Optimize matrix scanning (#343)

1 files changed, 9 insertions, 8 deletions

diff --git a/keyboard/gh60_rev_c/config.h b/keyboard/gh60_rev_c/config.h
index 2fd8f57439..827c08d1be 100644
--- a/keyboard/gh60_rev_c/config.h
+++ b/keyboard/gh60_rev_c/config.h
@@ -41,15 +41,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

  *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

  *

-*/ 

-#define COLS (int []){ F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

-#define ROWS (int []){ D0, D1, D2, D3, D5 }

+*/

+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }

+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

+#define UNUSED_PINS

 

 /* COL2ROW or ROW2COL */

 #define DIODE_DIRECTION COL2ROW

 

 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

-#define DEBOUNCE  5

+#define DEBOUNCING_DELAY 5

 

 /* define if matrix has ghost (lacks anti-ghosting diodes) */

 //#define MATRIX_HAS_GHOST

@@ -62,17 +63,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */

 #define LOCKING_RESYNC_ENABLE

 

-/* 

+/*

  * Force NKRO

  *

- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved 

+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

  * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

  * makefile for this to work.)

  *

  * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

  * until the next keyboard reset.

  *

- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is 

+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

  * fully operational during normal computer usage.

  *

  * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

@@ -90,7 +91,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
  * the keyboard. They are best used in combination with the HID Listen program,

  * found here: https://www.pjrc.com/teensy/hid_listen.html

  *

- * The options below allow the magic key functionality to be changed. This is 

+ * The options below allow the magic key functionality to be changed. This is

  * useful if your keyboard/keypad is missing keys and you want magic key support.

  *

  */