add mouse function.

14 files changed, 275 insertions, 117 deletions

diff --git a/.gitignore b/.gitignore
index 293c452390..c25d41d238 100644
--- a/.gitignore
+++ b/.gitignore
@@ -7,3 +7,4 @@
 *.lst
 *.map
 *.sym
+tags
diff --git a/Makefile b/Makefile
index c9c668d415..1fe3ffa2b1 100644
--- a/Makefile
+++ b/Makefile
@@ -46,13 +46,14 @@ TARGET = mykey
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC =	$(TARGET).c \
-	keymap.c \
-	matrix.c \
-	usb_device.c \
+	usb.c \
 	usb_keyboard.c \
+	usb_mouse.c \
 	usb_debug.c \
-	print.c \
-	jump_bootloader.c
+	keymap.c \
+	matrix.c \
+	jump_bootloader.c \
+	print.c
 
 
 # MCU name, you MUST set this to match the board you are using
diff --git a/keymap.h b/keymap.h
index ac0cc5fea6..6b95fb61f6 100644
--- a/keymap.h
+++ b/keymap.h
@@ -2,7 +2,7 @@
 #define KEYMAP_H 1
 
 #include <stdint.h>
-#include "usbkeycodes.h"
+#include "usb_keycodes.h"
 
 int get_layer(void);
 uint8_t get_keycode(int layer, int row, int col);
diff --git a/matrix.h b/matrix.h
index d5290916b5..74b5f894b1 100644
--- a/matrix.h
+++ b/matrix.h
@@ -1,3 +1,6 @@
+#ifndef MATRIX_H
+#define  MATRIX_H 1
+
 #include <stdbool.h>
 
 extern uint8_t *matrix;
@@ -8,3 +11,5 @@ uint8_t matrix_scan(void);
 bool matrix_is_modified(void);
 bool matrix_has_ghost(void);
 bool matrix_has_ghost_in_row(uint8_t row);
+
+#endif
diff --git a/mykey.c b/mykey.c
index 94cbbfb5a1..a295b8c57d 100644
--- a/mykey.c
+++ b/mykey.c
@@ -30,7 +30,9 @@
 #include <avr/interrupt.h>
 #include <util/delay.h>
 
-#include "usb_device.h"
+#include "usb.h"
+#include "usb_keyboard.h"
+#include "usb_mouse.h"
 #include "print.h"
 #include "matrix.h"
 #include "keymap.h"
@@ -50,16 +52,9 @@ uint16_t idle_count=0;
 
 int main(void)
 {
-    bool modified = false;
-    bool has_ghost = false;
-    uint8_t key_index = 0;
-
     // set for 16 MHz clock
     CPU_PRESCALE(0);
 
-    matrix_init();
-
-
     // Initialize the USB, and then wait for the host to set configuration.
     // If the Teensy is powered without a PC connected to the USB port,
     // this will wait forever.
@@ -78,99 +73,85 @@ int main(void)
     TCCR0B = 0x05;
     TIMSK0 = (1<<TOIE0);
 
+
+    matrix_init();
     print("firmware 0.2 for t.m.k.\n");
 
+    bool modified = false;
+    bool has_ghost = false;
+    int key_index = 0;
     int loop_count = 0;
+    int layer = 0;
     while (1) {
-        int layer = 0;
-
         matrix_scan();
         layer = get_layer();
-
         modified = matrix_is_modified();
         has_ghost = matrix_has_ghost();
 
-        // doesnt send keys during ghost occurs
-        if (modified && !has_ghost) {
-            key_index = 0;
-            keyboard_modifier_keys = 0;
-            for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
+        // print matrix state for debug
+        if (modified) {
+            print_matrix();
 
-            for (int row = 0; row < MATRIX_ROWS; row++) {
-                for (int col = 0; col < MATRIX_COLS; col++) {
-                    if (matrix[row] & 1<<col) continue;
-
-                    uint8_t code = get_keycode(layer, row, col);
-                    if (code == KB_NO) {
-                        continue;
-                    } else if (KB_LCTRL <= code && code <= KB_RGUI) {
-                        // modifier keycode: 0xE0-0xE7
-                        keyboard_modifier_keys |= 1<<(code & 0x07);
-                    } else {
-                        if (key_index < 6)
-                            keyboard_keys[key_index] = code;
-                        key_index++;
-                    }
+            // LED flush
+            DDRD |= 1<<PD6;
+            PORTD |= 1<<PD6;
+        }
+
+        // set matrix state to keyboard_keys, keyboard_modifier_keys
+        key_index = 0;
+        keyboard_modifier_keys = 0;
+        for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            for (int col = 0; col < MATRIX_COLS; col++) {
+                if (matrix[row] & 1<<col) continue;
+
+                uint8_t code = get_keycode(layer, row, col);
+                if (code == KB_NO) {
+                    continue;
+                } else if (KB_LCTRL <= code && code <= KB_RGUI) {
+                    // modifier keycode: 0xE0-0xE7
+                    keyboard_modifier_keys |= 1<<(code & 0x07);
+                } else {
+                    if (key_index < 6)
+                        keyboard_keys[key_index] = code;
+                    key_index++;
                 }
             }
+        }
 
-            // run bootloader when 4 left modifier keys down
+        if (!has_ghost)  {
+            // when 4 left modifier keys down
             if (keyboard_modifier_keys == (MOD_LCTRL | MOD_LSHIFT | MOD_LALT | MOD_LGUI)) {
                 // cancel all keys
                 keyboard_modifier_keys = 0;
                 for (int i = 0; i < 6; i++) keyboard_keys[i] = KB_NO;
                 usb_keyboard_send();
 
+                /*
                 print("jump to bootloader...\n");
                 _delay_ms(1000);
                 jump_bootloader();
-            }
+                */
 
-            if (key_index > 6) {
-                //Rollover
-            }
+                // mouse
+                print("usb_mouse_move\n");
+                usb_mouse_move(10, 0, 0);
 
-            usb_keyboard_send();
-
-
-            // variables shared with interrupt routines must be
-            // accessed carefully so the interrupt routine doesn't
-            // try to use the variable in the middle of our access
-            cli();
-            //idle_count = 0;
-            sei();
-        }
-
-        // print matrix state for debug
-        if (modified) {
-            print_matrix();
-
-            // LED flush
-            DDRD |= 1<<PD6;
-            PORTD |= 1<<PD6;
-        }
+                _delay_ms(100);
+                continue;
+            }
 
-/*
-        // print counts for debug
-        if ((loop_count % 0x1000) == 0) {
-            //print(".");
-            print("idle_count: "); phex((idle_count & 0xFF00) >> 8); phex(idle_count & 0xFF); print("\n");
-            print("loop_count: "); phex((loop_count & 0xFF00) >> 8); phex(loop_count & 0xFF); print("\n");
-            print_matrix();
-        }
 
-        // teensy LED flush for debug
-        if ((loop_count & 0x100) == 0) {
-            DDRD |= 1<<PD6;
-            PORTD |= 1<<PD6;
+            // send keys to host
+            if (modified) {
+                if (key_index > 6) {
+                    //Rollover
+                }
+                usb_keyboard_send();
+            }
         }
-*/
-
-        // now the current pins will be the previous, and
-        // wait a short delay so we're not highly sensitive
-        // to mechanical "bounce".
-        _delay_ms(2);
         loop_count++;
+        _delay_ms(2);
     }
 }
 
diff --git a/print.c b/print.c
index 8e46decac4..5395fa3480 100644
--- a/print.c
+++ b/print.c
@@ -25,7 +25,6 @@
 
 #include <avr/io.h>
 #include <avr/pgmspace.h>
-
 #include "print.h"
 
 void print_P(const char *s)
diff --git a/print.h b/print.h
index 9a42462754..d61e5de3e0 100644
--- a/print.h
+++ b/print.h
@@ -1,5 +1,5 @@
-#ifndef print_h__
-#define print_h__
+#ifndef PRINT_H__
+#define PRINT_H__ 1
 
 #include <avr/pgmspace.h>
 #include "usb_debug.h"
diff --git a/usb_device.c b/usb.c
index 1d790f043c..c910a977ed 100644
--- a/usb_device.c
+++ b/usb.c
@@ -21,10 +21,12 @@
  * THE SOFTWARE.
  */
 
+#include <avr/io.h>
 #include <avr/pgmspace.h>
 #include <avr/interrupt.h>
-#include "usb_device.h"
+#include "usb.h"
 #include "usb_keyboard.h"
+#include "usb_mouse.h"
 #include "usb_debug.h"
 
 
@@ -64,11 +66,15 @@
 
 #define ENDPOINT0_SIZE		32
 
+// 0:control endpoint is enabled automatically by controller.
 static const uint8_t PROGMEM endpoint_config_table[] = {
-	0,
-	0,
-	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER,
-	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER
+	// enable, UECFG0X(type, direction), UECFG1X(size, bank, allocation)
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER, // 1
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(MOUSE_SIZE)    | MOUSE_BUFFER,    // 2
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER, // 3
+        0, // 4
+        0, // 5
+        0, // 6
 };
 
 
@@ -138,6 +144,36 @@ static uint8_t PROGMEM keyboard_hid_report_desc[] = {
         0xc0                 // End Collection
 };
 
+// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
+static uint8_t PROGMEM mouse_hid_report_desc[] = {
+	0x05, 0x01,			// Usage Page (Generic Desktop)
+	0x09, 0x02,			// Usage (Mouse)
+	0xA1, 0x01,			// Collection (Application)
+	0x05, 0x09,			//   Usage Page (Button)
+	0x19, 0x01,			//   Usage Minimum (Button #1)
+	0x29, 0x03,			//   Usage Maximum (Button #3)
+	0x15, 0x00,			//   Logical Minimum (0)
+	0x25, 0x01,			//   Logical Maximum (1)
+	0x95, 0x03,			//   Report Count (3)
+	0x75, 0x01,			//   Report Size (1)
+	0x81, 0x02,			//   Input (Data, Variable, Absolute)
+	0x95, 0x01,			//   Report Count (1)
+	0x75, 0x05,			//   Report Size (5)
+	0x81, 0x03,			//   Input (Constant)
+	0x05, 0x01,			//   Usage Page (Generic Desktop)
+	0x09, 0x30,			//   Usage (X)
+	0x09, 0x31,			//   Usage (Y)
+	0x15, 0x81,			//   Logical Minimum (-127)
+	0x25, 0x7F,			//   Logical Maximum (127)
+	0x75, 0x08,			//   Report Size (8),
+	0x95, 0x02,			//   Report Count (2),
+	0x81, 0x06,			//   Input (Data, Variable, Relative)
+	0x09, 0x38,			//   Usage (Wheel)
+	0x95, 0x01,			//   Report Count (1),
+	0x81, 0x06,			//   Input (Data, Variable, Relative)
+	0xC0				// End Collection
+};
+
 static uint8_t PROGMEM debug_hid_report_desc[] = {
 	0x06, 0x31, 0xFF,			// Usage Page 0xFF31 (vendor defined)
 	0x09, 0x74,				// Usage 0x74
@@ -151,20 +187,22 @@ static uint8_t PROGMEM debug_hid_report_desc[] = {
 	0xC0					// end collection
 };
 
-#define CONFIG1_DESC_SIZE        (9+9+9+7+9+9+7)
+#define CONFIG1_DESC_SIZE        (9+(9+9+7)+(9+9+7)+(9+9+7))
 #define KEYBOARD_HID_DESC_OFFSET (9+9)
-#define DEBUG_HID_DESC_OFFSET    (9+9+9+7+9)
+#define MOUSE_HID_DESC_OFFSET    (9+(9+9+7)+9)
+#define DEBUG_HID_DESC_OFFSET    (9+(9+9+7)+(9+9+7)+9)
 static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
 	// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
 	9, 					// bLength;
 	2,					// bDescriptorType;
 	LSB(CONFIG1_DESC_SIZE),			// wTotalLength
 	MSB(CONFIG1_DESC_SIZE),
-	2,					// bNumInterfaces
+	3,					// bNumInterfaces
 	1,					// bConfigurationValue
 	0,					// iConfiguration
 	0xC0,					// bmAttributes
 	50,					// bMaxPower
+
 	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
 	9,					// bLength
 	4,					// bDescriptorType
@@ -175,7 +213,7 @@ static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
 	0x01,					// bInterfaceSubClass (0x01 = Boot)
 	0x01,					// bInterfaceProtocol (0x01 = Keyboard)
 	0,					// iInterface
-	// HID interface descriptor, HID 1.11 spec, section 6.2.1
+	// HID descriptor, HID 1.11 spec, section 6.2.1
 	9,					// bLength
 	0x21,					// bDescriptorType
 	0x11, 0x01,				// bcdHID
@@ -191,6 +229,34 @@ static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
 	0x03,					// bmAttributes (0x03=intr)
 	KEYBOARD_SIZE, 0,			// wMaxPacketSize
 	1,					// bInterval
+
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	MOUSE_INTERFACE,			// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+	0x01,					// bInterfaceSubClass (0x01 = Boot)
+	0x02,					// bInterfaceProtocol (0x02 = Mouse)
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(mouse_hid_report_desc),		// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	MOUSE_ENDPOINT | 0x80,			// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	4, 0,					// wMaxPacketSize
+	1,					// bInterval
+
 	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
 	9,					// bLength
 	4,					// bDescriptorType
@@ -201,7 +267,7 @@ static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
 	0x00,					// bInterfaceSubClass
 	0x00,					// bInterfaceProtocol
 	0,					// iInterface
-	// HID interface descriptor, HID 1.11 spec, section 6.2.1
+	// HID descriptor, HID 1.11 spec, section 6.2.1
 	9,					// bLength
 	0x21,					// bDescriptorType
 	0x11, 0x01,				// bcdHID
@@ -259,6 +325,9 @@ static struct descriptor_list_struct {
 	{0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
 	{0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9},
         // HID REPORT
+	{0x2200, MOUSE_INTERFACE, mouse_hid_report_desc, sizeof(mouse_hid_report_desc)},
+	{0x2100, MOUSE_INTERFACE, config1_descriptor+MOUSE_HID_DESC_OFFSET, 9},
+        // HID REPORT
 	{0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)},
 	{0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9},
         // STRING descriptor
@@ -470,7 +539,7 @@ ISR(USB_COM_vect)
 			usb_configuration = wValue;
 			usb_send_in();
 			cfg = endpoint_config_table;
-			for (i=1; i<5; i++) {
+			for (i=1; i<=6; i++) {
 				UENUM = i;
 				en = pgm_read_byte(cfg++);
 				UECONX = en;
@@ -479,7 +548,7 @@ ISR(USB_COM_vect)
 					UECFG1X = pgm_read_byte(cfg++);
 				}
 			}
-        		UERST = 0x1E;
+        		UERST = 0x7E;
         		UERST = 0;
 			return;
 		}
@@ -571,6 +640,32 @@ ISR(USB_COM_vect)
 				}
 			}
 		}
+		if (wIndex == MOUSE_INTERFACE) {
+			if (bmRequestType == 0xA1) {
+				if (bRequest == HID_GET_REPORT) {
+					usb_wait_in_ready();
+					UEDATX = mouse_buttons;
+					UEDATX = 0;
+					UEDATX = 0;
+					UEDATX = 0;
+					usb_send_in();
+					return;
+				}
+				if (bRequest == HID_GET_PROTOCOL) {
+					usb_wait_in_ready();
+					UEDATX = mouse_protocol;
+					usb_send_in();
+					return;
+				}
+			}
+			if (bmRequestType == 0x21) {
+				if (bRequest == HID_SET_PROTOCOL) {
+					mouse_protocol = wValue;
+					usb_send_in();
+					return;
+				}
+			}
+		}
 		if (wIndex == DEBUG_INTERFACE) {
 			if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) {
 				len = wLength;
diff --git a/usb_device.h b/usb.h
index 233e439f4e..c1347f10dd 100644
--- a/usb_device.h
+++ b/usb.h
@@ -1,10 +1,8 @@
-#ifndef USB_DEVICE_H
-#define  USB_DEVICE_H 1
+#ifndef USB_H
+#define  USB_H 1
 
 #include <stdint.h>
 #include <avr/io.h>
-#include "usb_keyboard.h"
-#include "usb_debug.h"
 
 
 void usb_init(void);			// initialize everything
diff --git a/usb_debug.h b/usb_debug.h
index acc6716cde..65ad05b04a 100644
--- a/usb_debug.h
+++ b/usb_debug.h
@@ -2,11 +2,11 @@
 #define  USB_DEBUG_H 1
 
 #include <stdint.h>
-#include "usb_device.h"
+#include "usb.h"
 
 
-#define DEBUG_INTERFACE		1
-#define DEBUG_TX_ENDPOINT	4
+#define DEBUG_INTERFACE		2
+#define DEBUG_TX_ENDPOINT	3
 #define DEBUG_TX_SIZE		32
 #define DEBUG_TX_BUFFER		EP_DOUBLE_BUFFER
 
diff --git a/usb_keyboard.h b/usb_keyboard.h
index cd8ec4a9d1..90c2c5af62 100644
--- a/usb_keyboard.h
+++ b/usb_keyboard.h
@@ -2,11 +2,11 @@
 #define  USB_KEYBOARD_H 1
 
 #include <stdint.h>
-#include "usb_device.h"
+#include "usb.h"
 
 
 #define KEYBOARD_INTERFACE	0
-#define KEYBOARD_ENDPOINT	3
+#define KEYBOARD_ENDPOINT	1
 #define KEYBOARD_SIZE		8
 #define KEYBOARD_BUFFER		EP_DOUBLE_BUFFER
 
diff --git a/usbkeycodes.h b/usb_keycodes.h
index b0e7058363..95160398d8 100644
--- a/usbkeycodes.h
+++ b/usb_keycodes.h
@@ -1,5 +1,8 @@
-/* Some modified from Keyboard Upgrade 0.3.0
- * 2010/08/22
+/* 
+ * Key codes from HID Keyboard/Keypad Page
+ * http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
+ *
+ * Based on Keyboard Upgrade v0.3.0 http://github.com/rhomann/kbupgrade
  */
 /*
  * Keyboard Upgrade -- Firmware for homebrew computer keyboard controllers.
@@ -30,17 +33,10 @@
  * MA  02110-1301  USA
  */
 
-#ifndef USBKEYCODES_H
-#define USBKEYCODES_H
+#ifndef USB_KEYCODES_H
+#define USB_KEYCODES_H
+
 
-/*
- * The USB keycodes are enumerated here - the first part is simply
- * an enumeration of the allowed scan-codes used for USB HID devices.
- */
-/*
- * see 10 Keyboard/Keypad Page(0x07)
- * http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
- */
 enum keycodes {
     KB_NO = 0,
     KB_ROLL_OVER,
@@ -265,11 +261,11 @@ enum keycodes {
     KB_RALT,            /* 0x40 */
     KB_RGUI,            /* 0x80 */
 
-    /* function keys */
+    /* extensions for internal use */
     FN_0 = 0xF0,
     FN_1,
     FN_2,
     FN_3,
 };
 
-#endif /* USBKEYCODES_H */
+#endif /* USB_KEYCODES_H */
diff --git a/usb_mouse.c b/usb_mouse.c
new file mode 100644
index 0000000000..539f2edd37
--- /dev/null
+++ b/usb_mouse.c
@@ -0,0 +1,62 @@
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "usb_mouse.h"
+
+
+// which buttons are currently pressed
+uint8_t mouse_buttons=0;
+
+// protocol setting from the host.  We use exactly the same report
+// either way, so this variable only stores the setting since we
+// are required to be able to report which setting is in use.
+uint8_t mouse_protocol=1;
+
+
+// Set the mouse buttons.  To create a "click", 2 calls are needed,
+// one to push the button down and the second to release it
+int8_t usb_mouse_buttons(uint8_t left, uint8_t middle, uint8_t right)
+{
+	uint8_t mask=0;
+
+	if (left) mask |= 1;
+	if (middle) mask |= 4;
+	if (right) mask |= 2;
+	mouse_buttons = mask;
+	return usb_mouse_move(0, 0, 0);
+}
+
+// Move the mouse.  x, y and wheel are -127 to 127.  Use 0 for no movement.
+int8_t usb_mouse_move(int8_t x, int8_t y, int8_t wheel)
+{
+	uint8_t intr_state, timeout;
+
+	if (!usb_configured()) return -1;
+	if (x == -128) x = -127;
+	if (y == -128) y = -127;
+	if (wheel == -128) wheel = -127;
+	intr_state = SREG;
+	cli();
+	UENUM = MOUSE_ENDPOINT;
+	timeout = UDFNUML + 50;
+	while (1) {
+		// are we ready to transmit?
+		if (UEINTX & (1<<RWAL)) break;
+		SREG = intr_state;
+		// has the USB gone offline?
+		if (!usb_configured()) return -1;
+		// have we waited too long?
+		if (UDFNUML == timeout) return -1;
+		// get ready to try checking again
+		intr_state = SREG;
+		cli();
+		UENUM = MOUSE_ENDPOINT;
+	}
+	UEDATX = mouse_buttons;
+	UEDATX = x;
+	UEDATX = y;
+	UEDATX = wheel;
+	UEINTX = 0x3A;
+	SREG = intr_state;
+	return 0;
+}
+
diff --git a/usb_mouse.h b/usb_mouse.h
new file mode 100644
index 0000000000..f1f39776f7
--- /dev/null
+++ b/usb_mouse.h
@@ -0,0 +1,20 @@
+#ifndef USB_MOUSE_H
+#define  USB_MOUSE_H 1
+
+#include <stdint.h>
+#include "usb.h"
+
+
+#define MOUSE_INTERFACE		1
+#define MOUSE_ENDPOINT		2
+#define MOUSE_SIZE		8
+#define MOUSE_BUFFER		EP_DOUBLE_BUFFER
+
+extern uint8_t mouse_buttons;
+extern uint8_t mouse_protocol;
+
+
+int8_t usb_mouse_buttons(uint8_t left, uint8_t middle, uint8_t right);
+int8_t usb_mouse_move(int8_t x, int8_t y, int8_t wheel);
+
+#endif