diff options
| author | fauxpark <fauxpark@gmail.com> | 2019-10-06 05:09:35 +1100 |
|---|---|---|
| committer | Drashna Jaelre <drashna@live.com> | 2019-10-05 11:09:35 -0700 |
| commit | e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6 (patch) | |
| tree | 1f8c889788cd3958d0583d8a8b9192e3425ba115 /keyboards/catch22/rules.mk | |
| parent | 19b60c273ab63c250db748e5eead6baba88cd0d8 (diff) | |
| download | qmk_firmware-e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6.tar.gz qmk_firmware-e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6.zip | |
Cleanup rules.mk for 32U4 keyboards, A-F (#6804)
* Cleanup rules.mk for 32U4 keyboards, A-F
* Put back stuff in VIA keymaps
Diffstat (limited to 'keyboards/catch22/rules.mk')
| -rw-r--r-- | keyboards/catch22/rules.mk | 50 |
1 files changed, 8 insertions, 42 deletions
diff --git a/keyboards/catch22/rules.mk b/keyboards/catch22/rules.mk index 2b76e465cf..227117b766 100644 --- a/keyboards/catch22/rules.mk +++ b/keyboards/catch22/rules.mk @@ -1,49 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # @@ -57,4 +24,3 @@ NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https:/ BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. - |