Merge remote-tracking branch 'origin/master' into develop

5 files changed, 162 insertions, 7 deletions

diff --git a/keyboards/crkbd/keymaps/xyverz/rules.mk b/keyboards/crkbd/keymaps/xyverz/rules.mk
index ed8a77f819..1d320c0f35 100644
--- a/keyboards/crkbd/keymaps/xyverz/rules.mk
+++ b/keyboards/crkbd/keymaps/xyverz/rules.mk
@@ -1,2 +1 @@
-OLED_DRIVER_ENABLE  = no
-RGB_MATRIX_ENABLE = yes
\ No newline at end of file
+OLED_DRIVER_ENABLE  = yes
\ No newline at end of file
diff --git a/keyboards/hidtech/bastyl/keymaps/xyverz/config.h b/keyboards/hidtech/bastyl/keymaps/xyverz/config.h
new file mode 100644
index 0000000000..d7baf99376
--- /dev/null
+++ b/keyboards/hidtech/bastyl/keymaps/xyverz/config.h
@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Select hand configuration */
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 300
\ No newline at end of file
diff --git a/keyboards/hidtech/bastyl/keymaps/xyverz/keymap.c b/keyboards/hidtech/bastyl/keymaps/xyverz/keymap.c
new file mode 100644
index 0000000000..0ed6ca94e7
--- /dev/null
+++ b/keyboards/hidtech/bastyl/keymaps/xyverz/keymap.c
@@ -0,0 +1,100 @@
+/* 
+ * Copyright 2021 Ian Sterling <xyverz on Github.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names { _WINDOWS, _MAC, _LOWER, _RAISE, _ADJUST };
+
+enum custom_keycodes { WINDOWS = SAFE_RANGE, MAC, ADJUST };
+
+// Aliases to keep the keymap tidy
+#define GUIBSPC GUI_T(KC_BSPC)  // GUI when held, BSPC when tapped.
+#define RGB_SWR RGB_M_SW        // Swirl Animation alias
+#define RGB_SNK RGB_M_SN        // Snake Animation alias
+#define MACLOCK LGUI(LCTL(KC_Q)) // Lock my MacBook!
+#define WINLOCK LGUI(KC_L)      // Lock my PC!
+#define DELGUI GUI_T(KC_DEL)
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+
+#define MACLOCK LGUI(LCTL(KC_Q)) // Lock my MacBook!
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_WINDOWS] = LAYOUT(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,        KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+  KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,        KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,        KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                             LOWER,   KC_BSPC, KC_DEL,      KC_ENT,  KC_SPC,  RAISE,
+                                      KC_LCTL, KC_LALT,     KC_RGUI, KC_RCTL
+  ),
+
+[_MAC] = LAYOUT(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,        KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+  KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,        KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,        KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                             LOWER,   KC_BSPC, DELGUI,      KC_ENT,  KC_SPC,  RAISE,
+                                      KC_LCTL, KC_LALT,     KC_RGUI, KC_RCTL
+  ),
+
+[_LOWER] = LAYOUT(
+  KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12, 
+  RESET,   _______, _______, KC_UP,   _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______,
+  KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME,     KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+  _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END,      KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
+                             _______, KC_DEL,  _______,     _______, _______, _______,
+                                      MACLOCK, _______,     _______, WINLOCK
+  ),
+
+[_RAISE] = LAYOUT(
+  KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12, 
+  _______, _______, _______, KC_UP,   _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, RESET,
+  KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME,     KC_PGUP, _______, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+  _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END,      KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
+                             _______, KC_DEL,  _______,     _______, _______, _______,
+                                      MACLOCK, _______,     _______, WINLOCK
+  ),
+
+[_ADJUST] = LAYOUT(
+  _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+  _______, RESET,   _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______,     _______, WINDOWS, MAC,     _______, _______, _______,
+  _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+                             _______, _______, _______,     _______, _______, _______,
+                                      _______, _______,     _______, _______
+  ),
+
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); };
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch (keycode) {
+            case WINDOWS:
+                set_single_persistent_default_layer(_WINDOWS);
+                return false;
+            case MAC:
+                set_single_persistent_default_layer(_MAC);
+                return false;
+        }
+    }
+    return true;
+}
diff --git a/keyboards/hidtech/bastyl/keymaps/xyverz/readme.md b/keyboards/hidtech/bastyl/keymaps/xyverz/readme.md
new file mode 100644
index 0000000000..f21f030a89
--- /dev/null
+++ b/keyboards/hidtech/bastyl/keymaps/xyverz/readme.md
@@ -0,0 +1,22 @@
+# Bastyl
+
+A split ergonomic keyboard.
+
+* Keyboard Maintainer: [HID Technologies](https://github.com/HID-Technologies)
+* Hardware Supported: elite-C V4
+* Hardware Availability: [Hidtech.ca](https://www.hidtech.ca/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make hidtech/bastyl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+See the [keyboard build instructions](https://hid-technologies.github.io/Bastyl-DIY-instructions/)
+
+
+## Important information regarding the reset
+
+If you modify this firmware, make sure to always have a RESET key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up.
+
+Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button.
diff --git a/layouts/community/ortho_5x12/xyverz/rules.mk b/layouts/community/ortho_5x12/xyverz/rules.mk
index 63c544ad57..c777483254 100644
--- a/layouts/community/ortho_5x12/xyverz/rules.mk
+++ b/layouts/community/ortho_5x12/xyverz/rules.mk
@@ -12,13 +12,14 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 
-ifneq ("$(KEYBOARD)","nyquist")
-  RGBLIGHT_ENABLE = yes
-  BACKLIGHT_ENABLE = yes
-else
+
+#ifneq ("$(KEYBOARD)","nyquist")
+#  RGBLIGHT_ENABLE = yes
+#  BACKLIGHT_ENABLE = yes
+#else
   RGBLIGHT_ENABLE = no
   BACKLIGHT_ENABLE = no
-endif
+#endif
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend