diff options
| author | Joel Challis <git@zvecr.com> | 2021-08-17 23:43:09 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-08-17 23:43:09 +0100 |
| commit | 1bb7af4d446174b7181c9bb22dbd14c93642ea10 (patch) | |
| tree | 894eceeb29cc2c00f6b0f08a4ca177da7f172424 /drivers | |
| parent | 483691dd73e5260fac958c524e0a12e705db43f6 (diff) | |
| download | qmk_firmware-1bb7af4d446174b7181c9bb22dbd14c93642ea10.tar.gz qmk_firmware-1bb7af4d446174b7181c9bb22dbd14c93642ea10.zip | |
Relocate platform specific drivers (#13894)
* Relocate platform specific drivers
* Move stm eeprom
* Tidy up slightly
Diffstat (limited to 'drivers')
35 files changed, 0 insertions, 5635 deletions
diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c deleted file mode 100644 index 8d299ffdb9..0000000000 --- a/drivers/avr/analog.c +++ /dev/null @@ -1,138 +0,0 @@ -/* Copyright 2015 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <avr/io.h> -#include <avr/pgmspace.h> -#include <stdint.h> -#include "analog.h" - -static uint8_t aref = ADC_REF_POWER; - -void analogReference(uint8_t mode) { aref = mode & (_BV(REFS1) | _BV(REFS0)); } - -// Arduino compatible pin input -int16_t analogRead(uint8_t pin) { -#if defined(__AVR_ATmega32U4__) - // clang-format off - static const uint8_t PROGMEM pin_to_mux[] = { - //A0 A1 A2 A3 A4 A5 - //F7 F6 F5 F4 F1 F0 - 0x07, 0x06, 0x05, 0x04, 0x01, 0x00, - //A6 A7 A8 A9 A10 A11 - //D4 D7 B4 B5 B6 D6 - 0x20, 0x22, 0x23, 0x24, 0x25, 0x21 - }; - // clang-format on - if (pin >= 12) return 0; - return adc_read(pgm_read_byte(pin_to_mux + pin)); -#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - if (pin >= 8) return 0; - return adc_read(pin); -#else - return 0; -#endif -} - -int16_t analogReadPin(pin_t pin) { return adc_read(pinToMux(pin)); } - -uint8_t pinToMux(pin_t pin) { - switch (pin) { - // clang-format off -#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) - case F0: return 0; // ADC0 - case F1: return _BV(MUX0); // ADC1 - case F2: return _BV(MUX1); // ADC2 - case F3: return _BV(MUX1) | _BV(MUX0); // ADC3 - case F4: return _BV(MUX2); // ADC4 - case F5: return _BV(MUX2) | _BV(MUX0); // ADC5 - case F6: return _BV(MUX2) | _BV(MUX1); // ADC6 - case F7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 - default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V -#elif defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) - case F0: return 0; // ADC0 - case F1: return _BV(MUX0); // ADC1 - case F4: return _BV(MUX2); // ADC4 - case F5: return _BV(MUX2) | _BV(MUX0); // ADC5 - case F6: return _BV(MUX2) | _BV(MUX1); // ADC6 - case F7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 - case D4: return _BV(MUX5); // ADC8 - case D6: return _BV(MUX5) | _BV(MUX0); // ADC9 - case D7: return _BV(MUX5) | _BV(MUX1); // ADC10 - case B4: return _BV(MUX5) | _BV(MUX1) | _BV(MUX0); // ADC11 - case B5: return _BV(MUX5) | _BV(MUX2); // ADC12 - case B6: return _BV(MUX5) | _BV(MUX2) | _BV(MUX0); // ADC13 - default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V -#elif defined(__AVR_ATmega32A__) - case A0: return 0; // ADC0 - case A1: return _BV(MUX0); // ADC1 - case A2: return _BV(MUX1); // ADC2 - case A3: return _BV(MUX1) | _BV(MUX0); // ADC3 - case A4: return _BV(MUX2); // ADC4 - case A5: return _BV(MUX2) | _BV(MUX0); // ADC5 - case A6: return _BV(MUX2) | _BV(MUX1); // ADC6 - case A7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 - default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V -#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - case C0: return 0; // ADC0 - case C1: return _BV(MUX0); // ADC1 - case C2: return _BV(MUX1); // ADC2 - case C3: return _BV(MUX1) | _BV(MUX0); // ADC3 - case C4: return _BV(MUX2); // ADC4 - case C5: return _BV(MUX2) | _BV(MUX0); // ADC5 - // ADC7:6 not present in DIP package and not shared by GPIO pins - default: return _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V -#endif - // clang-format on - } - return 0; -} - -int16_t adc_read(uint8_t mux) { - uint16_t low; - - // Enable ADC and configure prescaler - ADCSRA = _BV(ADEN) | ADC_PRESCALER; - -#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) - // High speed mode and ADC8-13 - ADCSRB = _BV(ADHSM) | (mux & _BV(MUX5)); -#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) - // High speed mode only - ADCSRB = _BV(ADHSM); -#endif - - // Configure mux input -#if defined(MUX4) - ADMUX = aref | (mux & (_BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0))); -#else - ADMUX = aref | (mux & (_BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0))); -#endif - - // Start the conversion - ADCSRA |= _BV(ADSC); - // Wait for result - while (ADCSRA & _BV(ADSC)) - ; - // Must read LSB first - low = ADCL; - // Must read MSB only once! - low |= (ADCH << 8); - - // turn off the ADC - ADCSRA &= ~(1 << ADEN); - - return low; -} diff --git a/drivers/avr/analog.h b/drivers/avr/analog.h deleted file mode 100644 index 058882450d..0000000000 --- a/drivers/avr/analog.h +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2015 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> -#include "quantum.h" - -#ifdef __cplusplus -extern "C" { -#endif -void analogReference(uint8_t mode); -int16_t analogRead(uint8_t pin); - -int16_t analogReadPin(pin_t pin); -uint8_t pinToMux(pin_t pin); - -int16_t adc_read(uint8_t mux); -#ifdef __cplusplus -} -#endif - -#define ADC_REF_EXTERNAL 0 // AREF, Internal Vref turned off -#define ADC_REF_POWER _BV(REFS0) // AVCC with external capacitor on AREF pin -#define ADC_REF_INTERNAL (_BV(REFS1) | _BV(REFS0)) // Internal 2.56V Voltage Reference with external capacitor on AREF pin (1.1V for 328P) - -// These prescaler values are for high speed mode, ADHSM = 1 -#if F_CPU == 16000000L || F_CPU == 12000000L -# define ADC_PRESCALER (_BV(ADPS2) | _BV(ADPS1)) // /64 -#elif F_CPU == 8000000L -# define ADC_PRESCALER (_BV(ADPS2) | _BV(ADPS0)) // /32 -#elif F_CPU == 4000000L -# define ADC_PRESCALER (_BV(ADPS2)) // /16 -#elif F_CPU == 2000000L -# define ADC_PRESCALER (_BV(ADPS1) | _BV(ADPS0)) // /8 -#elif F_CPU == 1000000L -# define ADC_PRESCALER _BV(ADPS1) // /4 -#else -# define ADC_PRESCALER _BV(ADPS0) // /2 -#endif diff --git a/drivers/avr/glcdfont.c b/drivers/avr/glcdfont.c deleted file mode 100644 index 5e763b054f..0000000000 --- a/drivers/avr/glcdfont.c +++ /dev/null @@ -1,23 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#include "progmem.h" - -// Standard ASCII 5x7 font - -static const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, - 0x30, 0x38, 0x3E, 0x38, 0x30, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, - 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, - 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut - 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut - 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut - 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut - 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code - 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block - 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block - 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, - 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta - 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP -}; diff --git a/drivers/avr/hd44780.c b/drivers/avr/hd44780.c deleted file mode 100644 index f71069dece..0000000000 --- a/drivers/avr/hd44780.c +++ /dev/null @@ -1,536 +0,0 @@ -/**************************************************************************** - Title: HD44780U LCD library - Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury - License: GNU General Public License Version 3 - File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $ - Software: AVR-GCC 3.3 - Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega - - DESCRIPTION - Basic routines for interfacing a HD44780U-based text lcd display - - Originally based on Volker Oth's lcd library, - changed lcd_init(), added additional constants for lcd_command(), - added 4-bit I/O mode, improved and optimized code. - - Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in - 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported. - - Memory mapped mode compatible with Kanda STK200, but supports also - generation of R/W signal through A8 address line. - - USAGE - See the C include lcd.h file for a description of each function - -*****************************************************************************/ -#include <inttypes.h> -#include <avr/io.h> -#include <avr/pgmspace.h> -#include <util/delay.h> -#include "hd44780.h" - -/* -** constants/macros -*/ -#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ -#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) -/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ -# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2))) -#else -# define PIN(x) (*(&x - 2)) /* address of input register of port x */ -#endif - -#if LCD_IO_MODE -# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) -# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); -# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); -# define lcd_e_toggle() toggle_e() -# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) -# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) -# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) -# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) -#endif - -#if LCD_IO_MODE -# if LCD_LINES == 1 -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE -# else -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES -# endif -#else -# if LCD_LINES == 1 -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE -# else -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES -# endif -#endif - -#if LCD_CONTROLLER_KS0073 -# if LCD_LINES == 4 - -# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ -# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ -# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ - -# endif -#endif - -/* -** function prototypes -*/ -#if LCD_IO_MODE -static void toggle_e(void); -#endif - -/* -** local functions -*/ - -/************************************************************************* -delay for a minimum of <us> microseconds -the number of loops is calculated at compile-time from MCU clock frequency -*************************************************************************/ -#define delay(us) _delay_us(us) - -#if LCD_IO_MODE -/* toggle Enable Pin to initiate write */ -static void toggle_e(void) { - lcd_e_high(); - lcd_e_delay(); - lcd_e_low(); -} -#endif - -/************************************************************************* -Low-level function to write byte to LCD controller -Input: data byte to write to LCD - rs 1: write data - 0: write instruction -Returns: none -*************************************************************************/ -#if LCD_IO_MODE -static void lcd_write(uint8_t data, uint8_t rs) { - unsigned char dataBits; - - if (rs) { /* write data (RS=1, RW=0) */ - lcd_rs_high(); - } else { /* write instruction (RS=0, RW=0) */ - lcd_rs_low(); - } - lcd_rw_low(); /* RW=0 write mode */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - /* configure data pins as output */ - DDR(LCD_DATA0_PORT) |= 0x0F; - - /* output high nibble first */ - dataBits = LCD_DATA0_PORT & 0xF0; - LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F); - lcd_e_toggle(); - - /* output low nibble */ - LCD_DATA0_PORT = dataBits | (data & 0x0F); - lcd_e_toggle(); - - /* all data pins high (inactive) */ - LCD_DATA0_PORT = dataBits | 0x0F; - } else { - /* configure data pins as output */ - DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); - - /* output high nibble first */ - LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); - LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); - LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - lcd_e_toggle(); - - /* output low nibble */ - LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); - LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); - LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - lcd_e_toggle(); - - /* all data pins high (inactive) */ - LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - } -} -#else -# define lcd_write(d, rs) \ - if (rs) \ - *(volatile uint8_t *)(LCD_IO_DATA) = d; \ - else \ - *(volatile uint8_t *)(LCD_IO_FUNCTION) = d; -/* rs==0 -> write instruction to LCD_IO_FUNCTION */ -/* rs==1 -> write data to LCD_IO_DATA */ -#endif - -/************************************************************************* -Low-level function to read byte from LCD controller -Input: rs 1: read data - 0: read busy flag / address counter -Returns: byte read from LCD controller -*************************************************************************/ -#if LCD_IO_MODE -static uint8_t lcd_read(uint8_t rs) { - uint8_t data; - - if (rs) - lcd_rs_high(); /* RS=1: read data */ - else - lcd_rs_low(); /* RS=0: read busy flag */ - lcd_rw_high(); /* RW=1 read mode */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ - - lcd_e_high(); - lcd_e_delay(); - data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ - lcd_e_low(); - - lcd_e_delay(); /* Enable 500ns low */ - - lcd_e_high(); - lcd_e_delay(); - data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */ - lcd_e_low(); - } else { - /* configure data pins as input */ - DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN); - - /* read high nibble first */ - lcd_e_high(); - lcd_e_delay(); - data = 0; - if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10; - if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20; - if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40; - if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80; - lcd_e_low(); - - lcd_e_delay(); /* Enable 500ns low */ - - /* read low nibble */ - lcd_e_high(); - lcd_e_delay(); - if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01; - if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02; - if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04; - if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08; - lcd_e_low(); - } - return data; -} -#else -# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ) -/* rs==0 -> read instruction from LCD_IO_FUNCTION */ -/* rs==1 -> read data from LCD_IO_DATA */ -#endif - -/************************************************************************* -loops while lcd is busy, returns address counter -*************************************************************************/ -static uint8_t lcd_waitbusy(void) - -{ - register uint8_t c; - - /* wait until busy flag is cleared */ - while ((c = lcd_read(0)) & (1 << LCD_BUSY)) { - } - - /* the address counter is updated 4us after the busy flag is cleared */ - delay(LCD_DELAY_BUSY_FLAG); - - /* now read the address counter */ - return (lcd_read(0)); // return address counter - -} /* lcd_waitbusy */ - -/************************************************************************* -Move cursor to the start of next line or to the first line if the cursor -is already on the last line. -*************************************************************************/ -static inline void lcd_newline(uint8_t pos) { - register uint8_t addressCounter; - -#if LCD_LINES == 1 - addressCounter = 0; -#endif -#if LCD_LINES == 2 - if (pos < (LCD_START_LINE2)) - addressCounter = LCD_START_LINE2; - else - addressCounter = LCD_START_LINE1; -#endif -#if LCD_LINES == 4 -# if KS0073_4LINES_MODE - if (pos < LCD_START_LINE2) - addressCounter = LCD_START_LINE2; - else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3)) - addressCounter = LCD_START_LINE3; - else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4)) - addressCounter = LCD_START_LINE4; - else - addressCounter = LCD_START_LINE1; -# else - if (pos < LCD_START_LINE3) - addressCounter = LCD_START_LINE2; - else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4)) - addressCounter = LCD_START_LINE3; - else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2)) - addressCounter = LCD_START_LINE4; - else - addressCounter = LCD_START_LINE1; -# endif -#endif - lcd_command((1 << LCD_DDRAM) + addressCounter); - -} /* lcd_newline */ - -/* -** PUBLIC FUNCTIONS -*/ - -/************************************************************************* -Send LCD controller instruction command -Input: instruction to send to LCD controller, see HD44780 data sheet -Returns: none -*************************************************************************/ -void lcd_command(uint8_t cmd) { - lcd_waitbusy(); - lcd_write(cmd, 0); -} - -/************************************************************************* -Send data byte to LCD controller -Input: data to send to LCD controller, see HD44780 data sheet -Returns: none -*************************************************************************/ -void lcd_data(uint8_t data) { - lcd_waitbusy(); - lcd_write(data, 1); -} - -/************************************************************************* -Set cursor to specified position -Input: x horizontal position (0: left most position) - y vertical position (0: first line) -Returns: none -*************************************************************************/ -void lcd_gotoxy(uint8_t x, uint8_t y) { -#if LCD_LINES == 1 - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); -#endif -#if LCD_LINES == 2 - if (y == 0) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); - else - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); -#endif -#if LCD_LINES == 4 - if (y == 0) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); - else if (y == 1) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); - else if (y == 2) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x); - else /* y==3 */ - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x); -#endif - -} /* lcd_gotoxy */ - -/************************************************************************* -*************************************************************************/ -int lcd_getxy(void) { return lcd_waitbusy(); } - -/************************************************************************* -Clear display and set cursor to home position -*************************************************************************/ -void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); } - -/************************************************************************* -Set cursor to home position -*************************************************************************/ -void lcd_home(void) { lcd_command(1 << LCD_HOME); } - -/************************************************************************* -Display character at current cursor position -Input: character to be displayed -Returns: none -*************************************************************************/ -void lcd_putc(char c) { - uint8_t pos; - - pos = lcd_waitbusy(); // read busy-flag and address counter - if (c == '\n') { - lcd_newline(pos); - } else { -#if LCD_WRAP_LINES == 1 -# if LCD_LINES == 1 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# elif LCD_LINES == 2 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); - } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# elif LCD_LINES == 4 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); - } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0); - } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0); - } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# endif - lcd_waitbusy(); -#endif - lcd_write(c, 1); - } - -} /* lcd_putc */ - -/************************************************************************* -Display string without auto linefeed -Input: string to be displayed -Returns: none -*************************************************************************/ -void lcd_puts(const char *s) -/* print string on lcd (no auto linefeed) */ -{ - register char c; - - while ((c = *s++)) { - lcd_putc(c); - } - -} /* lcd_puts */ - -/************************************************************************* -Display string from program memory without auto linefeed -Input: string from program memory be be displayed -Returns: none -*************************************************************************/ -void lcd_puts_p(const char *progmem_s) -/* print string from program memory on lcd (no auto linefeed) */ -{ - register char c; - - while ((c = pgm_read_byte(progmem_s++))) { - lcd_putc(c); - } - -} /* lcd_puts_p */ - -/************************************************************************* -Initialize display and select type of cursor -Input: dispAttr LCD_DISP_OFF display off - LCD_DISP_ON display on, cursor off - LCD_DISP_ON_CURSOR display on, cursor on - LCD_DISP_CURSOR_BLINK display on, cursor on flashing -Returns: none -*************************************************************************/ -void lcd_init(uint8_t dispAttr) { -#if LCD_IO_MODE - /* - * Initialize LCD to 4 bit I/O mode - */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) { - /* configure all port bits as output (all LCD lines on same port) */ - DDR(LCD_DATA0_PORT) |= 0x7F; - } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */ - DDR(LCD_DATA0_PORT) |= 0x0F; - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); - } else { - /* configure all port bits as output (LCD data and control lines on different ports */ - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); - DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); - } - delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */ - - /* initial write to lcd is 8bit */ - LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4; - LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; - lcd_e_toggle(); - delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ - - /* repeat last command */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ - - /* repeat last command a third time */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ - - /* now configure for 4bit mode */ - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 - lcd_e_toggle(); - delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ - - /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ -#else - /* - * Initialize LCD to 8 bit memory mapped mode - */ - - /* enable external SRAM (memory mapped lcd) and one wait state */ - MCUCR = _BV(SRE) | _BV(SRW); - - /* reset LCD */ - delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT); /* wait 5ms */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ -#endif - -#if KS0073_4LINES_MODE - /* Display with KS0073 controller requires special commands for enabling 4 line mode */ - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); - lcd_command(KS0073_4LINES_MODE); - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); -#else - lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ -#endif - lcd_command(LCD_DISP_OFF); /* display off */ - lcd_clrscr(); /* display clear */ - lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ - lcd_command(dispAttr); /* display/cursor control */ - -} /* lcd_init */ diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h deleted file mode 100644 index 08e60f8a44..0000000000 --- a/drivers/avr/hd44780.h +++ /dev/null @@ -1,348 +0,0 @@ -/************************************************************************* - Title : C include file for the HD44780U LCD library (lcd.c) - Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury - License: GNU General Public License Version 3 - File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ - Software: AVR-GCC 4.x - Hardware: any AVR device, memory mapped mode only for AVR with - memory mapped interface (AT90S8515/ATmega8515/ATmega128) -***************************************************************************/ - -/** - @mainpage - Collection of libraries for AVR-GCC - @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury - @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - - @file - @defgroup pfleury_lcd LCD library <lcd.h> - @code #include <lcd.h> @endcode - - @brief Basic routines for interfacing a HD44780U-based character LCD display - - LCD character displays can be found in many devices, like espresso machines, laser printers. - The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. - - This library allows easy interfacing with a HD44780 compatible display and can be - operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in - 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. - - Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports - generation of R/W signal through A8 address line. - - @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a> - on my home page, which shows example circuits how to connect an LCD to an AVR controller. - - @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury - - @version 2.0 - - @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - -*/ - -#pragma once - -#include <inttypes.h> -#include <avr/pgmspace.h> - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 -# error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" -#endif - -/**@{*/ - -/* - * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file - * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - */ -#ifdef _LCD_DEFINITIONS_FILE -# include "lcd_definitions.h" -#endif - -/** - * @name Definition for LCD controller type - * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. - */ -#ifndef LCD_CONTROLLER_KS0073 -# define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ -#endif - -/** - * @name Definitions for Display Size - * Change these definitions to adapt setting to your display - * - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - * - */ -#ifndef LCD_LINES -# define LCD_LINES 2 /**< number of visible lines of the display */ -#endif -#ifndef LCD_DISP_LENGTH -# define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ -#endif -#ifndef LCD_LINE_LENGTH -# define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ -#endif -#ifndef LCD_START_LINE1 -# define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ -#endif -#ifndef LCD_START_LINE2 -# define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ -#endif -#ifndef LCD_START_LINE3 -# define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ -#endif -#ifndef LCD_START_LINE4 -# define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ -#endif -#ifndef LCD_WRAP_LINES -# define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ -#endif - -/** - * @name Definitions for 4-bit IO mode - * - * The four LCD data lines and the three control lines RS, RW, E can be on the - * same port or on different ports. - * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on - * different ports. - * - * Normally the four data lines should be mapped to bit 0..3 on one port, but it - * is possible to connect these data lines in different order or even on different - * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. - * - * Adjust these definitions to your target.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - * - */ -#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ - -#if LCD_IO_MODE - -# ifndef LCD_PORT -# define LCD_PORT PORTA /**< port for the LCD lines */ -# endif -# ifndef LCD_DATA0_PORT -# define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ -# endif -# ifndef LCD_DATA1_PORT -# define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ -# endif -# ifndef LCD_DATA2_PORT -# define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ -# endif -# ifndef LCD_DATA3_PORT -# define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ -# endif -# ifndef LCD_DATA0_PIN -# define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ -# endif -# ifndef LCD_DATA1_PIN -# define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ -# endif -# ifndef LCD_DATA2_PIN -# define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ -# endif -# ifndef LCD_DATA3_PIN -# define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ -# endif -# ifndef LCD_RS_PORT -# define LCD_RS_PORT LCD_PORT /**< port for RS line */ -# endif -# ifndef LCD_RS_PIN -# define LCD_RS_PIN 3 /**< pin for RS line */ -# endif -# ifndef LCD_RW_PORT -# define LCD_RW_PORT LCD_PORT /**< port for RW line */ -# endif -# ifndef LCD_RW_PIN -# define LCD_RW_PIN 2 /**< pin for RW line */ -# endif -# ifndef LCD_E_PORT -# define LCD_E_PORT LCD_PORT /**< port for Enable line */ -# endif -# ifndef LCD_E_PIN -# define LCD_E_PIN 1 /**< pin for Enable line */ -# endif - -#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) -/* - * memory mapped mode is only supported when the device has an external data memory interface - */ -# define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ -# define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ -# define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ - -#else -# error "external data memory interface not available for this device, use 4-bit IO port mode" - -#endif - -/** - * @name Definitions of delays - * Used to calculate delay timers. - * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target - * - * These delay times can be adjusted, if some displays require different delays.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - */ -#ifndef LCD_DELAY_BOOTUP -# define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ -#endif -#ifndef LCD_DELAY_INIT -# define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ -#endif -#ifndef LCD_DELAY_INIT_REP -# define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ -#endif -#ifndef LCD_DELAY_INIT_4BIT -# define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ -#endif -#ifndef LCD_DELAY_BUSY_FLAG -# define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ -#endif -#ifndef LCD_DELAY_ENABLE_PULSE -# define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ -#endif - -/** - * @name Definitions for LCD command instructions - * The constants define the various LCD controller instructions which can be passed to the - * function lcd_command(), see HD44780 data sheet for a complete description. - */ - -/* instruction register bit positions, see HD44780U data sheet */ -#define LCD_CLR 0 /* DB0: clear display */ -#define LCD_HOME 1 /* DB1: return to home position */ -#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ -#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ -#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ -#define LCD_ON 3 /* DB3: turn lcd/cursor on */ -#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ -#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ -#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ -#define LCD_MOVE 4 /* DB4: move cursor/display */ -#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ -#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ -#define LCD_FUNCTION 5 /* DB5: function set */ -#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ -#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ -#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ -#define LCD_CGRAM 6 /* DB6: set CG RAM address */ -#define LCD_DDRAM 7 /* DB7: set DD RAM address */ -#define LCD_BUSY 7 /* DB7: LCD is busy */ - -/* set entry mode: display shift on/off, dec/inc cursor move direction */ -#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ -#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ -#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ -#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ - -/* display on/off, cursor on/off, blinking char at cursor position */ -#define LCD_DISP_OFF 0x08 /* display off */ -#define LCD_DISP_ON 0x0C /* display on, cursor off */ -#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ -#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ -#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ - -/* move cursor/shift display */ -#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ -#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ -#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ -#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ - -/* function set: set interface data length and number of display lines */ -#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ - -#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC)) - -/** - * @name Functions - */ - -/** - @brief Initialize display and select type of cursor - @param dispAttr \b LCD_DISP_OFF display off\n - \b LCD_DISP_ON display on, cursor off\n - \b LCD_DISP_ON_CURSOR display on, cursor on\n - \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing - @return none -*/ -extern void lcd_init(uint8_t dispAttr); - -/** - @brief Clear display and set cursor to home position - @return none -*/ -extern void lcd_clrscr(void); - -/** - @brief Set cursor to home position - @return none -*/ -extern void lcd_home(void); - -/** - @brief Set cursor to specified position - - @param x horizontal position\n (0: left most position) - @param y vertical position\n (0: first line) - @return none -*/ -extern void lcd_gotoxy(uint8_t x, uint8_t y); - -/** - @brief Display character at current cursor position - @param c character to be displayed - @return none -*/ -extern void lcd_putc(char c); - -/** - @brief Display string without auto linefeed - @param s string to be displayed - @return none -*/ -extern void lcd_puts(const char *s); - -/** - @brief Display string from program memory without auto linefeed - @param progmem_s string from program memory be be displayed - @return none - @see lcd_puts_P -*/ -extern void lcd_puts_p(const char *progmem_s); - -/** - @brief Send LCD controller instruction command - @param cmd instruction to send to LCD controller, see HD44780 data sheet - @return none -*/ -extern void lcd_command(uint8_t cmd); - -/** - @brief Send data byte to LCD controller - - Similar to lcd_putc(), but without interpreting LF - @param data byte to send to LCD controller, see HD44780 data sheet - @return none -*/ -extern void lcd_data(uint8_t data); - -/** - @brief macros for automatically storing string constant in program memory -*/ -#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) - -/**@}*/ diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c deleted file mode 100644 index 2773e00778..0000000000 --- a/drivers/avr/i2c_master.c +++ /dev/null @@ -1,241 +0,0 @@ -/* Copyright (C) 2019 Elia Ritterbusch - + - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -/* Library made by: g4lvanix - * GitHub repository: https://github.com/g4lvanix/I2C-master-lib - */ - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c_master.h" -#include "timer.h" -#include "wait.h" - -#ifndef F_SCL -# define F_SCL 400000UL // SCL frequency -#endif - -#ifndef I2C_START_RETRY_COUNT -# define I2C_START_RETRY_COUNT 20 -#endif // I2C_START_RETRY_COUNT - -#define TWBR_val (((F_CPU / F_SCL) - 16) / 2) - -#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) - -void i2c_init(void) { - TWSR = 0; /* no prescaler */ - TWBR = (uint8_t)TWBR_val; - -#ifdef __AVR_ATmega32A__ - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -#endif -} - -static i2c_status_t i2c_start_impl(uint8_t address, uint16_t timeout) { - // reset TWI control register - TWCR = 0; - // transmit START condition - TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // check if the start condition was successfully transmitted - if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) { - return I2C_STATUS_ERROR; - } - - // load slave address into data register - TWDR = address; - // start transmission of address - TWCR = (1 << TWINT) | (1 << TWEN); - - timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return I2C_STATUS_ERROR; - } - - return I2C_STATUS_SUCCESS; -} - -i2c_status_t i2c_start(uint8_t address, uint16_t timeout) { - // Retry i2c_start_impl a bunch times in case the remote side has interrupts disabled. - uint16_t timeout_timer = timer_read(); - uint16_t time_slice = MAX(1, (timeout == (I2C_TIMEOUT_INFINITE)) ? 5 : (timeout / (I2C_START_RETRY_COUNT))); // if it's infinite, wait 1ms between attempts, otherwise split up the entire timeout into the number of retries - i2c_status_t status; - do { - status = i2c_start_impl(address, time_slice); - } while ((status < 0) && ((timeout == I2C_TIMEOUT_INFINITE) || (timer_elapsed(timeout_timer) < timeout))); - return status; -} - -i2c_status_t i2c_write(uint8_t data, uint16_t timeout) { - // load data into data register - TWDR = data; - // start transmission of data - TWCR = (1 << TWINT) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) { - return I2C_STATUS_ERROR; - } - - return I2C_STATUS_SUCCESS; -} - -int16_t i2c_read_ack(uint16_t timeout) { - // start TWI module and acknowledge data after reception - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // return received data from TWDR - return TWDR; -} - -int16_t i2c_read_nack(uint16_t timeout) { - // start receiving without acknowledging reception - TWCR = (1 << TWINT) | (1 << TWEN); - - uint16_t timeout_timer = timer_read(); - while (!(TWCR & (1 << TWINT))) { - if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) { - return I2C_STATUS_TIMEOUT; - } - } - - // return received data from TWDR - return TWDR; -} - -i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); - - for (uint16_t i = 0; i < length && status >= 0; i++) { - status = i2c_write(data[i], timeout); - } - - i2c_stop(); - - return status; -} - -i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_READ, timeout); - - for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { - status = i2c_read_ack(timeout); - if (status >= 0) { - data[i] = status; - } - } - - if (status >= 0) { - status = i2c_read_nack(timeout); - if (status >= 0) { - data[(length - 1)] = status; - } - } - - i2c_stop(); - - return (status < 0) ? status : I2C_STATUS_SUCCESS; -} - -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(devaddr | 0x00, timeout); - if (status >= 0) { - status = i2c_write(regaddr, timeout); - - for (uint16_t i = 0; i < length && status >= 0; i++) { - status = i2c_write(data[i], timeout); - } - } - - i2c_stop(); - - return status; -} - -i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(devaddr, timeout); - if (status < 0) { - goto error; - } - - status = i2c_write(regaddr, timeout); - if (status < 0) { - goto error; - } - - status = i2c_start(devaddr | 0x01, timeout); - - for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { - status = i2c_read_ack(timeout); - if (status >= 0) { - data[i] = status; - } - } - - if (status >= 0) { - status = i2c_read_nack(timeout); - if (status >= 0) { - data[(length - 1)] = status; - } - } - -error: - i2c_stop(); - - return (status < 0) ? status : I2C_STATUS_SUCCESS; -} - -void i2c_stop(void) { - // transmit STOP condition - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); -} diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h deleted file mode 100644 index e5af73364b..0000000000 --- a/drivers/avr/i2c_master.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright (C) 2019 Elia Ritterbusch - + - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -/* Library made by: g4lvanix - * GitHub repository: https://github.com/g4lvanix/I2C-master-lib - */ - -#pragma once - -#define I2C_READ 0x01 -#define I2C_WRITE 0x00 - -typedef int16_t i2c_status_t; - -#define I2C_STATUS_SUCCESS (0) -#define I2C_STATUS_ERROR (-1) -#define I2C_STATUS_TIMEOUT (-2) - -#define I2C_TIMEOUT_IMMEDIATE (0) -#define I2C_TIMEOUT_INFINITE (0xFFFF) - -void i2c_init(void); -i2c_status_t i2c_start(uint8_t address, uint16_t timeout); -i2c_status_t i2c_write(uint8_t data, uint16_t timeout); -int16_t i2c_read_ack(uint16_t timeout); -int16_t i2c_read_nack(uint16_t timeout); -i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -void i2c_stop(void); diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c deleted file mode 100644 index 2907f164c0..0000000000 --- a/drivers/avr/i2c_slave.c +++ /dev/null @@ -1,111 +0,0 @@ -/* Copyright (C) 2019 Elia Ritterbusch - + - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -/* Library made by: g4lvanix - * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib - */ - -#include <stddef.h> -#include <avr/io.h> -#include <util/twi.h> -#include <avr/interrupt.h> -#include <stdbool.h> - -#include "i2c_slave.h" - -#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) -# include "transactions.h" - -static volatile bool is_callback_executor = false; -#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - -volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; - -static volatile uint8_t buffer_address; -static volatile bool slave_has_register_set = false; - -void i2c_slave_init(uint8_t address) { - // load address into TWI address register - TWAR = address; - // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt - TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN); -} - -void i2c_slave_stop(void) { - // clear acknowledge and enable bits - TWCR &= ~((1 << TWEA) | (1 << TWEN)); -} - -ISR(TWI_vect) { - uint8_t ack = 1; - - switch (TW_STATUS) { - case TW_SR_SLA_ACK: - // The device is now a slave receiver - slave_has_register_set = false; -#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - is_callback_executor = false; -#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - break; - - case TW_SR_DATA_ACK: - // This device is a slave receiver and has received data - // First byte is the location then the bytes will be writen in buffer with auto-increment - if (!slave_has_register_set) { - buffer_address = TWDR; - - if (buffer_address >= I2C_SLAVE_REG_COUNT) { // address out of bounds dont ack - ack = 0; - buffer_address = 0; - } - slave_has_register_set = true; // address has been received now fill in buffer - -#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - // Work out if we're attempting to execute a callback - is_callback_executor = buffer_address == split_transaction_table[I2C_EXECUTE_CALLBACK].initiator2target_offset; -#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - } else { - i2c_slave_reg[buffer_address] = TWDR; - buffer_address++; - -#if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - // If we're intending to execute a transaction callback, do so, as we've just received the transaction ID - if (is_callback_executor) { - split_transaction_desc_t *trans = &split_transaction_table[split_shmem->transaction_id]; - if (trans->slave_callback) { - trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans)); - } - } -#endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // This device is a slave transmitter and master has requested data - TWDR = i2c_slave_reg[buffer_address]; - buffer_address++; - break; - - case TW_BUS_ERROR: - // We got an error, reset i2c - TWCR = 0; - default: - break; - } - - // Reset i2c state machine to be ready for next interrupt - TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN); -} diff --git a/drivers/avr/i2c_slave.h b/drivers/avr/i2c_slave.h deleted file mode 100644 index a8647c9da3..0000000000 --- a/drivers/avr/i2c_slave.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright (C) 2019 Elia Ritterbusch - + - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -/* Library made by: g4lvanix - * GitHub repository: https://github.com/g4lvanix/I2C-slave-lib - - Info: Inititate the library by giving the required address. - Read or write to the necessary buffer according to the opperation. - */ - -#pragma once - -#ifndef I2C_SLAVE_REG_COUNT - -# if defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) -# include "transport.h" -# define I2C_SLAVE_REG_COUNT sizeof(split_shared_memory_t) -# else // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) -# define I2C_SLAVE_REG_COUNT 30 -# endif // defined(USE_I2C) && defined(SPLIT_COMMON_TRANSACTIONS) - -#endif // I2C_SLAVE_REG_COUNT - -_Static_assert(I2C_SLAVE_REG_COUNT < 256, "I2C target registers must be single byte"); - -extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; - -void i2c_slave_init(uint8_t address); -void i2c_slave_stop(void); diff --git a/drivers/avr/serial.c b/drivers/avr/serial.c deleted file mode 100644 index 9a7345a53d..0000000000 --- a/drivers/avr/serial.c +++ /dev/null @@ -1,529 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -# define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -# if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) -# error serial.c is not supported for the currently selected MCU -# endif -// if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial. -# if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -# if defined(USE_AVR_I2C) && (SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1) -# error Using I2C, so can not use PD0, PD1 -# endif -# endif -// PD0..PD3, common config -# if SOFT_SERIAL_PIN == D0 -# define EIMSK_BIT _BV(INT0) -# define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) -# define SERIAL_PIN_INTERRUPT INT0_vect -# define EICRx EICRA -# elif SOFT_SERIAL_PIN == D1 -# define EIMSK_BIT _BV(INT1) -# define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) -# define SERIAL_PIN_INTERRUPT INT1_vect -# define EICRx EICRA -# elif SOFT_SERIAL_PIN == D2 -# define EIMSK_BIT _BV(INT2) -# define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) -# define SERIAL_PIN_INTERRUPT INT2_vect -# define EICRx EICRA -# elif SOFT_SERIAL_PIN == D3 -# define EIMSK_BIT _BV(INT3) -# define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) -# define SERIAL_PIN_INTERRUPT INT3_vect -# define EICRx EICRA -# endif - -// ATmegaxxU2/AT90USB162 specific config -# if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB162__) -// PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4) -# if SOFT_SERIAL_PIN == D4 -# define EIMSK_BIT _BV(INT5) -# define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51))) -# define SERIAL_PIN_INTERRUPT INT5_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == D6 -# define EIMSK_BIT _BV(INT6) -# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) -# define SERIAL_PIN_INTERRUPT INT6_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == D7 -# define EIMSK_BIT _BV(INT7) -# define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71))) -# define SERIAL_PIN_INTERRUPT INT7_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == C7 -# define EIMSK_BIT _BV(INT4) -# define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41))) -# define SERIAL_PIN_INTERRUPT INT4_vect -# define EICRx EICRB -# endif -# endif - -// ATmegaxxU4 specific config -# if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) -// PE6(INT6) -# if SOFT_SERIAL_PIN == E6 -# define EIMSK_BIT _BV(INT6) -# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) -# define SERIAL_PIN_INTERRUPT INT6_vect -# define EICRx EICRB -# endif -# endif - -// AT90USBxxx specific config -# if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -// PE4..PE7(INT4..INT7) -# if SOFT_SERIAL_PIN == E4 -# define EIMSK_BIT _BV(INT4) -# define EICRx_BIT (~(_BV(ISC40) | _BV(ISC41))) -# define SERIAL_PIN_INTERRUPT INT4_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == E5 -# define EIMSK_BIT _BV(INT5) -# define EICRx_BIT (~(_BV(ISC50) | _BV(ISC51))) -# define SERIAL_PIN_INTERRUPT INT5_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == E6 -# define EIMSK_BIT _BV(INT6) -# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) -# define SERIAL_PIN_INTERRUPT INT6_vect -# define EICRx EICRB -# elif SOFT_SERIAL_PIN == E7 -# define EIMSK_BIT _BV(INT7) -# define EICRx_BIT (~(_BV(ISC70) | _BV(ISC71))) -# define SERIAL_PIN_INTERRUPT INT7_vect -# define EICRx EICRB -# endif -# endif - -# ifndef SERIAL_PIN_INTERRUPT -# error invalid SOFT_SERIAL_PIN value -# endif - -# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) -# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) - -# define ALWAYS_INLINE __attribute__((always_inline)) -# define NO_INLINE __attribute__((noinline)) -# define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -# define ODD_PARITY 1 -# define EVEN_PARITY 0 -# define PARITY EVEN_PARITY - -# ifdef SERIAL_DELAY -// custom setup in config.h -// #define TID_SEND_ADJUST 2 -// #define SERIAL_DELAY 6 // micro sec -// #define READ_WRITE_START_ADJUST 30 // cycles -// #define READ_WRITE_WIDTH_ADJUST 8 // cycles -# else -// ============ Standard setups ============ - -# ifndef SELECT_SOFT_SERIAL_SPEED -# define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps (Experimental only) -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -# endif - -# if __GNUC__ < 6 -# define TID_SEND_ADJUST 14 -# else -# define TID_SEND_ADJUST 2 -# endif - -# if SELECT_SOFT_SERIAL_SPEED == 0 -// Very High speed -# define SERIAL_DELAY 4 // micro sec -# if __GNUC__ < 6 -# define READ_WRITE_START_ADJUST 33 // cycles -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_START_ADJUST 34 // cycles -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# elif SELECT_SOFT_SERIAL_SPEED == 1 -// High speed -# define SERIAL_DELAY 6 // micro sec -# if __GNUC__ < 6 -# define READ_WRITE_START_ADJUST 30 // cycles -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_START_ADJUST 33 // cycles -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# elif SELECT_SOFT_SERIAL_SPEED == 2 -// Middle speed -# define SERIAL_DELAY 12 // micro sec -# define READ_WRITE_START_ADJUST 30 // cycles -# if __GNUC__ < 6 -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# elif SELECT_SOFT_SERIAL_SPEED == 3 -// Low speed -# define SERIAL_DELAY 24 // micro sec -# define READ_WRITE_START_ADJUST 30 // cycles -# if __GNUC__ < 6 -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# elif SELECT_SOFT_SERIAL_SPEED == 4 -// Very Low speed -# define SERIAL_DELAY 36 // micro sec -# define READ_WRITE_START_ADJUST 30 // cycles -# if __GNUC__ < 6 -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# elif SELECT_SOFT_SERIAL_SPEED == 5 -// Ultra Low speed -# define SERIAL_DELAY 48 // micro sec -# define READ_WRITE_START_ADJUST 30 // cycles -# if __GNUC__ < 6 -# define READ_WRITE_WIDTH_ADJUST 3 // cycles -# else -# define READ_WRITE_WIDTH_ADJUST 7 // cycles -# endif -# else -# error invalid SELECT_SOFT_SERIAL_SPEED value -# endif /* SELECT_SOFT_SERIAL_SPEED */ -# endif /* SERIAL_DELAY */ - -# define SERIAL_DELAY_HALF1 (SERIAL_DELAY / 2) -# define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY / 2) - -# define SLAVE_INT_WIDTH_US 1 -# define SLAVE_INT_ACK_WIDTH_UNIT 2 -# define SLAVE_INT_ACK_WIDTH 4 - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); } - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); } - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); } - -inline static void serial_output(void) ALWAYS_INLINE; -inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); } - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static void serial_input_with_pullup(void) { setPinInputHigh(SOFT_SERIAL_PIN); } - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static uint8_t serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); } - -inline static void serial_low(void) ALWAYS_INLINE; -inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); } - -inline static void serial_high(void) ALWAYS_INLINE; -inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); } - -void soft_serial_initiator_init(void) { - serial_output(); - serial_high(); -} - -void soft_serial_target_init(void) { - serial_input_with_pullup(); - - // Enable INT0-INT7 - EIMSK |= EIMSK_BIT; - EICRx &= EICRx_BIT; -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY * 5 && serial_read_pin(); i++) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()) - ; -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for (i = 0, byte = 0, p = PARITY; i < bit; i++) { - serial_delay_half1(); // read the middle of pulses - if (serial_read_pin()) { - byte = (byte << 1) | 1; - p ^= 1; - } else { - byte = (byte << 1) | 0; - p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb) ? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for (p = PARITY, b = 1 << (bit - 1); b; b >>= 1) { - if (data & b) { - serial_high(); - p ^= 1; - } else { - serial_low(); - p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if (p & 1) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data, 8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static void change_sender2reciver(void) { - sync_send(); // 0 - serial_delay_half1(); // 1 - serial_low(); // 2 - serial_input_with_pullup(); // 2 - serial_delay_half1(); // 3 -} - -inline static void change_reciver2sender(void) { - sync_recv(); // 0 - serial_delay(); // 1 - serial_low(); // 3 - serial_output(); // 3 - serial_delay_half1(); // 4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) { - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount, 8); - tid = bits >> 3; - bits = (bits & 7) != (nibble_bits_count(tid) & 7); - if (bits || pecount > 0 || tid > NUM_TOTAL_TRANSACTIONS) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT * SLAVE_INT_ACK_WIDTH); - split_transaction_desc_t *trans = &split_transaction_table[tid]; - serial_low(); // response step2 ack high->low - - // If the transaction has a callback, we can execute it now - if (trans->slave_callback) { - trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans)); - } - - // target send phase - if (trans->target2initiator_buffer_size > 0) serial_send_packet((uint8_t *)split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if (trans->initiator2target_buffer_size > 0) { - if (serial_recive_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); // weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -int soft_serial_transaction(int sstd_index) { - if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR; - split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; - - if (!trans->status) return TRANSACTION_TYPE_ERROR; // not registered - - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - - // send transaction table index - int tid = (sstd_index << 3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 8); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while (!serial_read_pin()) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for (int i = 0; serial_read_pin(); i++) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } - - // initiator recive phase - // if the target is present syncronize with it - if (trans->target2initiator_buffer_size > 0) { - if (!serial_recive_packet((uint8_t *)split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if (trans->initiator2target_buffer_size > 0) { - serial_send_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -int soft_serial_get_and_clean_status(int sstd_index) { - split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0; - ; - sei(); - return retval; -} -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) -// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/drivers/avr/spi_master.c b/drivers/avr/spi_master.c deleted file mode 100644 index 4e8fd3bcdf..0000000000 --- a/drivers/avr/spi_master.c +++ /dev/null @@ -1,180 +0,0 @@ -/* Copyright 2020 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#include "spi_master.h" - -#include "timer.h" - -#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -# define SPI_SCK_PIN B1 -# define SPI_MOSI_PIN B2 -# define SPI_MISO_PIN B3 -#elif defined(__AVR_ATmega32A__) -# define SPI_SCK_PIN B7 -# define SPI_MOSI_PIN B5 -# define SPI_MISO_PIN B6 -#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) -# define SPI_SCK_PIN B5 -# define SPI_MOSI_PIN B3 -# define SPI_MISO_PIN B4 -#endif - -#ifndef SPI_TIMEOUT -# define SPI_TIMEOUT 100 -#endif - -static pin_t currentSlavePin = NO_PIN; -static uint8_t currentSlaveConfig = 0; -static bool currentSlave2X = false; - -void spi_init(void) { - writePinHigh(SPI_SS_PIN); - setPinOutput(SPI_SCK_PIN); - setPinOutput(SPI_MOSI_PIN); - setPinInput(SPI_MISO_PIN); - - SPCR = (_BV(SPE) | _BV(MSTR)); -} - -bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { - if (currentSlavePin != NO_PIN || slavePin == NO_PIN) { - return false; - } - - currentSlaveConfig = 0; - - if (lsbFirst) { - currentSlaveConfig |= _BV(DORD); - } - - switch (mode) { - case 1: - currentSlaveConfig |= _BV(CPHA); - break; - case 2: - currentSlaveConfig |= _BV(CPOL); - break; - case 3: - currentSlaveConfig |= (_BV(CPOL) | _BV(CPHA)); - break; - } - - uint16_t roundedDivisor = 1; - while (roundedDivisor < divisor) { - roundedDivisor <<= 1; - } - - switch (roundedDivisor) { - case 16: - currentSlaveConfig |= _BV(SPR0); - break; - case 64: - currentSlaveConfig |= _BV(SPR1); - break; - case 128: - currentSlaveConfig |= (_BV(SPR1) | _BV(SPR0)); - break; - case 2: - currentSlave2X = true; - break; - case 8: - currentSlave2X = true; - currentSlaveConfig |= _BV(SPR0); - break; - case 32: - currentSlave2X = true; - currentSlaveConfig |= _BV(SPR1); - break; - } - - SPCR |= currentSlaveConfig; - if (currentSlave2X) { - SPSR |= _BV(SPI2X); - } - currentSlavePin = slavePin; - setPinOutput(currentSlavePin); - writePinLow(currentSlavePin); - - return true; -} - -spi_status_t spi_write(uint8_t data) { - SPDR = data; - - uint16_t timeout_timer = timer_read(); - while (!(SPSR & _BV(SPIF))) { - if ((timer_read() - timeout_timer) >= SPI_TIMEOUT) { - return SPI_STATUS_TIMEOUT; - } - } - - return SPDR; -} - -spi_status_t spi_read() { - SPDR = 0x00; // Dummy - - uint16_t timeout_timer = timer_read(); - while (!(SPSR & _BV(SPIF))) { - if ((timer_read() - timeout_timer) >= SPI_TIMEOUT) { - return SPI_STATUS_TIMEOUT; - } - } - - return SPDR; -} - -spi_status_t spi_transmit(const uint8_t *data, uint16_t length) { - spi_status_t status; - - for (uint16_t i = 0; i < length; i++) { - status = spi_write(data[i]); - - if (status < 0) { - return status; - } - } - - return SPI_STATUS_SUCCESS; -} - -spi_status_t spi_receive(uint8_t *data, uint16_t length) { - spi_status_t status; - - for (uint16_t i = 0; i < length; i++) { - status = spi_read(); - - if (status >= 0) { - data[i] = status; - } else { - return status; - } - } - - return SPI_STATUS_SUCCESS; -} - -void spi_stop(void) { - if (currentSlavePin != NO_PIN) { - setPinOutput(currentSlavePin); - writePinHigh(currentSlavePin); - currentSlavePin = NO_PIN; - SPSR &= ~(_BV(SPI2X)); - SPCR &= ~(currentSlaveConfig); - currentSlaveConfig = 0; - currentSlave2X = false; - } -} diff --git a/drivers/avr/spi_master.h b/drivers/avr/spi_master.h deleted file mode 100644 index 8a30f47ae4..0000000000 --- a/drivers/avr/spi_master.h +++ /dev/null @@ -1,59 +0,0 @@ -/* Copyright 2020 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdbool.h> - -#include "gpio.h" - -typedef int16_t spi_status_t; - -// Hardware SS pin is defined in the header so that user code can refer to it -#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -# define SPI_SS_PIN B0 -#elif defined(__AVR_ATmega32A__) -# define SPI_SS_PIN B4 -#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) -# define SPI_SS_PIN B2 -#endif - -#define SPI_STATUS_SUCCESS (0) -#define SPI_STATUS_ERROR (-1) -#define SPI_STATUS_TIMEOUT (-2) - -#define SPI_TIMEOUT_IMMEDIATE (0) -#define SPI_TIMEOUT_INFINITE (0xFFFF) - -#ifdef __cplusplus -extern "C" { -#endif -void spi_init(void); - -bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor); - -spi_status_t spi_write(uint8_t data); - -spi_status_t spi_read(void); - -spi_status_t spi_transmit(const uint8_t *data, uint16_t length); - -spi_status_t spi_receive(uint8_t *data, uint16_t length); - -void spi_stop(void); -#ifdef __cplusplus -} -#endif diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c deleted file mode 100644 index 1a09a2bcb7..0000000000 --- a/drivers/avr/ssd1306.c +++ /dev/null @@ -1,319 +0,0 @@ -#ifdef SSD1306OLED - -# include "ssd1306.h" -# include "i2c.h" -# include <string.h> -# include "print.h" -# include "glcdfont.c" -# ifdef PROTOCOL_LUFA -# include "lufa.h" -# endif -# include "sendchar.h" -# include "timer.h" - -struct CharacterMatrix display; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -# define DEBUG_TO_SCREEN 0 - -// static uint16_t last_battery_update; -// static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -# define ScreenOffInterval 300000 /* milliseconds */ -# if DEBUG_TO_SCREEN -static uint8_t displaying; -# endif -static uint16_t last_flush; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -# define send_cmd1(c) \ - if (!_send_cmd1(c)) { \ - goto done; \ - } -# define send_cmd2(c, o) \ - if (!_send_cmd2(c, o)) { \ - goto done; \ - } -# define send_cmd3(c, o1, o2) \ - if (!_send_cmd3(c, o1, o2)) { \ - goto done; \ - } - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -# if DEBUG_TO_SCREEN -# undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -# endif - -bool iota_gfx_init(void) { - bool success = false; - - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - -# ifdef OLED_ROTATE180 - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); -# endif -# ifndef OLED_ROTATE180 - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); -# endif - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -# if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -# endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); } - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { matrix_write(&display, data); } - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); } - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { matrix_clear(&display); } - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -# if DEBUG_TO_SCREEN - ++displaying; -# endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -# if DEBUG_TO_SCREEN - --displaying; -# endif -} - -void iota_gfx_flush(void) { matrix_render(&display); } - -__attribute__((weak)) void iota_gfx_task_user(void) {} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h deleted file mode 100644 index 6eecdcfaa4..0000000000 --- a/drivers/avr/ssd1306.h +++ /dev/null @@ -1,87 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdio.h> -#include "config.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -# define SSD1306_ADDRESS 0x3C -#endif - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -extern struct CharacterMatrix display; - -bool iota_gfx_init(void); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); diff --git a/drivers/avr/uart.c b/drivers/avr/uart.c deleted file mode 100644 index c6abcb6fe0..0000000000 --- a/drivers/avr/uart.c +++ /dev/null @@ -1,170 +0,0 @@ -/* UART Example for Teensy USB Development Board - * http://www.pjrc.com/teensy/ - * Copyright (c) 2009 PJRC.COM, LLC - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -// Version 1.0: Initial Release -// Version 1.1: Add support for Teensy 2.0, minor optimizations - -#include <avr/io.h> -#include <avr/interrupt.h> - -#include "uart.h" - -#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -# define UDRn UDR1 -# define UBRRnL UBRR1L -# define UCSRnA UCSR1A -# define UCSRnB UCSR1B -# define UCSRnC UCSR1C -# define U2Xn U2X1 -# define RXENn RXEN1 -# define TXENn TXEN1 -# define RXCIEn RXCIE1 -# define UCSZn1 UCSZ11 -# define UCSZn0 UCSZ10 -# define UDRIEn UDRIE1 -# define USARTn_UDRE_vect USART1_UDRE_vect -# define USARTn_RX_vect USART1_RX_vect -#elif defined(__AVR_ATmega32A__) -# define UDRn UDR -# define UBRRnL UBRRL -# define UCSRnA UCSRA -# define UCSRnB UCSRB -# define UCSRnC UCSRC -# define U2Xn U2X -# define RXENn RXEN -# define TXENn TXEN -# define RXCIEn RXCIE -# define UCSZn1 UCSZ1 -# define UCSZn0 UCSZ0 -# define UDRIEn UDRIE -# define USARTn_UDRE_vect USART_UDRE_vect -# define USARTn_RX_vect USART_RX_vect -#elif defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) -# define UDRn UDR0 -# define UBRRnL UBRR0L -# define UCSRnA UCSR0A -# define UCSRnB UCSR0B -# define UCSRnC UCSR0C -# define U2Xn U2X0 -# define RXENn RXEN0 -# define TXENn TXEN0 -# define RXCIEn RXCIE0 -# define UCSZn1 UCSZ01 -# define UCSZn0 UCSZ00 -# define UDRIEn UDRIE0 -# define USARTn_UDRE_vect USART_UDRE_vect -# define USARTn_RX_vect USART_RX_vect -#endif - -// These buffers may be any size from 2 to 256 bytes. -#define RX_BUFFER_SIZE 64 -#define TX_BUFFER_SIZE 256 - -static volatile uint8_t tx_buffer[TX_BUFFER_SIZE]; -static volatile uint8_t tx_buffer_head; -static volatile uint8_t tx_buffer_tail; -static volatile uint8_t rx_buffer[RX_BUFFER_SIZE]; -static volatile uint8_t rx_buffer_head; -static volatile uint8_t rx_buffer_tail; - -// Initialize the UART -void uart_init(uint32_t baud) { - cli(); - UBRRnL = (F_CPU / 4 / baud - 1) / 2; - UCSRnA = (1 << U2Xn); - UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn); - UCSRnC = (1 << UCSZn1) | (1 << UCSZn0); - tx_buffer_head = tx_buffer_tail = 0; - rx_buffer_head = rx_buffer_tail = 0; - sei(); -} - -// Transmit a byte -void uart_putchar(uint8_t c) { - uint8_t i; - - i = tx_buffer_head + 1; - if (i >= TX_BUFFER_SIZE) i = 0; - // return immediately to avoid deadlock when interrupt is disabled(called from ISR) - if (tx_buffer_tail == i && (SREG & (1 << SREG_I)) == 0) return; - while (tx_buffer_tail == i) - ; // wait until space in buffer - // cli(); - tx_buffer[i] = c; - tx_buffer_head = i; - UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn) | (1 << UDRIEn); - // sei(); -} - -// Receive a byte -uint8_t uart_getchar(void) { - uint8_t c, i; - - while (rx_buffer_head == rx_buffer_tail) - ; // wait for character - i = rx_buffer_tail + 1; - if (i >= RX_BUFFER_SIZE) i = 0; - c = rx_buffer[i]; - rx_buffer_tail = i; - return c; -} - -// Return whether the number of bytes waiting in the receive buffer is nonzero. -// Call this before uart_getchar() to check if it will need -// to wait for a byte to arrive. -bool uart_available(void) { - uint8_t head, tail; - - head = rx_buffer_head; - tail = rx_buffer_tail; - if (head >= tail) return (head - tail) > 0; - return (RX_BUFFER_SIZE + head - tail) > 0; -} - -// Transmit Interrupt -ISR(USARTn_UDRE_vect) { - uint8_t i; - - if (tx_buffer_head == tx_buffer_tail) { - // buffer is empty, disable transmit interrupt - UCSRnB = (1 << RXENn) | (1 << TXENn) | (1 << RXCIEn); - } else { - i = tx_buffer_tail + 1; - if (i >= TX_BUFFER_SIZE) i = 0; - UDRn = tx_buffer[i]; - tx_buffer_tail = i; - } -} - -// Receive Interrupt -ISR(USARTn_RX_vect) { - uint8_t c, i; - - c = UDRn; - i = rx_buffer_head + 1; - if (i >= RX_BUFFER_SIZE) i = 0; - if (i != rx_buffer_tail) { - rx_buffer[i] = c; - rx_buffer_head = i; - } -} diff --git a/drivers/avr/uart.h b/drivers/avr/uart.h deleted file mode 100644 index 602eb3d8b0..0000000000 --- a/drivers/avr/uart.h +++ /dev/null @@ -1,35 +0,0 @@ -/* UART Example for Teensy USB Development Board - * http://www.pjrc.com/teensy/ - * Copyright (c) 2009 PJRC.COM, LLC - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#pragma once - -#include <stdint.h> -#include <stdbool.h> - -void uart_init(uint32_t baud); - -void uart_putchar(uint8_t c); - -uint8_t uart_getchar(void); - -bool uart_available(void); diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c deleted file mode 100644 index 77c492cd4c..0000000000 --- a/drivers/avr/ws2812.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * light weight WS2812 lib V2.0b - * - * Controls WS2811/WS2812/WS2812B RGB-LEDs - * Author: Tim (cpldcpu@gmail.com) - * - * Jan 18th, 2014 v2.0b Initial Version - * Nov 29th, 2015 v2.3 Added SK6812RGBW support - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "ws2812.h" -#include <avr/interrupt.h> -#include <avr/io.h> -#include <util/delay.h> - -#define pinmask(pin) (_BV((pin)&0xF)) - -/* - * Forward declare internal functions - * - * The functions take a byte-array and send to the data output as WS2812 bitstream. - * The length is the number of bytes to send - three per LED. - */ - -static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi); - -void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) { - DDRx_ADDRESS(RGB_DI_PIN) |= pinmask(RGB_DI_PIN); - - uint8_t masklo = ~(pinmask(RGB_DI_PIN)) & PORTx_ADDRESS(RGB_DI_PIN); - uint8_t maskhi = pinmask(RGB_DI_PIN) | PORTx_ADDRESS(RGB_DI_PIN); - - ws2812_sendarray_mask((uint8_t *)ledarray, number_of_leds * sizeof(LED_TYPE), masklo, maskhi); - - _delay_us(WS2812_TRST_US); -} - -/* - This routine writes an array of bytes with RGB values to the Dataout pin - using the fast 800kHz clockless WS2811/2812 protocol. -*/ - -// Timing in ns -#define w_zeropulse 350 -#define w_onepulse 900 -#define w_totalperiod 1250 - -// Fixed cycles used by the inner loop -#define w_fixedlow 2 -#define w_fixedhigh 4 -#define w_fixedtotal 8 - -// Insert NOPs to match the timing, if possible -#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000) -#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000) -#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000) - -// w1_nops - nops between rising edge and falling edge - low -#if w_zerocycles >= w_fixedlow -# define w1_nops (w_zerocycles - w_fixedlow) -#else -# define w1_nops 0 -#endif - -// w2_nops - nops between fe low and fe high -#if w_onecycles >= (w_fixedhigh + w1_nops) -# define w2_nops (w_onecycles - w_fixedhigh - w1_nops) -#else -# define w2_nops 0 -#endif - -// w3_nops - nops to complete loop -#if w_totalcycles >= (w_fixedtotal + w1_nops + w2_nops) -# define w3_nops (w_totalcycles - w_fixedtotal - w1_nops - w2_nops) -#else -# define w3_nops 0 -#endif - -// The only critical timing parameter is the minimum pulse length of the "0" -// Warn or throw error if this timing can not be met with current F_CPU settings. -#define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000) -#if w_lowtime > 550 -# error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" -#elif w_lowtime > 450 -# warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." -# warning "Please consider a higher clockspeed, if possible" -#endif - -#define w_nop1 "nop \n\t" -#define w_nop2 "rjmp .+0 \n\t" -#define w_nop4 w_nop2 w_nop2 -#define w_nop8 w_nop4 w_nop4 -#define w_nop16 w_nop8 w_nop8 - -static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi) { - uint8_t curbyte, ctr, sreg_prev; - - sreg_prev = SREG; - cli(); - - while (datlen--) { - curbyte = (*data++); - - asm volatile(" ldi %0,8 \n\t" - "loop%=: \n\t" - " out %2,%3 \n\t" // '1' [01] '0' [01] - re -#if (w1_nops & 1) - w_nop1 -#endif -#if (w1_nops & 2) - w_nop2 -#endif -#if (w1_nops & 4) - w_nop4 -#endif -#if (w1_nops & 8) - w_nop8 -#endif -#if (w1_nops & 16) - w_nop16 -#endif - " sbrs %1,7 \n\t" // '1' [03] '0' [02] - " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low - " lsl %1 \n\t" // '1' [04] '0' [04] -#if (w2_nops & 1) - w_nop1 -#endif -#if (w2_nops & 2) - w_nop2 -#endif -#if (w2_nops & 4) - w_nop4 -#endif -#if (w2_nops & 8) - w_nop8 -#endif -#if (w2_nops & 16) - w_nop16 -#endif - " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high -#if (w3_nops & 1) - w_nop1 -#endif -#if (w3_nops & 2) - w_nop2 -#endif -#if (w3_nops & 4) - w_nop4 -#endif -#if (w3_nops & 8) - w_nop8 -#endif -#if (w3_nops & 16) - w_nop16 -#endif - - " dec %0 \n\t" // '1' [+2] '0' [+2] - " brne loop%=\n\t" // '1' [+3] '0' [+4] - : "=&d"(ctr) - : "r"(curbyte), "I"(_SFR_IO_ADDR(PORTx_ADDRESS(RGB_DI_PIN))), "r"(maskhi), "r"(masklo)); - } - - SREG = sreg_prev; -} diff --git a/drivers/avr/ws2812_i2c.c b/drivers/avr/ws2812_i2c.c deleted file mode 100644 index 1c332e24b6..0000000000 --- a/drivers/avr/ws2812_i2c.c +++ /dev/null @@ -1,27 +0,0 @@ -#include "ws2812.h" -#include "i2c_master.h" - -#ifdef RGBW -# error "RGBW not supported" -#endif - -#ifndef WS2812_ADDRESS -# define WS2812_ADDRESS 0xb0 -#endif - -#ifndef WS2812_TIMEOUT -# define WS2812_TIMEOUT 100 -#endif - -void ws2812_init(void) { i2c_init(); } - -// Setleds for standard RGB -void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { - static bool s_init = false; - if (!s_init) { - ws2812_init(); - s_init = true; - } - - i2c_transmit(WS2812_ADDRESS, (uint8_t *)ledarray, sizeof(LED_TYPE) * leds, WS2812_TIMEOUT); -} diff --git a/drivers/chibios/analog.c b/drivers/chibios/analog.c deleted file mode 100644 index 8c476fcac2..0000000000 --- a/drivers/chibios/analog.c +++ /dev/null @@ -1,321 +0,0 @@ -/* Copyright 2019 Drew Mills - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" -#include "analog.h" -#include <ch.h> -#include <hal.h> - -#if !HAL_USE_ADC -# error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC." -#endif - -#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4 -# error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC." -#endif - -#if STM32_ADC_DUAL_MODE -# error "STM32 ADC Dual Mode is not supported at this time." -#endif - -#if STM32_ADCV3_OVERSAMPLING -# error "STM32 ADCV3 Oversampling is not supported at this time." -#endif - -// Otherwise assume V3 -#if defined(STM32F0XX) || defined(STM32L0XX) -# define USE_ADCV1 -#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) -# define USE_ADCV2 -#endif - -// BODGE to make v2 look like v1,3 and 4 -#ifdef USE_ADCV2 -# if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_3) -# define ADC_SMPR_SMP_1P5 ADC_SAMPLE_3 -# define ADC_SMPR_SMP_7P5 ADC_SAMPLE_15 -# define ADC_SMPR_SMP_13P5 ADC_SAMPLE_28 -# define ADC_SMPR_SMP_28P5 ADC_SAMPLE_56 -# define ADC_SMPR_SMP_41P5 ADC_SAMPLE_84 -# define ADC_SMPR_SMP_55P5 ADC_SAMPLE_112 -# define ADC_SMPR_SMP_71P5 ADC_SAMPLE_144 -# define ADC_SMPR_SMP_239P5 ADC_SAMPLE_480 -# endif - -# if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_1P5) -# define ADC_SMPR_SMP_1P5 ADC_SAMPLE_1P5 -# define ADC_SMPR_SMP_7P5 ADC_SAMPLE_7P5 -# define ADC_SMPR_SMP_13P5 ADC_SAMPLE_13P5 -# define ADC_SMPR_SMP_28P5 ADC_SAMPLE_28P5 -# define ADC_SMPR_SMP_41P5 ADC_SAMPLE_41P5 -# define ADC_SMPR_SMP_55P5 ADC_SAMPLE_55P5 -# define ADC_SMPR_SMP_71P5 ADC_SAMPLE_71P5 -# define ADC_SMPR_SMP_239P5 ADC_SAMPLE_239P5 -# endif - -// we still sample at 12bit, but scale down to the requested bit range -# define ADC_CFGR1_RES_12BIT 12 -# define ADC_CFGR1_RES_10BIT 10 -# define ADC_CFGR1_RES_8BIT 8 -# define ADC_CFGR1_RES_6BIT 6 -#endif - -/* User configurable ADC options */ -#ifndef ADC_COUNT -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) -# define ADC_COUNT 1 -# elif defined(STM32F3XX) -# define ADC_COUNT 4 -# else -# error "ADC_COUNT has not been set for this ARM microcontroller." -# endif -#endif - -#ifndef ADC_NUM_CHANNELS -# define ADC_NUM_CHANNELS 1 -#elif ADC_NUM_CHANNELS != 1 -# error "The ARM ADC implementation currently only supports reading one channel at a time." -#endif - -#ifndef ADC_BUFFER_DEPTH -# define ADC_BUFFER_DEPTH 1 -#endif - -// For more sampling rate options, look at hal_adc_lld.h in ChibiOS -#ifndef ADC_SAMPLING_RATE -# define ADC_SAMPLING_RATE ADC_SMPR_SMP_1P5 -#endif - -// Options are 12, 10, 8, and 6 bit. -#ifndef ADC_RESOLUTION -# ifdef ADC_CFGR_RES_10BITS // ADCv3, ADCv4 -# define ADC_RESOLUTION ADC_CFGR_RES_10BITS -# else // ADCv1, ADCv5, or the bodge for ADCv2 above -# define ADC_RESOLUTION ADC_CFGR1_RES_10BIT -# endif -#endif - -static ADCConfig adcCfg = {}; -static adcsample_t sampleBuffer[ADC_NUM_CHANNELS * ADC_BUFFER_DEPTH]; - -// Initialize to max number of ADCs, set to empty object to initialize all to false. -static bool adcInitialized[ADC_COUNT] = {}; - -// TODO: add back TR handling??? -static ADCConversionGroup adcConversionGroup = { - .circular = FALSE, - .num_channels = (uint16_t)(ADC_NUM_CHANNELS), -#if defined(USE_ADCV1) - .cfgr1 = ADC_CFGR1_CONT | ADC_RESOLUTION, - .smpr = ADC_SAMPLING_RATE, -#elif defined(USE_ADCV2) -# if !defined(STM32F1XX) - .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without... -# endif - .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE), - .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE), -#else - .cfgr = ADC_CFGR_CONT | ADC_RESOLUTION, - .smpr = {ADC_SMPR1_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN9(ADC_SAMPLING_RATE), ADC_SMPR2_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN15(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN16(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN17(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN18(ADC_SAMPLING_RATE)}, -#endif -}; - -// clang-format off -__attribute__((weak)) adc_mux pinToMux(pin_t pin) { - switch (pin) { -#if defined(STM32F0XX) - case A0: return TO_MUX( ADC_CHSELR_CHSEL0, 0 ); - case A1: return TO_MUX( ADC_CHSELR_CHSEL1, 0 ); - case A2: return TO_MUX( ADC_CHSELR_CHSEL2, 0 ); - case A3: return TO_MUX( ADC_CHSELR_CHSEL3, 0 ); - case A4: return TO_MUX( ADC_CHSELR_CHSEL4, 0 ); - case A5: return TO_MUX( ADC_CHSELR_CHSEL5, 0 ); - case A6: return TO_MUX( ADC_CHSELR_CHSEL6, 0 ); - case A7: return TO_MUX( ADC_CHSELR_CHSEL7, 0 ); - case B0: return TO_MUX( ADC_CHSELR_CHSEL8, 0 ); - case B1: return TO_MUX( ADC_CHSELR_CHSEL9, 0 ); - case C0: return TO_MUX( ADC_CHSELR_CHSEL10, 0 ); - case C1: return TO_MUX( ADC_CHSELR_CHSEL11, 0 ); - case C2: return TO_MUX( ADC_CHSELR_CHSEL12, 0 ); - case C3: return TO_MUX( ADC_CHSELR_CHSEL13, 0 ); - case C4: return TO_MUX( ADC_CHSELR_CHSEL14, 0 ); - case C5: return TO_MUX( ADC_CHSELR_CHSEL15, 0 ); -#elif defined(STM32F3XX) - case A0: return TO_MUX( ADC_CHANNEL_IN1, 0 ); - case A1: return TO_MUX( ADC_CHANNEL_IN2, 0 ); - case A2: return TO_MUX( ADC_CHANNEL_IN3, 0 ); - case A3: return TO_MUX( ADC_CHANNEL_IN4, 0 ); - case A4: return TO_MUX( ADC_CHANNEL_IN1, 1 ); - case A5: return TO_MUX( ADC_CHANNEL_IN2, 1 ); - case A6: return TO_MUX( ADC_CHANNEL_IN3, 1 ); - case A7: return TO_MUX( ADC_CHANNEL_IN4, 1 ); - case B0: return TO_MUX( ADC_CHANNEL_IN12, 2 ); - case B1: return TO_MUX( ADC_CHANNEL_IN1, 2 ); - case B2: return TO_MUX( ADC_CHANNEL_IN12, 1 ); - case B12: return TO_MUX( ADC_CHANNEL_IN3, 3 ); - case B13: return TO_MUX( ADC_CHANNEL_IN5, 2 ); - case B14: return TO_MUX( ADC_CHANNEL_IN4, 3 ); - case B15: return TO_MUX( ADC_CHANNEL_IN5, 3 ); - case C0: return TO_MUX( ADC_CHANNEL_IN6, 0 ); // Can also be ADC2 - case C1: return TO_MUX( ADC_CHANNEL_IN7, 0 ); // Can also be ADC2 - case C2: return TO_MUX( ADC_CHANNEL_IN8, 0 ); // Can also be ADC2 - case C3: return TO_MUX( ADC_CHANNEL_IN9, 0 ); // Can also be ADC2 - case C4: return TO_MUX( ADC_CHANNEL_IN5, 1 ); - case C5: return TO_MUX( ADC_CHANNEL_IN11, 1 ); - case D8: return TO_MUX( ADC_CHANNEL_IN12, 3 ); - case D9: return TO_MUX( ADC_CHANNEL_IN13, 3 ); - case D10: return TO_MUX( ADC_CHANNEL_IN7, 2 ); // Can also be ADC4 - case D11: return TO_MUX( ADC_CHANNEL_IN8, 2 ); // Can also be ADC4 - case D12: return TO_MUX( ADC_CHANNEL_IN9, 2 ); // Can also be ADC4 - case D13: return TO_MUX( ADC_CHANNEL_IN10, 2 ); // Can also be ADC4 - case D14: return TO_MUX( ADC_CHANNEL_IN11, 2 ); // Can also be ADC4 - case E7: return TO_MUX( ADC_CHANNEL_IN13, 2 ); - case E8: return TO_MUX( ADC_CHANNEL_IN6, 2 ); // Can also be ADC4 - case E9: return TO_MUX( ADC_CHANNEL_IN2, 2 ); - case E10: return TO_MUX( ADC_CHANNEL_IN14, 2 ); - case E11: return TO_MUX( ADC_CHANNEL_IN15, 2 ); - case E12: return TO_MUX( ADC_CHANNEL_IN16, 2 ); - case E13: return TO_MUX( ADC_CHANNEL_IN3, 2 ); - case E14: return TO_MUX( ADC_CHANNEL_IN1, 3 ); - case E15: return TO_MUX( ADC_CHANNEL_IN2, 3 ); - case F2: return TO_MUX( ADC_CHANNEL_IN10, 0 ); // Can also be ADC2 - case F4: return TO_MUX( ADC_CHANNEL_IN5, 0 ); -#elif defined(STM32F4XX) - case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 ); - case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 ); - case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 ); - case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 ); - case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 ); - case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 ); - case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 ); - case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 ); - case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 ); - case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 ); - case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 ); - case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 ); - case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 ); - case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 ); - case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 ); - case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 ); -# if STM32_ADC_USE_ADC3 - case F3: return TO_MUX( ADC_CHANNEL_IN9, 2 ); - case F4: return TO_MUX( ADC_CHANNEL_IN14, 2 ); - case F5: return TO_MUX( ADC_CHANNEL_IN15, 2 ); - case F6: return TO_MUX( ADC_CHANNEL_IN4, 2 ); - case F7: return TO_MUX( ADC_CHANNEL_IN5, 2 ); - case F8: return TO_MUX( ADC_CHANNEL_IN6, 2 ); - case F9: return TO_MUX( ADC_CHANNEL_IN7, 2 ); - case F10: return TO_MUX( ADC_CHANNEL_IN8, 2 ); -# endif -#elif defined(STM32F1XX) - case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 ); - case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 ); - case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 ); - case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 ); - case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 ); - case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 ); - case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 ); - case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 ); - case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 ); - case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 ); - case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 ); - case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 ); - case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 ); - case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 ); - case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 ); - case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 ); - // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the - // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable. -#endif - } - - // return an adc that would never be used so intToADCDriver will bail out - return TO_MUX(0, 0xFF); -} -// clang-format on - -static inline ADCDriver* intToADCDriver(uint8_t adcInt) { - switch (adcInt) { -#if STM32_ADC_USE_ADC1 - case 0: - return &ADCD1; -#endif -#if STM32_ADC_USE_ADC2 - case 1: - return &ADCD2; -#endif -#if STM32_ADC_USE_ADC3 - case 2: - return &ADCD3; -#endif -#if STM32_ADC_USE_ADC4 - case 3: - return &ADCD4; -#endif - } - - return NULL; -} - -static inline void manageAdcInitializationDriver(uint8_t adc, ADCDriver* adcDriver) { - if (!adcInitialized[adc]) { - adcStart(adcDriver, &adcCfg); - adcInitialized[adc] = true; - } -} - -int16_t analogReadPin(pin_t pin) { - palSetLineMode(pin, PAL_MODE_INPUT_ANALOG); - - return adc_read(pinToMux(pin)); -} - -int16_t analogReadPinAdc(pin_t pin, uint8_t adc) { - palSetLineMode(pin, PAL_MODE_INPUT_ANALOG); - - adc_mux target = pinToMux(pin); - target.adc = adc; - return adc_read(target); -} - -int16_t adc_read(adc_mux mux) { -#if defined(USE_ADCV1) - // TODO: fix previous assumption of only 1 input... - adcConversionGroup.chselr = 1 << mux.input; /*no macro to convert N to ADC_CHSELR_CHSEL1*/ -#elif defined(USE_ADCV2) - adcConversionGroup.sqr3 = ADC_SQR3_SQ1_N(mux.input); -#else - adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.input); -#endif - - ADCDriver* targetDriver = intToADCDriver(mux.adc); - if (!targetDriver) { - return 0; - } - - manageAdcInitializationDriver(mux.adc, targetDriver); - if (adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH) != MSG_OK) { - return 0; - } - -#ifdef USE_ADCV2 - // fake 12-bit -> N-bit scale - return (*sampleBuffer) >> (12 - ADC_RESOLUTION); -#else - // already handled as part of adcConvert - return *sampleBuffer; -#endif -} diff --git a/drivers/chibios/analog.h b/drivers/chibios/analog.h deleted file mode 100644 index e61c394265..0000000000 --- a/drivers/chibios/analog.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2019 Drew Mills - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> -#include "quantum.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct { - uint16_t input; - uint8_t adc; -} adc_mux; -#define TO_MUX(i, a) \ - (adc_mux) { i, a } - -int16_t analogReadPin(pin_t pin); -int16_t analogReadPinAdc(pin_t pin, uint8_t adc); -adc_mux pinToMux(pin_t pin); - -int16_t adc_read(adc_mux mux); - -#ifdef __cplusplus -} -#endif diff --git a/drivers/chibios/i2c_master.c b/drivers/chibios/i2c_master.c deleted file mode 100644 index fc4bb2ab37..0000000000 --- a/drivers/chibios/i2c_master.c +++ /dev/null @@ -1,121 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* This library is only valid for STM32 processors. - * This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used - * but using any other I2C pins should be trivial. - */ -#include "quantum.h" -#include "i2c_master.h" -#include <string.h> -#include <hal.h> - -static uint8_t i2c_address; - -static const I2CConfig i2cconfig = { -#if defined(USE_I2CV1_CONTRIB) - I2C1_CLOCK_SPEED, -#elif defined(USE_I2CV1) - I2C1_OPMODE, - I2C1_CLOCK_SPEED, - I2C1_DUTY_CYCLE, -#else - // This configures the I2C clock to 400khz assuming a 72Mhz clock - // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html - STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0 -#endif -}; - -static i2c_status_t chibios_to_qmk(const msg_t* status) { - switch (*status) { - case I2C_NO_ERROR: - return I2C_STATUS_SUCCESS; - case I2C_TIMEOUT: - return I2C_STATUS_TIMEOUT; - // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT - default: - return I2C_STATUS_ERROR; - } -} - -__attribute__((weak)) void i2c_init(void) { - static bool is_initialised = false; - if (!is_initialised) { - is_initialised = true; - - // Try releasing special pins for a short time - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); -#if defined(USE_GPIOV1) - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE); -#else - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -#endif - } -} - -i2c_status_t i2c_start(uint8_t address) { - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - return I2C_STATUS_SUCCESS; -} - -i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_address = address; - i2cStart(&I2C_DRIVER, &i2cconfig); - msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - - uint8_t complete_packet[length + 1]; - for (uint8_t i = 0; i < length; i++) { - complete_packet[i + 1] = data[i]; - } - complete_packet[0] = regaddr; - - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_address = devaddr; - i2cStart(&I2C_DRIVER, &i2cconfig); - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), ®addr, 1, data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -void i2c_stop(void) { i2cStop(&I2C_DRIVER); } diff --git a/drivers/chibios/i2c_master.h b/drivers/chibios/i2c_master.h deleted file mode 100644 index c68109acbd..0000000000 --- a/drivers/chibios/i2c_master.h +++ /dev/null @@ -1,113 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. - */ -#pragma once - -#include <ch.h> -#include <hal.h> - -#ifdef I2C1_BANK -# define I2C1_SCL_BANK I2C1_BANK -# define I2C1_SDA_BANK I2C1_BANK -#endif - -#ifndef I2C1_SCL_BANK -# define I2C1_SCL_BANK GPIOB -#endif - -#ifndef I2C1_SDA_BANK -# define I2C1_SDA_BANK GPIOB -#endif - -#ifndef I2C1_SCL -# define I2C1_SCL 6 -#endif -#ifndef I2C1_SDA -# define I2C1_SDA 7 -#endif - -#ifdef USE_I2CV1 -# ifndef I2C1_OPMODE -# define I2C1_OPMODE OPMODE_I2C -# endif -# ifndef I2C1_CLOCK_SPEED -# define I2C1_CLOCK_SPEED 100000 /* 400000 */ -# endif -# ifndef I2C1_DUTY_CYCLE -# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ -# endif -#else -// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -# ifndef I2C1_TIMINGR_PRESC -# define I2C1_TIMINGR_PRESC 0U -# endif -# ifndef I2C1_TIMINGR_SCLDEL -# define I2C1_TIMINGR_SCLDEL 7U -# endif -# ifndef I2C1_TIMINGR_SDADEL -# define I2C1_TIMINGR_SDADEL 0U -# endif -# ifndef I2C1_TIMINGR_SCLH -# define I2C1_TIMINGR_SCLH 38U -# endif -# ifndef I2C1_TIMINGR_SCLL -# define I2C1_TIMINGR_SCLL 129U -# endif -#endif - -#ifndef I2C_DRIVER -# define I2C_DRIVER I2CD1 -#endif - -#ifdef USE_GPIOV1 -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# endif -#else -// The default PAL alternate modes are used to signal that the pins are used for I2C -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE 4 -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE 4 -# endif -#endif - -typedef int16_t i2c_status_t; - -#define I2C_STATUS_SUCCESS (0) -#define I2C_STATUS_ERROR (-1) -#define I2C_STATUS_TIMEOUT (-2) - -void i2c_init(void); -i2c_status_t i2c_start(uint8_t address); -i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -void i2c_stop(void); diff --git a/drivers/chibios/serial.c b/drivers/chibios/serial.c deleted file mode 100644 index f54fbcee4e..0000000000 --- a/drivers/chibios/serial.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#include "quantum.h" -#include "serial.h" -#include "wait.h" - -#include <hal.h> - -// TODO: resolve/remove build warnings -#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) && defined(PROTOCOL_CHIBIOS) && defined(WS2812_DRIVER_BITBANG) -# warning "RGBLED_SPLIT not supported with bitbang WS2812 driver" -#endif - -// default wait implementation cannot be called within interrupt -// this method seems to be more accurate than GPT timers -#if PORT_SUPPORTS_RT == FALSE -# error "chSysPolledDelayX method not supported on this platform" -#else -# undef wait_us -# define wait_us(x) chSysPolledDelayX(US2RTC(STM32_SYSCLK, x)) -#endif - -#ifndef SELECT_SOFT_SERIAL_SPEED -# define SELECT_SOFT_SERIAL_SPEED 1 -// TODO: correct speeds... -// 0: about 189kbps (Experimental only) -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -// Serial pulse period in microseconds. At the moment, going lower than 12 causes communication failure -#if SELECT_SOFT_SERIAL_SPEED == 0 -# define SERIAL_DELAY 12 -#elif SELECT_SOFT_SERIAL_SPEED == 1 -# define SERIAL_DELAY 16 -#elif SELECT_SOFT_SERIAL_SPEED == 2 -# define SERIAL_DELAY 24 -#elif SELECT_SOFT_SERIAL_SPEED == 3 -# define SERIAL_DELAY 32 -#elif SELECT_SOFT_SERIAL_SPEED == 4 -# define SERIAL_DELAY 48 -#elif SELECT_SOFT_SERIAL_SPEED == 5 -# define SERIAL_DELAY 64 -#else -# error invalid SELECT_SOFT_SERIAL_SPEED value -#endif - -inline static void serial_delay(void) { wait_us(SERIAL_DELAY); } -inline static void serial_delay_half(void) { wait_us(SERIAL_DELAY / 2); } -inline static void serial_delay_blip(void) { wait_us(1); } -inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); } -inline static void serial_input(void) { setPinInputHigh(SOFT_SERIAL_PIN); } -inline static bool serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); } -inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); } -inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); } - -void interrupt_handler(void *arg); - -// Use thread + palWaitLineTimeout instead of palSetLineCallback -// - Methods like setPinOutput and palEnableLineEvent/palDisableLineEvent -// cause the interrupt to lock up, which would limit to only receiving data... -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - palWaitLineTimeout(SOFT_SERIAL_PIN, TIME_INFINITE); - interrupt_handler(NULL); - } -} - -void soft_serial_initiator_init(void) { - serial_output(); - serial_high(); -} - -void soft_serial_target_init(void) { - serial_input(); - - palEnablePadEvent(PAL_PORT(SOFT_SERIAL_PIN), PAL_PAD(SOFT_SERIAL_PIN), PAL_EVENT_MODE_FALLING_EDGE); - chThdCreateStatic(waThread1, sizeof(waThread1), HIGHPRIO, Thread1, NULL); -} - -// Used by the master to synchronize timing with the slave. -static void __attribute__((noinline)) sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()) { - } - - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static void __attribute__((noinline)) sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t __attribute__((noinline)) serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for (uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - } - - return byte; -} - -// Sends a byte with MSB ordering -static void __attribute__((noinline)) serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while (b--) { - if (data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -void interrupt_handler(void *arg) { - chSysLockFromISR(); - - sync_send(); - - // read mid pulses - serial_delay_blip(); - - uint8_t checksum_computed = 0; - int sstd_index = 0; - - sstd_index = serial_read_byte(); - sync_send(); - - split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; - for (int i = 0; i < trans->initiator2target_buffer_size; ++i) { - split_trans_initiator2target_buffer(trans)[i] = serial_read_byte(); - sync_send(); - checksum_computed += split_trans_initiator2target_buffer(trans)[i]; - } - checksum_computed ^= 7; - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // Allow any slave processing to occur - if (trans->slave_callback) { - trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans)); - } - - uint8_t checksum = 0; - for (int i = 0; i < trans->target2initiator_buffer_size; ++i) { - serial_write_byte(split_trans_target2initiator_buffer(trans)[i]); - sync_send(); - serial_delay_half(); - checksum += split_trans_target2initiator_buffer(trans)[i]; - } - serial_write_byte(checksum ^ 7); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - *trans->status = (checksum_computed == checksum_received) ? TRANSACTION_ACCEPTED : TRANSACTION_DATA_ERROR; - - // end transaction - serial_input(); - - // TODO: remove extra delay between transactions - serial_delay(); - - chSysUnlockFromISR(); -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -int soft_serial_transaction(int sstd_index) { - if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR; - split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; - if (!trans->status) return TRANSACTION_TYPE_ERROR; // not registered - - // TODO: remove extra delay between transactions - serial_delay(); - - // this code is very time dependent, so we need to disable interrupts - chSysLock(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - serial_delay_blip(); - - // wait for the slaves response - serial_input(); - serial_high(); - serial_delay(); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - dprintf("serial::NO_RESPONSE\n"); - chSysUnlock(); - return TRANSACTION_NO_RESPONSE; - } - - // if the slave is present syncronize with it - - uint8_t checksum = 0; - // send data to the slave - serial_write_byte(sstd_index); // first chunk is transaction id - sync_recv(); - - for (int i = 0; i < trans->initiator2target_buffer_size; ++i) { - serial_write_byte(split_trans_initiator2target_buffer(trans)[i]); - sync_recv(); - checksum += split_trans_initiator2target_buffer(trans)[i]; - } - serial_write_byte(checksum ^ 7); - sync_recv(); - - serial_delay(); - serial_delay(); // read mid pulses - - // receive data from the slave - uint8_t checksum_computed = 0; - for (int i = 0; i < trans->target2initiator_buffer_size; ++i) { - split_trans_target2initiator_buffer(trans)[i] = serial_read_byte(); - sync_recv(); - checksum_computed += split_trans_target2initiator_buffer(trans)[i]; - } - checksum_computed ^= 7; - uint8_t checksum_received = serial_read_byte(); - - sync_recv(); - serial_delay(); - - if ((checksum_computed) != (checksum_received)) { - dprintf("serial::FAIL[%u,%u,%u]\n", checksum_computed, checksum_received, sstd_index); - serial_output(); - serial_high(); - - chSysUnlock(); - return TRANSACTION_DATA_ERROR; - } - - // always, release the line when not in use - serial_high(); - serial_output(); - - chSysUnlock(); - return TRANSACTION_END; -} diff --git a/drivers/chibios/serial_usart.c b/drivers/chibios/serial_usart.c deleted file mode 100644 index ea4473791c..0000000000 --- a/drivers/chibios/serial_usart.c +++ /dev/null @@ -1,318 +0,0 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "serial_usart.h" - -#if defined(SERIAL_USART_CONFIG) -static SerialConfig serial_config = SERIAL_USART_CONFIG; -#else -static SerialConfig serial_config = { - .speed = (SERIAL_USART_SPEED), /* speed - mandatory */ - .cr1 = (SERIAL_USART_CR1), - .cr2 = (SERIAL_USART_CR2), -# if !defined(SERIAL_USART_FULL_DUPLEX) - .cr3 = ((SERIAL_USART_CR3) | USART_CR3_HDSEL) /* activate half-duplex mode */ -# else - .cr3 = (SERIAL_USART_CR3) -# endif -}; -#endif - -static SerialDriver* serial_driver = &SERIAL_USART_DRIVER; - -static inline bool react_to_transactions(void); -static inline bool __attribute__((nonnull)) receive(uint8_t* destination, const size_t size); -static inline bool __attribute__((nonnull)) send(const uint8_t* source, const size_t size); -static inline int initiate_transaction(uint8_t sstd_index); -static inline void usart_clear(void); - -/** - * @brief Clear the receive input queue. - */ -static inline void usart_clear(void) { - osalSysLock(); - bool volatile queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue); - osalSysUnlock(); - - while (queue_not_empty) { - osalSysLock(); - /* Hard reset the input queue. */ - iqResetI(&serial_driver->iqueue); - osalSysUnlock(); - /* Allow pending interrupts to preempt. - * Do not merge the lock/unlock blocks into one - * or the code will not work properly. - * The empty read adds a tiny amount of delay. */ - (void)queue_not_empty; - osalSysLock(); - queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue); - osalSysUnlock(); - } -} - -/** - * @brief Blocking send of buffer with timeout. - * - * @return true Send success. - * @return false Send failed. - */ -static inline bool send(const uint8_t* source, const size_t size) { - bool success = (size_t)sdWriteTimeout(serial_driver, source, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; - -#if !defined(SERIAL_USART_FULL_DUPLEX) - if (success) { - /* Half duplex fills the input queue with the data we wrote - just throw it away. - Under the right circumstances (e.g. bad cables paired with high baud rates) - less bytes can be present in the input queue, therefore a timeout is needed. */ - uint8_t dump[size]; - return receive(dump, size); - } -#endif - - return success; -} - -/** - * @brief Blocking receive of size * bytes with timeout. - * - * @return true Receive success. - * @return false Receive failed. - */ -static inline bool receive(uint8_t* destination, const size_t size) { - bool success = (size_t)sdReadTimeout(serial_driver, destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; - return success; -} - -#if !defined(SERIAL_USART_FULL_DUPLEX) - -/** - * @brief Initiate pins for USART peripheral. Half-duplex configuration. - */ -__attribute__((weak)) void usart_init(void) { -# if defined(MCU_STM32) -# if defined(USE_GPIOV1) - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); -# else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -# endif - -# if defined(USART_REMAP) - USART_REMAP; -# endif -# else -# pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files." -# endif -} - -#else - -/** - * @brief Initiate pins for USART peripheral. Full-duplex configuration. - */ -__attribute__((weak)) void usart_init(void) { -# if defined(MCU_STM32) -# if defined(USE_GPIOV1) - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT); -# else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); -# endif - -# if defined(USART_REMAP) - USART_REMAP; -# endif -# else -# pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files." -# endif -} - -#endif - -/** - * @brief Overridable master specific initializations. - */ -__attribute__((weak, nonnull)) void usart_master_init(SerialDriver** driver) { - (void)driver; - usart_init(); -} - -/** - * @brief Overridable slave specific initializations. - */ -__attribute__((weak, nonnull)) void usart_slave_init(SerialDriver** driver) { - (void)driver; - usart_init(); -} - -/** - * @brief This thread runs on the slave and responds to transactions initiated - * by the master. - */ -static THD_WORKING_AREA(waSlaveThread, 1024); -static THD_FUNCTION(SlaveThread, arg) { - (void)arg; - chRegSetThreadName("usart_tx_rx"); - - while (true) { - if (!react_to_transactions()) { - /* Clear the receive queue, to start with a clean slate. - * Parts of failed transactions or spurious bytes could still be in it. */ - usart_clear(); - } - } -} - -/** - * @brief Slave specific initializations. - */ -void soft_serial_target_init(void) { - usart_slave_init(&serial_driver); - - sdStart(serial_driver, &serial_config); - - /* Start transport thread. */ - chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL); -} - -/** - * @brief React to transactions started by the master. - */ -static inline bool react_to_transactions(void) { - /* Wait until there is a transaction for us. */ - uint8_t sstd_index = (uint8_t)sdGet(serial_driver); - - /* Sanity check that we are actually responding to a valid transaction. */ - if (sstd_index >= NUM_TOTAL_TRANSACTIONS) { - return false; - } - - split_transaction_desc_t* trans = &split_transaction_table[sstd_index]; - - /* Send back the handshake which is XORed as a simple checksum, - to signal that the slave is ready to receive possible transaction buffers */ - sstd_index ^= HANDSHAKE_MAGIC; - if (!send(&sstd_index, sizeof(sstd_index))) { - *trans->status = TRANSACTION_DATA_ERROR; - return false; - } - - /* Receive transaction buffer from the master. If this transaction requires it.*/ - if (trans->initiator2target_buffer_size) { - if (!receive(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { - *trans->status = TRANSACTION_DATA_ERROR; - return false; - } - } - - /* Allow any slave processing to occur. */ - if (trans->slave_callback) { - trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size, split_trans_target2initiator_buffer(trans)); - } - - /* Send transaction buffer to the master. If this transaction requires it. */ - if (trans->target2initiator_buffer_size) { - if (!send(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { - *trans->status = TRANSACTION_DATA_ERROR; - return false; - } - } - - *trans->status = TRANSACTION_ACCEPTED; - return true; -} - -/** - * @brief Master specific initializations. - */ -void soft_serial_initiator_init(void) { - usart_master_init(&serial_driver); - -#if defined(MCU_STM32) && defined(SERIAL_USART_PIN_SWAP) - serial_config.cr2 |= USART_CR2_SWAP; // master has swapped TX/RX pins -#endif - - sdStart(serial_driver, &serial_config); -} - -/** - * @brief Start transaction from the master half to the slave half. - * - * @param index Transaction Table index of the transaction to start. - * @return int TRANSACTION_NO_RESPONSE in case of Timeout. - * TRANSACTION_TYPE_ERROR in case of invalid transaction index. - * TRANSACTION_END in case of success. - */ -int soft_serial_transaction(int index) { - /* Clear the receive queue, to start with a clean slate. - * Parts of failed transactions or spurious bytes could still be in it. */ - usart_clear(); - return initiate_transaction((uint8_t)index); -} - -/** - * @brief Initiate transaction to slave half. - */ -static inline int initiate_transaction(uint8_t sstd_index) { - /* Sanity check that we are actually starting a valid transaction. */ - if (sstd_index >= NUM_TOTAL_TRANSACTIONS) { - dprintln("USART: Illegal transaction Id."); - return TRANSACTION_TYPE_ERROR; - } - - split_transaction_desc_t* trans = &split_transaction_table[sstd_index]; - - /* Transaction is not registered. Abort. */ - if (!trans->status) { - dprintln("USART: Transaction not registered."); - return TRANSACTION_TYPE_ERROR; - } - - /* Send transaction table index to the slave, which doubles as basic handshake token. */ - if (!send(&sstd_index, sizeof(sstd_index))) { - dprintln("USART: Send Handshake failed."); - return TRANSACTION_TYPE_ERROR; - } - - uint8_t sstd_index_shake = 0xFF; - - /* Which we always read back first so that we can error out correctly. - * - due to the half duplex limitations on return codes, we always have to read *something*. - * - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready. - */ - if (!receive(&sstd_index_shake, sizeof(sstd_index_shake)) || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) { - dprintln("USART: Handshake failed."); - return TRANSACTION_NO_RESPONSE; - } - - /* Send transaction buffer to the slave. If this transaction requires it. */ - if (trans->initiator2target_buffer_size) { - if (!send(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { - dprintln("USART: Send failed."); - return TRANSACTION_NO_RESPONSE; - } - } - - /* Receive transaction buffer from the slave. If this transaction requires it. */ - if (trans->target2initiator_buffer_size) { - if (!receive(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { - dprintln("USART: Receive failed."); - return TRANSACTION_NO_RESPONSE; - } - } - - return TRANSACTION_END; -} diff --git a/drivers/chibios/serial_usart.h b/drivers/chibios/serial_usart.h deleted file mode 100644 index c64e15566f..0000000000 --- a/drivers/chibios/serial_usart.h +++ /dev/null @@ -1,116 +0,0 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "serial.h" -#include "printf.h" - -#include <ch.h> -#include <hal.h> - -#if !defined(SERIAL_USART_DRIVER) -# define SERIAL_USART_DRIVER SD1 -#endif - -#if !defined(USE_GPIOV1) -/* The default PAL alternate modes are used to signal that the pins are used for USART. */ -# if !defined(SERIAL_USART_TX_PAL_MODE) -# define SERIAL_USART_TX_PAL_MODE 7 -# endif -# if !defined(SERIAL_USART_RX_PAL_MODE) -# define SERIAL_USART_RX_PAL_MODE 7 -# endif -#endif - -#if defined(SOFT_SERIAL_PIN) -# define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN -#endif - -#if !defined(SERIAL_USART_TX_PIN) -# define SERIAL_USART_TX_PIN A9 -#endif - -#if !defined(SERIAL_USART_RX_PIN) -# define SERIAL_USART_RX_PIN A10 -#endif - -#if !defined(USART_CR1_M0) -# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so -#endif - -#if !defined(SERIAL_USART_CR1) -# define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length -#endif - -#if !defined(SERIAL_USART_CR2) -# define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits -#endif - -#if !defined(SERIAL_USART_CR3) -# define SERIAL_USART_CR3 0 -#endif - -#if defined(USART1_REMAP) -# define USART_REMAP \ - do { \ - (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); \ - } while (0) -#elif defined(USART2_REMAP) -# define USART_REMAP \ - do { \ - (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); \ - } while (0) -#elif defined(USART3_PARTIALREMAP) -# define USART_REMAP \ - do { \ - (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \ - } while (0) -#elif defined(USART3_FULLREMAP) -# define USART_REMAP \ - do { \ - (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \ - } while (0) -#endif - -#if !defined(SELECT_SOFT_SERIAL_SPEED) -# define SELECT_SOFT_SERIAL_SPEED 1 -#endif - -#if defined(SERIAL_USART_SPEED) -// Allow advanced users to directly set SERIAL_USART_SPEED -#elif SELECT_SOFT_SERIAL_SPEED == 0 -# define SERIAL_USART_SPEED 460800 -#elif SELECT_SOFT_SERIAL_SPEED == 1 -# define SERIAL_USART_SPEED 230400 -#elif SELECT_SOFT_SERIAL_SPEED == 2 -# define SERIAL_USART_SPEED 115200 -#elif SELECT_SOFT_SERIAL_SPEED == 3 -# define SERIAL_USART_SPEED 57600 -#elif SELECT_SOFT_SERIAL_SPEED == 4 -# define SERIAL_USART_SPEED 38400 -#elif SELECT_SOFT_SERIAL_SPEED == 5 -# define SERIAL_USART_SPEED 19200 -#else -# error invalid SELECT_SOFT_SERIAL_SPEED value -#endif - -#if !defined(SERIAL_USART_TIMEOUT) -# define SERIAL_USART_TIMEOUT 100 -#endif - -#define HANDSHAKE_MAGIC 7 diff --git a/drivers/chibios/spi_master.c b/drivers/chibios/spi_master.c deleted file mode 100644 index 28ddcbb2ba..0000000000 --- a/drivers/chibios/spi_master.c +++ /dev/null @@ -1,202 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#include "spi_master.h" - -#include "timer.h" - -static pin_t currentSlavePin = NO_PIN; - -#if defined(K20x) || defined(KL2x) -static SPIConfig spiConfig = {NULL, 0, 0, 0}; -#else -static SPIConfig spiConfig = {false, NULL, 0, 0, 0, 0}; -#endif - -__attribute__((weak)) void spi_init(void) { - static bool is_initialised = false; - if (!is_initialised) { - is_initialised = true; - - // Try releasing special pins for a short time - setPinInput(SPI_SCK_PIN); - setPinInput(SPI_MOSI_PIN); - setPinInput(SPI_MISO_PIN); - - chThdSleepMilliseconds(10); -#if defined(USE_GPIOV1) - palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), SPI_SCK_PAL_MODE); - palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_PAL_MODE); - palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_PAL_MODE); -#else - palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); -#endif - } -} - -bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { - if (currentSlavePin != NO_PIN || slavePin == NO_PIN) { - return false; - } - - uint16_t roundedDivisor = 2; - while (roundedDivisor < divisor) { - roundedDivisor <<= 1; - } - - if (roundedDivisor < 2 || roundedDivisor > 256) { - return false; - } - -#if defined(K20x) || defined(KL2x) - spiConfig.tar0 = SPIx_CTARn_FMSZ(7) | SPIx_CTARn_ASC(1); - - if (lsbFirst) { - spiConfig.tar0 |= SPIx_CTARn_LSBFE; - } - - switch (mode) { - case 0: - break; - case 1: - spiConfig.tar0 |= SPIx_CTARn_CPHA; - break; - case 2: - spiConfig.tar0 |= SPIx_CTARn_CPOL; - break; - case 3: - spiConfig.tar0 |= SPIx_CTARn_CPHA | SPIx_CTARn_CPOL; - break; - } - - switch (roundedDivisor) { - case 2: - spiConfig.tar0 |= SPIx_CTARn_BR(0); - break; - case 4: - spiConfig.tar0 |= SPIx_CTARn_BR(1); - break; - case 8: - spiConfig.tar0 |= SPIx_CTARn_BR(3); - break; - case 16: - spiConfig.tar0 |= SPIx_CTARn_BR(4); - break; - case 32: - spiConfig.tar0 |= SPIx_CTARn_BR(5); - break; - case 64: - spiConfig.tar0 |= SPIx_CTARn_BR(6); - break; - case 128: - spiConfig.tar0 |= SPIx_CTARn_BR(7); - break; - case 256: - spiConfig.tar0 |= SPIx_CTARn_BR(8); - break; - } -#else - spiConfig.cr1 = 0; - - if (lsbFirst) { - spiConfig.cr1 |= SPI_CR1_LSBFIRST; - } - - switch (mode) { - case 0: - break; - case 1: - spiConfig.cr1 |= SPI_CR1_CPHA; - break; - case 2: - spiConfig.cr1 |= SPI_CR1_CPOL; - break; - case 3: - spiConfig.cr1 |= SPI_CR1_CPHA | SPI_CR1_CPOL; - break; - } - - switch (roundedDivisor) { - case 2: - break; - case 4: - spiConfig.cr1 |= SPI_CR1_BR_0; - break; - case 8: - spiConfig.cr1 |= SPI_CR1_BR_1; - break; - case 16: - spiConfig.cr1 |= SPI_CR1_BR_1 | SPI_CR1_BR_0; - break; - case 32: - spiConfig.cr1 |= SPI_CR1_BR_2; - break; - case 64: - spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_0; - break; - case 128: - spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1; - break; - case 256: - spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0; - break; - } -#endif - - currentSlavePin = slavePin; - spiConfig.ssport = PAL_PORT(slavePin); - spiConfig.sspad = PAL_PAD(slavePin); - - setPinOutput(slavePin); - spiStart(&SPI_DRIVER, &spiConfig); - spiSelect(&SPI_DRIVER); - - return true; -} - -spi_status_t spi_write(uint8_t data) { - uint8_t rxData; - spiExchange(&SPI_DRIVER, 1, &data, &rxData); - - return rxData; -} - -spi_status_t spi_read(void) { - uint8_t data = 0; - spiReceive(&SPI_DRIVER, 1, &data); - - return data; -} - -spi_status_t spi_transmit(const uint8_t *data, uint16_t length) { - spiSend(&SPI_DRIVER, length, data); - return SPI_STATUS_SUCCESS; -} - -spi_status_t spi_receive(uint8_t *data, uint16_t length) { - spiReceive(&SPI_DRIVER, length, data); - return SPI_STATUS_SUCCESS; -} - -void spi_stop(void) { - if (currentSlavePin != NO_PIN) { - spiUnselect(&SPI_DRIVER); - spiStop(&SPI_DRIVER); - currentSlavePin = NO_PIN; - } -} diff --git a/drivers/chibios/spi_master.h b/drivers/chibios/spi_master.h deleted file mode 100644 index b5a6ef1437..0000000000 --- a/drivers/chibios/spi_master.h +++ /dev/null @@ -1,93 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <ch.h> -#include <hal.h> -#include <stdbool.h> - -#include "gpio.h" -#include "chibios_config.h" - -#ifndef SPI_DRIVER -# define SPI_DRIVER SPID2 -#endif - -#ifndef SPI_SCK_PIN -# define SPI_SCK_PIN B13 -#endif - -#ifndef SPI_SCK_PAL_MODE -# if defined(USE_GPIOV1) -# define SPI_SCK_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -# else -# define SPI_SCK_PAL_MODE 5 -# endif -#endif - -#ifndef SPI_MOSI_PIN -# define SPI_MOSI_PIN B15 -#endif - -#ifndef SPI_MOSI_PAL_MODE -# if defined(USE_GPIOV1) -# define SPI_MOSI_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -# else -# define SPI_MOSI_PAL_MODE 5 -# endif -#endif - -#ifndef SPI_MISO_PIN -# define SPI_MISO_PIN B14 -#endif - -#ifndef SPI_MISO_PAL_MODE -# if defined(USE_GPIOV1) -# define SPI_MISO_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -# else -# define SPI_MISO_PAL_MODE 5 -# endif -#endif - -typedef int16_t spi_status_t; - -#define SPI_STATUS_SUCCESS (0) -#define SPI_STATUS_ERROR (-1) -#define SPI_STATUS_TIMEOUT (-2) - -#define SPI_TIMEOUT_IMMEDIATE (0) -#define SPI_TIMEOUT_INFINITE (0xFFFF) - -#ifdef __cplusplus -extern "C" { -#endif -void spi_init(void); - -bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor); - -spi_status_t spi_write(uint8_t data); - -spi_status_t spi_read(void); - -spi_status_t spi_transmit(const uint8_t *data, uint16_t length); - -spi_status_t spi_receive(uint8_t *data, uint16_t length); - -void spi_stop(void); -#ifdef __cplusplus -} -#endif diff --git a/drivers/chibios/uart.c b/drivers/chibios/uart.c deleted file mode 100644 index 030335b342..0000000000 --- a/drivers/chibios/uart.c +++ /dev/null @@ -1,50 +0,0 @@ -/* Copyright 2021 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#include "uart.h" - -#include "quantum.h" - -static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3}; - -void uart_init(uint32_t baud) { - static bool is_initialised = false; - - if (!is_initialised) { - is_initialised = true; - - serialConfig.speed = baud; - -#if defined(USE_GPIOV1) - palSetLineMode(SD1_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); - palSetLineMode(SD1_RX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); -#else - palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -#endif - sdStart(&SERIAL_DRIVER, &serialConfig); - } -} - -void uart_putchar(uint8_t c) { sdPut(&SERIAL_DRIVER, c); } - -uint8_t uart_getchar(void) { - msg_t res = sdGet(&SERIAL_DRIVER); - - return (uint8_t)res; -} - -bool uart_available(void) { return !sdGetWouldBlock(&SERIAL_DRIVER); } diff --git a/drivers/chibios/uart.h b/drivers/chibios/uart.h deleted file mode 100644 index b4e20e9fd3..0000000000 --- a/drivers/chibios/uart.h +++ /dev/null @@ -1,77 +0,0 @@ -/* Copyright 2021 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> - -#include <hal.h> - -#ifndef SERIAL_DRIVER -# define SERIAL_DRIVER SD1 -#endif - -#ifndef SD1_TX_PIN -# define SD1_TX_PIN A9 -#endif - -#ifndef SD1_TX_PAL_MODE -# define SD1_TX_PAL_MODE 7 -#endif - -#ifndef SD1_RX_PIN -# define SD1_RX_PIN A10 -#endif - -#ifndef SD1_RX_PAL_MODE -# define SD1_RX_PAL_MODE 7 -#endif - -#ifndef SD1_CTS_PIN -# define SD1_CTS_PIN A11 -#endif - -#ifndef SD1_CTS_PAL_MODE -# define SD1_CTS_PAL_MODE 7 -#endif - -#ifndef SD1_RTS_PIN -# define SD1_RTS_PIN A12 -#endif - -#ifndef SD1_RTS_PAL_MODE -# define SD1_RTS_PAL_MODE 7 -#endif - -#ifndef SD1_CR1 -# define SD1_CR1 0 -#endif - -#ifndef SD1_CR2 -# define SD1_CR2 0 -#endif - -#ifndef SD1_CR3 -# define SD1_CR3 0 -#endif - -void uart_init(uint32_t baud); - -void uart_putchar(uint8_t c); - -uint8_t uart_getchar(void); - -bool uart_available(void); diff --git a/drivers/chibios/usbpd_stm32g4.c b/drivers/chibios/usbpd_stm32g4.c deleted file mode 100644 index f16ca8aeae..0000000000 --- a/drivers/chibios/usbpd_stm32g4.c +++ /dev/null @@ -1,76 +0,0 @@ -/* Copyright 2021 Nick Brassel (@tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <quantum.h> - -#ifndef USBPD_UCPD1_CFG1 -# define USBPD_UCPD1_CFG1 (UCPD_CFG1_PSC_UCPDCLK_0 | UCPD_CFG1_TRANSWIN_3 | UCPD_CFG1_IFRGAP_4 | UCPD_CFG1_HBITCLKDIV_4) -#endif // USBPD_UCPD1_CFG1 - -// Initialises the USBPD subsystem -__attribute__((weak)) void usbpd_init(void) { - // Disable dead-battery signals - PWR->CR3 |= PWR_CR3_UCPD_DBDIS; - // Enable the clock for the UCPD1 peripheral - RCC->APB1ENR2 |= RCC_APB1ENR2_UCPD1EN; - - // Copy the existing value - uint32_t CFG1 = UCPD1->CFG1; - // Force-disable UCPD1 before configuring - CFG1 &= ~UCPD_CFG1_UCPDEN; - // Configure UCPD1 - CFG1 = USBPD_UCPD1_CFG1; - // Apply the changes - UCPD1->CFG1 = CFG1; - // Enable UCPD1 - UCPD1->CFG1 |= UCPD_CFG1_UCPDEN; - - // Copy the existing value - uint32_t CR = UCPD1->CR; - // Clear out ANASUBMODE (irrelevant as a sink device) - CR &= ~UCPD_CR_ANASUBMODE_Msk; - // Advertise our capabilities as a sink, with both CC lines enabled - CR |= UCPD_CR_ANAMODE | UCPD_CR_CCENABLE_Msk; - // Apply the changes - UCPD1->CR = CR; -} - -// Gets the current state of the USBPD allowance -__attribute__((weak)) usbpd_allowance_t usbpd_get_allowance(void) { - uint32_t CR = UCPD1->CR; - - int ucpd_enabled = (UCPD1->CFG1 & UCPD_CFG1_UCPDEN_Msk) >> UCPD_CFG1_UCPDEN_Pos; - int anamode = (CR & UCPD_CR_ANAMODE_Msk) >> UCPD_CR_ANAMODE_Pos; - int cc_enabled = (CR & UCPD_CR_CCENABLE_Msk) >> UCPD_CR_CCENABLE_Pos; - - if (ucpd_enabled && anamode && cc_enabled) { - uint32_t SR = UCPD1->SR; - int vstate_cc1 = (SR & UCPD_SR_TYPEC_VSTATE_CC1_Msk) >> UCPD_SR_TYPEC_VSTATE_CC1_Pos; - int vstate_cc2 = (SR & UCPD_SR_TYPEC_VSTATE_CC2_Msk) >> UCPD_SR_TYPEC_VSTATE_CC2_Pos; - int vstate_max = vstate_cc1 > vstate_cc2 ? vstate_cc1 : vstate_cc2; - switch (vstate_max) { - case 0: - case 1: - return USBPD_500MA; // Note that this is 500mA (i.e. max USB 2.0), not 900mA, as we're not using USB 3.1 as a sink device. - case 2: - return USBPD_1500MA; - case 3: - return USBPD_3000MA; - } - } - - return USBPD_500MA; -}
\ No newline at end of file diff --git a/drivers/chibios/ws2812.c b/drivers/chibios/ws2812.c deleted file mode 100644 index 0d12e2fb79..0000000000 --- a/drivers/chibios/ws2812.c +++ /dev/null @@ -1,114 +0,0 @@ -#include "quantum.h" -#include "ws2812.h" -#include <ch.h> -#include <hal.h> - -/* Adapted from https://github.com/bigjosh/SimpleNeoPixelDemo/ */ - -#ifndef NOP_FUDGE -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) -# define NOP_FUDGE 0.4 -# else -# error("NOP_FUDGE configuration required") -# define NOP_FUDGE 1 // this just pleases the compile so the above error is easier to spot -# endif -#endif - -// Push Pull or Open Drain Configuration -// Default Push Pull -#ifndef WS2812_EXTERNAL_PULLUP -# define WS2812_OUTPUT_MODE PAL_MODE_OUTPUT_PUSHPULL -#else -# define WS2812_OUTPUT_MODE PAL_MODE_OUTPUT_OPENDRAIN -#endif - -#define NUMBER_NOPS 6 -#define CYCLES_PER_SEC (STM32_SYSCLK / NUMBER_NOPS * NOP_FUDGE) -#define NS_PER_SEC (1000000000L) // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) - -#define wait_ns(x) \ - do { \ - for (int i = 0; i < NS_TO_CYCLES(x); i++) { \ - __asm__ volatile("nop\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "nop\n\t"); \ - } \ - } while (0) - -// These are the timing constraints taken mostly from the WS2812 datasheets -// These are chosen to be conservative and avoid problems rather than for maximum throughput - -#define T1H 900 // Width of a 1 bit in ns -#define T1L (1250 - T1H) // Width of a 1 bit in ns - -#define T0H 350 // Width of a 0 bit in ns -#define T0L (1250 - T0H) // Width of a 0 bit in ns - -// The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased -// to values like 600000 ns. If it is too small, the pixels will show nothing most of the time. -#define RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch - -void sendByte(uint8_t byte) { - // WS2812 protocol wants most significant bits first - for (unsigned char bit = 0; bit < 8; bit++) { - bool is_one = byte & (1 << (7 - bit)); - // using something like wait_ns(is_one ? T1L : T0L) here throws off timings - if (is_one) { - // 1 - writePinHigh(RGB_DI_PIN); - wait_ns(T1H); - writePinLow(RGB_DI_PIN); - wait_ns(T1L); - } else { - // 0 - writePinHigh(RGB_DI_PIN); - wait_ns(T0H); - writePinLow(RGB_DI_PIN); - wait_ns(T0L); - } - } -} - -void ws2812_init(void) { palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); } - -// Setleds for standard RGB -void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { - static bool s_init = false; - if (!s_init) { - ws2812_init(); - s_init = true; - } - - // this code is very time dependent, so we need to disable interrupts - chSysLock(); - - for (uint8_t i = 0; i < leds; i++) { - // WS2812 protocol dictates grb order -#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) - sendByte(ledarray[i].g); - sendByte(ledarray[i].r); - sendByte(ledarray[i].b); -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB) - sendByte(ledarray[i].r); - sendByte(ledarray[i].g); - sendByte(ledarray[i].b); -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR) - sendByte(ledarray[i].b); - sendByte(ledarray[i].g); - sendByte(ledarray[i].r); -#endif - -#ifdef RGBW - sendByte(ledarray[i].w); -#endif - } - - wait_ns(RES); - - chSysUnlock(); -} diff --git a/drivers/chibios/ws2812_pwm.c b/drivers/chibios/ws2812_pwm.c deleted file mode 100644 index e6af55b6b3..0000000000 --- a/drivers/chibios/ws2812_pwm.c +++ /dev/null @@ -1,311 +0,0 @@ -#include "ws2812.h" -#include "quantum.h" -#include <hal.h> - -/* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */ - -#ifdef RGBW -# error "RGBW not supported" -#endif - -#ifndef WS2812_PWM_DRIVER -# define WS2812_PWM_DRIVER PWMD2 // TIMx -#endif -#ifndef WS2812_PWM_CHANNEL -# define WS2812_PWM_CHANNEL 2 // Channel -#endif -#ifndef WS2812_PWM_PAL_MODE -# define WS2812_PWM_PAL_MODE 2 // DI Pin's alternate function value -#endif -#ifndef WS2812_DMA_STREAM -# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP -#endif -#ifndef WS2812_DMA_CHANNEL -# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP -#endif -#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID) -# error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP" -#endif - -#ifndef WS2812_PWM_COMPLEMENTARY_OUTPUT -# define WS2812_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH -#else -# if !STM32_PWM_USE_ADVANCED -# error "WS2812_PWM_COMPLEMENTARY_OUTPUT requires STM32_PWM_USE_ADVANCED == TRUE" -# endif -# define WS2812_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH -#endif - -// Push Pull or Open Drain Configuration -// Default Push Pull -#ifndef WS2812_EXTERNAL_PULLUP -# if defined(USE_GPIOV1) -# define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -# else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING -# endif -#else -# if defined(USE_GPIOV1) -# define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING -# endif -#endif - -#ifndef WS2812_PWM_TARGET_PERIOD -//# define WS2812_PWM_TARGET_PERIOD 800000 // Original code is 800k...? -# define WS2812_PWM_TARGET_PERIOD 80000 // TODO: work out why 10x less on f303/f4x1 -#endif - -/* --- PRIVATE CONSTANTS ---------------------------------------------------- */ - -#define WS2812_PWM_FREQUENCY (STM32_SYSCLK / 2) /**< Clock frequency of PWM, must be valid with respect to system clock! */ -#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY / WS2812_PWM_TARGET_PERIOD) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */ - -/** - * @brief Number of bit-periods to hold the data line low at the end of a frame - * - * The reset period for each frame is defined in WS2812_TRST_US. - * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit: - */ -#define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250) -#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24) /**< Number of data bits */ -#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ - -/** - * @brief High period for a zero, in ticks - * - * Per the datasheet: - * WS2812: - * - T0H: 200 nS to 500 nS, inclusive - * - T0L: 650 nS to 950 nS, inclusive - * WS2812B: - * - T0H: 200 nS to 500 nS, inclusive - * - T0L: 750 nS to 1050 nS, inclusive - * - * The duty cycle is calculated for a high period of 350 nS. - */ -#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY / (1000000000 / 350)) - -/** - * @brief High period for a one, in ticks - * - * Per the datasheet: - * WS2812: - * - T1H: 550 nS to 850 nS, inclusive - * - T1L: 450 nS to 750 nS, inclusive - * WS2812B: - * - T1H: 750 nS to 1050 nS, inclusive - * - T1L: 200 nS to 500 nS, inclusive - * - * The duty cycle is calculated for a high period of 800 nS. - * This is in the middle of the specifications of the WS2812 and WS2812B. - */ -#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY / (1000000000 / 800)) - -/* --- PRIVATE MACROS ------------------------------------------------------- */ - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] byte: The byte number [0, 2] - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -#define WS2812_BIT(led, byte, bit) (24 * (led) + 8 * (byte) + (7 - (bit))) - -#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit - * - * @note The red byte is the middle byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit - * - * @note The red byte is the first byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit - * - * @note The red byte is the last byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit index [0, 7] - * - * @return The bit index - */ -# define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit)) - -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB) -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit - * - * @note The red byte is the middle byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 0, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit - * - * @note The red byte is the first byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 1, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit - * - * @note The red byte is the last byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit index [0, 7] - * - * @return The bit index - */ -# define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit)) - -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR) -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit - * - * @note The red byte is the middle byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 2, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit - * - * @note The red byte is the first byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit number [0, 7] - * - * @return The bit index - */ -# define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 1, (bit)) - -/** - * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit - * - * @note The red byte is the last byte in the color packet - * - * @param[in] led: The led index [0, @ref RGBLED_NUM) - * @param[in] bit: The bit index [0, 7] - * - * @return The bit index - */ -# define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 0, (bit)) -#endif - -/* --- PRIVATE VARIABLES ---------------------------------------------------- */ - -static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */ - -/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */ -/* - * Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for -the memory (while the DMA is reading/writing from/to a buffer, the application can -write/read to/from the other buffer). - */ - -void ws2812_init(void) { - // Initialize led frame buffer - uint32_t i; - for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle - for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero - - palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); - - // PWM Configuration - //#pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config - static const PWMConfig ws2812_pwm_config = { - .frequency = WS2812_PWM_FREQUENCY, - .period = WS2812_PWM_PERIOD, // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben - .callback = NULL, - .channels = - { - [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled - [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL}, // Turn on the channel we care about - }, - .cr2 = 0, - .dier = TIM_DIER_UDE, // DMA on update event for next period - }; - //#pragma GCC diagnostic pop // Restore command-line warning options - - // Configure DMA - // dmaInit(); // Joe added this - dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA_STREAM(0), 10, NULL, NULL); - dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1])); // Ziel ist der An-Zeit im Cap-Comp-Register - dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer); - dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N); - dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3)); - // M2P: Memory 2 Periph; PL: Priority Level - -#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) - // If the MCU has a DMAMUX we need to assign the correct resource - dmaSetRequestSource(WS2812_DMA_STREAM, WS2812_DMAMUX_ID); -#endif - - // Start DMA - dmaStreamEnable(WS2812_DMA_STREAM); - - // Configure PWM - // NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the - // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer, - // disable counting, enable the channel, and then make whatever configuration changes we need. - pwmStart(&WS2812_PWM_DRIVER, &ws2812_pwm_config); - pwmEnableChannel(&WS2812_PWM_DRIVER, WS2812_PWM_CHANNEL - 1, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in -} - -void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) { - // Write color to frame buffer - for (uint8_t bit = 0; bit < 8; bit++) { - ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; - ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; - ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; - } -} - -// Setleds for standard RGB -void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { - static bool s_init = false; - if (!s_init) { - ws2812_init(); - s_init = true; - } - - for (uint16_t i = 0; i < leds; i++) { - ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b); - } -} diff --git a/drivers/chibios/ws2812_spi.c b/drivers/chibios/ws2812_spi.c deleted file mode 100644 index 377a929b94..0000000000 --- a/drivers/chibios/ws2812_spi.c +++ /dev/null @@ -1,159 +0,0 @@ -#include "quantum.h" -#include "ws2812.h" - -/* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */ - -#ifdef RGBW -# error "RGBW not supported" -#endif - -// Define the spi your LEDs are plugged to here -#ifndef WS2812_SPI -# define WS2812_SPI SPID1 -#endif - -#ifndef WS2812_SPI_MOSI_PAL_MODE -# define WS2812_SPI_MOSI_PAL_MODE 5 -#endif - -#ifndef WS2812_SPI_SCK_PAL_MODE -# define WS2812_SPI_SCK_PAL_MODE 5 -#endif - -// Push Pull or Open Drain Configuration -// Default Push Pull -#ifndef WS2812_EXTERNAL_PULLUP -# if defined(USE_GPIOV1) -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -# else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL -# endif -#else -# if defined(USE_GPIOV1) -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN -# endif -#endif - -// Define SPI config speed -// baudrate should target 3.2MHz -// F072 fpclk = 48MHz -// 48/16 = 3Mhz -#if WS2812_SPI_DIVISOR == 2 -# define WS2812_SPI_DIVISOR (0) -#elif WS2812_SPI_DIVISOR == 4 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_0) -#elif WS2812_SPI_DIVISOR == 8 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1) -#elif WS2812_SPI_DIVISOR == 16 // same as default -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) -#elif WS2812_SPI_DIVISOR == 32 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2) -#elif WS2812_SPI_DIVISOR == 64 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_0) -#elif WS2812_SPI_DIVISOR == 128 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1) -#elif WS2812_SPI_DIVISOR == 256 -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) -#else -# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) // default -#endif - -// Use SPI circular buffer -#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER -# define WS2812_SPI_BUFFER_MODE 1 // circular buffer -#else -# define WS2812_SPI_BUFFER_MODE 0 // normal buffer -#endif - -#if defined(USE_GPIOV1) -# define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL -#else -# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL -#endif - -#define BYTES_FOR_LED_BYTE 4 -#define NB_COLORS 3 -#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS) -#define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM) -#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250)) -#define PREAMBLE_SIZE 4 - -static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE] = {0}; - -/* - * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to - * the ws2812b protocol, we use this helper function to translate bytes into - * 0s and 1s for the LED (with the appropriate timing). - */ -static uint8_t get_protocol_eq(uint8_t data, int pos) { - uint8_t eq = 0; - if (data & (1 << (2 * (3 - pos)))) - eq = 0b1110; - else - eq = 0b1000; - if (data & (2 << (2 * (3 - pos)))) - eq += 0b11100000; - else - eq += 0b10000000; - return eq; -} - -static void set_led_color_rgb(LED_TYPE color, int pos) { - uint8_t* tx_start = &txbuf[PREAMBLE_SIZE]; - -#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.g, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.r, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j); -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB) - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.r, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j); -#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR) - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.b, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j); - for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j); -#endif -} - -void ws2812_init(void) { - palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE); - -#ifdef WS2812_SPI_SCK_PIN - palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE); -#endif // WS2812_SPI_SCK_PIN - - // TODO: more dynamic baudrate - static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR}; - - spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */ - spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ - spiSelect(&WS2812_SPI); /* Slave Select assertion. */ -#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER - spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); -#endif -} - -void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { - static bool s_init = false; - if (!s_init) { - ws2812_init(); - s_init = true; - } - - for (uint8_t i = 0; i < leds; i++) { - set_led_color_rgb(ledarray[i], i); - } - - // Send async - each led takes ~0.03ms, 50 leds ~1.5ms, animations flushing faster than send will cause issues. - // Instead spiSend can be used to send synchronously (or the thread logic can be added back). -#ifndef WS2812_SPI_USE_CIRCULAR_BUFFER -# ifdef WS2812_SPI_SYNC - spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); -# else - spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); -# endif -#endif -} diff --git a/drivers/eeprom/eeprom_stm32_L0_L1.c b/drivers/eeprom/eeprom_stm32_L0_L1.c deleted file mode 100644 index ed26cc7145..0000000000 --- a/drivers/eeprom/eeprom_stm32_L0_L1.c +++ /dev/null @@ -1,96 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdint.h> -#include <string.h> - -#include <hal.h> -#include "eeprom_driver.h" -#include "eeprom_stm32_L0_L1.h" - -#define EEPROM_BASE_ADDR 0x08080000 -#define EEPROM_ADDR(offset) (EEPROM_BASE_ADDR + (offset)) -#define EEPROM_PTR(offset) ((__IO uint8_t *)EEPROM_ADDR(offset)) -#define EEPROM_BYTE(location, offset) (*(EEPROM_PTR(((uint32_t)location) + ((uint32_t)offset)))) - -#define BUFFER_BYTE(buffer, offset) (*(((uint8_t *)buffer) + offset)) - -#define FLASH_PEKEY1 0x89ABCDEF -#define FLASH_PEKEY2 0x02030405 - -static inline void STM32_L0_L1_EEPROM_WaitNotBusy(void) { - while (FLASH->SR & FLASH_SR_BSY) { - __WFI(); - } -} - -static inline void STM32_L0_L1_EEPROM_Unlock(void) { - STM32_L0_L1_EEPROM_WaitNotBusy(); - if (FLASH->PECR & FLASH_PECR_PELOCK) { - FLASH->PEKEYR = FLASH_PEKEY1; - FLASH->PEKEYR = FLASH_PEKEY2; - } -} - -static inline void STM32_L0_L1_EEPROM_Lock(void) { - STM32_L0_L1_EEPROM_WaitNotBusy(); - FLASH->PECR |= FLASH_PECR_PELOCK; -} - -void eeprom_driver_init(void) {} - -void eeprom_driver_erase(void) { - STM32_L0_L1_EEPROM_Unlock(); - - for (size_t offset = 0; offset < STM32_ONBOARD_EEPROM_SIZE; offset += sizeof(uint32_t)) { - FLASH->PECR |= FLASH_PECR_ERASE | FLASH_PECR_DATA; - - *(__IO uint32_t *)EEPROM_ADDR(offset) = (uint32_t)0; - - STM32_L0_L1_EEPROM_WaitNotBusy(); - FLASH->PECR &= ~(FLASH_PECR_ERASE | FLASH_PECR_DATA); - } - - STM32_L0_L1_EEPROM_Lock(); -} - -void eeprom_read_block(void *buf, const void *addr, size_t len) { - for (size_t offset = 0; offset < len; ++offset) { - // Drop out if we've hit the limit of the EEPROM - if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) { - break; - } - - STM32_L0_L1_EEPROM_WaitNotBusy(); - BUFFER_BYTE(buf, offset) = EEPROM_BYTE(addr, offset); - } -} - -void eeprom_write_block(const void *buf, void *addr, size_t len) { - STM32_L0_L1_EEPROM_Unlock(); - - for (size_t offset = 0; offset < len; ++offset) { - // Drop out if we've hit the limit of the EEPROM - if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) { - break; - } - - STM32_L0_L1_EEPROM_WaitNotBusy(); - EEPROM_BYTE(addr, offset) = BUFFER_BYTE(buf, offset); - } - - STM32_L0_L1_EEPROM_Lock(); -} diff --git a/drivers/eeprom/eeprom_stm32_L0_L1.h b/drivers/eeprom/eeprom_stm32_L0_L1.h deleted file mode 100644 index a35defca8b..0000000000 --- a/drivers/eeprom/eeprom_stm32_L0_L1.h +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -/* - The size used by the STM32 L0/L1 EEPROM driver. -*/ -#ifndef STM32_ONBOARD_EEPROM_SIZE -# ifdef VIA_ENABLE -# define STM32_ONBOARD_EEPROM_SIZE 1024 -# else -# include "eeconfig.h" -# define STM32_ONBOARD_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO and EEPROM page sizing -# endif -#endif - -#if STM32_ONBOARD_EEPROM_SIZE > 128 -# pragma message("Please note: resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.") -#endif |