Add maartenwut's handwire build

5 files changed, 194 insertions, 0 deletions

diff --git a/keyboards/handwired/maartenwut/config.h b/keyboards/handwired/maartenwut/config.h
new file mode 100755
index 0000000000..066f138560
--- /dev/null
+++ b/keyboards/handwired/maartenwut/config.h
@@ -0,0 +1,45 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBB80
+#define PRODUCT_ID      0x050D
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Maartenwut
+#define PRODUCT         Ortho
+#define DESCRIPTION     Handwired ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F0, F1, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define QMK_ESC_OUTPUT C6 // usually COL
+#define QMK_ESC_INPUT D0 // usually ROW
+
+#endif
\ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/keymaps/default/keymap.c b/keyboards/handwired/maartenwut/keymaps/default/keymap.c
new file mode 100755
index 0000000000..1c9eff9d81
--- /dev/null
+++ b/keyboards/handwired/maartenwut/keymaps/default/keymap.c
@@ -0,0 +1,46 @@
+#include "maartenwut.h"
+
+#define _MA 0
+#define _NU 1
+#define _FL 2
+#define _GA 3
+#define _AR 4
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP(
+    KC_GRV,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,	KC_EQL,		KC_BSPC,
+    KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_LBRC,	KC_RBRC,	KC_BSLS,
+    KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT,	KC_DEL,		KC_ENT,
+    LSHIFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	KC_UP,		KC_PSCR,
+    KC_LCTL,	KC_LGUI,	KC_LALT,	MO(_NU),				SPACE,					KC_SPC,					MO(_FL),	KC_RALT,	KC_LEFT,	KC_DOWN,	KC_RGHT),
+[_NU] = KEYMAP(
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_7,		KC_8,		KC_9,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    KC_CAPS,	KC_4,		KC_5,		KC_6,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_1,		KC_2,		KC_3,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	KC_0,		_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______),
+[_FL] = KEYMAP(
+    _______,	KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		KC_MPLY,
+    RESET,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	TG(_GA),	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______),
+[_GA] = KEYMAP(
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    KC_LSFT,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				KC_SPC,					_______,				_______,	_______,	_______,	_______,	_______),
+[_AR] = KEYMAP(
+    _______,	KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+    _______,	_______,	_______,	_______,				_______,				_______,				_______,	_______,	_______,	_______,	_______)
+};
\ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/maartenwut.c b/keyboards/handwired/maartenwut/maartenwut.c
new file mode 100755
index 0000000000..6a7c5cee62
--- /dev/null
+++ b/keyboards/handwired/maartenwut/maartenwut.c
@@ -0,0 +1,13 @@
+#include "maartenwut.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
\ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/maartenwut.h b/keyboards/handwired/maartenwut/maartenwut.h
new file mode 100755
index 0000000000..0e47d63861
--- /dev/null
+++ b/keyboards/handwired/maartenwut/maartenwut.h
@@ -0,0 +1,23 @@
+#ifndef MAARTENWUT_H
+#define MAARTENWUT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+  k40, k41, k42, k43,      k45,      k47,      k49, k4a, k4b, k4c, k4d \
+) \
+{ \
+  {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+  {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+  {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+  {k40, k41, k42, k43, XXX, k45, XXX, k47, XXX, k49, k4a, k4b, k4c, k4d} \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/rules.mk b/keyboards/handwired/maartenwut/rules.mk
new file mode 100755
index 0000000000..7ed63c65ec
--- /dev/null
+++ b/keyboards/handwired/maartenwut/rules.mk
@@ -0,0 +1,67 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6