Merge https://github.com/jackhumbert/qmk_firmware

12 files changed, 1257 insertions, 0 deletions

diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile
new file mode 100644
index 0000000000..43ea9d82d9
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile
@@ -0,0 +1,49 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = KL2x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MKL26Z64
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = kl2x
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_LC
+
+# Cortex version
+# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
+MCU  = cortex-m0plus
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0
new file mode 100644
index 0000000000..dbf12c3631
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0
@@ -0,0 +1,77 @@
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX128
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x5
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk
diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2
new file mode 100644
index 0000000000..41bfa41a0c
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2
@@ -0,0 +1,77 @@
+# Target file name (without extension).
+PROJECT = ch
+
+# Directory common source files exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MK20DX256
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+
+include $(TMK_DIR)/tool/chibios/common.mk
+include $(TMK_DIR)/tool/chibios/chibios.mk
diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
new file mode 100644
index 0000000000..cb36996c33
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
@@ -0,0 +1,524 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/chconf.h

+ * @brief   Configuration file template.

+ * @details A copy of this file must be placed in each project directory, it

+ *          contains the application specific kernel settings.

+ *

+ * @addtogroup config

+ * @details Kernel related settings and hooks.

+ * @{

+ */

+

+#ifndef CHCONF_H

+#define CHCONF_H

+

+#define _CHIBIOS_RT_CONF_

+

+/*===========================================================================*/

+/**

+ * @name System timers settings

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   System time counter resolution.

+ * @note    Allowed values are 16 or 32 bits.

+ */

+#define CH_CFG_ST_RESOLUTION                32

+

+/**

+ * @brief   System tick frequency.

+ * @details Frequency of the system timer that drives the system ticks. This

+ *          setting also defines the system tick time unit.

+ */

+#define CH_CFG_ST_FREQUENCY                 1000

+

+/**

+ * @brief   Time delta constant for the tick-less mode.

+ * @note    If this value is zero then the system uses the classic

+ *          periodic tick. This value represents the minimum number

+ *          of ticks that is safe to specify in a timeout directive.

+ *          The value one is not valid, timeouts are rounded up to

+ *          this value.

+ */

+#define CH_CFG_ST_TIMEDELTA                 0

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel parameters and options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Round robin interval.

+ * @details This constant is the number of system ticks allowed for the

+ *          threads before preemption occurs. Setting this value to zero

+ *          disables the preemption for threads with equal priority and the

+ *          round robin becomes cooperative. Note that higher priority

+ *          threads can still preempt, the kernel is always preemptive.

+ * @note    Disabling the round robin preemption makes the kernel more compact

+ *          and generally faster.

+ * @note    The round robin preemption is not supported in tickless mode and

+ *          must be set to zero in that case.

+ */

+#define CH_CFG_TIME_QUANTUM                 20

+

+/**

+ * @brief   Managed RAM size.

+ * @details Size of the RAM area to be managed by the OS. If set to zero

+ *          then the whole available RAM is used. The core memory is made

+ *          available to the heap allocator and/or can be used directly through

+ *          the simplified core memory allocator.

+ *

+ * @note    In order to let the OS manage the whole RAM the linker script must

+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.

+ * @note    Requires @p CH_CFG_USE_MEMCORE.

+ */

+#define CH_CFG_MEMCORE_SIZE                 0

+

+/**

+ * @brief   Idle thread automatic spawn suppression.

+ * @details When this option is activated the function @p chSysInit()

+ *          does not spawn the idle thread. The application @p main()

+ *          function becomes the idle thread and must implement an

+ *          infinite loop.

+ */

+#define CH_CFG_NO_IDLE_THREAD               FALSE

+

+/* Use __WFI in the idle thread for waiting. Does lower the power

+ * consumption. */

+#define CORTEX_ENABLE_WFI_IDLE              TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Performance options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   OS optimization.

+ * @details If enabled then time efficient rather than space efficient code

+ *          is used when two possible implementations exist.

+ *

+ * @note    This is not related to the compiler optimization options.

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_OPTIMIZE_SPEED               TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Subsystem options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Time Measurement APIs.

+ * @details If enabled then the time measurement APIs are included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_TM                       FALSE

+

+/**

+ * @brief   Threads registry APIs.

+ * @details If enabled then the registry APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_REGISTRY                 TRUE

+

+/**

+ * @brief   Threads synchronization APIs.

+ * @details If enabled then the @p chThdWait() function is included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_WAITEXIT                 TRUE

+

+/**

+ * @brief   Semaphores APIs.

+ * @details If enabled then the Semaphores APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_SEMAPHORES               TRUE

+

+/**

+ * @brief   Semaphores queuing mode.

+ * @details If enabled then the threads are enqueued on semaphores by

+ *          priority rather than in FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

+

+/**

+ * @brief   Mutexes APIs.

+ * @details If enabled then the mutexes APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MUTEXES                  TRUE

+

+/**

+ * @brief   Enables recursive behavior on mutexes.

+ * @note    Recursive mutexes are heavier and have an increased

+ *          memory footprint.

+ *

+ * @note    The default is @p FALSE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

+

+/**

+ * @brief   Conditional Variables APIs.

+ * @details If enabled then the conditional variables APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_CONDVARS                 TRUE

+

+/**

+ * @brief   Conditional Variables APIs with timeout.

+ * @details If enabled then the conditional variables APIs with timeout

+ *          specification are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_CONDVARS.

+ */

+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

+

+/**

+ * @brief   Events Flags APIs.

+ * @details If enabled then the event flags APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_EVENTS                   TRUE

+

+/**

+ * @brief   Events Flags APIs with timeout.

+ * @details If enabled then the events APIs with timeout specification

+ *          are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_EVENTS.

+ */

+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

+

+/**

+ * @brief   Synchronous Messages APIs.

+ * @details If enabled then the synchronous messages APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MESSAGES                 TRUE

+

+/**

+ * @brief   Synchronous Messages queuing mode.

+ * @details If enabled then messages are served by priority rather than in

+ *          FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_MESSAGES.

+ */

+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

+

+/**

+ * @brief   Mailboxes APIs.

+ * @details If enabled then the asynchronous messages (mailboxes) APIs are

+ *          included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_MAILBOXES                TRUE

+

+/**

+ * @brief   Core Memory Manager APIs.

+ * @details If enabled then the core memory manager APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMCORE                  TRUE

+

+/**

+ * @brief   Heap Allocator APIs.

+ * @details If enabled then the memory heap allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

+ *          @p CH_CFG_USE_SEMAPHORES.

+ * @note    Mutexes are recommended.

+ */

+#define CH_CFG_USE_HEAP                     TRUE

+

+/**

+ * @brief   Memory Pools Allocator APIs.

+ * @details If enabled then the memory pools allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMPOOLS                 TRUE

+

+/**

+ * @brief   Dynamic Threads APIs.

+ * @details If enabled then the dynamic threads creation APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_WAITEXIT.

+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

+ */

+#define CH_CFG_USE_DYNAMIC                  TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Debug options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Debug option, kernel statistics.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_STATISTICS                   FALSE

+

+/**

+ * @brief   Debug option, system state check.

+ * @details If enabled the correct call protocol for system APIs is checked

+ *          at runtime.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE

+

+/**

+ * @brief   Debug option, parameters checks.

+ * @details If enabled then the checks on the API functions input

+ *          parameters are activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_CHECKS                TRUE

+

+/**

+ * @brief   Debug option, consistency checks.

+ * @details If enabled then all the assertions in the kernel code are

+ *          activated. This includes consistency checks inside the kernel,

+ *          runtime anomalies and port-defined checks.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_ASSERTS               TRUE

+

+/**

+ * @brief   Debug option, trace buffer.

+ * @details If enabled then the trace buffer is activated.

+ *

+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.

+ */

+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED

+

+/**

+ * @brief   Trace buffer entries.

+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is

+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.

+ */

+#define CH_DBG_TRACE_BUFFER_SIZE            128

+

+/**

+ * @brief   Debug option, stack checks.

+ * @details If enabled then a runtime stack check is performed.

+ *

+ * @note    The default is @p FALSE.

+ * @note    The stack check is performed in a architecture/port dependent way.

+ *          It may not be implemented or some ports.

+ * @note    The default failure mode is to halt the system with the global

+ *          @p panic_msg variable set to @p NULL.

+ */

+#define CH_DBG_ENABLE_STACK_CHECK           TRUE

+

+/**

+ * @brief   Debug option, stacks initialization.

+ * @details If enabled then the threads working area is filled with a byte

+ *          value when a thread is created. This can be useful for the

+ *          runtime measurement of the used stack.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_FILL_THREADS                 TRUE

+

+/**

+ * @brief   Debug option, threads profiling.

+ * @details If enabled then a field is added to the @p thread_t structure that

+ *          counts the system ticks occurred while executing the thread.

+ *

+ * @note    The default is @p FALSE.

+ * @note    This debug option is not currently compatible with the

+ *          tickless mode.

+ */

+#define CH_DBG_THREADS_PROFILING            FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel hooks

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads descriptor structure extension.

+ * @details User fields added to the end of the @p thread_t structure.

+ */

+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

+  /* Add threads custom fields here.*/

+

+/**

+ * @brief   Threads initialization hook.

+ * @details User initialization code added to the @p chThdInit() API.

+ *

+ * @note    It is invoked from within @p chThdInit() and implicitly from all

+ *          the threads creation APIs.

+ */

+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

+  /* Add threads initialization code here.*/                                \

+}

+

+/**

+ * @brief   Threads finalization hook.

+ * @details User finalization code added to the @p chThdExit() API.

+ */

+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

+  /* Add threads finalization code here.*/                                  \

+}

+

+/**

+ * @brief   Context switch hook.

+ * @details This hook is invoked just before switching between threads.

+ */

+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

+  /* Context switch code here.*/                                            \

+}

+

+/**

+ * @brief   ISR enter hook.

+ */

+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

+  /* IRQ prologue code here.*/                                              \

+}

+

+/**

+ * @brief   ISR exit hook.

+ */

+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

+  /* IRQ epilogue code here.*/                                              \

+}

+

+/**

+ * @brief   Idle thread enter hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to activate a power saving mode.

+ */

+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

+  /* Idle-enter code here.*/                                                \

+}

+

+/**

+ * @brief   Idle thread leave hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to deactivate a power saving mode.

+ */

+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

+  /* Idle-leave code here.*/                                                \

+}

+

+/**

+ * @brief   Idle Loop hook.

+ * @details This hook is continuously invoked by the idle thread loop.

+ */

+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

+  /* Idle loop code here.*/                                                 \

+}

+

+/**

+ * @brief   System tick event hook.

+ * @details This hook is invoked in the system tick handler immediately

+ *          after processing the virtual timers queue.

+ */

+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

+  /* System tick event code here.*/                                         \

+}

+

+/**

+ * @brief   System halt hook.

+ * @details This hook is invoked in case to a system halting error before

+ *          the system is halted.

+ */

+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

+  /* System halt code here.*/                                               \

+}

+

+/**

+ * @brief   Trace hook.

+ * @details This hook is invoked each time a new record is written in the

+ *          trace buffer.

+ */

+#define CH_CFG_TRACE_HOOK(tep) {                                            \

+  /* Trace code here.*/                                                     \

+}

+

+/** @} */

+

+/*===========================================================================*/

+/* Port-specific settings (override port settings defaulted in chcore.h).    */

+/*===========================================================================*/

+

+#endif  /* CHCONF_H */

+

+/** @} */

diff --git a/keyboards/chibios_test/teensy_lc_onekey/config.h b/keyboards/chibios_test/teensy_lc_onekey/config.h
new file mode 100644
index 0000000000..d9eb05d2ac
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/config.h
@@ -0,0 +1,6 @@
+#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
+#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
+
+#include "../config.h"
+
+#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
new file mode 100644
index 0000000000..b1d2cd5502
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
@@ -0,0 +1,187 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/halconf.h

+ * @brief   HAL configuration header.

+ * @details HAL configuration file, this file allows to enable or disable the

+ *          various device drivers from your application. You may also use

+ *          this file in order to override the device drivers default settings.

+ *

+ * @addtogroup HAL_CONF

+ * @{

+ */

+

+#ifndef _HALCONF_H_

+#define _HALCONF_H_

+

+#include "mcuconf.h"

+

+/**

+ * @brief   Enables the PAL subsystem.

+ */

+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

+#define HAL_USE_PAL                 TRUE

+#endif

+

+/**

+ * @brief   Enables the ADC subsystem.

+ */

+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

+#define HAL_USE_ADC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the CAN subsystem.

+ */

+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

+#define HAL_USE_CAN                 FALSE

+#endif

+

+/**

+ * @brief   Enables the DAC subsystem.

+ */

+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

+#define HAL_USE_DAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the EXT subsystem.

+ */

+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

+#define HAL_USE_EXT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the GPT subsystem.

+ */

+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

+#define HAL_USE_GPT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the I2C subsystem.

+ */

+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

+#define HAL_USE_I2C                 FALSE

+#endif

+

+/**

+ * @brief   Enables the I2S subsystem.

+ */

+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

+#define HAL_USE_I2S                 FALSE

+#endif

+

+/**

+ * @brief   Enables the ICU subsystem.

+ */

+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

+#define HAL_USE_ICU                 FALSE

+#endif

+

+/**

+ * @brief   Enables the MAC subsystem.

+ */

+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

+#define HAL_USE_MAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the MMC_SPI subsystem.

+ */

+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_MMC_SPI             FALSE

+#endif

+

+/**

+ * @brief   Enables the PWM subsystem.

+ */

+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

+#define HAL_USE_PWM                 FALSE

+#endif

+

+/**

+ * @brief   Enables the RTC subsystem.

+ */

+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

+#define HAL_USE_RTC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SDC subsystem.

+ */

+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

+#define HAL_USE_SDC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SERIAL subsystem.

+ */

+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL              FALSE

+#endif

+

+/**

+ * @brief   Enables the SERIAL over USB subsystem.

+ */

+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL_USB          FALSE

+#endif

+

+/**

+ * @brief   Enables the SPI subsystem.

+ */

+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_SPI                 FALSE

+#endif

+

+/**

+ * @brief   Enables the UART subsystem.

+ */

+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

+#define HAL_USE_UART                FALSE

+#endif

+

+/**

+ * @brief   Enables the USB subsystem.

+ */

+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

+#define HAL_USE_USB                 TRUE

+#endif

+

+/**

+ * @brief   Enables the WDG subsystem.

+ */

+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

+#define HAL_USE_WDG                 FALSE

+#endif

+

+/*===========================================================================*/

+/* USB driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

+#define USB_USE_WAIT                TRUE

+#endif

+

+#endif /* _HALCONF_H_ */

+

+/** @} */

diff --git a/keyboards/chibios_test/teensy_lc_onekey/instructions.md b/keyboards/chibios_test/teensy_lc_onekey/instructions.md
new file mode 100644
index 0000000000..16886a015c
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/instructions.md
@@ -0,0 +1,82 @@
+# Teensy LC, 3.0, 3.1, 3.2 support
+
+These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
+
+You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
+
+Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS). If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `tmk_core/tool/chibios/chibios` (so that the file `tmk_core/tool/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `tmk_core/tool/chibios/chibios-contrib`.
+
+(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.)
+
+(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.)
+
+This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
+
+For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
+
+## About this onekey example
+
+It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
+
+## Credits
+
+TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard).
+
+The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions.
+
+## Features that are not implemented yet
+
+Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
+
+# Matrix programming notes
+
+The notes below explain what commands can be used to examine and set the status of Teensy pins.
+
+## ChibiOS pin manipulation basics
+
+### Pins
+
+Each pin sits on a "port", each of which comprises at most 32 individual pins.
+So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number.
+
+Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number.
+
+### Mode
+
+A MCU pin can be in several modes. The basic command to set a pin mode is
+
+        palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP);
+
+The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW).
+
+### Setting
+
+Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by
+
+        palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+or set LOW by
+
+        palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+Toggling can be done with
+
+        palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+Alternatively, you can use
+
+        palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
+
+where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
+
+### Reading
+
+Reading pin status is done with
+
+        palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
+
+### Further docs
+
+All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).
diff --git a/keyboards/chibios_test/teensy_lc_onekey/led.c b/keyboards/chibios_test/teensy_lc_onekey/led.c
new file mode 100644
index 0000000000..dfa60c1076
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/led.c
@@ -0,0 +1,32 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output high
+        palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
+        palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
+    } else {
+        // Hi-Z
+        palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT);
+    }
+}
diff --git a/keyboards/chibios_test/teensy_lc_onekey/matrix.c b/keyboards/chibios_test/teensy_lc_onekey/matrix.c
new file mode 100644
index 0000000000..7dab04f02b
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/matrix.c
@@ -0,0 +1,163 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * scan matrix
+ */
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "wait.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+#define LED_ON()    do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0)
+#define LED_OFF()   do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
+#define LED_TGL()   do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    //debug
+    debug_matrix = true;
+    LED_ON();
+    wait_ms(500);
+    LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        wait_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            wait_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+/* Column pin configuration
+ */
+static void  init_cols(void)
+{
+    // internal pull-up
+    palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP);
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+    return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0));
+    // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
+}
+
+/* Row pin configuration
+ */
+static void unselect_rows(void)
+{
+    palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z
+}
+
+static void select_row(uint8_t row)
+{
+    (void)row;
+    // Output low to select
+    switch (row) {
+        case 0:
+            palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL);
+            palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5);
+            break;
+    }
+}
diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
new file mode 100644
index 0000000000..c636590197
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
@@ -0,0 +1,55 @@
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#ifndef _MCUCONF_H_

+#define _MCUCONF_H_

+

+#define KL2x_MCUCONF

+

+/*

+ * HAL driver system settings.

+ */

+#if 1

+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */

+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE

+#define KINETIS_PLLCLK_FREQUENCY    96000000UL

+#define KINETIS_SYSCLK_FREQUENCY    48000000UL

+#endif

+

+#if 0

+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */

+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */

+#endif

+

+/*

+ * SERIAL driver system settings.

+ */

+#define KINETIS_SERIAL_USE_UART0              TRUE

+

+/*

+ * USB driver settings

+ */

+#define KINETIS_USB_USE_USB0                  TRUE

+/* Need to redefine this, since the default is for K20x */

+/* This is for Teensy LC; you should comment it out (or change to 5)

+ * for Teensy 3.x */

+#define KINETIS_USB_USB0_IRQ_PRIORITY         2

+

+#endif /* _MCUCONF_H_ */

diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c
new file mode 100644
index 0000000000..b6c4327932
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c
@@ -0,0 +1 @@
+#include "teensy_lc_onekey.h"
diff --git a/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h
new file mode 100644
index 0000000000..ea1c84e2f5
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h
@@ -0,0 +1,4 @@
+#ifndef TEENSY_LC_ONEKEY_H
+#define TEENSY_LC_ONEKEY_H
+#include "chibios_test.h"
+#endif