Keyboard: adding Sentraq S65-Plus (#3406)

* New keyboard 'Sentraq S65-Plus'

* Change ANSI_KEYMAP to LAYOUT_ansi

* Use QMK_KEYBOARD_H as include

6 files changed, 235 insertions, 0 deletions

diff --git a/keyboards/s65_plus/config.h b/keyboards/s65_plus/config.h
new file mode 100644
index 0000000000..df60e60a8d
--- /dev/null
+++ b/keyboards/s65_plus/config.h
@@ -0,0 +1,55 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define PRODUCT         S65-PLUS
+#define DESCRIPTION     q.m.k. keyboard firmware for S65-PLUS
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Sentraq
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 18
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, E6, B0, B1, D5, B2, B3, D0, D1, D2, D4, D6, D7, F7 }
+#define UNUSED_PINS
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#endif
diff --git a/keyboards/s65_plus/keymaps/default/keymap.c b/keyboards/s65_plus/keymaps/default/keymap.c
new file mode 100644
index 0000000000..04f6926de1
--- /dev/null
+++ b/keyboards/s65_plus/keymaps/default/keymap.c
@@ -0,0 +1,53 @@
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _AL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: Main layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │ F1  │ F2  │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│ DEL │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │ F3  │ F4  │ TAB │▒▒▒▒▒│  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │PG_UP│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │ F5  │ F6  │CAPSL│▒▒▒▒▒│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│PG_DN│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │ F7  │ F8  │▒▒▒▒▒│LSHFT│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│ UP  │ END │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │ F9  │ F10 │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │RCTL │LEFT │DOWN │RIGHT│
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 0: ANSI qwerty */
+  [_BL] = LAYOUT_ansi(
+      KC_F1, KC_F2,  KC_ESC,  KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,  KC_DEL, \
+      KC_F3, KC_F4,  KC_TAB,           KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  KC_PGUP, \
+      KC_F5, KC_F6,  KC_CAPS,          KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,   KC_PGDN, \
+      KC_F7, KC_F8,           KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,    KC_END, \
+      KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,           KC_RALT, MO(_AL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+
+  /* 1: LED layer
+   *  ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   *  │     │     │RESET│     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│BLTOG│BLSTP│
+   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   *  │     │     │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │     │     │     │     │
+   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   *  │     │     │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │     │
+   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   *  │     │     │▒▒▒▒▒│     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│UGVAI│UGVAD│     │     │▒▒▒▒▒│     │VOLU │     │
+   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   *  │     │     │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │PREV │VOLD │NEXT │
+   *  └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  [_AL] = LAYOUT_ansi(
+      KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          BL_TOGG, BL_STEP,  \
+      KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS,          KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS,          KC_TRNS, KC_VOLU, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/s65_plus/readme.md b/keyboards/s65_plus/readme.md
new file mode 100644
index 0000000000..426a6612d8
--- /dev/null
+++ b/keyboards/s65_plus/readme.md
@@ -0,0 +1,14 @@
+S65-PLUS
+=====
+
+DIY 65% keyboard from Sentraq.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: S65-PLUS PCB  
+Hardware Availability: https://sentraq.com/collections/kits/products/s65-plus-diy-keyboard-kit
+
+Make example for this keyboard (after setting up your build environment):
+
+    make s65_plus:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/s65_plus/rules.mk b/keyboards/s65_plus/rules.mk
new file mode 100644
index 0000000000..08dd2d93c8
--- /dev/null
+++ b/keyboards/s65_plus/rules.mk
@@ -0,0 +1,66 @@
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes      # Enable RGB light
diff --git a/keyboards/s65_plus/s65_plus.c b/keyboards/s65_plus/s65_plus.c
new file mode 100644
index 0000000000..3eaaa37174
--- /dev/null
+++ b/keyboards/s65_plus/s65_plus.c
@@ -0,0 +1,24 @@
+#include "s65_plus.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+  matrix_init_user();
+};
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+  matrix_scan_user();
+};
+
+void led_set_kb(uint8_t usb_led) {
+  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    // Turn capslock on
+    PORTB &= ~(1<<7);
+  } else {
+    // Turn capslock off
+    PORTB |= (1<<7);
+  }
+}
diff --git a/keyboards/s65_plus/s65_plus.h b/keyboards/s65_plus/s65_plus.h
new file mode 100644
index 0000000000..2ff445f6c9
--- /dev/null
+++ b/keyboards/s65_plus/s65_plus.h
@@ -0,0 +1,23 @@
+#ifndef S60PLUS_H
+#define S60PLUS_H
+
+#include "quantum.h"
+
+#define LAYOUT_ansi( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,       K016, K017, \
+  K100, K101, K102,       K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, \
+  K200, K201, K202,       K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,       K216, K217, \
+  K300, K301,       K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, K316, K317, \
+  K400, K401, K402, K403, K404,                   K408,                   K412, K413, K414, K415, K416, K417  \
+) { \
+  { K000, K001, K002,  K003,  K004,  K005,  K006,  K007,  K008, K009,  K010,  K011,  K012, K013, K014,  KC_NO, K016, K017 }, \
+  { K100, K101, K102,  KC_NO, K104,  K105,  K106,  K107,  K108, K109,  K110,  K111,  K112, K113, K114,  K115,  K116, K117 }, \
+  { K200, K201, K202,  KC_NO, K204,  K205,  K206,  K207,  K208, K209,  K210,  K211,  K212, K213, K214,  KC_NO, K216, K217 }, \
+  { K300, K301, KC_NO, K303,  K304,  K305,  K306,  K307,  K308, K309,  K310,  K311,  K312, K313, KC_NO, K315,  K316, K317 }, \
+  { K400, K401, K402,  K403,  K404,  KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, K412, K413, K414,  K415,  K416, K417 }  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif