Keyboard: add mint60 keyboard (#3543)

* add mint60

* change source by reviews

20 files changed, 1675 insertions, 0 deletions

diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h
new file mode 100644
index 0000000000..37b69e93a1
--- /dev/null
+++ b/keyboards/mint60/config.h
@@ -0,0 +1,235 @@
+/*
+Copyright 2018 Eucalyn
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+#include <serial_config.h>
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Eucalyn
+#define PRODUCT         Mint60
+#define DESCRIPTION     A row staggered split keyboard
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { D4, B3, B1, F7, B2, B6, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#define RGBLIGHT_ANIMATIONS
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
diff --git a/keyboards/mint60/i2c.c b/keyboards/mint60/i2c.c
new file mode 100644
index 0000000000..4bee5c6398
--- /dev/null
+++ b/keyboards/mint60/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/mint60/i2c.h b/keyboards/mint60/i2c.h
new file mode 100644
index 0000000000..47cf6bd1b2
--- /dev/null
+++ b/keyboards/mint60/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency 400kHz
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/keyboards/mint60/info.json b/keyboards/mint60/info.json
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/mint60/info.json
diff --git a/keyboards/mint60/keymaps/default/config.h b/keyboards/mint60/keymaps/default/config.h
new file mode 100644
index 0000000000..0195c61dff
--- /dev/null
+++ b/keyboards/mint60/keymaps/default/config.h
@@ -0,0 +1,23 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+#define USE_SERIAL
+// #define USE_I2C
+
+// #define MASTER_RIGHT
diff --git a/keyboards/mint60/keymaps/default/keymap.c b/keyboards/mint60/keymaps/default/keymap.c
new file mode 100644
index 0000000000..42c61ffaad
--- /dev/null
+++ b/keyboards/mint60/keymaps/default/keymap.c
@@ -0,0 +1,104 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum custom_keycodes {
+  RGBRST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,    KC_BSPC,  \
+    KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
+    KC_CAPS,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,        KC_ENT,   \
+    KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,   KC_UP,  MO(1),   \
+    KC_ESC,    KC_LCTL,    KC_LGUI,    KC_LALT,    KC_SPC,        KC_BSPC, KC_ENT,  LALT(KC_GRV),               KC_LEFT,KC_DOWN,KC_RGHT \
+  ),
+  [1] = LAYOUT( \
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_DEL, \
+    RGB_TOG,   RGBRST,  RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX,     RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,        XXXXXXX, \
+    _______,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_PGUP, _______, \
+    XXXXXXX,   _______,    _______,    _______,    XXXXXXX,       XXXXXXX, XXXXXXX, XXXXXXX,                   KC_HOME, KC_PGDN, KC_END \
+  )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+// define variables for reactive RGB
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/mint60/keymaps/default/readme.md b/keyboards/mint60/keymaps/default/readme.md
new file mode 100644
index 0000000000..37dec75a66
--- /dev/null
+++ b/keyboards/mint60/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Mint60
diff --git a/keyboards/mint60/keymaps/eucalyn/config.h b/keyboards/mint60/keymaps/eucalyn/config.h
new file mode 100644
index 0000000000..0195c61dff
--- /dev/null
+++ b/keyboards/mint60/keymaps/eucalyn/config.h
@@ -0,0 +1,23 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Use I2C or Serial, not both */
+#define USE_SERIAL
+// #define USE_I2C
+
+// #define MASTER_RIGHT
diff --git a/keyboards/mint60/keymaps/eucalyn/keymap.c b/keyboards/mint60/keymaps/eucalyn/keymap.c
new file mode 100644
index 0000000000..09b30730ad
--- /dev/null
+++ b/keyboards/mint60/keymaps/eucalyn/keymap.c
@@ -0,0 +1,104 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum custom_keycodes {
+  RGBRST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,    KC_BSPC,  \
+    KC_TAB,    KC_Q,    KC_W,    KC_COMM, KC_DOT,  KC_SCLN,   KC_M,    KC_R,    KC_D,    KC_Y,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,  \
+    KC_CAPS,     KC_A,    KC_O,    KC_E,    KC_I,    KC_U,      KC_G,    KC_T,    KC_K,    KC_S,    KC_N,    KC_QUOT,        KC_ENT,   \
+    KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_F,      KC_B,    KC_H,    KC_J,    KC_L,    KC_SLSH, KC_RSFT,   KC_UP,  MO(1),   \
+    KC_ESC,    KC_LCTL,    KC_LGUI,    KC_LALT,    KC_SPC,        KC_BSPC, KC_ENT,  LALT(KC_GRV),               KC_LEFT,KC_DOWN,KC_RGHT \
+  ),
+  [1] = LAYOUT( \
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_DEL, \
+    RGB_TOG,   RGBRST,  RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX,     RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,        XXXXXXX, \
+    _______,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_PGUP, _______, \
+    XXXXXXX,   _______,    _______,    _______,    XXXXXXX,       XXXXXXX, XXXXXXX, XXXXXXX,                   KC_HOME, KC_PGDN, KC_END \
+  )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+// define variables for reactive RGB
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/mint60/keymaps/eucalyn/readme.md b/keyboards/mint60/keymaps/eucalyn/readme.md
new file mode 100644
index 0000000000..1478b951fe
--- /dev/null
+++ b/keyboards/mint60/keymaps/eucalyn/readme.md
@@ -0,0 +1,3 @@
+# The Eucalyn keymap for Mint60
+
+It use "Eucalyn" Kemboard Layout.
diff --git a/keyboards/mint60/matrix.c b/keyboards/mint60/matrix.c
new file mode 100644
index 0000000000..6d8878332a
--- /dev/null
+++ b/keyboards/mint60/matrix.c
@@ -0,0 +1,349 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+uint8_t is_master = 0 ;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+static uint8_t matrix_master_scan(void);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    is_master = has_usb();
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matirx so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+    int ret=serial_update_buffers();
+    if (ret ) {
+        if(ret==2)RXLED1;
+        return 1;
+    }
+RXLED0;
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    if (is_master) {
+        matrix_master_scan();
+    }else{
+        matrix_slave_scan();
+
+//        if(serial_slave_DATA_CORRUPT()){
+//          TXLED0;
+          int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
+
+          for (int i = 0; i < ROWS_PER_HAND; ++i) {
+              matrix[offset+i] = serial_master_buffer[i];
+          }
+
+//        }else{
+//          TXLED1;
+//        }
+
+        matrix_scan_quantum();
+    }
+    return 1;
+}
+
+
+uint8_t matrix_master_scan(void) {
+
+    int ret = _matrix_scan();
+
+#ifndef KEYBOARD_helix_rev1
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+//    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+//        i2c_slave_buffer[i] = matrix[offset+i];
+//    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_master_buffer[i] = matrix[offset+i];
+    }
+#endif
+#endif
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}
diff --git a/keyboards/mint60/mint60.c b/keyboards/mint60/mint60.c
new file mode 100644
index 0000000000..724bea757a
--- /dev/null
+++ b/keyboards/mint60/mint60.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "mint60.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/mint60/mint60.h b/keyboards/mint60/mint60.h
new file mode 100644
index 0000000000..ed2ee255f4
--- /dev/null
+++ b/keyboards/mint60/mint60.h
@@ -0,0 +1,59 @@
+/* Copyright 2018 Eucalyn
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MINT60_H
+#define MINT60_H
+
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+//rgb led driver
+#include "ws2812.h"
+#endif
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+  #include <avr/io.h>
+  #include <avr/interrupt.h>
+#endif
+#endif
+
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+  L00,L01,L02,L03,L04,L05,    R00,R01,R02,R03,R04,R05,R06,  R07, \
+  L10,  L11,L12,L13,L14,L15,    R10,R11,R12,R13,R14,R15,R16,R17, \
+  L20,   L21,L22,L23,L24,L25,    R20,R21,R22,R23,R24,R25,   R27, \
+  L30,    L31,L32,L33,L34,L35,    R30,R31,R32,R33,R34,R35,R36,R37, \
+  L40,L41, L42, L43,    L44,      R40, R41, R43,      R45,R46,R47 \
+) \
+{ \
+  { L00, L01, L02, L03, L04, L05, KC_NO, KC_NO }, \
+  { L10, L11, L12, L13, L14, L15, KC_NO, KC_NO }, \
+  { L20, L21, L22, L23, L24, L25, KC_NO, KC_NO }, \
+  { L30, L31, L32, L33, L34, L35, KC_NO, KC_NO }, \
+  { L40, L41, L42, L43, L44, KC_NO, KC_NO, KC_NO }, \
+  { R00, R01, R02, R03, R04, R05, R06, R07 }, \
+  { R10, R11, R12, R13, R14, R15, R16, R17 }, \
+  { R20, R21, R22, R23, R24, R25, KC_NO, R27 }, \
+  { R30, R31, R32, R33, R34, R35, R36, R37 }, \
+  { R40, R41, KC_NO, R43, KC_NO, R45, R46, R47 }, \
+}
+
+#endif
diff --git a/keyboards/mint60/readme.md b/keyboards/mint60/readme.md
new file mode 100644
index 0000000000..c425b213ba
--- /dev/null
+++ b/keyboards/mint60/readme.md
@@ -0,0 +1,15 @@
+# Mint60
+
+![Mint60](https://imgur.com/a/8xnTS4U)
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [Eucalyn](https://github.com/eucalyn)  [@eucalyn_](https://twitter.com/eucalyn_)
+Hardware Supported: The Mint60 PCBs, ProMicro supported  
+Hardware Availability: links to where you can find this hardware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mint60:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/mint60/rules.mk b/keyboards/mint60/rules.mk
new file mode 100644
index 0000000000..b4d4bddd33
--- /dev/null
+++ b/keyboards/mint60/rules.mk
@@ -0,0 +1,78 @@
+SRC += i2c.c \
+	   serial.c \
+		 matrix.c \
+ 	   split_util.c \
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+CUSTOM_MATRIX = yes
+USE_I2C = yes
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
diff --git a/keyboards/mint60/serial.c b/keyboards/mint60/serial.c
new file mode 100644
index 0000000000..5919415877
--- /dev/null
+++ b/keyboards/mint60/serial.c
@@ -0,0 +1,295 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
+
+// Serial pulse period in microseconds.
+#define SELECT_SERIAL_SPEED 1
+#if SELECT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #define READ_WRITE_START_ADJUST 23 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 50            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#else
+#error Illegal Serial Speed
+#endif
+
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH 1
+#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
+}
+
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input_with_pullup(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input_with_pullup();
+
+#if SERIAL_PIN_MASK == _BV(PD0)
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#elif SERIAL_PIN_MASK == _BV(PD2)
+  // Enable INT2
+  EIMSK |= _BV(INT2);
+  // Trigger on falling edge of INT2
+  EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+#else
+ #error unknown SERIAL_PIN_MASK value
+#endif
+}
+
+// Used by the sender to synchronize timing with the reciver.
+static
+void sync_recv(void) {
+  for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  }
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+}
+
+// Used by the reciver to send a synchronization signal to the sender.
+static
+void sync_send(void) {
+  serial_low();
+  serial_delay();
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  _delay_sub_us(READ_WRITE_START_ADJUST);
+  for ( uint8_t i = 0; i < 8; ++i) {
+    serial_delay_half1();   // read the middle of pulses
+    byte = (byte << 1) | serial_read_pin();
+    _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+    serial_delay_half2();
+  }
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 1<<7;
+  while( b ) {
+    if(data & b) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    b >>= 1;
+    serial_delay();
+  }
+  serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  serial_output();
+
+  // slave send phase
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    sync_send();
+    serial_write_byte(serial_slave_buffer[i]);
+    checksum += serial_slave_buffer[i];
+  }
+  sync_send();
+  serial_write_byte(checksum);
+
+  // slave switch to input
+  sync_send(); //0
+  serial_delay_half1(); //1
+  serial_low();         //2
+  serial_input_with_pullup(); //2
+  serial_delay_half1(); //3
+
+  // slave recive phase
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    sync_recv();
+    serial_master_buffer[i] = serial_read_byte();
+    checksum_computed += serial_master_buffer[i];
+  }
+  sync_recv();
+  uint8_t checksum_received = serial_read_byte();
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+
+  sync_recv(); //weit master output to high
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(SLAVE_INT_WIDTH);
+
+  // wait for the slaves response
+  serial_input_with_pullup();
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    serial_output();
+    serial_high();
+    sei();
+    return 1;
+  }
+
+  // master recive phase
+  // if the slave is present syncronize with it
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    sync_recv();
+    serial_slave_buffer[i] = serial_read_byte();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  sync_recv();
+  uint8_t checksum_received = serial_read_byte();
+
+  if (checksum_computed != checksum_received) {
+    serial_output();
+    serial_high();
+    sei();
+    return 2;
+  }
+
+  // master switch to output
+  sync_recv(); //0
+  serial_delay();  //1
+  serial_low();    //3
+  serial_output(); // 3
+  serial_delay_half1(); //4
+
+  // master send phase
+  uint8_t checksum = 0;
+
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    sync_send();
+    serial_write_byte(serial_master_buffer[i]);
+    checksum += serial_master_buffer[i];
+  }
+  sync_send();
+  serial_write_byte(checksum);
+
+  // always, release the line when not in use
+  sync_send();
+
+  sei();
+  return 0;
+}
+
+#endif
diff --git a/keyboards/mint60/serial.h b/keyboards/mint60/serial.h
new file mode 100644
index 0000000000..c3c9569b2c
--- /dev/null
+++ b/keyboards/mint60/serial.h
@@ -0,0 +1,27 @@
+#ifndef SOFT_SERIAL_H
+#define SOFT_SERIAL_H
+
+#include <stdbool.h>
+
+// ////////////////////////////////////////////
+// Need Soft Serial defines in serial_config.h
+// ////////////////////////////////////////////
+// ex.
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif /* SOFT_SERIAL_H */
diff --git a/keyboards/mint60/serial_config.h b/keyboards/mint60/serial_config.h
new file mode 100644
index 0000000000..82c6e4e836
--- /dev/null
+++ b/keyboards/mint60/serial_config.h
@@ -0,0 +1,16 @@
+#ifndef SOFT_SERIAL_CONFIG_H
+#define SOFT_SERIAL_CONFIG_H
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+//// #error rev2 serial config
+
+#endif /* SOFT_SERIAL_CONFIG_H */
diff --git a/keyboards/mint60/split_util.c b/keyboards/mint60/split_util.c
new file mode 100644
index 0000000000..cd3a1896e5
--- /dev/null
+++ b/keyboards/mint60/split_util.c
@@ -0,0 +1,70 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+
+#ifdef USE_I2C
+    i2c_master_init();
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+}
diff --git a/keyboards/mint60/split_util.h b/keyboards/mint60/split_util.h
new file mode 100644
index 0000000000..687ca19bd3
--- /dev/null
+++ b/keyboards/mint60/split_util.h
@@ -0,0 +1,19 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+
+void matrix_master_OLED_init (void);
+
+#endif