diff options
| author | Jack Humbert <jack.humb@gmail.com> | 2015-10-27 12:42:30 -0400 |
|---|---|---|
| committer | Jack Humbert <jack.humb@gmail.com> | 2015-10-27 12:42:30 -0400 |
| commit | 547da78335298df6666200c6063ac6f1aba312fd (patch) | |
| tree | 47df0252ee24b1ecc27b9dd0458c51f20bf088c3 /doc/FUSE.txt | |
| parent | a766918d5c48204375f4c207b30bbbf1389df14f (diff) | |
| parent | fa33719adab1393753312d298b8c365e04e844b9 (diff) | |
| download | qmk_firmware-547da78335298df6666200c6063ac6f1aba312fd.tar.gz qmk_firmware-547da78335298df6666200c6063ac6f1aba312fd.zip | |
merging tmk
Diffstat (limited to 'doc/FUSE.txt')
| -rw-r--r-- | doc/FUSE.txt | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/doc/FUSE.txt b/doc/FUSE.txt deleted file mode 100644 index 40055e5ab1..0000000000 --- a/doc/FUSE.txt +++ /dev/null @@ -1,40 +0,0 @@ -ATMega168P Fuse/Lock Bits -========================= -This configuration is from usbasploader's Makefile. - - HFUSE 0xD6 - LFUSE 0xDF - EFUSE 0x00 - LOCK 0x3F(intact) - -#--------------------------------------------------------------------- -# ATMega168P -#--------------------------------------------------------------------- -# Fuse extended byte: -# 0x00 = 0 0 0 0 0 0 0 0 <-- BOOTRST (boot reset vector at 0x1800) -# \+/ -# +------- BOOTSZ (00 = 2k bytes) -# Fuse high byte: -# 0xd6 = 1 1 0 1 0 1 1 0 -# ^ ^ ^ ^ ^ \-+-/ -# | | | | | +------ BODLEVEL 0..2 (110 = 1.8 V) -# | | | | + --------- EESAVE (preserve EEPROM over chip erase) -# | | | +-------------- WDTON (if 0: watchdog always on) -# | | +---------------- SPIEN (allow serial programming) -# | +------------------ DWEN (debug wire enable) -# +-------------------- RSTDISBL (reset pin is enabled) -# Fuse low byte: -# 0xdf = 1 1 0 1 1 1 1 1 -# ^ ^ \ / \--+--/ -# | | | +------- CKSEL 3..0 (external >8M crystal) -# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) -# | +------------------ CKOUT (if 0: Clock output enabled) -# +-------------------- CKDIV8 (if 0: divide by 8) - - -# Lock Bits -# 0x3f = - - 1 1 1 1 1 1 -# \ / \-/ \-/ -# | | +----- LB 2..1 (No memory lock features enabled) -# | +--------- BLB0 2..1 (No restrictions for SPM or LPM accessing the Application section) -# +--------------- BLB1 2..1 (No restrictions for SPM or LPM accessing the Boot Loader section) |