clang-format changes

7 files changed, 407 insertions, 426 deletions

diff --git a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
index f248cc25ba..0755ddf6c4 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
+++ b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
@@ -19,54 +19,53 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _GDISP_LLD_BOARD_H
 
 static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
+    400000  // clock speed (Hz); 400kHz max for IS31
 };
 
 static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0x3F, 0x00, /* C5-1 -> C5-16 */
-	0x00, 0x00, /* C6-1 -> C6-16 */
-	0x00, 0x00, /* C7-1 -> C7-16 */
-	0x00, 0x00, /* C8-1 -> C8-16 */
-	0x00, 0x00, /* C9-1 -> C9-16 */
+    0xFF, 0x00, /* C1-1 -> C1-16 */
+    0xFF, 0x00, /* C2-1 -> C2-16 */
+    0xFF, 0x00, /* C3-1 -> C3-16 */
+    0xFF, 0x00, /* C4-1 -> C4-16 */
+    0x3F, 0x00, /* C5-1 -> C5-16 */
+    0x00, 0x00, /* C6-1 -> C6-16 */
+    0x00, 0x00, /* C7-1 -> C7-16 */
+    0x00, 0x00, /* C8-1 -> C8-16 */
+    0x00, 0x00, /* C9-1 -> C9-16 */
 };
 
 // The address of the LED
-#define LA(c, r) (c + r * 16 )
+#define LA(c, r) (c + r * 16)
 // Need to be an address that is not mapped, but inside the range of the controller matrix
 #define NA LA(8, 8)
 
 // The numbers in the comments are the led numbers DXX on the PCB
 // The mapping is taken from the schematic of left hand side
 static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   45        44        43        42        41        40        39
-   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-//   52        51        50        49        48        47        46
-   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-//   58        57        56        55        54        53        N/A
-   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-//   67        66        65        64        63        62        61
-   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-//   76        75        74        73        72        60        59
-   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-//   N/A       N/A       N/A       N/A       N/A       N/A       68
-   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
-//   N/A       N/A       N/A       N/A       71        70        69
-   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+    //   45        44        43        42        41        40        39
+    {LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+    //   52        51        50        49        48        47        46
+    {LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2)},
+    //   58        57        56        55        54        53        N/A
+    {LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA},
+    //   67        66        65        64        63        62        61
+    {LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2)},
+    //   76        75        74        73        72        60        59
+    {LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0)},
+    //   N/A       N/A       N/A       N/A       N/A       N/A       68
+    {NA, NA, NA, NA, NA, NA, LA(5, 4)},
+    //   N/A       N/A       N/A       N/A       71        70        69
+    {NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0)},
 };
 
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_ADDR_DEFAULT 0x74  // AD connected to GND
 #define IS31_TIMEOUT 5000
 
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+static GFXINLINE void init_board(GDisplay* g) {
+    (void)g;
     /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2);  // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2);  // PTB1/I2C0/SDA
     palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
     palClearPad(GPIOB, 16);
     /* start I2C */
@@ -77,34 +76,30 @@ static GFXINLINE void init_board(GDisplay *g) {
     I2CD1.i2c->FLT = 4;
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
+static GFXINLINE void post_init_board(GDisplay* g) { (void)g; }
 
 static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
+    (void)g;
     return led_mask;
 }
 
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) {
+    (void)g;
     return led_mapping[y][x];
 }
 
 static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
+    (void)g;
+    if (!shutdown) {
         palSetPad(GPIOB, 16);
-    }
-    else {
+    } else {
         palClearPad(GPIOB, 16);
     }
 }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length) {
+    (void)g;
+    i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
index 917adadb84..7188244022 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -19,15 +19,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT          GDISPVMT_IS31FL3731C_QMK
-#define GDISP_SCREEN_HEIGHT       LED_HEIGHT
-#define GDISP_SCREEN_WIDTH        LED_WIDTH
+#    define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK
+#    define GDISP_SCREEN_HEIGHT LED_HEIGHT
+#    define GDISP_SCREEN_WIDTH LED_WIDTH
 
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_is31fl3731c.h"
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
+#    include "board_is31fl3731c.h"
 
 // Can't include led_tables from here
 extern const uint8_t CIE1931_CURVE[];
@@ -36,96 +35,96 @@ extern const uint8_t CIE1931_CURVE[];
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_INITIAL_CONTRAST
-    #define GDISP_INITIAL_CONTRAST    0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-    #define GDISP_INITIAL_BACKLIGHT   0
-#endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 0
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 0
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH           (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#define IS31_ADDR_DEFAULT 0x74
+#    define IS31_ADDR_DEFAULT 0x74
 
-#define IS31_REG_CONFIG   0x00
+#    define IS31_REG_CONFIG 0x00
 // bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE   0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE  0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+#    define IS31_REG_CONFIG_PICTUREMODE 0x00
+#    define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#    define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
 // D2:D0 bits are starting frame for autoplay mode
 
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+#    define IS31_REG_PICTDISP 0x01  // D2:D0 frame select for picture mode
 
-#define IS31_REG_AUTOPLAYCTRL1 0x02
+#    define IS31_REG_AUTOPLAYCTRL1 0x02
 // D6:D4 number of loops (000=infty)
 // D2:D0 number of frames to be used
 
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+#    define IS31_REG_AUTOPLAYCTRL2 0x03  // D5:D0 delay time (*11ms)
 
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+#    define IS31_REG_DISPLAYOPT 0x05
+#    define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20  // same intensity for all frames
+#    define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
 // D2:D0 bits blink period time (*0.27s)
 
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+#    define IS31_REG_AUDIOSYNC 0x06
+#    define IS31_REG_AUDIOSYNC_ENABLE 0x1
 
-#define IS31_REG_FRAMESTATE 0x07
+#    define IS31_REG_FRAMESTATE 0x07
 
-#define IS31_REG_BREATHCTRL1 0x08
+#    define IS31_REG_BREATHCTRL1 0x08
 // D6:D4 fade out time (26ms*2^i)
 // D2:D0 fade in time (26ms*2^i)
 
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+#    define IS31_REG_BREATHCTRL2 0x09
+#    define IS31_REG_BREATHCTRL2_ENABLE 0x10
 // D2:D0 extinguish time (3.5ms*2^i)
 
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
+#    define IS31_REG_SHUTDOWN 0x0A
+#    define IS31_REG_SHUTDOWN_OFF 0x0
+#    define IS31_REG_SHUTDOWN_ON 0x1
 
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
+#    define IS31_REG_AGCCTRL 0x0B
+#    define IS31_REG_ADCRATE 0x0C
 
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
+#    define IS31_COMMANDREGISTER 0xFD
+#    define IS31_FUNCTIONREG 0x0B  // helpfully called 'page nine'
+#    define IS31_FUNCTIONREG_SIZE 0xD
 
-#define IS31_FRAME_SIZE 0xB4
+#    define IS31_FRAME_SIZE 0xB4
 
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
+#    define IS31_PWM_REG 0x24
+#    define IS31_PWM_SIZE 0x90
 
-#define IS31_LED_MASK_SIZE 0x12
+#    define IS31_LED_MASK_SIZE 0x12
 
-#define IS31
+#    define IS31
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
+typedef struct {
     uint8_t write_buffer_offset;
     uint8_t write_buffer[IS31_FRAME_SIZE];
     uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
     uint8_t page;
-}__attribute__((__packed__)) PrivData;
+} __attribute__((__packed__)) PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
+#    define PRIV(g) ((PrivData *)g->priv)
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
 /*===========================================================================*/
 
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+static GFXINLINE void write_page(GDisplay *g, uint8_t page) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = IS31_COMMANDREGISTER;
     tx[1] = page;
     write_data(g, tx, 2);
 }
 
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+static GFXINLINE void write_register(GDisplay *g, uint8_t page, uint8_t reg, uint8_t data) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = reg;
     tx[1] = data;
@@ -136,7 +135,7 @@ static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uin
 static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
     PRIV(g)->write_buffer_offset = offset;
     write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
+    write_data(g, (uint8_t *)PRIV(g), length + 1);
 }
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
@@ -160,10 +159,9 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
     gfxSleepMilliseconds(10);
 
-
     // zero all LED registers on all 8 pages, and enable the mask
     __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
+    for (uint8_t i = 0; i < 8; i++) {
         write_ram(g, i, 0, IS31_FRAME_SIZE);
         gfxSleepMilliseconds(1);
     }
@@ -176,133 +174,129 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     post_init_board(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
-    LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-        // Don't flush if we don't need it.
-        if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-            return;
-
-        PRIV(g)->page++;
-        PRIV(g)->page %= 2;
-        // TODO: some smarter algorithm for this
-        // We should run only one physical page at a time
-        // This way we don't need to send so much data, and
-        // we could use slightly less memory
-        uint8_t* src = PRIV(g)->frame_buffer;
-        for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-            for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-                uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-                PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-                ++src;
-            }
+#    if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    // Don't flush if we don't need it.
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
+
+    PRIV(g)->page++;
+    PRIV(g)->page %= 2;
+    // TODO: some smarter algorithm for this
+    // We should run only one physical page at a time
+    // This way we don't need to send so much data, and
+    // we could use slightly less memory
+    uint8_t *src = PRIV(g)->frame_buffer;
+    for (int y = 0; y < GDISP_SCREEN_HEIGHT; y++) {
+        for (int x = 0; x < GDISP_SCREEN_WIDTH; x++) {
+            uint8_t val                                     = (uint16_t)*src * g->g.Backlight / 100;
+            PRIV(g)->write_buffer[get_led_address(g, x, y)] = CIE1931_CURVE[val];
+            ++src;
         }
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-        g->flags &= ~GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+    gfxSleepMilliseconds(1);
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
 
-#if GDISP_HARDWARE_DRAWPIXEL
-    LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-        coord_t        x, y;
+    g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-        switch(g->g.Orientation) {
+#    if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-        g->flags |= GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
-    LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-        coord_t        x, y;
+#    if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    coord_t x, y;
 
-        switch(g->g.Orientation) {
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
     }
-#endif
+    return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+}
+#    endif
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-    LLDSPEC void gdisp_lld_control(GDisplay *g) {
-        switch(g->p.x) {
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    switch (g->p.x) {
         case GDISP_CONTROL_POWER:
-            if (g->g.Powermode == (powermode_t)g->p.ptr)
-                return;
-            switch((powermode_t)g->p.ptr) {
-            case powerOff:
-            case powerSleep:
-            case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-                break;
-            case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-                break;
-            default:
-                return;
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+                    break;
+                case powerOn:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+                    break;
+                default:
+                    return;
             }
             g->g.Powermode = (powermode_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_BACKLIGHT:
-            if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-            unsigned val = (unsigned)g->p.ptr;
+            if (g->g.Backlight == (unsigned)g->p.ptr) return;
+            unsigned val   = (unsigned)g->p.ptr;
             g->g.Backlight = val > 100 ? 100 : val;
             g->flags |= GDISP_FLG_NEEDFLUSH;
             return;
-        }
     }
-#endif // GDISP_NEED_CONTROL
+}
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
index 588d688cf6..1b9fadba16 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
@@ -24,13 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_GRAY256
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
index 9ab636c95d..194f8ea24d 100644
--- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h
+++ b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
@@ -8,10 +8,10 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9  // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0, 1, 2, 3
 /*
  * Custom page order for several LCD boards, e.g. HEM12864-99
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
@@ -25,11 +25,9 @@
 #define ST7565_SLCK_PIN 5
 #define ST7565_SS_PIN 4
 
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
 
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
 
 #define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
@@ -37,38 +35,37 @@
 // MSB First
 // CLK Low by default
 static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+    // Operation complete callback or @p NULL.
+    .end_cb = NULL,
+    // The chip select line port - when not using pcs.
+    .ssport = ST7565_GPIOPORT,
+    // brief The chip select line pad number - when not using pcs.
+    .sspad = ST7565_SS_PIN,
+    // SPI initialization data.
+    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
+            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
+            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
+            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
+            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
 };
 
 static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to acquire
     // spiAcquireBus(&SPID1);
     spiSelect(&SPID1);
 }
 
 static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
+    // spiReleaseBus(&SPID1);
     spiUnselect(&SPID1);
 }
 
 static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+    (void)g;
     palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
     palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
@@ -82,31 +79,23 @@ static GFXINLINE void init_board(GDisplay *g) {
     release_bus(g);
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-    (void) g;
-}
+static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
+    (void)g;
     if (state) {
         palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
+    } else {
         palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
     }
 }
 
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
+static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
+static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-    (void) g;
+static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
+    (void)g;
     spiSend(&SPID1, length, data);
 }
 
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
index c38194b069..fde320981b 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -9,82 +9,89 @@
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT            GDISPVMT_ST7565_QMK
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
+#    define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
-#include "board_st7565.h"
+#    include "board_st7565.h"
 
 /*===========================================================================*/
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT         LCD_HEIGHT
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH          LCD_WIDTH
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST      35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT     100
-#endif
+#    ifndef GDISP_SCREEN_HEIGHT
+#        define GDISP_SCREEN_HEIGHT LCD_HEIGHT
+#    endif
+#    ifndef GDISP_SCREEN_WIDTH
+#        define GDISP_SCREEN_WIDTH LCD_WIDTH
+#    endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 35
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 100
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH         (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#include "st7565.h"
+#    include "st7565.h"
 
 /*===========================================================================*/
 /* Driver config defaults for backward compatibility.                        */
 /*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
+#    ifndef ST7565_LCD_BIAS
+#        define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#    endif
+#    ifndef ST7565_ADC
+#        define ST7565_ADC ST7565_ADC_NORMAL
+#    endif
+#    ifndef ST7565_COM_SCAN
+#        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
+#    endif
+#    ifndef ST7565_PAGE_ORDER
+#        define ST7565_PAGE_ORDER 0, 1, 2, 3
+#    endif
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
-    bool_t buffer2;
+typedef struct {
+    bool_t  buffer2;
     uint8_t data_pos;
     uint8_t data[16];
     uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
+} PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)                          (PRIV(g)->ram)
+#    define PRIV(g) ((PrivData *)g->priv)
+#    define RAM(g) (PRIV(g)->ram)
 
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; }
 
-static GFXINLINE void flush_cmd(GDisplay* g) {
+static GFXINLINE void flush_cmd(GDisplay *g) {
     write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
     PRIV(g)->data_pos = 0;
 }
 
-#define write_cmd2(g, cmd1, cmd2)        { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)  { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+#    define write_cmd2(g, cmd1, cmd2) \
+        {                             \
+            write_cmd(g, cmd1);       \
+            write_cmd(g, cmd2);       \
+        }
+#    define write_cmd3(g, cmd1, cmd2, cmd3) \
+        {                                   \
+            write_cmd(g, cmd1);             \
+            write_cmd(g, cmd2);             \
+            write_cmd(g, cmd3);             \
+        }
 
 // Some common routines and macros
-#define delay(us)           gfxSleepMicroseconds(us)
-#define delay_ms(ms)        gfxSleepMilliseconds(ms)
+#    define delay(us) gfxSleepMicroseconds(us)
+#    define delay_ms(ms) gfxSleepMilliseconds(ms)
 
-#define xyaddr(x, y)        ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)            (1<<((y)&7))
+#    define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH)
+#    define xybit(y) (1 << ((y)&7))
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
@@ -99,8 +106,8 @@ static GFXINLINE void flush_cmd(GDisplay* g) {
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
+    g->priv           = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2  = false;
     PRIV(g)->data_pos = 0;
 
     // Initialise the board interface
@@ -139,22 +146,21 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     release_bus(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
+#    if GDISP_HARDWARE_FLUSH
 LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned    p;
+    unsigned p;
 
     // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
 
     acquire_bus(g);
     enter_cmd_mode(g);
@@ -166,7 +172,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
         write_cmd(g, ST7565_RMW);
         flush_cmd(g);
         enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
         enter_cmd_mode(g);
     }
     unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
@@ -177,30 +183,30 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
 
     g->flags &= ~GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_DRAWPIXEL
+#    if GDISP_HARDWARE_DRAWPIXEL
 LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     if (gdispColor2Native(g->p.color) != Black)
         RAM(g)[xyaddr(x, y)] |= xybit(y);
@@ -208,53 +214,52 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
         RAM(g)[xyaddr(x, y)] &= ~xybit(y);
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
+#    if GDISP_HARDWARE_PIXELREAD
 LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
 }
-#endif
+#    endif
 
 LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
+    uint8_t *buffer     = (uint8_t *)g->p.ptr;
+    int      linelength = g->p.cx;
     for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
+        unsigned dstx   = g->p.x;
+        unsigned dsty   = g->p.y + i;
+        unsigned srcx   = g->p.x1;
+        unsigned srcy   = g->p.y1 + i;
         unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+        for (int j = 0; j < linelength; j++) {
+            uint8_t  src    = buffer[srcbit / 8];
+            uint8_t  bit    = 7 - (srcbit % 8);
+            uint8_t  bitset = (src >> bit) & 1;
+            uint8_t *dst    = &(RAM(g)[xyaddr(dstx, dsty)]);
             if (bitset) {
                 *dst |= xybit(dsty);
-            }
-            else {
+            } else {
                 *dst &= ~xybit(dsty);
             }
             dstx++;
@@ -264,66 +269,64 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
 LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
+    switch (g->p.x) {
+        case GDISP_CONTROL_POWER:
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_OFF);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                case powerOn:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_ON);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                default:
+                    return;
+            }
+            g->g.Powermode = (powermode_t)g->p.ptr;
             return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
+        case GDISP_CONTROL_CONTRAST:
+            g->g.Contrast = (unsigned)g->p.ptr & 63;
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+            flush_cmd(g);
+            release_bus(g);
+            return;
     }
 }
-#endif // GDISP_NEED_CONTROL
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
index 4446bd38bc..9ab5daac1c 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
@@ -14,14 +14,14 @@
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
+#    define GDISP_HARDWARE_BITFILLS TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h
index 24924ff050..3c77a88569 100644
--- a/drivers/ugfx/gdisp/st7565/st7565.h
+++ b/drivers/ugfx/gdisp/st7565/st7565.h
@@ -8,32 +8,32 @@
 #ifndef _ST7565_H
 #define _ST7565_H
 
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
+#define ST7565_CONTRAST 0x81
+#define ST7565_ALLON_NORMAL 0xA4
+#define ST7565_ALLON 0xA5
+#define ST7565_POSITIVE_DISPLAY 0xA6
+#define ST7565_INVERT_DISPLAY 0xA7
+#define ST7565_DISPLAY_OFF 0xAE
+#define ST7565_DISPLAY_ON 0xAF
 
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
+#define ST7565_LCD_BIAS_7 0xA3
+#define ST7565_LCD_BIAS_9 0xA2
 
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
+#define ST7565_ADC_NORMAL 0xA0
+#define ST7565_ADC_REVERSE 0xA1
 
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
+#define ST7565_COM_SCAN_INC 0xC0
+#define ST7565_COM_SCAN_DEC 0xC8
 
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
+#define ST7565_START_LINE 0x40
+#define ST7565_PAGE 0xB0
+#define ST7565_COLUMN_MSB 0x10
+#define ST7565_COLUMN_LSB 0x00
+#define ST7565_RMW 0xE0
 
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
+#define ST7565_RESISTOR_RATIO 0x20
+#define ST7565_POWER_CONTROL 0x28
 
-#define ST7565_RESET                0xE2
+#define ST7565_RESET 0xE2
 
 #endif /* _ST7565_H */