Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

4 files changed, 47 insertions, 8 deletions

diff --git a/build_keyboard.mk b/build_keyboard.mk
index 61aebf3935..055ce632ae 100644
--- a/build_keyboard.mk
+++ b/build_keyboard.mk
@@ -199,6 +199,7 @@ endif
 VPATH += $(KEYBOARD_PATH)
 VPATH += $(COMMON_VPATH)
 
+include $(TMK_PATH)/protocol.mk
 
 include $(TMK_PATH)/common.mk
 SRC += $(TMK_COMMON_SRC)
diff --git a/quantum/config_common.h b/quantum/config_common.h
index 8ed5f4a106..6b525fe1c6 100644
--- a/quantum/config_common.h
+++ b/quantum/config_common.h
@@ -76,10 +76,9 @@
         } while(0)
 #   else
 #       error "USART configuration is needed."
+#   endif
 #endif
 
-// I'm fairly sure these aren't needed, but oh well - Jack
-
 /*
  * PS/2 Interrupt configuration
  */
@@ -125,4 +124,3 @@
 
 #endif
 
-#endif
diff --git a/readme.md b/readme.md
index 8615b48d55..0157b90724 100644
--- a/readme.md
+++ b/readme.md
@@ -1157,6 +1157,45 @@ The firmware supports 5 different light effects, and the color (hue, saturation,
 
 Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20.
 
+## PS/2 Mouse Support
+
+Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device.
+In order to do this you must first enable the option in your Makefile.
+
+    PS2_MOUSE_ENABLE = yes
+
+Then, decide whether to use interrupts (better if your microcontroller supports them) or busywait, and enable the relevant option.
+
+    PS2_USE_INT = yes
+    // PS2_USE_BUSYWAIT = yes
+
+If you're using a teensy and have hooked up the clock on your PS/2 device to D1 and the data to D0, you're all set.
+Otherwise, you will need to update the following defines in your `config.h`:
+    
+    #define PS2_CLOCK_PORT  PORTD
+    #define PS2_CLOCK_PIN   PIND
+    #define PS2_CLOCK_DDR   DDRD
+    #define PS2_CLOCK_BIT   1
+
+    #define PS2_DATA_PORT   PORTD
+    #define PS2_DATA_PIN    PIND
+    #define PS2_DATA_DDR    DDRD
+    #define PS2_DATA_BIT    0
+
+And with `PS2_USE_INT` also define these macros:
+
+    #define PS2_INT_INIT()  do {    \
+        EICRA |= ((1<<ISC11) |      \
+                  (0<<ISC10));      \
+    } while (0)
+    #define PS2_INT_ON()  do {      \
+        EIMSK |= (1<<INT1);         \
+    } while (0)
+    #define PS2_INT_OFF() do {      \
+        EIMSK &= ~(1<<INT1);        \
+    } while (0)
+    #define PS2_INT_VECT    INT1_vect
+
 ## Safety Considerations
 
 You probably don't want to "brick" your keyboard, making it impossible
diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c
index 8a7272bbc5..0c81e83612 100644
--- a/tmk_core/common/avr/suspend.c
+++ b/tmk_core/common/avr/suspend.c
@@ -47,6 +47,7 @@ void suspend_idle(uint8_t time)
     sleep_disable();
 }
 
+#ifndef NO_SUSPEND_POWER_DOWN
 /* Power down MCU with watchdog timer
  * wdto: watchdog timer timeout defined in <avr/wdt.h>
  *          WDTO_15MS
@@ -61,6 +62,7 @@ void suspend_idle(uint8_t time)
  *          WDTO_8S
  */
 static uint8_t wdt_timeout = 0;
+
 static void power_down(uint8_t wdto)
 {
 #ifdef PROTOCOL_LUFA
@@ -98,19 +100,19 @@ static void power_down(uint8_t wdto)
     // Disable watchdog after sleep
     wdt_disable();
 }
+#endif
 
 void suspend_power_down(void)
 {
+#ifndef NO_SUSPEND_POWER_DOWN
     power_down(WDTO_15MS);
+#endif
 }
 
 __attribute__ ((weak)) void matrix_power_up(void) {}
 __attribute__ ((weak)) void matrix_power_down(void) {}
 bool suspend_wakeup_condition(void)
 {
-#ifdef BACKLIGHT_ENABLE
-    backlight_set(0);
-#endif
     matrix_power_up();
     matrix_scan();
     matrix_power_down();
@@ -126,10 +128,9 @@ void suspend_wakeup_init(void)
     // clear keyboard state
     clear_keyboard();
 #ifdef BACKLIGHT_ENABLE
-    backlight_set(0);
     backlight_init();
 #endif
-led_set(host_keyboard_leds());
+	led_set(host_keyboard_leds());
 }
 
 #ifndef NO_SUSPEND_POWER_DOWN