Merge pull request #8 from JeffreySung/master

Apple IIgs(A9M0330)/Standard(M0116) keyboard

9 files changed, 737 insertions, 0 deletions

diff --git a/keyboard/IIgs_Standard/Makefile b/keyboard/IIgs_Standard/Makefile
new file mode 100644
index 0000000000..c18e9720c7
--- /dev/null
+++ b/keyboard/IIgs_Standard/Makefile
@@ -0,0 +1,95 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = IIgs_Standard
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	keymap.c \
+	matrix.c \
+	led.c 
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+#MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = no	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/IIgs_Standard/README b/keyboard/IIgs_Standard/README
new file mode 100644
index 0000000000..48d9470f62
--- /dev/null
+++ b/keyboard/IIgs_Standard/README
@@ -0,0 +1,45 @@
+Replacable USB Controller for Apple IIgs/Standard(M0116)

+JeffreySung(nattyman@gmail.com)

+

+===============================

+

+Feature

+-------

+- Replaceable keyboard controller for Apple IIgs(A9M0330)/Standard(M0116)

+- Teensy++ 2.0 required

+- Some signal bypass required

+- ADB keyboard doesn't use matrix for modifier keys. With virtual row for modifier keys, 

+  these keys are merged into key matrix using virtual row.

+  

+History

+=======

+- 2012.09.17 First Release

+- 2012.09.17 CapsLock support

+- 2012.09.19 Power button added

+Build

+=====

+0. Just Type "Make" and return.

+

+Hardware

+========

+PJRC Teensy

+-----------

+0. The following ports should not be connected to board.

+   From top view of Teensy++, from GND and counter clock wise.

+    -7,26(in keyboard PCB, these pins are VDD,GND)

+	-30,31(in Teensy++, these pins are Ref,GND respectively)

+	-5,6(D2,D3  for bluetooth in future)

+1. Bypass #31 pin(from board) to E4(Teensy)

+2. Bypass #30 pin(from board) to F2(Teensy)

+3. Bypass #6  pin(from board) to A0(Teensy)

+4. Refer doc directory

+

+To Do

+=====

+0. When DEBOUNCE defined, there is a errors.

+1. Layer Change by toggling Clear Key

+2. Eject Key add. (following files should be modified.)

+		common/usb_keycodes.h

+		common/keyboard.c

+3. Use bluetooth

+EOF

diff --git a/keyboard/IIgs_Standard/config.h b/keyboard/IIgs_Standard/config.h
new file mode 100644
index 0000000000..38ac21df66
--- /dev/null
+++ b/keyboard/IIgs_Standard/config.h
@@ -0,0 +1,68 @@
+/*

+Copyright 2011 Jun Wako <wakojun@gmail.com>

+

+This program is free software: you can redistribute it and/or modify

+it under the terms of the GNU General Public License as published by

+the Free Software Foundation, either version 2 of the License, or

+(at your option) any later version.

+

+This program is distributed in the hope that it will be useful,

+but WITHOUT ANY WARRANTY; without even the implied warranty of

+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+GNU General Public License for more details.

+

+You should have received a copy of the GNU General Public License

+along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#ifndef CONFIG_H

+#define CONFIG_H

+

+/* controller configuration */

+#include "controller_teensy.h"

+

+

+/* USB Device descriptor parameter */

+/* for Apple 

+#define VENDOR_ID       0x05AC

+#define PRODUCT_ID      0xBEE0

+*/

+#define VENDOR_ID       0xFEED

+#define PRODUCT_ID      0xBEE0

+#define DEVICE_VER      0x0202

+#define MANUFACTURER    t.m.k.

+#define PRODUCT         Apple Desktop Bus Keyboard

+

+

+/* message strings */

+#define DESCRIPTION     Apple M0116/A9M0660 keyboard firmware

+

+

+/* matrix size */

+#define MATRIX_ROWS 11	// last row is virtual for modifier

+#define MATRIX_COLS 8

+/* define if matrix has ghost */

+#define MATRIX_HAS_GHOST

+/* Set 0 if need no debouncing */

+#define DEBOUNCE    5

+

+

+/* key combination for command */

+#define IS_COMMAND() ( \

+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \

+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \

+)

+

+

+/* layer switching */

+#define LAYER_SWITCH_DELAY 100

+#define LAYER_SEND_FN_TERM 300

+

+

+/* mouse keys */

+#ifdef MOUSEKEY_ENABLE

+#   define MOUSEKEY_DELAY_TIME 192

+#endif

+

+

+#endif

diff --git a/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg b/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg
new file mode 100644
index 0000000000..2998f0c3f8
--- /dev/null
+++ b/keyboard/IIgs_Standard/doc/PIN_BYPASS.jpg
diff --git a/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg b/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg
new file mode 100644
index 0000000000..146c1ab93c
--- /dev/null
+++ b/keyboard/IIgs_Standard/doc/Teensy++_Mod.jpg
diff --git a/keyboard/IIgs_Standard/hid_listen.mac b/keyboard/IIgs_Standard/hid_listen.mac
new file mode 100755
index 0000000000..8758fdf886
--- /dev/null
+++ b/keyboard/IIgs_Standard/hid_listen.mac
diff --git a/keyboard/IIgs_Standard/keymap.c b/keyboard/IIgs_Standard/keymap.c
new file mode 100644
index 0000000000..77f3cd4d3b
--- /dev/null
+++ b/keyboard/IIgs_Standard/keymap.c
@@ -0,0 +1,142 @@
+/*

+Copyright 2012 Jeffrey Sung <nattyman@gmail.com>

+

+This program is free software: you can redistribute it and/or modify

+it under the terms of the GNU General Public License as published by

+the Free Software Foundation, either version 2 of the License, or

+(at your option) any later version.

+

+This program is distributed in the hope that it will be useful,

+but WITHOUT ANY WARRANTY; without even the implied warranty of

+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+GNU General Public License for more details.

+

+You should have received a copy of the GNU General Public License

+along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+/* 

+ * Keymap for Apple IIgs/Standard Keyboard

+ */

+#include <stdint.h>

+#include <stdbool.h>

+#include <avr/pgmspace.h>

+#include "usb_keycodes.h"

+#include "print.h"

+#include "debug.h"

+#include "util.h"

+#include "keymap.h"

+

+

+// Convert physical keyboard layout to matrix array.

+// This is a macro to define keymap easily in keyboard layout form.

+#define KEYMAP( R10C5, \

+    R3C7, R3C6, R3C5, R3C4, R3C3, R3C2, R3C1, R8C1, R8C0, R3C0, R0C0, R0C1, R0C2, R0C3, R4C4, R4C5, R4C6, R4C7, \

+    R9C7, R9C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, R1C0, R1C1, R1C2, R1C3, R1C4,       R2C4, R2C5, R2C6, R2C3, \

+    R10C0,R7C7, R7C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, R0C4, R1C6, R1C7, R1C5,       R2C0, R2C1, R2C2, R2C7, \

+    R10C1,R6C7, R6C6, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, R0C5, R0C6, 					R4C0, R4C1, R4C2, \

+    R10C4,R10C2,R10C3,R5C4, R5C7, R5C5, R5C6, R5C0, R5C2, R0C7,							R5C1, R5C3, R4C3 \

+) { \

+    { R0C0, R0C1,  R0C2,  R0C3,  R0C4, R0C5,  R0C6,  R0C7 }, \

+    { R1C0, R1C1,  R1C2,  R1C3,  R1C4, R1C5,  R1C6,  R1C7 }, \

+    { R2C0, R2C1,  R2C2,  R2C3,  R2C4, R2C5,  R2C6,  R2C7 }, \

+    { R3C0, R3C1,  R3C2,  R3C3,  R3C4, R3C5,  R3C6,  R3C7 }, \

+    { R4C0, R4C1,  R4C2,  R4C3,  R4C4, R4C5,  R4C6,  R4C7 }, \

+    { R5C0, R5C1,  R5C2,  R5C3,  R5C4, R5C5,  R5C6,  R5C7 }, \

+    { R6C0, R6C1,  R6C2,  R6C3,  R6C4, R6C5,  R6C6,  R6C7 }, \

+    { R7C0, R7C1,  R7C2,  R7C3,  R7C4, R7C5,  R7C6,  R7C7 }, \

+    { R8C0, R8C1,  KB_NO, KB_NO, KB_NO,KB_NO, KB_NO, KB_NO }, \

+    { R9C0, R9C1,  R9C2,  R9C3,  R9C4, R9C5,  R9C6,  R9C7 }, \

+	{ R10C0,R10C1, R10C2, R10C3, R10C4,R10C5, KB_NO, KB_NO} \

+}

+

+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))

+

+

+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.

+static const uint8_t PROGMEM fn_layer[] = {

+    0,              // Fn0

+    1,              // Fn1

+    2,              // Fn2

+    3,              // Fn3

+    4,              // Fn4

+    0,              // Fn5

+    3,              // Fn6

+    3               // Fn7

+};

+

+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.

+// See layer.c for details.

+static const uint8_t PROGMEM fn_keycode[] = {

+    KB_NO,          // Fn0

+    KB_NO,          // Fn1

+    KB_SLSH,        // Fn2

+    KB_SCLN,        // Fn3

+    KB_SPC,         // Fn4

+    KB_NO,          // Fn5

+    KB_NO,          // Fn6

+    KB_NO           // Fn7

+};

+

+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

+    /* Layer 0: Default Layer

+     * ,-----------------------------------------------------------. ,---------------,

+     * |                    POWER                                  | |               |  

+     * |-----------------------------------------------------------| |---------------|

+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |FN0| = | / | * |

+     * |-----------------------------------------------------------| |---------------|

+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | | 7 | 8 | 9 | + |

+     * |-----------------------------------------------------'     | |---------------|

+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  | | 4 | 5 | 6 | - |

+     * |-----------------------------------------------------------| |---------------|

+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|   /   |Shift | | 1 | 2 | 3 | E |

+     * |-----------------------------------------------------------| |-----------| N |

+     * |CAPS|Alt |Gui  |`  |SPC               |BSLS  |LFT|RGT|DN|UP| |   0   | . | T |

+     * `-----------------------------------------------------------' |---------------'

+     */

+    KEYMAP(							KB_PWR,

+		   KB_ESC, KB_1,   KB_2,   KB_3,   KB_4,   KB_5,   KB_6,   KB_7,   KB_8,   KB_9,   KB_0,    KB_MINS,KB_EQL, KB_BSPC,	KB_FN1, KB_PEQL, KB_PSLS,  KB_PAST, \

+           KB_TAB, KB_Q,   KB_W,   KB_E,   KB_R,   KB_T,   KB_Y,   KB_U,   KB_I,   KB_O,   KB_P,    KB_LBRC,KB_RBRC,			KB_P7,   KB_P8,   KB_P9,   KB_PPLS, \

+           KB_LCTL,KB_A,   KB_S,   KB_D,   KB_F,   KB_G,   KB_H,   KB_J,   KB_K,   KB_L,   KB_SCLN, KB_QUOT,KB_ENT,				KB_P4,   KB_P5,   KB_P6,   KB_PMNS, \

+           KB_LSFT,KB_Z,   KB_X,   KB_C,   KB_V,   KB_B,   KB_N,   KB_M,   KB_COMM,KB_DOT, KB_SLSH,								KB_P1,   KB_P2,   KB_P3, \

+           KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP,										KB_P0,   KB_PDOT, KB_PENT),

+

+

+    /* Layer 1: Tenkey use Layer

+     * ,-----------------------------------------------------------. ,---------------,

+     * |                    POWER                                  | |               |  

+     * |-----------------------------------------------------------| |---------------|

+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |NLK| = | / | * |

+     * |-----------------------------------------------------------| |---------------|

+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | |INS| 8 |PGU|V+ |

+     * |-----------------------------------------------------'     | |---------------|

+     * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  | |DEL|UP |PGD|V- |

+     * |-----------------------------------------------------------| |---------------|

+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|   /   |Shift | |LFT|DN |RGT| E |

+     * |-----------------------------------------------------------| |-----------| N |

+     * |CAPS|Alt |Gui  |`  |SPC               |BSLS  |LFT|RGT|DN|UP| |   0   | . | T |

+     * `-----------------------------------------------------------' `---------------'

+     */

+    KEYMAP(						KB_PWR, \

+		   KB_ESC, KB_1,   KB_2,   KB_3,   KB_4,   KB_5,   KB_6,   KB_7,   KB_8,   KB_9,   KB_0,    KB_MINS,KB_EQL, KB_BSPC, KB_FN1,   KB_PEQL, KB_PSLS, KB_MUTE, \

+           KB_TAB, KB_Q,   KB_W,   KB_E,   KB_R,   KB_T,   KB_Y,   KB_U,   KB_I,   KB_O,   KB_P,    KB_LBRC,KB_RBRC,         KB_INS,   KB_P8,   KB_PGUP,   KB_VOLU, \

+           KB_LCTL,KB_A,   KB_S,   KB_D,   KB_F,   KB_G,   KB_H,   KB_J,   KB_K,   KB_L,   KB_SCLN, KB_QUOT,KB_ENT,          KB_DEL,   KB_UP,   KB_PGDN,   KB_VOLD, \

+           KB_LSFT,KB_Z,   KB_X,   KB_C,   KB_V,   KB_B,   KB_N,   KB_M,   KB_COMM,KB_DOT, KB_SLSH, 						 KB_LEFT,  KB_DOWN,   KB_RIGHT, \

+           KB_CAPS,KB_LALT,KB_LGUI,KB_GRV, KB_SPC, KB_BSLS,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP,                                    KB_P0,    KB_PDOT, KB_PENT),

+};

+

+

+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)

+{

+    return KEYCODE(layer, row, col);

+}

+

+uint8_t keymap_fn_layer(uint8_t fn_bits)

+{

+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);

+}

+

+uint8_t keymap_fn_keycode(uint8_t fn_bits)

+{

+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);

+}

diff --git a/keyboard/IIgs_Standard/led.c b/keyboard/IIgs_Standard/led.c
new file mode 100644
index 0000000000..f76545f0ba
--- /dev/null
+++ b/keyboard/IIgs_Standard/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/keyboard/IIgs_Standard/matrix.c b/keyboard/IIgs_Standard/matrix.c
new file mode 100644
index 0000000000..6ca55b7ea2
--- /dev/null
+++ b/keyboard/IIgs_Standard/matrix.c
@@ -0,0 +1,363 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "led.h"
+
+
+#if (MATRIX_COLS > 16)
+#   error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+#   error "MATRIX_ROWS must not exceed 255"
+#endif
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t *matrix_prev;
+static uint8_t _matrix0[MATRIX_ROWS];
+static uint8_t _matrix1[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t *matrix_prev;
+static uint16_t _matrix0[MATRIX_ROWS];
+static uint16_t _matrix1[MATRIX_ROWS];
+#endif
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static uint8_t read_col(uint8_t row);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    // Input with pull-up(DDR:0, PORT:1)
+	// Column C1 ~ C7 (PortC0-6)
+	// Column C0(Port E1)
+    DDRC &= ~0b01111111;
+    PORTC |= 0b01111111;
+    DDRE &= ~0b00000010;
+    PORTE |= 0b00000010;
+	//DDRB &= ~0b00000100;
+	//PORTB |= 0b00000100;
+	// modifier	B3/4,F4/5,E4	always input
+	// 			A0
+    //DDRA |=  0b00000001;
+    //PORTA &= 0b00000001;
+    //DDRB |=  0b00011000;
+    //PORTB &= 0b00011000;
+    //DDRF |= ~0b00110000;
+    //PORTF &= 0b00110000;
+    //DDRB &= ~0b00011000;
+    //PORTB |= 0b00011000;
+    //DDRF &= ~0b00110000;
+    //PORTF |= 0b00110000;
+    //DDRE &= ~0b00010000;
+    //PORTE |= 0b00010000;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
+    matrix = _matrix0;
+    matrix_prev = _matrix1;
+}
+
+uint8_t matrix_scan(void)
+{
+    if (!debouncing) {
+        uint8_t *tmp = matrix_prev;
+        matrix_prev = matrix;
+        matrix = tmp;
+    }
+
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        unselect_rows();
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+		if ( i == ( MATRIX_ROWS - 1 ) ) {							// CHECK CAPS LOCK
+       		if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {		// CAPS LOCK is ON on HOST
+				if ( ~read_col(i) & (1<< 4) ) { 							// CAPS LOCK is still DOWN ( 0bXXX1_XXXX)	
+					matrix[i]        = ~read_col(i) & 0b11101111;				// change CAPS LOCK as released
+				} else {													// CAPS LOCK in UP
+					matrix[i] = ~read_col(i) | 0b00010000;						// send fake caps lock down
+				}
+			} else {													// CAPS LOCK is OFF on HOST
+        		if (matrix[i] != (uint8_t)~read_col(i)) {
+           			matrix[i] = (uint8_t)~read_col(i);
+        			if (debouncing) {
+        				debug("bounce!: "); debug_hex(debouncing); print("\n");
+					}
+       				debouncing = DEBOUNCE;
+				}
+			}
+		} else {
+        	if (matrix[i] != (uint8_t)~read_col(i)) {
+           		matrix[i] = (uint8_t)~read_col(i);
+        		if (debouncing) {
+        			debug("bounce!: "); debug_hex(debouncing); print("\n");
+				}
+       			debouncing = DEBOUNCE;
+			}
+		}
+	}
+    unselect_rows();
+
+    if (debouncing) {
+        debouncing--;
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix[i] != matrix_prev[i]) {
+            return true;
+        }
+    }
+    return false;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+//	if ( row == ( MATRIX_ROWS - 1 ) && col == 4) {							// CHECK CAPS LOCK
+//    	if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {		// CAPS LOCK is ON on HOST
+//			if ((matrix_prev[row] & 0b00010000) && (~matrix[row] & 0b00010000)) {
+//				debug("CapsLock Reverse:");debug_hex(matrix[row]);
+//				matrix[row] |= 0b00010000;
+//				matrix_prev[row] &= ~0b00010000;
+//				debug("->");debug_hex(matrix[row]);debug("\n");
+//			}
+//		} 
+//	}
+   	return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+        pbin_reverse(matrix_get_row(row));
+#else
+        pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+        count += bitpop(matrix[i]);
+#else
+        count += bitpop16(matrix[i]);
+#endif
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+inline
+static uint8_t read_col(uint8_t row)
+{
+	// For normal 	: Column C1 ~ C7 (PortC0-6), C0(Port E1)
+	// For modifier	: B3(CNTRL)/4(SHIFT),F4(CMD/GUI)/5(OPTION,ALT)
+	// Modifier would be copied to report->mods except E4(CAPSLOCK)
+	uint8_t tmp;
+	if ( row == 10 ) {
+		tmp = 0xC0;
+		tmp |= (PINB >> 3 ) & 0b00000011;	// LEFT CTRL  is 0bit in modifier (HID Spec)
+											// LEFT SHIFT is 1bit in modifier (HID Spec)
+		tmp |= (PINF >> 3 ) & 0b00000100;	// LEFT ALT   is 2bit in modifier (HID Spec)
+		tmp |= (PINF >> 1 ) & 0b00001000;	// LEFT GUI   is 3bit in modifier (HID Spec)
+		tmp |= (PINA << 4 ) & 0b00010000;	// CAPSLOCK
+		tmp |= (PINB << 3 ) & 0b00100000;	// POWER 	 
+	} else {
+		tmp = 0x00;
+		tmp = (PINE >> 1)&0b00000001; 
+		tmp |= PINC << 1 ;
+	}
+	return tmp;
+}
+
+inline
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+	// DDR : 1, output	0, input
+    DDRB  &= ~0b00000011; // PB: 1,0  
+    PORTB &= ~0b00000011;
+    DDRD  &= ~0b00010000; // PD: 4
+    PORTD &= ~0b00010000;
+    DDRE  &= ~0b11000000; // PE: 7,6
+    PORTE &= ~0b11000000;
+    DDRF  &= ~0b11000111; // PF: 7,6,2,1,0 
+    PORTF &= ~0b11000111;
+	// to unselect virtual row(modifier), set port to output with low
+    DDRA  |=  0b00000001; // PA: 0 for CAPSLOCK
+    PORTA &= ~0b00000001;
+    DDRB  |=  0b00011100; // PB: 3,4 for modifier(row10)
+    PORTB &= ~0b00011100; // PB: 2 for power
+    DDRF  |=  0b00110000; // PF: 4,5 for modifier
+    PORTF &= ~0b00110000;
+}
+
+inline
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+	// with row enable, column could send low to AVR when pressed
+    // row: 0    1    2    3    4    5    6    7    8    9
+    // pin: PB1, PB0, PE7, PE6, PD4, PF2, PF0, PF1, PF6  PF7
+    switch (row) {
+        case 0:
+            DDRB  |= (1<<1);
+            PORTB &= ~(1<<1);
+            break;
+        case 1:
+            DDRB  |= (1<<0);
+            PORTB &= ~(1<<0);
+            break;
+        case 2:
+            DDRE  |= (1<<7);
+            PORTE &= ~(1<<7);
+            break;
+        case 3:
+            DDRE  |= (1<<6);
+            PORTE &= ~(1<<6);
+            break;
+        case 4:
+            DDRD  |= (1<<4);
+            PORTD &= ~(1<<4);
+            break;
+        case 5:
+            DDRF  |= (1<<2);
+            PORTF &= ~(1<<2);
+            break;
+        case 6:
+            DDRF  |= (1<<0);
+            PORTF &= ~(1<<0);
+            break;
+        case 7:
+            DDRF  |= (1<<1);
+            PORTF &= ~(1<<1);
+            break;
+        case 8:
+            DDRF  |= (1<<6);
+            PORTF &= ~(1<<6);
+            break;
+        case 9:
+            DDRF  |= (1<<7);
+            PORTF &= ~(1<<7);
+            break;
+		case 10:
+			// modifier has no row enable
+			// to select virtual row, set port as input
+		    DDRA &= ~0b00000001;
+		    PORTA |= 0b00000001;
+		    DDRB &= ~0b00011100;
+		    PORTB |= 0b00011100;
+		    DDRF &= ~0b00110000;
+		    PORTF |= 0b00110000;
+            break;
+
+    }
+}