------------------------------
 
 # Target file name (without extension).
-TARGET = atomic_lufa
+TARGET = planck_lufa
 
 # Directory common source filess exist
 TOP_DIR = ../..
@@ -47,19 +47,49 @@ TOP_DIR = ../..
 # Directory keyboard dependent files exist
 TARGET_DIR = .
 
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
+
+
+# # project specific files
+ifdef COMMON
+
+	SRC = keymap_common.c \
+	led.c \
+	backlight.c
 
 ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
+    SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
 else
-    SRC := keymap_vlad.c $(SRC)
+    SRC := common_keymaps/keymap_jack.c $(SRC)
 endif
 
-CONFIG_H = config.h
+ifdef MATRIX
+    SRC := matrix_$(MATRIX).c $(SRC)
+else
+    SRC := matrix_pcb.c $(SRC)
+endif
+
+else
+
+SRC = extended_keymap_common.c \
+	analog.c \
+	led.c \
+	backlight.c
+
+ifdef KEYMAP
+    SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := extended_keymaps/extended_keymap_default.c $(SRC)
+endif
+
+ifdef MATRIX
+    SRC := matrix_$(MATRIX).c $(SRC)
+else
+    SRC := matrix_pcb.c $(SRC)
+endif
 
+endif
+
+CONFIG_H = config.h
 
 # MCU name
 #MCU = at90usb1287
@@ -119,9 +149,10 @@ MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
diff --git a/keyboard/atomic/Makefile.pjrc b/keyboard/atomic/Makefile.pjrc
index 9655ff65a9..be83ba18b1 100644
--- a/keyboard/atomic/Makefile.pjrc
+++ b/keyboard/atomic/Makefile.pjrc
@@ -55,7 +55,7 @@ SRC =	keymap_common.c \
 ifdef KEYMAP
     SRC := keymap_$(KEYMAP).c $(SRC)
 else
-    SRC := keymap_poker.c $(SRC)
+    SRC := keymap_jack.c $(SRC)
 endif
 
 CONFIG_H = config.h
diff --git a/keyboard/atomic/README 2.md b/keyboard/atomic/README 2.md
deleted file mode 100644
index 510cb5c8b6..0000000000
--- a/keyboard/atomic/README 2.md
+++ /dev/null
@@ -1,141 +0,0 @@
-GH60 keyboard firmware
-======================
-DIY compact keyboard designed and run by komar007 and Geekhack community.
-
-- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
-
-## GH60 Resources
-- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
-- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
-- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
-- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
-- [Group buy](http://geekhack.org/index.php?topic=41464.0)
-
-
-## Build
-Move to this directory then just run `make` like:
-
-    $ make
-
-Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
-
-
-## Keymap
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
-
-To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
-
-    $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
-
-
-### 1  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
-
-    Fn + Esc = `
-    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
-
-#### 1.0 Default layer
-    ,-----------------------------------------------------------.
-    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space             |Fn  |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-#### 1.1 Poker Fn layer
-    ,-----------------------------------------------------------.
-    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|       |
-    |-----------------------------------------------------------|
-    |     |FnQ| Up|   |   |   |   |   |   |Cal|   |Hom|Ins|     |
-    |-----------------------------------------------------------|
-    |      |Lef|Dow|Rig|   |   |Psc|Slk|Pau|   |Tsk|End|        |
-    |-----------------------------------------------------------|
-    |        |Del|   |Web|Mut|VoU|VoD|   |PgU|PgD|Del|   Up     |
-    |-----------------------------------------------------------|
-    |    |    |    |         FnS            |Fn  |Left|Down|Righ|
-    `-----------------------------------------------------------'
-
-
-### 2. Plain
-Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
-See [keymap_plain.c](keymap_plain.c) for detail.
-
-#### 1.0 Plain Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-
-
-### 3. Hasu
-This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
-
-
-### 4. SpaceFN
-This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
-
-#### 4.0 Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space/Fn          |Alt |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-#### 4.1 SpaceFN layer
-    ,-----------------------------------------------------------.
-    |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-    |-----------------------------------------------------------|
-    |     |   |   |   |   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
-    |-----------------------------------------------------------|
-    |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
-    |-----------------------------------------------------------|
-    |        |   |   |   |   |Spc|PgD|`  |~  |   |   |          |
-    |-----------------------------------------------------------|
-    |    |    |    |            Fn          |    |    |    |    |
-    `-----------------------------------------------------------'
-
-
-### 5. HHKB
-[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
-#### 5.0: Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Bspc |
-    |-----------------------------------------------------------|
-    |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn |
-    |-----------------------------------------------------------|
-    |    |Gui |Alt |      Space             |    |Alt |Gui |    |
-    `-----------------------------------------------------------'
-#### 5.1: HHKB Fn layer
-    ,-----------------------------------------------------------.
-    |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-    |-----------------------------------------------------------|
-    |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
-    |-----------------------------------------------------------|
-    |      |VoD|VoU|Mut|Ejc|   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
-    |-----------------------------------------------------------|
-    |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
-    |-----------------------------------------------------------|
-    |    |    |    |                        |    |    |    |    |
-    `-----------------------------------------------------------'
-
diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h
index 5ea953805f..fd286bb992 100644
--- a/keyboard/atomic/config.h
+++ b/keyboard/atomic/config.h
@@ -24,8 +24,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         Atomic Keyboard
-#define DESCRIPTION     t.m.k. keyboard firmware for Atomic
+#define PRODUCT         Atomic
+#define DESCRIPTION     A compact ortholinear keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -34,6 +34,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
+/* number of backlight levels */
+/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
+#define BACKLIGHT_LEVELS 15
+
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
diff --git a/keyboard/atomic/keymap_common.h b/keyboard/atomic/keymap_common.h
index c582c0135f..4a0bcfbb08 100644
--- a/keyboard/atomic/keymap_common.h
+++ b/keyboard/atomic/keymap_common.h
@@ -33,55 +33,97 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
 extern const uint16_t fn_actions[];
 
-// JCK: Semi-Standard layout
-#define KEYMAP_JCK( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2D,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3C,   K3D, K3E, \
-     K40,  K41,  K43,           K46,                  K4A, K4B, K4C, K4D, K4E  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_##K3C, KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
-}
 
-// ASK: Short Space layout
-#define KEYMAP_ASK_MESSY( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2D,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3C,   K3D, K3E, \
-     K40,  K41,  K43,  K44,        K46,     K48, K49, K4A, K4B, K4C, K4D, K4E  \
+// MIT Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |           |     |     |     |     |     |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3A, K3B  \
 ) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_##K3C, KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_##K44, KC_NO,    KC_##K46, KC_NO,    KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
 }
 
-#define KEYMAP_ASK( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2C,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3B,   K3D, K3E, \
-     K40,  K41,  K43,  K44,        K46,     K47, K48, K4A, K4B, K4C, K4D, K4E  \
+// Grid Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP_GRID( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
 ) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO,    KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO,    KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_##K44, KC_NO,    KC_##K46, KC_##K47, KC_##K48, KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
 }
 
+#define KEYMAP_REVERSE(                                                 \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B,           \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B,           \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           \
+  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3A, K3B            \
+  ) {                                                                   \
+    { KC_##K0B, KC_##K0A, KC_##K09, KC_##K08, KC_##K07, KC_##K06, KC_##K05, KC_##K04, KC_##K03, KC_##K02, KC_##K01, KC_##K00 }, \
+    { KC_##K1B, KC_##K1A, KC_##K19, KC_##K18, KC_##K17, KC_##K16, KC_##K15, KC_##K14, KC_##K13, KC_##K12, KC_##K11, KC_##K10 }, \
+    { KC_##K2B, KC_##K2A, KC_##K29, KC_##K28, KC_##K27, KC_##K26, KC_##K25, KC_##K24, KC_##K23, KC_##K22, KC_##K21, KC_##K20 }, \
+    { KC_##K3B, KC_##K3A, KC_##K39, KC_##K38, KC_##K37, KC_##K35, KC_##K35, KC_##K34, KC_##K33, KC_##K32, KC_##K31, KC_##K30 },   \
+            }
+
+#define KEYMAP_AND_REVERSE(args...) KEYMAP(args), KEYMAP_REVERSE(args)
 
-// MLO: Semi-Grid layout
+#define KEYMAP_SWAP(                                                    \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B,           \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B,           \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           \
+  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3A, K3B            \
+  ) {                                                                   \
+    { KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05 }, \
+    { KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15 }, \
+    { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25 }, \
+    { KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K35, KC_##K35, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34 },    \
+}
+
+#define KEYMAP_AND_SWAP(args...) KEYMAP(args), KEYMAP_SWAP(args)
 
-// KLN: Grid layout
+/*
+   Keymap for the Planck 48 key variant.
+ */
+#define KEYMAP_48( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }, \
+}
 
-// PKR: Standard layout
 
 #endif
diff --git a/keyboard/atomic/keymap_plain.c b/keyboard/atomic/keymap_plain.c
deleted file mode 100644
index e7f53649f0..0000000000
--- a/keyboard/atomic/keymap_plain.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, DEL, \
-                     ESC,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     MPLY, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         FN1,  LEFT, DOWN, UP,   RGHT),
-    [1] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, LBRC, RBRC, BSLS, DEL, \
-                     ESC,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,    QUOT,    ENT,     MPLY, \
-                     LSFT, Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         FN1,  LEFT, DOWN, UP,   RGHT),
-    [2] = KEYMAP_JCK(GRV,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,    BSPC, \
-                     TAB,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    LBRC, RBRC, BSLS, DEL, \
-                     ESC,  FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC,   BSLS,    ENT,     MPLY, \
-                     LSFT, FN9,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         TRNS,  MNXT, VOLD, VOLU, MPLY),
-};
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
-    [3] = ACTION_DEFAULT_LAYER_SET(0), 
-    [4] = ACTION_DEFAULT_LAYER_SET(1),  
-
-    [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
- 
-    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
-    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
-    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
-    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
-    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
-    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
-    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
-    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
-    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
-    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
-    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
-    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
-    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
-    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
-    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
-    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
-};
diff --git a/keyboard/atomic/keymap_ricky.c b/keyboard/atomic/keymap_ricky.c
deleted file mode 100644
index fcc91a1fa5..0000000000
--- a/keyboard/atomic/keymap_ricky.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, PSCR, \
-                     CAPS, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     INS, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    UP, DEL, \
-                     LCTL,    LGUI,  LALT,          SPC,                         RALT,  RCTL, LEFT, DOWN,   RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-};
-
diff --git a/keyboard/atomic/keymap_vlad.c b/keyboard/atomic/keymap_vlad.c
deleted file mode 100644
index e56bcf1618..0000000000
--- a/keyboard/atomic/keymap_vlad.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_ASK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, DEL, \
-                     CAPS,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     VOLU, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    UP, VOLD, \
-                     LCTL,    LGUI,  LALT,   LGUI,     SPC,           RGUI,       RALT, RGUI, RCTL, LEFT, DOWN,   RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-};
\ No newline at end of file
diff --git a/keyboard/atomic/led.c b/keyboard/atomic/led.c
index 2d52fbf1c3..2c05746607 100644
--- a/keyboard/atomic/led.c
+++ b/keyboard/atomic/led.c
@@ -22,4 +22,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 void led_set(uint8_t usb_led)
 {
+    // // Using PE6 Caps Lock LED
+    // if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    // {
+    //     // Output high.
+    //     DDRE |= (1<<6);
+    //     PORTE |= (1<<6);
+    // }
+    // else
+    // {
+    //     // Output low.
+    //     DDRE &= ~(1<<6);
+    //     PORTE &= ~(1<<6);
+    // }
 }
diff --git a/keyboard/atomic/matrix.c b/keyboard/atomic/matrix.c
index 98102cb694..2f2dbdb108 100644
--- a/keyboard/atomic/matrix.c
+++ b/keyboard/atomic/matrix.c
@@ -1,5 +1,6 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2012 Jun Wako 
+Generated by planckkeyboard.com (2014 Jack Humbert)
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -22,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdbool.h>
 #include <avr/io.h>
 #include <util/delay.h>
-#include "action_layer.h"
 #include "print.h"
 #include "debug.h"
 #include "util.h"
@@ -43,7 +43,6 @@ static void init_cols(void);
 static void unselect_rows(void);
 static void select_row(uint8_t row);
 
-
 inline
 uint8_t matrix_rows(void)
 {
@@ -56,7 +55,6 @@ uint8_t matrix_cols(void)
     return MATRIX_COLS;
 }
 
-
 void matrix_init(void)
 {
     // initialize row and col
@@ -96,7 +94,6 @@ uint8_t matrix_scan(void)
         }
     }
 
-
     return 1;
 }
 
@@ -109,7 +106,7 @@ bool matrix_is_modified(void)
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<<col));
+    return (matrix[row] & ((matrix_row_t)1<col));
 }
 
 inline
@@ -137,51 +134,39 @@ uint8_t matrix_key_count(void)
     return count;
 }
 
-/* Column pin configuration
- * col: 0  1  2  3  4  5  6  7  8  9  10 11
- * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
- */
-
 static void init_cols(void)
 {
-    DDRC  &= ~(1<<6 | 1<<7);
-    PORTC |=  (1<<6 | 1<<7);
-    DDRD  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
-    PORTD |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
-    DDRB  &= ~(1<<4 | 1<<5 | 1<<6);
-    PORTB |=  (1<<4 | 1<<5 | 1<<6);
-    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
-    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    DDRB &= ~(1<<6 | 1<<5 | 1<<4);
+    PORTB |= (1<<6 | 1<<5 | 1<<4);
+    DDRD &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |= (1<<7 | 1<<6 | 1<<4);
+    DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    
 }
 
 static matrix_row_t read_cols(void)
 {
-    return (PINC&(1<<6) ? 0 : (1<< 0)) |
-           (PINC&(1<<7) ? 0 : (1<< 1)) |
-           (PIND&(1<<5) ? 0 : (1<< 2)) |
-           (PIND&(1<<4) ? 0 : (1<< 3)) |
-           (PIND&(1<<6) ? 0 : (1<< 4)) |
-           (PIND&(1<<7) ? 0 : (1<< 5)) |
-           (PINB&(1<<4) ? 0 : (1<< 6)) |
-           (PINB&(1<<5) ? 0 : (1<< 7)) |
-           (PINB&(1<<6) ? 0 : (1<< 8)) |
-           (PINF&(1<<7) ? 0 : (1<< 9)) |
-           (PINF&(1<<6) ? 0 : (1<<10)) |
-           (PINF&(1<<5) ? 0 : (1<<11)) |
-           (PINF&(1<<4) ? 0 : (1<<12)) |
-           (PINF&(1<<1) ? 0 : (1<<13)) |
-           (PINF&(1<<0) ? 0 : (1<<14));
+  return (PIND&(1<<4) ? 0 : (1<<0)) |
+         (PIND&(1<<6) ? 0 : (1<<1)) |
+         (PIND&(1<<7) ? 0 : (1<<2)) |
+         (PINB&(1<<4) ? 0 : (1<<3)) |
+         (PINB&(1<<5) ? 0 : (1<<4)) |
+         (PINB&(1<<6) ? 0 : (1<<5)) |
+         (PINF&(1<<7) ? 0 : (1<<6)) |
+         (PINF&(1<<6) ? 0 : (1<<7)) |
+         (PINF&(1<<5) ? 0 : (1<<8)) |
+         (PINF&(1<<4) ? 0 : (1<<9)) |
+         (PINF&(1<<1) ? 0 : (1<<10)) |
+         (PINF&(1<<0) ? 0 : (1<<11));
+         
 }
 
-/* Row pin configuration
- * row: 0  1  2  3
- * pin: B0 B1 B2 B3
- */
 static void unselect_rows(void)
 {
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRB  &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
-    PORTB |=  (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+    DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
+    PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3);
+    
 }
 
 static void select_row(uint8_t row)
@@ -203,9 +188,6 @@ static void select_row(uint8_t row)
             DDRB  |= (1<<3);
             PORTB &= ~(1<<3);
             break;
-        case 4:
-            DDRB  |= (1<<7);
-            PORTB &= ~(1<<7);
-            break;
+        
     }
 }
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index 964e6832ea..0da2a86c95 100644
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -53,9 +53,9 @@ TARGET_DIR = .
 ifdef COMMON
 
 	SRC = keymap_common.c \
-	matrix_pcb.c \
 	led.c \
-	backlight.c
+	backlight.c \
+	beeps.c 
 
 ifdef KEYMAP
     SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
@@ -63,12 +63,19 @@ else
     SRC := common_keymaps/keymap_jack.c $(SRC)
 endif
 
+ifdef MATRIX
+    SRC := matrix_$(MATRIX).c $(SRC)
+else
+    SRC := matrix_pcb.c $(SRC)
+endif
+
 else
 
 SRC = extended_keymap_common.c \
-	matrix_pcb.c \
+	analog.c \
 	led.c \
-	backlight.c
+	backlight.c \
+	beeps.c 
 
 ifdef KEYMAP
     SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
@@ -76,6 +83,12 @@ else
     SRC := extended_keymaps/extended_keymap_default.c $(SRC)
 endif
 
+ifdef MATRIX
+    SRC := matrix_$(MATRIX).c $(SRC)
+else
+    SRC := matrix_pcb.c $(SRC)
+endif
+
 endif
 
 CONFIG_H = config.h
diff --git a/keyboard/planck/backlight.c b/keyboard/planck/backlight.c
index 06f103b4ac..90b1db874f 100644
--- a/keyboard/planck/backlight.c
+++ b/keyboard/planck/backlight.c
@@ -8,42 +8,42 @@ void backlight_init_ports()
 {
 
     // Setup PB7 as output and output low.
-    DDRB |= (1<<7);
-    PORTB &= ~(1<<7);
+    // DDRB |= (1<<7);
+    // PORTB &= ~(1<<7);
     
-    // Use full 16-bit resolution. 
-    ICR1 = 0xFFFF;
+    // // Use full 16-bit resolution. 
+    // ICR1 = 0xFFFF;
 
-    // I could write a wall of text here to explain... but TL;DW
-    // Go read the ATmega32u4 datasheet.
-    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    // // I could write a wall of text here to explain... but TL;DW
+    // // Go read the ATmega32u4 datasheet.
+    // // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
     
-    // Pin PB7 = OCR1C (Timer 1, Channel C)
-    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-    // (i.e. start high, go low when counter matches.)
-    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    // // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // // (i.e. start high, go low when counter matches.)
+    // // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
     
-    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
-    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+    // TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    // TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
 
     backlight_init();
 }
 
 void backlight_set(uint8_t level)
 {
-    if ( level == 0 )
-    {
-        // Turn off PWM control on PB7, revert to output low.
-        TCCR1A &= ~(_BV(COM1C1));
-        // CHANNEL = level << OFFSET | 0x0FFF;
-        CHANNEL = ((1 << level) - 1);
-    }
-    else
-    {
-        // Turn on PWM control of PB7
-        TCCR1A |= _BV(COM1C1);
-        // CHANNEL = level << OFFSET | 0x0FFF;
-        CHANNEL = ((1 << level) - 1);
-    }
+    // if ( level == 0 )
+    // {
+    //     // Turn off PWM control on PB7, revert to output low.
+    //     TCCR1A &= ~(_BV(COM1C1));
+    //     // CHANNEL = level << OFFSET | 0x0FFF;
+    //     CHANNEL = ((1 << level) - 1);
+    // }
+    // else
+    // {
+    //     // Turn on PWM control of PB7
+    //     TCCR1A |= _BV(COM1C1);
+    //     // CHANNEL = level << OFFSET | 0x0FFF;
+    //     CHANNEL = ((1 << level) - 1);
+    // }
 }
\ No newline at end of file
diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h
index 4e49a2b897..f621ac5ecc 100644
--- a/keyboard/planck/config.h
+++ b/keyboard/planck/config.h
@@ -59,10 +59,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* disable debug print */
-//#define NO_DEBUG
+#define NO_DEBUG
 
 /* disable print */
-//#define NO_PRINT
+#define NO_PRINT
 
 /* disable action features */
 //#define NO_ACTION_LAYER
diff --git a/keyboard/planck/extended_keymap_common.c b/keyboard/planck/extended_keymap_common.c
index 841b249431..ade8508444 100644
--- a/keyboard/planck/extended_keymap_common.c
+++ b/keyboard/planck/extended_keymap_common.c
@@ -24,7 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debug.h"
 #include "backlight.h"
 
-
 static action_t keycode_to_action(uint16_t keycode);
 
 
@@ -70,6 +69,9 @@ action_t action_for_key(uint8_t layer, keypos_t key)
     } else if (keycode == RESET) {
         bootloader_jump();
         return;
+    } else if (keycode > RESET) {
+        // MIDI
+        return;
     }
 
     switch (keycode) {
diff --git a/keyboard/planck/extended_keymap_common.h b/keyboard/planck/extended_keymap_common.h
index 21d8978b7b..2dce4a2fac 100644
--- a/keyboard/planck/extended_keymap_common.h
+++ b/keyboard/planck/extended_keymap_common.h
@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "action_macro.h"
 #include "report.h"
 #include "host.h"
-#include "print.h"
+// #include "print.h"
 #include "debug.h"
 
 #ifdef BOOTMAGIC_ENABLE
@@ -174,4 +174,6 @@ extern const uint16_t fn_actions[];
 
 #define RESET 0x5000
 
+#define MIDI(n) n | 0x6000
+
 #endif
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_default.c b/keyboard/planck/extended_keymaps/extended_keymap_default.c
index c35b283675..8bf1a0c87b 100644
--- a/keyboard/planck/extended_keymaps/extended_keymap_default.c
+++ b/keyboard/planck/extended_keymaps/extended_keymap_default.c
@@ -5,7 +5,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,   KC_BSPC},
   {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT},
   {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT},
-  {BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2),    KC_SPC,   KC_SPC,    FUNC(1),   KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT}
+  {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2),    KC_SPC,   KC_SPC,    FUNC(1),   KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT}
                                                 // Space is repeated to accommadate for both spacebar wiring positions
 },
 [1] = { /* Colemak */
@@ -16,19 +16,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 },
 [2] = { /* RAISE */
   {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
-  {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-  {KC_TRNS, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20, KC_TRNS},
+  {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {KC_TRNS, KC_F11,  KC_F12,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS},
   {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,   KC_TRNS,  FUNC(1),   KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 },
 [3] = { /* LOWER */
   {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),    S(KC_5),    S(KC_6),    S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0), KC_BSPC},
-  {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL),  S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+  {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL),  S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
   {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS},
   {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2),   KC_TRNS,   KC_TRNS,   KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
 }
 };
 
-
 const uint16_t PROGMEM fn_actions[] = {
     [1] = ACTION_LAYER_MOMENTARY(2),  // to RAISE
     [2] = ACTION_LAYER_MOMENTARY(3),  // to LOWER
@@ -41,10 +40,15 @@ const uint16_t PROGMEM fn_actions[] = {
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) 
 {
   // MACRODOWN only works in this function
-    switch(id) {
-      case 0:
-        return MACRODOWN(T(CM_T), END);
-      break;
-    } 
+      switch(id) {
+        case 0:   
+        if (record->event.pressed) {
+          register_code(KC_RSFT);
+          ACTION_BACKLIGHT_STEP();
+        } else {
+          unregister_code(KC_RSFT);
+        }
+        break;
+      } 
     return MACRO_NONE;
 };
diff --git a/keyboard/planck/keymap_common.h b/keyboard/planck/keymap_common.h
index 4a0bcfbb08..d46df92876 100644
--- a/keyboard/planck/keymap_common.h
+++ b/keyboard/planck/keymap_common.h
@@ -25,7 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "action_macro.h"
 #include "report.h"
 #include "host.h"
-#include "print.h"
+// #include "print.h"
 #include "debug.h"
 #include "keymap.h"
 
diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c
index 2f2dbdb108..2ae69c3c80 100644
--- a/keyboard/planck/matrix.c
+++ b/keyboard/planck/matrix.c
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdbool.h>
 #include <avr/io.h>
 #include <util/delay.h>
-#include "print.h"
+// #include "print.h"
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
diff --git a/keyboard/planck/matrix_center.c b/keyboard/planck/matrix_center.c
index 8e34130d6f..2a603f334b 100644
--- a/keyboard/planck/matrix_center.c
+++ b/keyboard/planck/matrix_center.c
@@ -23,10 +23,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <avr/io.h>
 #include <util/delay.h>
 #include "action_layer.h"
-#include "print.h"
+// #include "print.h"
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
+#include "analog.h"
 
 
 #ifndef DEBOUNCE
@@ -40,9 +41,14 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
 static matrix_row_t read_cols(void);
 static void init_cols(void);
+static void init_encoder(void);
+static void init_pot(void);
 static void unselect_rows(void);
 static void select_row(uint8_t row);
-
+int16_t analogRead(uint8_t pin);
+uint8_t state;
+int32_t position;
+int16_t value;
 
 inline
 uint8_t matrix_rows(void)
@@ -61,6 +67,8 @@ void matrix_init(void)
     // initialize row and col
     unselect_rows();
     init_cols();
+    init_encoder();
+    init_pot();
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -69,6 +77,50 @@ void matrix_init(void)
     }
 }
 
+static void init_encoder(void)
+{
+    DDRC &= ~(1<<6 | 1<<7);
+    PORTC |=  (1<<6 | 1<<7);
+
+    uint8_t s = 0;
+    _delay_ms(1);
+    if (PINC&(1<<6)) s |= 1;
+    if (PINC&(1<<7)) s |= 2;
+    state = s;
+    position = 0;
+}
+
+void read_encoder(void)
+{
+    uint8_t s = state & 3;
+    if (PINC&(1<<6)) s |= 4;
+    if (PINC&(1<<7)) s |= 8;
+    state = (s >> 2);
+    switch (s) {
+        case 1: case 7: case 8: case 14:
+            position++; 
+            break;
+        case 2: case 4: case 11: case 13:
+            position--; 
+            break;
+        case 3: case 12:
+            position += 2; 
+            break;
+        case 6: case 9:
+            position -= 2; 
+            break;
+    }
+}
+
+#define HEX(n) (((n) < 10) ? ((n) + '0') : ((n) + 'A' - 10))
+
+static void init_pot(void)
+{
+    // DDRD &= ~(1<<4);
+    // PORTD |=  (1<<4);
+    // DIDR2 = (1<<0);
+}
+
 uint8_t matrix_scan(void)
 {
     for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
@@ -95,6 +147,21 @@ uint8_t matrix_scan(void)
         }
     }
 
+    read_encoder();
+    if (position >= 2) {
+        register_code(KC_AUDIO_VOL_UP);
+        unregister_code(KC_AUDIO_VOL_UP);
+        position = 0;
+    } else if (position <= -2) {
+        register_code(KC_AUDIO_VOL_DOWN);
+        unregister_code(KC_AUDIO_VOL_DOWN);
+        position = 0;
+    }
+
+    // uint16_t val = analogRead(11);
+
+    // debug("analogRead: "); debug_hex(val); debug("\n");
+
     return 1;
 }
 
diff --git a/keyboard/planck/matrix_pcb.c b/keyboard/planck/matrix_pcb.c
index 7d46baf3de..48510cd833 100644
--- a/keyboard/planck/matrix_pcb.c
+++ b/keyboard/planck/matrix_pcb.c
@@ -23,13 +23,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdbool.h>
 #include <avr/io.h>
 #include <util/delay.h>
-#include "print.h"
+// #include "print.h"
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
 #include "backlight.h" // TODO fix this dependency 
 
-
 #ifndef DEBOUNCE
 #   define DEBOUNCE 10
 #endif
@@ -67,7 +66,7 @@ void matrix_init(void)
     // Turn status LED on
     DDRE |= (1<<6);
     PORTE |= (1<<6);
-    
+
     // initialize row and col
     unselect_rows();
     init_cols();