merging tmk

6 files changed, 232 insertions, 20 deletions

diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile
index b32497cd95..f046bfdd36 100644
--- a/converter/sun_usb/Makefile
+++ b/converter/sun_usb/Makefile
@@ -2,7 +2,7 @@
 TARGET = sun_usb
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -76,10 +76,10 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/sun_usb/README b/converter/sun_usb/README
index 276f6bfff8..98340dd315 100644
--- a/converter/sun_usb/README
+++ b/converter/sun_usb/README
@@ -1,11 +1,18 @@
 Sun to USB keyboard protocol converter
 ======================================
 Target MCU is ATMega32u4 but other USB capable AVR will also work.
-Supported keyboards: Sun Type 5 Keyboard, CTCSP SHORT TYPE KEYBOARD(CKUB)
 
-CTCSP SHORT TYPE KEYBOARD: http://imgur.com/a/QIv6p
+This converter will work with Sun Type 2-5 Keyboards.
 
 
+Tested on:
+Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
+CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p
+
+
+Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository.
+https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb
+
 
 
 Connector
diff --git a/converter/sun_usb/config.h b/converter/sun_usb/config.h
index cfd39cd513..66036da931 100644
--- a/converter/sun_usb/config.h
+++ b/converter/sun_usb/config.h
@@ -56,12 +56,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_SOFT_RXD_BIT         2
 #define SERIAL_SOFT_RXD_VECT        INT2_vect
 /* RXD Interupt */
+#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
+/* enable interrupt: INT2(rising edge) */
+#define INTR_TRIG_EDGE   ((1<<ISC21)|(1<<ISC20))
+#else
+/* enable interrupt: INT2(falling edge) */
+#define INTR_TRIG_EDGE   ((1<<ISC21)|(0<<ISC20))
+#endif
 #define SERIAL_SOFT_RXD_INIT()      do { \
     /* pin configuration: input with pull-up */ \
     SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
     SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
-    /* enable interrupt: INT2(rising edge) */ \
-    EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+    EICRA |= INTR_TRIG_EDGE; \
     EIMSK |= (1<<INT2); \
     sei(); \
 } while (0)
diff --git a/converter/sun_usb/keymap_sun3.c b/converter/sun_usb/keymap_sun3.c
new file mode 100644
index 0000000000..273cd9442f
--- /dev/null
+++ b/converter/sun_usb/keymap_sun3.c
@@ -0,0 +1,173 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "util.h"
+#include "keymap.h"
+
+
+/* Sun type 3 keyboard 
+,-------.  ,-----------------------------------------------------------.  ,-----------.
+| 01| 03|  | 05| 06|     08|     0A|     0C|     0E|     10| 11| 12| 2B|  | 15| 16| 17|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 19| 1A|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2D| 2E| 2F|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 31| 33|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42  |  | 44| 45| 46|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 48| 49|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |  | 5B| 5C| 5D|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 5F| 61|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E| 6F|  | 70| 71| 72|
+`-------'  |-----------------------------------------------------------|  `-----------'
+           | 77 | 78  |               79                  | 7A  |   13 |  
+           `-----------------------------------------------------------'  
+*/
+
+
+#define KEYMAP( \
+    K01,K03,  K05,K06,    K08,    K0A,    K0C,    K0E,    K10,K11,K12,K2B,  K15,K16,K17, \
+    K19,K1A,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2D,K2E,K2F, \
+    K31,K33,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K42,  K44,K45,K46, \
+    K48,K49,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,  K5B,K5C,K5D, \
+    K5F,K61,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,     K6E,K6F,  K70,K71,K72, \
+              K77,K78,                    K79,                    K7A,K13                \
+) { \
+    { KC_NO,    KC_##K01, KC_NO,    KC_##K03, KC_NO,    KC_##K05, KC_##K06, KC_NO    }, \
+    { KC_##K08, KC_NO,    KC_##K0A, KC_NO,    KC_##K0C, KC_NO,    KC_##K0E, KC_NO    }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_NO,    KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_NO,    KC_##K19, KC_##K1A, KC_NO,    KC_NO,    KC_##K1D, KC_##K1E, KC_##K1F }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E, KC_##K2F }, \
+    { KC_NO,    KC_##K31, KC_NO,    KC_##K33, KC_NO,    KC_##K35, KC_##K36, KC_##K37 }, \
+    { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_##K44, KC_##K45, KC_##K46, KC_NO    }, \
+    { KC_##K48, KC_##K49, KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
+    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_##K5D, KC_NO,    KC_##K5F }, \
+    { KC_NO,    KC_##K61, KC_NO,    KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+    { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
+    { KC_##K70, KC_##K71, KC_##K72, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K77 }, \
+    { KC_##K78, KC_##K79, KC_##K7A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }  \
+}
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    2,              // Fn0
+    3,              // Fn1
+    4,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KC_NO,          // Fn0
+    KC_SCLN,        // Fn1
+    KC_SLSH,        // Fn2
+    KC_NO,          // Fn3
+    KC_NO,          // Fn4
+    KC_NO,          // Fn5
+    KC_NO,          // Fn6
+    KC_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    KEYMAP(
+    F10, F11,   F1, F2,     F3,     F4,     F5,     F6,      F7,  F8, F9,  BSPC,   VOLD, MUTE,   VOLU,
+    F12, F13,   ESC, 1,  2,  3,  4,  5,  6,  7,  8,  9,  0,MINS, EQL, BSLS, GRV,   MPRV, MPLY,   MNXT,
+    F14, F15,   TAB, Q,  W,  E,  R,  T,  Y,  U,  I,  O,  P,   LBRC,RBRC,    DEL,   HOME, UP,     PGUP,
+    F16, F17,   LCTL, A,  S,  D,  F,  G,  H,  J,  K,  L,  SCLN,QUOT,        ENT,   LEFT, INSERT, RIGHT, 
+    F18, F19,   LSFT,  Z,  X,  C,  V,  B,  N,  M,  COMM,DOT,SLSH,     RSFT,RCTL,   END,  DOWN,   PGDOWN,
+                LGUI, LALT,                 SPC,                      RALT,RGUI
+    ),
+    /*
+    // 0: default
+    SHORT_TYPE(
+        STOP, F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
+              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
+        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
+        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,        ENT,
+        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,  RALT,UP,  RSFT,
+        CAPS,LALT,LGUI,            SPC,              RGUI,APP, NLCK,LEFT,DOWN,RGHT
+    ),
+    // 1: with layer keys
+    SHORT_TYPE(
+        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
+              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
+        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
+        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   FN1, QUOT,        ENT,
+        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,   RSFT,UP,  FN0,
+        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, LEFT,DOWN,RGHT
+    ),
+    // 2: HHKB
+    SHORT_TYPE(
+        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
+              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
+        CAPS, NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,      BSPC,
+        LCTL,  VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,        ENT,
+        LSFT,   Z,   X,   C,   V,   B,   NO,  NO,  END, PGDN,DOWN,  RSFT,PGUP,FN0,
+        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, HOME,PGDN,END
+    ),
+    // 3: Mousekey
+    SHORT_TYPE(
+        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
+              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
+        CAPS, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,      BSPC,
+        LCTL,  NO,  ACL0,ACL1,ACL2,NO,  MS_L,MS_D,MS_U,MS_R,FN1, NO,          ENT,
+        LSFT,   NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,NO,  NO,  NO,    RSFT,UP,  NO,
+        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
+    ),
+    // 4: Cursor
+    SHORT_TYPE(
+        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
+              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
+        CAPS, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,      BSPC,
+        LCTL,  NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,          ENT,
+        LSFT,   NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,   RSFT,UP,  NO,
+        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
+    ),
+    */
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t index)
+{
+    return pgm_read_byte(&fn_layer[index]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t index)
+{
+    return pgm_read_byte(&fn_keycode[index]);
+}
diff --git a/converter/sun_usb/led.c b/converter/sun_usb/led.c
index 48c3f1c2b2..809398faa5 100644
--- a/converter/sun_usb/led.c
+++ b/converter/sun_usb/led.c
@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "stdint.h"
 #include "serial.h"
 #include "led.h"
+#include "debug.h"
 
 
 void led_set(uint8_t usb_led)
@@ -27,6 +28,7 @@ void led_set(uint8_t usb_led)
     if (usb_led & (1<<USB_LED_COMPOSE))     sun_led |= (1<<1);
     if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
     if (usb_led & (1<<USB_LED_CAPS_LOCK))   sun_led |= (1<<3);
+    xprintf("LED: %02X\n", usb_led);
 
     serial_send(0x0E);
     serial_send(sun_led);
diff --git a/converter/sun_usb/matrix.c b/converter/sun_usb/matrix.c
index f333f542bd..3126bd33ca 100644
--- a/converter/sun_usb/matrix.c
+++ b/converter/sun_usb/matrix.c
@@ -72,6 +72,21 @@ void matrix_init(void)
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
 
+    // wait for keyboard coming up
+    // otherwise LED status update fails
+    print("Reseting ");
+    while (1) {
+        print(".");
+        while (serial_recv());
+        serial_send(0x01);
+        _delay_ms(500);
+        if (serial_recv() == 0xFF) {
+            _delay_ms(500);
+            if (serial_recv() == 0x04)
+                break;
+        }
+    }
+    print(" Done\n");
     return;
 }
 
@@ -86,17 +101,26 @@ uint8_t matrix_scan(void)
     debug_hex(code); debug(" ");
 
     switch (code) {
-        case 0xFF:  // reset success
-        case 0xFE:  // layout
-        case 0x7E:  // reset fail
-            if (code == 0xFF) print("reset: 0xFF ");
-            if (code == 0x7E) print("reset fail: 0x7E ");
-            if (code == 0xFE) print("layout: 0xFE ");
-            // response byte
+        case 0xFF:  // reset success: FF 04
+            print("reset: ");
+            _delay_ms(500);
+            code = serial_recv();
+            xprintf("%02X\n", code);
+            if (code == 0x04) {
+                // LED status
+                led_set(host_keyboard_leds());
+            }
+            return 0;
+        case 0xFE:  // layout: FE <layout>
+            print("layout: ");
+            _delay_ms(500);
+            xprintf("%02X\n", serial_recv());
+            return 0;
+        case 0x7E:  // reset fail: 7E 01
+            print("reset fail: ");
             _delay_ms(500);
-            if (code = serial_recv()) print_hex8(code);
-            print("\n");
-            // FALL THROUGH
+            xprintf("%02X\n", serial_recv());
+            return 0;
         case 0x7F:
             // all keys up
             for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;