diff options
| author | tmk <nobody@nowhere> | 2012-11-01 14:24:21 +0900 |
|---|---|---|
| committer | tmk <nobody@nowhere> | 2012-11-01 14:24:21 +0900 |
| commit | 208f6d7f9146782d4c437aedf75a0a7043db7765 (patch) | |
| tree | 7fbf3fe31ebdfab279685cf5dad2e2346e7357c7 /keyboard/hhkb/README | |
| parent | 16a583d7fd057c3ebcb859db44f097fd8073ec49 (diff) | |
| download | qmk_firmware-208f6d7f9146782d4c437aedf75a0a7043db7765.tar.gz qmk_firmware-208f6d7f9146782d4c437aedf75a0a7043db7765.zip | |
Improve documentation
Diffstat (limited to 'keyboard/hhkb/README')
| -rw-r--r-- | keyboard/hhkb/README | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/keyboard/hhkb/README b/keyboard/hhkb/README deleted file mode 100644 index 65f7dcab5a..0000000000 --- a/keyboard/hhkb/README +++ /dev/null @@ -1,151 +0,0 @@ -Alternative Controller for HHKB -=============================== - -Feature -------- -- Mouse Keys -- NKRO on USB(PJRC Tennsy only) -- Keymap Layers - - -Customize Keymap ----------------- -see keymap.c. - - - -Build -===== -PJRC Teensy ------------ -0. Edit matrix.c. - adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts) -1. Define macros in config_pjrc.h.(Optional) - VENDOR_ID, PRODUCT_ID and string descriptor. - IS_COMMAND -2. Edit Makefile for MCU setting and build options. - MCU, F_CPU - MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE -3. Build hex file. - $ make -f Makefile.pjrc -4. Program MCU. - $ make -f Makefile.pjrc program - - -V-USB ------ -0. Edit matrix.c and usbconfig.h. - adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts) - define macros for V-USB in usbconfig.h. -1. Define macros in config_vusb.h.(Optional) - IS_COMMAND -2. Edit Makefile.vusb for MCU setting and build options. - MCU, F_CPU - MOUSEKEY_ENABLE, EXTRAKEY_ENABLE -3. Build hex file. - $ make -f Makefile.vusb -4. Program MCU. - $ make -f Makefile.vusb program - - Using a bootloader to program for convenience is recommended. - Once program this V-USB bootloader at first, you can program MCU without - extra programmer. You should have reset switch to start up as bootloader - mode in this case. - USBaspLoader: - http://www.obdev.at/products/vusb/usbasploader.html - - -iWRAP ------ -0. Edit matrix.c and usbconfig.h. - adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts) - define macros for V-USB in usbconfig.h. -1. Define macros in config_iwrap.h.(Optional) - IS_COMMAND -2. Edit Makefile.iwrap for MCU setting and build options. - MCU, F_CPU - MOUSEKEY_ENABLE, EXTRAKEY_ENABLE -3. Build hex file. - $ make -f Makefile.iwrap -4. Program MCU. - $ make -f Makefile.iwrap program - - - -Hardware -======== -PJRC Teensy ------------ - +---------------+ - | Teensy++ | - | | - | | HHKB - | | ~~~~ - | PB0-2|------->ROW(6-8) - | PB3-5|------->COL(9-11) - | PB6|------->ENABLE(12) - | PE6|<-------KEY(4) - | PE7|------->PREV(5) - | | - | | - | | - +---------------+ - - -V-USB ------ - +---+ +---------------+ -USB GND | | ATmega168 | -~~~ C3 | | -5V <-------+--------+---|Vcc,AVCC | HHKB - R1 | | ~~~~ -D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8) -D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11) - Z1 Z2 | PC3|------->ENABLE(12) -GND<----+---+-----------|GND PB0|<-------KEY(4) - | PB1|------->PREV(5) - | | - GND+-C2--+--|XTAL1 RXD|------->Debug Console - X1 | TXD|<-------Debug Console - GND+-C3--+--|XTAL2 RST|---SW--+GND - +---------------+ -R1: 1.5K Ohm -R2,R3: 68 Ohm -Z1,Z2: Zener 3.6V -C1,C2: 22pF -C3: 0.1uF -X1: Crystal 20MHz(16MHz/12MHz) -SW: Push Switch(Optional for bootloader) - - -iWRAP ------ - +---------------+ WT12 - 5V | ATmega168 | 5V/3.3V~~~~ - +-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD) -USB | C3 | PC5|<--/----iWRAP(TxD) -~~~ | + | | -5V <--BATT + GND | | HHKB - R1 | | ~~~~ -D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8) -D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11) - Z1 Z2 | PC3|------->ENABLE(12) -GND<----+---+-----------|GND PB0|<-------KEY(4) - | PB1|------->PREV(5) - | | - GND+-C2--+--|XTAL1 RXD|------->Debug Console - X1 | TXD|<-------Debug Console - GND+-C3--+--|XTAL2 RST|---SW--+GND - +---------------+ - -R1: 1.5K Ohm -R2,R3: 68 Ohm -Z1,Z2: Zener 3.6V -C1,C2: 22pF -C3: 0.1uF -X1: Crystal 12MHz -SW: Push Switch(Optional) -BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V). - - -EOF |