[Erez & Jack] Removes keyboards which are not active on qmk

12 files changed, 0 insertions, 1148 deletions

diff --git a/keyboard/phantom/Makefile.lufa b/keyboard/phantom/Makefile.lufa
deleted file mode 100644
index a0b3b1444d..0000000000
--- a/keyboard/phantom/Makefile.lufa
+++ /dev/null
@@ -1,137 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = phantom_lufa
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC +=	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-ansi: OPT_DEFS += -DLAYOUT_ANSI
-ansi: all
-
-ansi_150: OPT_DEFS += -DLAYOUT_ANSI_150
-ansi_150: all
-
-iso: OPT_DEFS += -DLAYOUT_ISO
-iso: all
-
-iso_150: OPT_DEFS += -DLAYOUT_ISO_150
-iso_150: all
-
-7bit: OPT_DEFS += -DLAYOUT_7BIT
-7bit: all
diff --git a/keyboard/phantom/Makefile.pjrc b/keyboard/phantom/Makefile.pjrc
deleted file mode 100644
index 7bf5f80f40..0000000000
--- a/keyboard/phantom/Makefile.pjrc
+++ /dev/null
@@ -1,108 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = phantom_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
-CONSOLE_ENABLE = yes    # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-ansi: OPT_DEFS += -DLAYOUT_ANSI
-ansi: all
-
-ansi_150: OPT_DEFS += -DLAYOUT_ANSI_150
-ansi_150: all
-
-iso: OPT_DEFS += -DLAYOUT_ISO
-iso: all
-
-iso_150: OPT_DEFS += -DLAYOUT_ISO_150
-iso_150: all
-
-7bit: OPT_DEFS += -DLAYOUT_7BIT
-7bit: all
diff --git a/keyboard/phantom/README.md b/keyboard/phantom/README.md
deleted file mode 100644
index 368ae97e85..0000000000
--- a/keyboard/phantom/README.md
+++ /dev/null
@@ -1,248 +0,0 @@
-Phantom keyboard firmware
-======================
-DIY keyboard developed by Geekhack and Deskthority communities.
-The PCB was engineered by bpiphany from the original idea of HaveANiceDay.
-
-## Wiki on Deskthority.net
-- [Info](http://deskthority.net/wiki/Phantom)
-- [Assembly Instructions](http://deskthority.net/wiki/Phantom)
-
-
-Build
------
-Move to this directory then just run `make` like:
-
-    $ make -f Makefile.[pjrc|lufa] [ansi|ansi_150|iso|iso_150|7bit]
-
-Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack.
-
-
-LEDs
-----
-It is possible to configure the LEDs in 2 different ways.
-
-### 1. LED Brightness
-The brightness of the LEDs can be controlled by software.
-
-To select brightness edit [config.h](config.h) and set `LED_BRIGHTNESS` to a value
-between 0 and 255:
-
-    #define LED_BRIGHTNESS  250
-
-
-### 2. Sleep LED
-It is possible to have the LEDs fade in and out when the computer is suspended.
-
-To enable this feature, uncomment the `SLEEP_LED_ENABLE` line in the makefile you are using:
-
-    SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-
-*Note that this will set the LEDs to full brightness as this feature can't be combined with the brightness control.*
-
-
-Keymap
-------
-The PCB supports multiple physical layouts.
-Each layout have their own keymap file.
-
-*Note that only the ANSI keymap is tested on actual hardware.*
-
-To customize a keymap:
-
-1. Edit the file that corresponds to your layout.
-2. Specify your layout when building.
-
-See [keymap.c](keymap.c) to define your own custom layout.
-
-
-### 1. ANSI
-This is the default keymap.
-
-See [keymap_ansi.h](keymap_ansi.h) for detail.
-
-#### 1.0. ANSI Default Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
-     |-----------------------------------------------------------| |-----------|
-     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
-     |-----------------------------------------------------------| '-----------'
-     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-     |-----------------------------------------------------------|     ,---.
-     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |
-     |-----------------------------------------------------------| ,-----------.
-     |Ctl|Gui|Alt|             Space             |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
-     `-----------------------------------------------------------' `-----------'
-
-#### 1.1. ANSI Media Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |   |   |   |   |   |   | |   |   |   |   | |   |   |   |   | |   |   |Slp|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |Mut|V- |V+ |       | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |   |   |   |   |   |   |   |Stp|Ply|Prv|Nxt|Media| |   |   |   |
-     |-----------------------------------------------------------| '-----------'
-     |      |   |   |   |   |   |   |   |   |   |   |   |        |
-     |-----------------------------------------------------------|     ,---.
-     |        |   |   |Clc|   |   |   |   |   |   |   |Caps      |     |   |
-     |-----------------------------------------------------------| ,-----------.
-     |   |   |   |                               |   |   |   |   | |   |   |   |
-     `-----------------------------------------------------------' `-----------'
-
-
-### 2. ANSI 150
-Layout with 1.5 unit modifiers.
-
-See [keymap_ansi_150.h](keymap_ansi_150.h) for detail.
-
-#### 2.0. ANSI 150 Default Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
-     |-----------------------------------------------------------| |-----------|
-     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD|
-     |-----------------------------------------------------------| '-----------'
-     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-     |-----------------------------------------------------------|     ,---.
-     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |
-     |-----------------------------------------------------------| ,-----------.
-     |Ctl |Gui|Alt |             Space             |Alt |Gui|Ctl | |Lef|Dow|Rig|
-     `-----------------------------------------------------------' `-----------'
-
-#### 2.1. ANSI 150 Media Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |   |   |   |   |   |   | |   |   |   |   | |   |   |   |   | |   |   |Slp|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |Mut|V- |V+ |       | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |   |   |   |   |   |   |   |Stp|Ply|Prv|Nxt|Media| |   |   |   |
-     |-----------------------------------------------------------| '-----------'
-     |      |   |   |   |   |   |   |   |   |   |   |   |        |
-     |-----------------------------------------------------------|     ,---.
-     |        |   |   |Clc|   |   |   |   |   |   |   |Caps      |     |   |
-     |-----------------------------------------------------------| ,-----------.
-     |    |   |    |                               |    |   |    | |   |   |   |
-     `-----------------------------------------------------------' `-----------'
-
-
-### 3. ISO
-ISO layout.
-
-See [keymap_iso.h](keymap_iso.h) for detail.
-
-#### 3.0. ISO Default Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
-     |-----------------------------------------------------------| |-----------|
-     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | |Del|End|PgD|
-     |------------------------------------------------------` Ret| '-----------'
-     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|    |
-     |-----------------------------------------------------------|     ,---.
-     |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |
-     |-----------------------------------------------------------| ,-----------.
-     |Ctl|Gui|Alt|             Space             |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
-     `-----------------------------------------------------------' `-----------'
-
-#### 3.1. ISO Media Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |   |   |   |   |   |   | |   |   |   |   | |   |   |   |   | |   |   |Slp|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |Mut|V- |V+ |       | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |   |   |   |   |   |   |   |Stp|Ply|Prv|Nxt|     | |   |   |   |
-     |------------------------------------------------------` Med| '-----------'
-     |      |   |   |   |   |   |   |   |   |   |   |   |   |    |
-     |-----------------------------------------------------------|     ,---.
-     |    |   |   |   |Clc|   |   |   |   |   |   |   |Caps      |     |   |
-     |-----------------------------------------------------------| ,-----------.
-     |   |   |   |                               |   |   |   |   | |   |   |   |
-     `-----------------------------------------------------------' `-----------'
-
-
-### 4. ISO 150
-ISO layout with 1.5 unit modifiers.
-
-See [keymap_iso_150.h](keymap_iso_150.h) for detail.
-
-#### 4.0. ISO 150 Default Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp | |Ins|Hom|PgU|
-     |-----------------------------------------------------------| |-----------|
-     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     | |Del|End|PgD|
-     |------------------------------------------------------` Ret| '-----------'
-     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|    |
-     |-----------------------------------------------------------|     ,---.
-     |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |     |Up |
-     |-----------------------------------------------------------| ,-----------.
-     |Ctl |Gui|Alt |             Space             |Alt |Gui|Ctl | |Lef|Dow|Rig|
-     `-----------------------------------------------------------' `-----------'
-
-#### 4.1. ISO 150 Media Layer
-     ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
-     |   |   |   |   |   |   | |   |   |   |   | |   |   |   |   | |   |   |Slp|
-     `---'   `---------------' `---------------' `---------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |Mut|V- |V+ |       | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |   |   |   |   |   |   |   |Stp|Ply|Prv|Nxt|     | |   |   |   |
-     |------------------------------------------------------` Med| '-----------'
-     |      |   |   |   |   |   |   |   |   |   |   |   |   |    |
-     |-----------------------------------------------------------|     ,---.
-     |    |   |   |   |Clc|   |   |   |   |   |   |   |Caps      |     |   |
-     |-----------------------------------------------------------| ,-----------.
-     |    |   |    |                               |    |   |    | |   |   |   |
-     `-----------------------------------------------------------' `-----------'
-
-
-### 5. 7bit
-Layout using all the available keys on the PCB.
-
-This keymap is only provided as an example of what can be done using this layout.
-No real thought has been put into this keymap.
-
-See [keymap_7bit.h](keymap_7bit.h) for detail.
-
-#### 5.0. 7bit Default Layer
-     ,-----------------------------------------------------------. ,-----------.
-     |Esc|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|V- |V+ | |PrS|ScL|Pau|
-     `-----------------------------------------------------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  (|  )| |Ins|Hom|PgU|
-     |-----------------------------------------------------------| |-----------|
-     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs| |Del|End|PgD|
-     |-----------------------------------------------------------| |-----------|
-     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \| Ret| |Stp|Ply|Med|
-     |-----------------------------------------------------------| |-----------|
-     |Cap|Shif|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Cap| |Prv|Up |Nxt|
-     |-----------------------------------------------------------| |-----------|
-     |Ctrl |Gui|Alt  |Spc  |Bspc |Del|Ret  |Alt  |Gui  |App|Ctrl | |Lef|Dow|Rig|
-     `-----------------------------------------------------------' `-----------'
-
-#### 5.1. 7bit Media Layer
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   | |   |   |Slp|
-     `-----------------------------------------------------------' `-----------'
-     ,-----------------------------------------------------------. ,-----------.
-     |   |   |   |   |   |   |   |   |   |   |Mut|V- |V+ |   |   | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |   |   |   |   |   |   |   |Stp|Ply|Prv|Nxt|Media| |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |      |   |   |   |   |   |   |   |   |   |   |   |   |    | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |   |    |   |   |   |   |   |   |   |   |   |   |      |   | |   |   |   |
-     |-----------------------------------------------------------| |-----------|
-     |     |   |     |     |     |   |     |     |     |   |     | |   |   |   |
-     `-----------------------------------------------------------' `-----------'
diff --git a/keyboard/phantom/config.h b/keyboard/phantom/config.h
deleted file mode 100644
index 6f5389336e..0000000000
--- a/keyboard/phantom/config.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6057
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         Phantom
-
-/* message strings */
-#define DESCRIPTION     t.m.k. keyboard firmware for Phantom
-
-/* matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if need no debouncing */
-#define DEBOUNCE    7
-
-/* Set LED brightness 0-255.
- * This have no effect if sleep LED is enabled. */
-#define LED_BRIGHTNESS  250
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#endif
diff --git a/keyboard/phantom/keymap.c b/keyboard/phantom/keymap.c
deleted file mode 100644
index a040434f24..0000000000
--- a/keyboard/phantom/keymap.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/* 
- * Keymap for Phantom controller
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "host.h"
-#include "debug.h"
-#include "keymap.h"
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
-    K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,      K2P, K2Q, K2R, \
-    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N,      K1P, K1Q, K1R, \
-    K0A, K0B, K0C, K0D,      K0F, K0G, K0H,           K0K, K0L, K0M, K0N,      K0P, K0Q, K0R  \
-) { \
-/*             0         1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16   */  \
-/* 5 */   { KC_##K5A, KC_##K4A, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5O, KC_##K5P, KC_##K5Q, KC_##K5R}, \
-/* 4 */   { KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F, KC_##K4G, KC_##K4H, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4O, KC_##K4P, KC_##K4Q, KC_##K4R}, \
-/* 3 */   { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3P, KC_##K3Q, KC_##K3R}, \
-/* 2 */   { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2P, KC_##K2Q, KC_##K2R}, \
-/* 1 */   { KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_##K1M, KC_##K1N, KC_##K1P, KC_##K1Q, KC_##K1R}, \
-/* 0 */   { KC_##K0A, KC_##K0B, KC_##K0C, KC_##K5B, KC_##K0D, KC_##K0F, KC_##K5G, KC_##K0G, KC_##K0H, KC_NO,    KC_##K0K, KC_##K0L, KC_##K0M, KC_##K0N, KC_##K0P, KC_##K0Q, KC_##K0R} \
-}
-
-#define KEYMAP_ANSI( \
-    K5A,      K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O,      K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O,      K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,      K2N,                     \
-    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L,      K1N,           K1Q,      \
-    K0A, K0B, K0C,                K0G,                K0K, K0L, K0M, K0N,      K0P, K0Q, K0R  \
-) KEYMAP( \
-    K5A, NO,  K5C, K5D, K5E, K5F, NO,  K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, NO,  K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, NO,  K2N,      NO,  NO,  NO,  \
-    K1A, NO,  K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, NO,  K1N,      NO,  K1Q, NO,  \
-    K0A, K0B, K0C, NO,       NO,  K0G, NO,            K0K, K0L, K0M, K0N,      K0P, K0Q, K0R  \
-)
-
-#define KEYMAP_ANSI_150( \
-    K5A,      K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O,      K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O,      K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L,      K2N,                     \
-    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L,      K1N,           K1Q,      \
-    K0A, K0B, K0C,                K0G,                     K0L, K0M, K0N,      K0P, K0Q, K0R  \
-) KEYMAP( \
-    K5A, NO,  K5C, K5D, K5E, K5F, NO,  K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, NO,  K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, NO,  K2N,      NO,  NO,  NO,  \
-    K1A, NO,  K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, NO,  K1N,      NO,  K1Q, NO,  \
-    K0A, K0B, K0C, NO,       NO,  K0G, NO,            NO,  K0L, K0M, K0N,      K0P, K0Q, K0R  \
-)
-
-#define KEYMAP_ISO( \
-    K5A,      K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O,      K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O,      K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,           K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,                     \
-    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L,      K1N,           K1Q,      \
-    K0A, K0B, K0C,                K0G,                K0K, K0L, K0M, K0N,      K0P, K0Q, K0R  \
-) KEYMAP( \
-    K5A, NO,  K5C, K5D, K5E, K5F, NO,  K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, NO,  K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, NO,       K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,      NO,  NO,  NO,  \
-    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, NO,  K1N,      NO,  K1Q, NO,  \
-    K0A, K0B, K0C, NO,       NO,  K0G, NO,            K0K, K0L, K0M, K0N,      K0P, K0Q, K0R  \
-)
-
-#define KEYMAP_ISO_150( \
-    K5A,      K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O,      K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O,      K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,           K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,                     \
-    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L,      K1N,           K1Q,      \
-    K0A, K0B, K0C,                K0G,                     K0L, K0M, K0N,      K0P, K0Q, K0R  \
-) KEYMAP( \
-    K5A, NO,  K5C, K5D, K5E, K5F, NO,  K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, NO,  K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, NO,       K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,      NO,  NO,  NO,  \
-    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, NO,  K1N,      NO,  K1Q, NO,  \
-    K0A, K0B, K0C, NO,       NO,  K0G, NO,            NO,  K0L, K0M, K0N,      K0P, K0Q, K0R  \
-)
-
-#if defined(LAYOUT_7BIT)
-    #include "keymap_7bit.h"
-#elif defined(LAYOUT_ISO_150)
-    #include "keymap_iso_150.h"
-#elif defined(LAYOUT_ISO)
-    #include "keymap_iso.h"
-#elif defined(LAYOUT_ANSI_150)
-    #include "keymap_ansi_150.h"
-#else
-    #include "keymap_ansi.h"
-#endif
-
-#define KEYMAPS_SIZE    (sizeof(keymaps) / sizeof(keymaps[0]))
-#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    if (layer < KEYMAPS_SIZE) {
-        return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-    } else {
-        // fall back to layer 0
-        return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]);
-    }
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    action_t action;
-    if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
-        action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
-    } else {
-        action.code = ACTION_NO;
-    }
-    return action;
-}
diff --git a/keyboard/phantom/keymap_7bit.h b/keyboard/phantom/keymap_7bit.h
deleted file mode 100644
index e6c4eabb22..0000000000
--- a/keyboard/phantom/keymap_7bit.h
+++ /dev/null
@@ -1,42 +0,0 @@
-// Phantom 7bit
-/*
-     * 7bit:
-     *
-     * ,-----------------------------------------------------------. ,-----------.
-     * |Esc|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|V- |V+ | |PrS|ScL|Pau|
-     * `-----------------------------------------------------------' `-----------'
-     * ,-----------------------------------------------------------. ,-----------.
-     * |~  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  (|  )| |Ins|Hom|PgU|
-     * |-----------------------------------------------------------| |-----------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Backs| |Del|End|PgD|
-     * |-----------------------------------------------------------| |-----------|
-     * |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \| Ret| |MSt|Ply|Med|
-     * |-----------------------------------------------------------| |-----------|
-     * |Cap|Shif|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Cap| |Prv|Up |Nxt|
-     * |-----------------------------------------------------------| |-----------|
-     * |Ctrl |Gui|Alt  |Spc  |Bspc |Del|Ret  |Alt  |Gui  |App|Ctrl | |Lef|Dow|Rig|
-     * `-----------------------------------------------------------' `-----------'
-     */
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty + a few media keys */
-    KEYMAP(\
-        ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, VOLD,VOLU, PSCR,SLCK,BRK,  \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, FN1, FN2,  INS, HOME,PGUP, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC,      DEL, END, PGDN, \
-        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,BSLS,ENT,       MSTP,MPLY,MSEL, \
-        CAPS,LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,CAPS,      MPRV,UP,  MNXT, \
-        LCTL,LGUI,LALT,SPC,      BSPC,DEL, ENT,           RALT,RGUI,APP, RCTL,      LEFT,DOWN,RGHT),
-    /* 1: media keys */
-    KEYMAP(\
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,SLEP, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MUTE,VOLD,VOLU,TRNS,TRNS, TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MSTP,MPLY,MPRV,MNXT,MSEL,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,CALC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,     TRNS,TRNS,TRNS,          TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS)
-};
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),
-    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
-    [2] = ACTION_MODS_KEY(MOD_LSFT, KC_0)
-};
diff --git a/keyboard/phantom/keymap_ansi.h b/keyboard/phantom/keymap_ansi.h
deleted file mode 100644
index 96a4c9dfb3..0000000000
--- a/keyboard/phantom/keymap_ansi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-// Phantom ANSI
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    KEYMAP_ANSI(\
-        ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,       PSCR,SLCK,BRK,  \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,      INS, HOME,PGUP, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,      DEL, END, PGDN, \
-        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                       \
-        LSFT,     Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,           UP,        \
-        LCTL,LGUI,LALT,               SPC,                RALT,RGUI,APP, RCTL,      LEFT,DOWN,RGHT),
-    /* 1: media keys */
-    KEYMAP_ANSI(\
-        TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,SLEP, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MUTE,VOLD,VOLU,TRNS,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MSTP,MPLY,MPRV,MNXT,MSEL,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,                      \
-        TRNS,     TRNS,TRNS,CALC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     CAPS,           TRNS,      \
-        TRNS,TRNS,TRNS,               TRNS,               TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS)
-};
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1)
-};
diff --git a/keyboard/phantom/keymap_ansi_150.h b/keyboard/phantom/keymap_ansi_150.h
deleted file mode 100644
index 7fdb9eb19a..0000000000
--- a/keyboard/phantom/keymap_ansi_150.h
+++ /dev/null
@@ -1,22 +0,0 @@
-// Phantom ANSI 150
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    KEYMAP_ANSI_150(\
-        ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,       PSCR,SLCK,BRK,  \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,      INS, HOME,PGUP, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,      DEL, END, PGDN, \
-        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                       \
-        LSFT,     Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,           UP,        \
-        LCTL,LGUI,LALT,               SPC,                     RALT,RGUI,RCTL,      LEFT,DOWN,RGHT),
-    /* 1: media keys */
-    KEYMAP_ANSI_150(\
-        TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,SLEP, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MUTE,VOLD,VOLU,TRNS,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MSTP,MPLY,MPRV,MNXT,MSEL,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,                      \
-        TRNS,     TRNS,TRNS,CALC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     CAPS,           TRNS,      \
-        TRNS,TRNS,TRNS,               TRNS,                    TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS)
-};
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1)
-};
diff --git a/keyboard/phantom/keymap_iso.h b/keyboard/phantom/keymap_iso.h
deleted file mode 100644
index 970f622eee..0000000000
--- a/keyboard/phantom/keymap_iso.h
+++ /dev/null
@@ -1,22 +0,0 @@
-// Phantom ISO
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    KEYMAP_ISO(\
-        ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,       PSCR,SLCK,BRK,  \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,      INS, HOME,PGUP, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,           DEL, END, PGDN, \
-        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,ENT,                       \
-        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,           UP,        \
-        LCTL,LGUI,LALT,               SPC,                RALT,RGUI,APP, RCTL,      LEFT,DOWN,RGHT),
-    /* 1: media keys */
-    KEYMAP_ISO(\
-        TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,SLEP, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MUTE,VOLD,VOLU,           TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MSTP,MPLY,MPRV,MNXT,MSEL,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,                      \
-        TRNS,TRNS,TRNS,TRNS,CALC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     CAPS,           TRNS,      \
-        TRNS,TRNS,TRNS,               TRNS,               TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS)
-};
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1)
-};
diff --git a/keyboard/phantom/keymap_iso_150.h b/keyboard/phantom/keymap_iso_150.h
deleted file mode 100644
index ab9acda1c0..0000000000
--- a/keyboard/phantom/keymap_iso_150.h
+++ /dev/null
@@ -1,22 +0,0 @@
-// Phantom ISO 150
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    KEYMAP_ISO_150(\
-        ESC,      F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,       PSCR,SLCK,BRK,  \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,      INS, HOME,PGUP, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,           DEL, END, PGDN, \
-        FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,NUHS,ENT,                       \
-        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RSFT,           UP,        \
-        LCTL,LGUI,LALT,               SPC,                     RALT,RGUI,RCTL,      LEFT,DOWN,RGHT),
-    /* 1: media keys */
-    KEYMAP_ISO_150(\
-        TRNS,     TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,      TRNS,TRNS,SLEP, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MUTE,VOLD,VOLU,           TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MSTP,MPLY,MPRV,MNXT,MSEL,      TRNS,TRNS,TRNS, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,                      \
-        TRNS,TRNS,TRNS,TRNS,CALC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     CAPS,           TRNS,      \
-        TRNS,TRNS,TRNS,               TRNS,                    TRNS,TRNS,TRNS,      TRNS,TRNS,TRNS)
-};
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1)
-};
diff --git a/keyboard/phantom/led.c b/keyboard/phantom/led.c
deleted file mode 100644
index 41582b6aaf..0000000000
--- a/keyboard/phantom/led.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-    {
-        // Output high.
-        DDRB |= (1<<6);
-        PORTB |= (1<<6);
-    }
-    else
-    {
-        // Output low.
-        DDRB &= ~(1<<6);
-        PORTB &= ~(1<<6);
-    }
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-    {
-        // Output high.
-        DDRB |= (1<<7);
-        PORTB |= (1<<7);
-    }
-    else
-    {
-        // Output low.
-        DDRB &= ~(1<<7);
-        PORTB &= ~(1<<7);
-    }
-}
diff --git a/keyboard/phantom/matrix.c b/keyboard/phantom/matrix.c
deleted file mode 100644
index 6c3ae49c3a..0000000000
--- a/keyboard/phantom/matrix.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Copyright 2012 Jun Wako <wakojun@gmail.com>
- *
- * This is heavily based on phantom/board.{c|h}.
- * https://github.com/BathroomEpiphanies/AVR-Keyboard
- *
- * Copyright (c) 2012 Fredrik Atmer, Bathroom Epiphanies Inc
- * http://bathroomepiphanies.com
- *
- * As for liscensing consult with the original files or its author.
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-// bit array of key state(1:on, 0:off)
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint8_t read_rows(void);
-static void init_rows(void);
-static void unselect_cols(void);
-static void select_col(uint8_t col);
-
-#ifndef SLEEP_LED_ENABLE
-/* LEDs are on output compare pins OC1B OC1C
-   This activates fast PWM mode on them.
-   Prescaler 256 and 8-bit counter results in
-   16000000/256/256 = 244 Hz blink frequency.
-   LED_A: Caps Lock
-   LED_B: Scroll Lock  */
-/* Output on PWM pins are turned off when the timer 
-   reaches the value in the output compare register,
-   and are turned on when it reaches TOP (=256). */
-static
-void setup_leds(void)
-{
-    TCCR1A |=      // Timer control register 1A
-        (1<<WGM10) | // Fast PWM 8-bit
-        (1<<COM1B1)| // Clear OC1B on match, set at TOP
-        (1<<COM1C1); // Clear OC1C on match, set at TOP
-    TCCR1B |=      // Timer control register 1B
-        (1<<WGM12) | // Fast PWM 8-bit
-        (1<<CS12);   // Prescaler 256
-    OCR1B = LED_BRIGHTNESS;    // Output compare register 1B
-    OCR1C = LED_BRIGHTNESS;    // Output compare register 1C
-    // LEDs: LED_A -> PORTB6, LED_B -> PORTB7
-    DDRB  |= (1<<6) | (1<<7);
-    PORTB  &= ~((1<<6) | (1<<7));
-}
-#endif
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-	
-    // initialize row and col
-    unselect_cols();
-    init_rows();
-#ifndef SLEEP_LED_ENABLE
-    setup_leds();
-#endif
-
-    // initialize matrix state: all keys off
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++)  {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t col = 0; col < MATRIX_COLS; col++) {  // 0-16
-        select_col(col);
-        _delay_us(3);       // without this wait it won't read stable value.
-        uint8_t rows = read_rows();
-        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {  // 0-5
-            bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
-            bool curr_bit = rows & (1<<row);
-            if (prev_bit != curr_bit) {
-                matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
-                if (debouncing) {
-                    dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
-                }
-                debouncing = DEBOUNCE;
-            }
-        }
-        unselect_cols();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop32(matrix[i]);
-    }
-    return count;
-}
-
-/* Row pin configuration
- * row: 0   1   2   3   4   5
- * pin: B5  B4  B3  B2  B1  B0
- */
-static void init_rows(void)
-{
-    // Input with pull-up(DDR:0, PORT:1)
-    DDRB  &= ~0b00111111;
-    PORTB |= 0b00111111;
-}
-
-static uint8_t read_rows(void)
-{
-    return (PINB&(1<<5) ? 0 : (1<<0)) |
-           (PINB&(1<<4) ? 0 : (1<<1)) |
-           (PINB&(1<<3) ? 0 : (1<<2)) |
-           (PINB&(1<<2) ? 0 : (1<<3)) |
-           (PINB&(1<<1) ? 0 : (1<<4)) |
-           (PINB&(1<<0) ? 0 : (1<<5));
-}
-
-/* Column pin configuration
- * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13  14  15  16
- * pin: D5  C7  C6  D4  D0  E6  F0  F1  F4  F5  F6  F7  D7  D6  D1  D2  D3
- */
-static void unselect_cols(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRC  |= 0b11000000; // PC: 7 6
-    PORTC |= 0b11000000;
-    DDRD  |= 0b11111111; // PD: 7 6 5 4 3 2 1 0
-    PORTD |= 0b11111111;
-    DDRE  |= 0b01000000; // PE: 6
-    PORTE |= 0b01000000;
-    DDRF  |= 0b11110011; // PF: 7 6 5 4 1 0
-    PORTF |= 0b11110011;
-}
-
-static void select_col(uint8_t col)
-{
-    // Output low(DDR:1, PORT:0) to select
-    switch (col) {
-        case 0:
-            DDRD  |= (1<<5);
-            PORTD &= ~(1<<5);
-            break;
-        case 1:
-            DDRC  |= (1<<7);
-            PORTC &= ~(1<<7);
-            break;
-        case 2:
-            DDRC  |= (1<<6);
-            PORTC &= ~(1<<6);
-            break;
-        case 3:
-            DDRD  |= (1<<4);
-            PORTD &= ~(1<<4);
-            break;
-        case 4:
-            DDRD  |= (1<<0);
-            PORTD &= ~(1<<0);
-            break;
-        case 5:
-            DDRE  |= (1<<6);
-            PORTE &= ~(1<<6);
-            break;
-        case 6:
-            DDRF  |= (1<<0);
-            PORTF &= ~(1<<0);
-            break;
-        case 7:
-            DDRF  |= (1<<1);
-            PORTF &= ~(1<<1);
-            break;
-        case 8:
-            DDRF  |= (1<<4);
-            PORTF &= ~(1<<4);
-            break;
-        case 9:
-            DDRF  |= (1<<5);
-            PORTF &= ~(1<<5);
-            break;
-        case 10:
-            DDRF  |= (1<<6);
-            PORTF &= ~(1<<6);
-            break;
-        case 11:
-            DDRF  |= (1<<7);
-            PORTF &= ~(1<<7);
-            break;
-        case 12:
-            DDRD  |= (1<<7);
-            PORTD &= ~(1<<7);
-            break;
-        case 13:
-            DDRD  |= (1<<6);
-            PORTD &= ~(1<<6);
-            break;
-        case 14:
-            DDRD  |= (1<<1);
-            PORTD &= ~(1<<1);
-            break;
-        case 15:
-            DDRD  |= (1<<2);
-            PORTD &= ~(1<<2);
-            break;
-        case 16:
-            DDRD  |= (1<<3);
-            PORTD &= ~(1<<3);
-            break;
-    }
-}