Improve consistency in UNICODEMAP code and docs, update docs/understanding_qmk (#4774)

* Remove unused UNICODE(n) macro, update docs

* Add note about max length of unicode_map to docs

* QK_UNICODE_MAP → QK_UNICODEMAP

* Refactor process_unicode_map

* process_unicode_map → process_unicodemap

This is done for consistency: UNICODEMAP is the method (hence UNICODEMAP_ENABLE, process_unicodemap), whereas unicode_map is the mapping table itself.

* Update references and ordering in docs/understanding_qmk

* Add additional note to docs/understanding_qmk

* &unicode_map[index] → unicode_map + index

This avoids the issue of the compiler sometimes complaining about the array index being out of range

* Update docs/getting_started_make_guide

* Update method sections in docs/feature_unicode

4 files changed, 64 insertions, 65 deletions

diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md
index 9d57e2fb7a..7dd85c5c2e 100644
--- a/docs/feature_unicode.md
+++ b/docs/feature_unicode.md
@@ -2,15 +2,15 @@
 
 There are three Unicode keymap definition methods available in QMK:
 
-## UNICODE_ENABLE
+## `UNICODE_ENABLE`
 
-Supports Unicode up to `0xFFFF`. The keycode function is `UC(n)` in the keymap file, where _n_ is a 4 digit hexadecimal number.
+Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap file, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
 
-## UNICODEMAP_ENABLE
+## `UNICODEMAP_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)`, where _n_ is an array index into the mapping table.
+Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 1024 entries.
 
-And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
 
 ```c
 enum unicode_names {
@@ -20,38 +20,37 @@ enum unicode_names {
 };
 
 const uint32_t PROGMEM unicode_map[] = {
-  [BANG]    = 0x203D,  // ‽
-  [IRONY]   = 0x2E2E,  // ⸮
-  [SNEK]    = 0x1F40D, // 🐍
+  [BANG]  = 0x203D,  // ‽
+  [IRONY] = 0x2E2E,  // ⸮
+  [SNEK]  = 0x1F40D, // 🐍
 };
 ```
 
-Make sure that the order for both matches.
+Then you can use `X(BANG)` etc. in your keymap.
 
-## UCIS_ENABLE
+## `UCIS_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you may want to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once it's been called, you can type the mnemonic for your character, then hit Space or Enter to complete it or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode sequence inserted.
+Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once this function's been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
 
-For instance, you would need to have a table like this in your keymap:
+For instance, you would define a table like this in your keymap file:
 
 ```c
-const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
-(
- UCIS_SYM("poop", 0x1f4a9),
- UCIS_SYM("rofl", 0x1f923),
- UCIS_SYM("kiss", 0x1f619)
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
+  UCIS_SYM("poop", 0x1F4A9), // 💩
+  UCIS_SYM("rofl", 0x1F923), // 🤣
+  UCIS_SYM("kiss", 0x1F619)  // 😙
 );
 ```
 
-You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+You call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and input the laughing emoji.
 
 ### Customization
 
-There are several functions that you can add to your keymap to customize the functionality of this feature.
+There are several functions that you can define in your keymap to customize the functionality of this feature.
 
-* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
-* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
-* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+* `void qk_ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code.
 
 You can find the default implementations of these functions in [`process_ucis.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c).
 
@@ -66,7 +65,7 @@ The following input modes are available:
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
   By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
 
-* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports all possible code points (`0x10FFFF`).
+* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
 
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
 
@@ -77,7 +76,7 @@ The following input modes are available:
 
 * **`UC_BSD`**: _(non implemented)_ Unicode input under BSD. Not implemented at this time. If you're a BSD user and want to help add support for it, please [open an issue on GitHub](https://github.com/qmk/qmk_firmware/issues).
 
-* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF`.
+* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF` (all currently assigned code points).
 
   To enable, install the [latest release](https://github.com/samhocevar/wincompose/releases/latest). Once installed, WinCompose will automatically run on startup. Works reliably under all version of Windows supported by the app.
   By default, this mode uses the right Alt key (`KC_RALT`), but this can be changed in the WinCompose settings and by defining [`UNICODE_WINC_KEY`](#input-key-configuration) with another keycode.
diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md
index e515411901..adc1aed751 100644
--- a/docs/getting_started_make_guide.md
+++ b/docs/getting_started_make_guide.md
@@ -93,19 +93,17 @@ This enables MIDI sending and receiving with your keyboard. To enter MIDI send m
 
 `UNICODE_ENABLE`
 
-This allows you to send unicode symbols via `UC(<unicode>)` in your keymap. Only codes up to 0x7FFF are currently supported.
+This allows you to send Unicode characters using `UC(<code point>)` in your keymap. Code points up to `0x7FFF` are supported. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji.
 
 `UNICODEMAP_ENABLE`
 
-This allows sending unicode symbols using `X(<unicode>)` in your keymap. Codes
-up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
-a separate mapping table in your keymap file.
+This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. 
 
-Known limitations:
-- Under Mac OS, only codes up to 0xFFFF are supported.
-- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now).
+`UCIS_ENABLE`
 
-Characters out of range supported by the OS will be ignored.
+This allows you to send Unicode characters by inputting a mnemonic corresponding to the character you want to send. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
+
+For further details, as well as limitations, see the [Unicode page](feature_unicode.md).
 
 `BLUETOOTH_ENABLE`
 
@@ -117,7 +115,7 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio p
 
 `FAUXCLICKY_ENABLE`
 
-Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
+Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`.
 
 `VARIABLE_TRACE`
 
diff --git a/docs/keycodes.md b/docs/keycodes.md
index 6d85253935..bd325b7fa2 100644
--- a/docs/keycodes.md
+++ b/docs/keycodes.md
@@ -454,7 +454,7 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Unicode Support](feature_unicode.md)
 
-|Key         |Aliases|                                                 |
-|------------|-------|-------------------------------------------------|
-|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
-|`X(n)`      |       |Send Unicode character `n` via a different method|
+|Key    |Description                                                                |
+|-------|---------------------------------------------------------------------------|
+|`UC(c)`|Send Unicode code point `c` (`UNICODE_ENABLE`)                             |
+|`X(i)` |Send Unicode code point at index `i` in `unicode_map` (`UNICODEMAP_ENABLE`)|
diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md
index 35596cc692..20ead2b3f5 100644
--- a/docs/understanding_qmk.md
+++ b/docs/understanding_qmk.md
@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -130,31 +130,33 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 
 ##### Process Record
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
-
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
-    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
-    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
-    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions. Depending on options set in `rules.mk` or elsewhere, only a subset of the functions below will be included in final firmware.
+
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
+    * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169)
+      calls one of:
+        * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
+        * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
+        * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.