Add Adafruit Macropad (#17512)

11 files changed, 1338 insertions, 0 deletions

diff --git a/keyboards/adafruit/macropad/config.h b/keyboards/adafruit/macropad/config.h
new file mode 100644
index 0000000000..8d7298e09c
--- /dev/null
+++ b/keyboards/adafruit/macropad/config.h
@@ -0,0 +1,137 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 3
+
+#define VENDOR_ID    0x239A
+#define PRODUCT_ID   0x0108
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Adafruit
+#define PRODUCT      Macropad RP2040
+
+/* Keyboard Matrix Assignments */
+// clang-format off
+#define DIRECT_PINS { \
+    { NO_PIN, NO_PIN, GP0  }, \
+    { GP1,    GP2,    GP3  }, \
+    { GP4,    GP5,    GP6  }, \
+    { GP7,    GP8,    GP9  }, \
+    { GP10,   GP11,   GP12 }  \
+}
+// clang-format on
+
+/* OLED SPI Defines */
+#define OLED_DISPLAY_128X64
+#define OLED_IC OLED_IC_SH1106
+
+/* OLED SPI Pins */
+#define OLED_DC_PIN GP24
+#define OLED_CS_PIN GP22
+#define OLED_RST_PIN GP23
+
+/* Shift OLED columns by 2 pixels */
+#define OLED_COLUMN_OFFSET 2
+
+/* Divisor for OLED */
+#define OLED_SPI_DIVISOR 4
+
+/* ChibiOS SPI definitions */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN GP26
+#define SPI_MOSI_PIN GP27
+#define SPI_MISO_PIN GP28
+
+/* Encoders */
+#define ENCODERS_PAD_A { GP18 }
+#define ENCODERS_PAD_B { GP17 }
+
+#define DEBOUNCE 5
+
+/* Bootmagic lite */
+/* (Press the Encoder button while plugging the keyboard to enter the bootloader) */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 2
+
+/* Double tap the side button to enter bootloader */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP13
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
+
+/* Audio (Unsupported for now)*/
+// #define AUDIO_PIN GP16
+// #define SPEAKER_SHUTDOWN GP14
+
+#ifdef RGB_MATRIX_ENABLE
+
+     /* RGB Defines */
+#    define RGB_DI_PIN GP19
+#    define DRIVER_LED_TOTAL 12
+#    define RGBLED_NUM 12
+
+     /* Enable Framebuffer and keypress effects */
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#    define RGB_MATRIX_KEYPRESSES
+
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif
diff --git a/keyboards/adafruit/macropad/halconf.h b/keyboards/adafruit/macropad/halconf.h
new file mode 100644
index 0000000000..6cd66fd520
--- /dev/null
+++ b/keyboards/adafruit/macropad/halconf.h
@@ -0,0 +1,28 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <halconf.h>
+
+#undef HAL_USE_SPI
+#define HAL_USE_SPI TRUE
+
+#undef SPI_USE_WAIT
+#define SPI_USE_WAIT TRUE
+
+#undef SPI_SELECT_MODE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
diff --git a/keyboards/adafruit/macropad/info.json b/keyboards/adafruit/macropad/info.json
new file mode 100644
index 0000000000..ffa31780a9
--- /dev/null
+++ b/keyboards/adafruit/macropad/info.json
@@ -0,0 +1,24 @@
+{
+    "keyboard_name": "Adafruit Macropad RP2040",
+    "url": "https://learn.adafruit.com/adafruit-macropad-rp2040",
+    "maintainer": "Jpe230",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Mute", "x":2, "y":0},
+                {"label":"Enter", "x":0, "y":1},
+                {"label":"KC_0", "x":1, "y":1},
+                {"label":"BackSpace", "x":2, "y":1},
+                {"label":"KC_7", "x":0, "y":2},
+                {"label":"KC_8", "x":1, "y":2},
+                {"label":"KC_9", "x":2, "y":2},
+                {"label":"KC_4", "x":0, "y":3},
+                {"label":"KC_5", "x":1, "y":3},
+                {"label":"KC_6", "x":2, "y":3},
+                {"label":"KC_1", "x":0, "y":4},
+                {"label":"KC_2", "x":1, "y":4},
+                {"label":"KC_3", "x":2, "y":4}
+            ]
+        }
+    }
+}
diff --git a/keyboards/adafruit/macropad/keymaps/default/keymap.c b/keyboards/adafruit/macropad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..26c6b4ccf2
--- /dev/null
+++ b/keyboards/adafruit/macropad/keymaps/default/keymap.c
@@ -0,0 +1,114 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+                    KC_MUTE,
+      KC_ENT, KC_0, KC_BSPC,
+      KC_7,   KC_8, KC_9,
+      KC_4,   KC_5, KC_6,
+      KC_1,   KC_2, KC_3
+  )
+};
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+  [0] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD) },
+};
+#endif
+
+
+#ifdef OLED_ENABLE
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x3f, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
+    0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x03, 0x83, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe,
+    0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, 0xfe, 0xfe, 0xfe, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x83, 0x83, 0x83, 0x83, 0x83, 0x03,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x81, 0x83, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff,
+    0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x83, 0x83, 0x83, 0x83, 0x83, 0x81,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x01, 0x07, 0x1f, 0x3f, 0x7f, 0x7e, 0xf8, 0xf0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xff, 0xff,
+    0xff, 0xff, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xf0, 0xf8, 0x7e, 0x7f, 0x3f, 0x1f, 0x07, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xc0, 0xc1, 0xc1, 0xc1, 0xc1, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xff, 0xff,
+    0xff, 0xff, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc1, 0xc1, 0xc1, 0xc1, 0xc1, 0xc0,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xfc, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xfc, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc,
+    0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfc,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+  };
+
+  oled_write_raw_P(qmk_logo, sizeof(qmk_logo));
+}
+
+bool oled_task_user(void) {
+  render_qmk_logo();
+  return true;
+}
+
+#endif
+
diff --git a/keyboards/adafruit/macropad/lib/oled_driver_spi.h b/keyboards/adafruit/macropad/lib/oled_driver_spi.h
new file mode 100644
index 0000000000..c8a2cd7d9a
--- /dev/null
+++ b/keyboards/adafruit/macropad/lib/oled_driver_spi.h
@@ -0,0 +1,29 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef OLED_DC_PIN
+#   error "The OLED driver in SPI needs a D/C pin defined"
+#endif
+#ifndef OLED_CS_PIN
+#   error "The OLED driver in SPI needs a CS pin defined"
+#endif
+#ifndef OLED_SPI_MODE
+#   define OLED_SPI_MODE 3
+#endif
+#ifndef OLED_SPI_DIVISOR
+#   define OLED_SPI_DIVISOR 2
+#endif
diff --git a/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c b/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c
new file mode 100644
index 0000000000..dc1289fdb1
--- /dev/null
+++ b/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c
@@ -0,0 +1,827 @@
+/*
+Copyright 2019 Ryan Caltabiano <https://github.com/XScorpion2>
+Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "oled_driver.h"
+#include "oled_driver_spi.h"
+
+#include "spi_master.h"
+
+#include <quantum.h>
+#include OLED_FONT_H
+#include "timer.h"
+#include "print.h"
+
+#include <string.h>
+
+#include "progmem.h"
+
+#include "keyboard.h"
+
+// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
+// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
+
+// Fundamental Commands
+#define CONTRAST 0x81
+#define DISPLAY_ALL_ON 0xA5
+#define DISPLAY_ALL_ON_RESUME 0xA4
+#define NORMAL_DISPLAY 0xA6
+#define INVERT_DISPLAY 0xA7
+#define DISPLAY_ON 0xAF
+#define DISPLAY_OFF 0xAE
+#define NOP 0xE3
+
+// Scrolling Commands
+#define ACTIVATE_SCROLL 0x2F
+#define DEACTIVATE_SCROLL 0x2E
+#define SCROLL_RIGHT 0x26
+#define SCROLL_LEFT 0x27
+#define SCROLL_RIGHT_UP 0x29
+#define SCROLL_LEFT_UP 0x2A
+
+// Addressing Setting Commands
+#define MEMORY_MODE 0x20
+#define COLUMN_ADDR 0x21
+#define PAGE_ADDR 0x22
+#define PAM_SETCOLUMN_LSB 0x00
+#define PAM_SETCOLUMN_MSB 0x10
+#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
+
+// Hardware Configuration Commands
+#define DISPLAY_START_LINE 0x40
+#define SEGMENT_REMAP 0xA0
+#define SEGMENT_REMAP_INV 0xA1
+#define MULTIPLEX_RATIO 0xA8
+#define COM_SCAN_INC 0xC0
+#define COM_SCAN_DEC 0xC8
+#define DISPLAY_OFFSET 0xD3
+#define COM_PINS 0xDA
+#define COM_PINS_SEQ 0x02
+#define COM_PINS_ALT 0x12
+#define COM_PINS_SEQ_LR 0x22
+#define COM_PINS_ALT_LR 0x32
+
+// Timing & Driving Commands
+#define DISPLAY_CLOCK 0xD5
+#define PRE_CHARGE_PERIOD 0xD9
+#define VCOM_DETECT 0xDB
+
+// Advance Graphic Commands
+#define FADE_BLINK 0x23
+#define ENABLE_FADE 0x20
+#define ENABLE_BLINK 0x30
+
+// Charge Pump Commands
+#define CHARGE_PUMP 0x8D
+
+// Misc defines
+#ifndef OLED_BLOCK_COUNT
+#    define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
+#endif
+#ifndef OLED_BLOCK_SIZE
+#    define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+#endif
+
+#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1)
+
+#define ARRAY_SIZE(arr) sizeof(arr)/sizeof(arr[0])
+
+// spi defines
+#define OLED_STATUS_SUCCESS SPI_STATUS_SUCCESS
+
+void oled_spi_init(void) {
+    spi_init();
+
+    setPinOutput(OLED_CS_PIN);
+    writePinHigh(OLED_CS_PIN);
+
+    setPinOutput(OLED_DC_PIN);
+    writePinLow(OLED_DC_PIN);
+}
+
+void oled_spi_start(void) {
+    spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR);
+}
+
+void oled_spi_stop(void) {
+    spi_stop();
+}
+
+// Transmit/Write Funcs.
+bool oled_cmd(const uint8_t *data, uint16_t size) {
+    oled_spi_start();
+    // Command Mode
+    writePinLow(OLED_DC_PIN);
+    // Send the commands
+    if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){
+        oled_spi_stop();
+        return false;
+    }
+    oled_spi_stop();
+    return true;
+}
+
+bool oled_cmd_p(const uint8_t *data, uint16_t size) {
+    return oled_cmd(data, size);
+}
+
+bool oled_write_reg(const uint8_t *data, uint16_t size)
+{
+    oled_spi_start();
+    // Command Mode
+    writePinHigh(OLED_DC_PIN);
+    // Send the commands
+    if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){
+        oled_spi_stop();
+        return false;
+    }
+    oled_spi_stop();
+    return true;
+}
+
+#define HAS_FLAGS(bits, flags) ((bits & flags) == flags)
+
+// Display buffer's is the same as the OLED memory layout
+// this is so we don't end up with rounding errors with
+// parts of the display unusable or don't get cleared correctly
+// and also allows for drawing & inverting
+uint8_t         oled_buffer[OLED_MATRIX_SIZE];
+uint8_t *       oled_cursor;
+OLED_BLOCK_TYPE oled_dirty          = 0;
+bool            oled_initialized    = false;
+bool            oled_active         = false;
+bool            oled_scrolling      = false;
+bool            oled_inverted       = false;
+uint8_t         oled_brightness     = OLED_BRIGHTNESS;
+oled_rotation_t oled_rotation       = 0;
+uint8_t         oled_rotation_width = 0;
+uint8_t         oled_scroll_speed   = 0; // this holds the speed after being remapped to ssd1306 internal values
+uint8_t         oled_scroll_start   = 0;
+uint8_t         oled_scroll_end     = 7;
+#if OLED_TIMEOUT > 0
+uint32_t oled_timeout;
+#endif
+#if OLED_SCROLL_TIMEOUT > 0
+uint32_t oled_scroll_timeout;
+#endif
+#if OLED_UPDATE_INTERVAL > 0
+uint16_t oled_update_timeout;
+#endif
+
+// Flips the rendering bits for a character at the current cursor position
+static void InvertCharacter(uint8_t *cursor) {
+    const uint8_t *end = cursor + OLED_FONT_WIDTH;
+    while (cursor < end) {
+        *cursor = ~(*cursor);
+        cursor++;
+    }
+}
+
+bool oled_init(oled_rotation_t rotation) {
+    oled_rotation = oled_init_user(oled_init_kb(rotation));
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        oled_rotation_width = OLED_DISPLAY_WIDTH;
+    } else {
+        oled_rotation_width = OLED_DISPLAY_HEIGHT;
+    }
+
+    oled_spi_init();
+
+#ifdef OLED_RST_PIN
+    /* Reset device */
+    setPinOutput(OLED_RST_PIN);
+    writePinLow(OLED_RST_PIN);
+    wait_ms(20);
+    writePinHigh(OLED_RST_PIN);
+    wait_ms(20);
+#endif
+
+    static const uint8_t PROGMEM display_setup1[] = {
+        DISPLAY_OFF,
+        DISPLAY_CLOCK,
+        0x80,
+        MULTIPLEX_RATIO,
+        OLED_DISPLAY_HEIGHT - 1,
+        DISPLAY_OFFSET,
+        0x00,
+        DISPLAY_START_LINE | 0x00,
+        CHARGE_PUMP,
+        0x14,
+#if (OLED_IC != OLED_IC_SH1106)
+        // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
+        MEMORY_MODE,
+        0x00, // Horizontal addressing mode
+#endif
+    };
+
+    if (!oled_cmd_p(display_setup1, ARRAY_SIZE(display_setup1))) {
+        print("oled_init cmd set 1 failed\n");
+        return false;
+    }
+
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
+        static const uint8_t PROGMEM display_normal[] = {SEGMENT_REMAP_INV, COM_SCAN_DEC};
+        if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) {
+            print("oled_init cmd normal rotation failed\n");
+            return false;
+        }
+    } else {
+        static const uint8_t PROGMEM display_flipped[] = {SEGMENT_REMAP, COM_SCAN_INC};
+        if (!oled_cmd_p(display_flipped, ARRAY_SIZE(display_flipped))) {
+            print("display_flipped failed\n");
+            return false;
+        }
+    }
+
+    static const uint8_t PROGMEM display_setup2[] = {COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x20, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
+    if (!oled_cmd_p(display_setup2, ARRAY_SIZE(display_setup2))) {
+        print("display_setup2 failed\n");
+        return false;
+    }
+
+#if OLED_TIMEOUT > 0
+    oled_timeout = timer_read32() + OLED_TIMEOUT;
+#endif
+#if OLED_SCROLL_TIMEOUT > 0
+    oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
+#endif
+
+    oled_clear();
+    oled_initialized = true;
+    oled_active      = true;
+    oled_scrolling   = false;
+    return true;
+}
+
+__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+    return rotation;
+}
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return rotation;
+}
+
+void oled_clear(void) {
+    memset(oled_buffer, 0, sizeof(oled_buffer));
+    oled_cursor = &oled_buffer[0];
+    oled_dirty  = OLED_ALL_BLOCKS_MASK;
+}
+
+static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
+    // Calculate commands to set memory addressing bounds.
+    uint8_t start_page   = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
+    uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
+#if (OLED_IC == OLED_IC_SH1106)
+    // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
+    // Column value must be split into high and low nybble and sent as two commands.
+    cmd_array[0] = PAM_PAGE_ADDR | start_page;
+    cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
+    cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
+    cmd_array[3] = NOP;
+    cmd_array[4] = NOP;
+    cmd_array[5] = NOP;
+#else
+    // Commands for use in Horizontal Addressing mode.
+    cmd_array[1] = start_column;
+    cmd_array[4] = start_page;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
+#endif
+}
+
+static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) {
+    cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
+    cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];
+    ;
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
+}
+
+uint8_t crot(uint8_t a, int8_t n) {
+    const uint8_t mask = 0x7;
+    n &= mask;
+    return a << n | a >> (-n & mask);
+}
+
+static void rotate_90(const uint8_t *src, uint8_t *dest) {
+    for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
+        uint8_t selector = (1 << i);
+        for (uint8_t j = 0; j < 8; ++j) {
+            dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
+        }
+    }
+}
+
+void oled_render(void) {
+    if (!oled_initialized) {
+        return;
+    }
+
+    // Do we have work to do?
+    oled_dirty &= OLED_ALL_BLOCKS_MASK;
+    if (!oled_dirty || oled_scrolling) {
+        return;
+    }
+
+    // Find first dirty block
+    uint8_t update_start = 0;
+    while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) {
+        ++update_start;
+    }
+
+    // Set column & page position
+    static uint8_t display_start[] = {COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        calc_bounds(update_start, display_start);
+    } else {
+        calc_bounds_90(update_start, display_start);
+    }
+
+    // Send column & page position
+    if (!oled_cmd(display_start, ARRAY_SIZE(display_start))) {
+        print("oled_render offset command failed\n");
+        return;
+    }
+
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        // Send render data chunk as is
+        if (!oled_write_reg(&oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE)) {
+            print("oled_render data failed\n");
+            return;
+        }
+    } else {
+        // Rotate the render chunks
+        const static uint8_t source_map[] = OLED_SOURCE_MAP;
+        const static uint8_t target_map[] = OLED_TARGET_MAP;
+
+        static uint8_t temp_buffer[OLED_BLOCK_SIZE];
+        memset(temp_buffer, 0, sizeof(temp_buffer));
+        for (uint8_t i = 0; i < sizeof(source_map); ++i) {
+            rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
+        }
+
+        // Send render data chunk after rotating
+        if (!oled_write_reg(temp_buffer, OLED_BLOCK_SIZE)) {
+            print("oled_render90 data failed\n");
+            return;
+        }
+    }
+
+    // Turn on display if it is off
+    oled_on();
+
+    // Clear dirty flag
+    oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start);
+}
+
+void oled_set_cursor(uint8_t col, uint8_t line) {
+    uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
+
+    // Out of bounds?
+    if (index >= OLED_MATRIX_SIZE) {
+        index = 0;
+    }
+
+    oled_cursor = &oled_buffer[index];
+}
+
+void oled_advance_page(bool clearPageRemainder) {
+    uint16_t index     = oled_cursor - &oled_buffer[0];
+    uint8_t  remaining = oled_rotation_width - (index % oled_rotation_width);
+
+    if (clearPageRemainder) {
+        // Remaining Char count
+        remaining = remaining / OLED_FONT_WIDTH;
+
+        // Write empty character until next line
+        while (remaining--)
+            oled_write_char(' ', false);
+    } else {
+        // Next page index out of bounds?
+        if (index + remaining >= OLED_MATRIX_SIZE) {
+            index     = 0;
+            remaining = 0;
+        }
+
+        oled_cursor = &oled_buffer[index + remaining];
+    }
+}
+
+void oled_advance_char(void) {
+    uint16_t nextIndex      = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
+    uint8_t  remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
+
+    // Do we have enough space on the current line for the next character
+    if (remainingSpace < OLED_FONT_WIDTH) {
+        nextIndex += remainingSpace;
+    }
+
+    // Did we go out of bounds
+    if (nextIndex >= OLED_MATRIX_SIZE) {
+        nextIndex = 0;
+    }
+
+    // Update cursor position
+    oled_cursor = &oled_buffer[nextIndex];
+}
+
+// Main handler that writes character data to the display buffer
+void oled_write_char(const char data, bool invert) {
+    // Advance to the next line if newline
+    if (data == '\n') {
+        // Old source wrote ' ' until end of line...
+        oled_advance_page(true);
+        return;
+    }
+
+    if (data == '\r') {
+        oled_advance_page(false);
+        return;
+    }
+
+    // copy the current render buffer to check for dirty after
+    static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
+    memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
+
+    _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array");
+
+    // set the reder buffer data
+    uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
+    if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
+        memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
+    } else {
+        const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
+        memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
+    }
+
+    // Invert if needed
+    if (invert) {
+        InvertCharacter(oled_cursor);
+    }
+
+    // Dirty check
+    if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
+        uint16_t index = oled_cursor - &oled_buffer[0];
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
+        // Edgecase check if the written data spans the 2 chunks
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE));
+    }
+
+    // Finally move to the next char
+    oled_advance_char();
+}
+
+void oled_write(const char *data, bool invert) {
+    const char *end = data + strlen(data);
+    while (data < end) {
+        oled_write_char(*data, invert);
+        data++;
+    }
+}
+
+void oled_write_ln(const char *data, bool invert) {
+    oled_write(data, invert);
+    oled_advance_page(true);
+}
+
+void oled_pan(bool left) {
+    uint16_t i = 0;
+    for (uint16_t y = 0; y < OLED_DISPLAY_HEIGHT / 8; y++) {
+        if (left) {
+            for (uint16_t x = 0; x < OLED_DISPLAY_WIDTH - 1; x++) {
+                i              = y * OLED_DISPLAY_WIDTH + x;
+                oled_buffer[i] = oled_buffer[i + 1];
+            }
+        } else {
+            for (uint16_t x = OLED_DISPLAY_WIDTH - 1; x > 0; x--) {
+                i              = y * OLED_DISPLAY_WIDTH + x;
+                oled_buffer[i] = oled_buffer[i - 1];
+            }
+        }
+    }
+    oled_dirty = OLED_ALL_BLOCKS_MASK;
+}
+
+oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
+    if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE;
+    oled_buffer_reader_t ret_reader;
+    ret_reader.current_element         = &oled_buffer[start_index];
+    ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index;
+    return ret_reader;
+}
+
+void oled_write_raw_byte(const char data, uint16_t index) {
+    if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE;
+    if (oled_buffer[index] == data) return;
+    oled_buffer[index] = data;
+    oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
+}
+
+void oled_write_raw(const char *data, uint16_t size) {
+    uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
+    if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
+    for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
+        uint8_t c = *data++;
+        if (oled_buffer[i] == c) continue;
+        oled_buffer[i] = c;
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
+    }
+}
+
+void oled_write_pixel(uint8_t x, uint8_t y, bool on) {
+    if (x >= oled_rotation_width) {
+        return;
+    }
+    uint16_t index = x + (y / 8) * oled_rotation_width;
+    if (index >= OLED_MATRIX_SIZE) {
+        return;
+    }
+    uint8_t data = oled_buffer[index];
+    if (on) {
+        data |= (1 << (y % 8));
+    } else {
+        data &= ~(1 << (y % 8));
+    }
+    if (oled_buffer[index] != data) {
+        oled_buffer[index] = data;
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
+    }
+}
+
+#if defined(__AVR__)
+void oled_write_P(const char *data, bool invert) {
+    uint8_t c = pgm_read_byte(data);
+    while (c != 0) {
+        oled_write_char(c, invert);
+        c = pgm_read_byte(++data);
+    }
+}
+
+void oled_write_ln_P(const char *data, bool invert) {
+    oled_write_P(data, invert);
+    oled_advance_page(true);
+}
+
+void oled_write_raw_P(const char *data, uint16_t size) {
+    uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
+    if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
+    for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
+        uint8_t c = pgm_read_byte(data++);
+        if (oled_buffer[i] == c) continue;
+        oled_buffer[i] = c;
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
+    }
+}
+#endif // defined(__AVR__)
+
+bool oled_on(void) {
+    if (!oled_initialized) {
+        return oled_active;
+    }
+
+#if OLED_TIMEOUT > 0
+    oled_timeout = timer_read32() + OLED_TIMEOUT;
+#endif
+
+    static const uint8_t PROGMEM display_on[] =
+#ifdef OLED_FADE_OUT
+        {FADE_BLINK, 0x00};
+#else
+        {DISPLAY_ON};
+#endif
+
+    if (!oled_active) {
+        if (!oled_cmd_p(display_on, ARRAY_SIZE(display_on))) {
+            print("oled_on cmd failed\n");
+            return oled_active;
+        }
+        oled_active = true;
+    }
+    return oled_active;
+}
+
+bool oled_off(void) {
+    if (!oled_initialized) {
+        return !oled_active;
+    }
+
+    static const uint8_t PROGMEM display_off[] =
+#ifdef OLED_FADE_OUT
+        {FADE_BLINK, ENABLE_FADE | OLED_FADE_OUT_INTERVAL};
+#else
+        {DISPLAY_OFF};
+#endif
+
+    if (oled_active) {
+        if (!oled_cmd_p(display_off, ARRAY_SIZE(display_off))) {
+            print("oled_off cmd failed\n");
+            return oled_active;
+        }
+        oled_active = false;
+    }
+    return !oled_active;
+}
+
+bool is_oled_on(void) {
+    return oled_active;
+}
+
+uint8_t oled_set_brightness(uint8_t level) {
+    if (!oled_initialized) {
+        return oled_brightness;
+    }
+
+    uint8_t set_contrast[] = { CONTRAST, level};
+    if (oled_brightness != level) {
+        if (!oled_cmd(set_contrast, ARRAY_SIZE(set_contrast))) {
+            print("set_brightness cmd failed\n");
+            return oled_brightness;
+        }
+        oled_brightness = level;
+    }
+    return oled_brightness;
+}
+
+uint8_t oled_get_brightness(void) {
+    return oled_brightness;
+}
+
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) {
+    oled_scroll_start = start_line;
+    oled_scroll_end   = end_line;
+}
+
+void oled_scroll_set_speed(uint8_t speed) {
+    // Sets the speed for scrolling... does not take effect
+    // until scrolling is either started or restarted
+    // the ssd1306 supports 8 speeds
+    // FrameRate2   speed = 7
+    // FrameRate3   speed = 4
+    // FrameRate4   speed = 5
+    // FrameRate5   speed = 0
+    // FrameRate25  speed = 6
+    // FrameRate64  speed = 1
+    // FrameRate128 speed = 2
+    // FrameRate256 speed = 3
+    // for ease of use these are remaped here to be in order
+    static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3};
+    oled_scroll_speed                    = scroll_remap[speed];
+}
+
+bool oled_scroll_right(void) {
+    if (!oled_initialized) {
+        return oled_scrolling;
+    }
+
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        uint8_t display_scroll_right[] = {SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (!oled_cmd(display_scroll_right, ARRAY_SIZE(display_scroll_right))) {
+            print("oled_scroll_right cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
+    }
+    return oled_scrolling;
+}
+
+bool oled_scroll_left(void) {
+    if (!oled_initialized) {
+        return oled_scrolling;
+    }
+
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        uint8_t display_scroll_left[] = {SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (!oled_cmd(display_scroll_left, ARRAY_SIZE(display_scroll_left))) {
+            print("oled_scroll_left cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
+    }
+    return oled_scrolling;
+}
+
+bool oled_scroll_off(void) {
+    if (!oled_initialized) {
+        return !oled_scrolling;
+    }
+
+    if (oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_off[] = {DEACTIVATE_SCROLL};
+        if (!oled_cmd_p(display_scroll_off, ARRAY_SIZE(display_scroll_off))) {
+            print("oled_scroll_off cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = false;
+        oled_dirty     = OLED_ALL_BLOCKS_MASK;
+    }
+    return !oled_scrolling;
+}
+
+bool is_oled_scrolling(void) {
+    return oled_scrolling;
+}
+
+bool oled_invert(bool invert) {
+    if (!oled_initialized) {
+        return oled_inverted;
+    }
+
+    if (invert && !oled_inverted) {
+        static const uint8_t PROGMEM display_inverted[] = {INVERT_DISPLAY};
+        if (!oled_cmd_p(display_inverted, ARRAY_SIZE(display_inverted))) {
+            print("oled_invert cmd failed\n");
+            return oled_inverted;
+        }
+        oled_inverted = true;
+    } else if (!invert && oled_inverted) {
+        static const uint8_t PROGMEM display_normal[] = {NORMAL_DISPLAY};
+        if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) {
+            print("oled_invert cmd failed\n");
+            return oled_inverted;
+        }
+        oled_inverted = false;
+    }
+
+    return oled_inverted;
+}
+
+uint8_t oled_max_chars(void) {
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
+    }
+    return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
+}
+
+uint8_t oled_max_lines(void) {
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
+    }
+    return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
+}
+
+void oled_task(void) {
+    if (!oled_initialized) {
+        return;
+    }
+
+#if OLED_UPDATE_INTERVAL > 0
+    if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) {
+        oled_update_timeout = timer_read();
+        oled_set_cursor(0, 0);
+        oled_task_kb();
+    }
+#else
+    oled_set_cursor(0, 0);
+    oled_task_kb();
+#endif
+
+#if OLED_SCROLL_TIMEOUT > 0
+    if (oled_dirty && oled_scrolling) {
+        oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
+        oled_scroll_off();
+    }
+#endif
+
+    // Smart render system, no need to check for dirty
+    oled_render();
+
+    // Display timeout check
+#if OLED_TIMEOUT > 0
+    if (oled_active && timer_expired32(timer_read32(), oled_timeout)) {
+        oled_off();
+    }
+#endif
+
+#if OLED_SCROLL_TIMEOUT > 0
+    if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) {
+#    ifdef OLED_SCROLL_TIMEOUT_RIGHT
+        oled_scroll_right();
+#    else
+        oled_scroll_left();
+#    endif
+    }
+#endif
+}
+
+__attribute__((weak)) bool oled_task_kb(void) {
+    return oled_task_user();
+}
+__attribute__((weak)) bool oled_task_user(void) {
+    return true;
+}
diff --git a/keyboards/adafruit/macropad/macropad.c b/keyboards/adafruit/macropad/macropad.c
new file mode 100644
index 0000000000..a82a2dabb1
--- /dev/null
+++ b/keyboards/adafruit/macropad/macropad.c
@@ -0,0 +1,56 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "macropad.h"
+
+#ifdef RGB_MATRIX_ENABLE
+
+#define NA NO_LED
+
+/* RGB Positioning */
+led_config_t g_led_config = { {
+    { NA,  NA, NA },
+    {  0,   1,  2 },
+    {  3,   4,  5 },
+    {  6,   7,  8 },
+    {  9,  10, 11 }
+}, {
+    { 0,  0 }, { 112,  0 }, { 224,  0},
+    { 0, 21 }, { 112, 21 }, { 224, 21},
+    { 0, 42 }, { 112, 42 }, { 224, 42},
+    { 0, 64 }, { 112, 64 }, { 224, 64}
+}, {
+    4, 4, 4,
+    4, 4, 4,
+    4, 4, 4,
+    4, 4, 4
+} };
+
+#endif
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    if (index == 0) {
+        if (clockwise) {
+            tap_code_delay(KC_VOLU, 10);
+        } else {
+            tap_code_delay(KC_VOLD, 10);
+        }
+    }
+    return true;
+}
+#endif
diff --git a/keyboards/adafruit/macropad/macropad.h b/keyboards/adafruit/macropad/macropad.h
new file mode 100644
index 0000000000..6e2e3524b7
--- /dev/null
+++ b/keyboards/adafruit/macropad/macropad.h
@@ -0,0 +1,38 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+// clang-format off
+ #define LAYOUT(  \
+             K02, \
+   K10, K11, K12, \
+   K20, K21, K22, \
+   K30, K31, K32, \
+   K40, K41, K42  \
+ ) \
+ { \
+   { ___, ___, K02 }, \
+   { K10, K11, K12 }, \
+   { K20, K21, K22 }, \
+   { K30, K31, K32 }, \
+   { K40, K41, K42 }  \
+ }
+// clang-format on
diff --git a/keyboards/adafruit/macropad/mcuconf.h b/keyboards/adafruit/macropad/mcuconf.h
new file mode 100644
index 0000000000..198a2eea69
--- /dev/null
+++ b/keyboards/adafruit/macropad/mcuconf.h
@@ -0,0 +1,22 @@
+/* Copyright 2022 Jose Pablo Ramirez <jp.ramangulo@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef RP_SPI_USE_SPI1
+#define RP_SPI_USE_SPI1 TRUE
diff --git a/keyboards/adafruit/macropad/readme.md b/keyboards/adafruit/macropad/readme.md
new file mode 100644
index 0000000000..fe7375b336
--- /dev/null
+++ b/keyboards/adafruit/macropad/readme.md
@@ -0,0 +1,37 @@
+# Adafruit MacroPad RP2040
+
+![AdafruitMacropad](https://i.imgur.com/dSBSwcJh.jpeg)
+
+A RP2040-powered Macropad with a 3x4 layout.
+
+- Keyboard Maintainer: [Jpe230](https://github.com/jpe230/) 
+- Hardware Supported: Adafruit MacroPad RP2040
+- Hardware Availability: [Barebones kit](https://www.adafruit.com/product/5100) [Starter Kit](https://www.adafruit.com/product/5128)
+
+Make example for this board (after setting up your build environment):
+
+```sh
+qmk compile -kb adafruit/macropad -km default
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Features
+
+- Raspberry Pi RP2040 Chip + 8MB Flash memory - Dual-core Cortex M0+ at ~130MHz with 264KB of RAM.
+- 3x4 Mechanical key switch sockets - accepts any Cherry MX-compatible switches. Individually tied to GPIO pins (not matrix wired)
+- One NeoPixel RGB LED per switch, on north side.
+- Rotary encoder, 20 detents per rotation, with push-switch on GPIO pin. Push switch is also used for entering bootloader mode when held down on power-up or reset.
+- 128x64 SH1106 Monochrome OLED display - On high-speed hardware SPI port for quick updates.
+- 8mm Speaker/Buzzer - With Class D amplifier and RC filter, can be used to make simple beeps and sounds effects. (Unsupported for now)
+- STEMMA QT Connector - Allows adding any I2C sensors/displays/devices with plug-and-play cables.
+- Reset button - On the side, for quick restarting, press it twice to enter bootloader.
+- Four M3 mounting bosses - Make custom enclosures easily.
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the rotary encoder push-button on power-up or reset.
+* **Physical reset button**: Press twice the button on the side while the board is connected.
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
diff --git a/keyboards/adafruit/macropad/rules.mk b/keyboards/adafruit/macropad/rules.mk
new file mode 100644
index 0000000000..3636424a71
--- /dev/null
+++ b/keyboards/adafruit/macropad/rules.mk
@@ -0,0 +1,26 @@
+# MCU name
+MCU = RP2040
+# Bootloader selection
+BOOTLOADER = rp2040
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+# AUDIO_DRIVER = pwm_software
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+WS2812_DRIVER = vendor
+OLED_ENABLE = yes
+OLED_DRIVER = custom
+# Project specific files
+SRC += lib/ssd1306_sh1106.c
+QUANTUM_LIB_SRC += spi_master.c