Reorganize clueboard into a single directory (#1855)

6 files changed, 342 insertions, 0 deletions

diff --git a/keyboards/clueboard/17/clueboard_17.c b/keyboards/clueboard/17/clueboard_17.c
new file mode 100644
index 0000000000..04cc812178
--- /dev/null
+++ b/keyboards/clueboard/17/clueboard_17.c
@@ -0,0 +1,60 @@
+#include "clueboard_17.h"
+
+int pwm_level;
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    matrix_init_user();
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+};
+
+void led_set_kb(uint8_t usb_led)
+{
+    print("led_set\n");
+}
+
+void backlight_init_ports(void)
+{
+    // Set C7 to output
+    DDRC |= (1<<7);
+
+    // Initialize the timer
+    TC4H = 0x03;
+    OCR4C = 0xFF;
+    TCCR4A = 0b10000010;
+    TCCR4B = 0b00000001;
+}
+
+void backlight_set(uint8_t level)
+{
+    // Determine the PWM level
+    switch (level)
+    {
+        case 0:
+            // 33%
+            pwm_level = 0x54;
+            break;
+        case 1:
+            // 66%
+            pwm_level = 0xA8;
+            break;
+        case 2:
+            // 100%
+            pwm_level = 0xFF;
+            break;
+        case 3:
+            // 0%
+            pwm_level = 0x00;
+            break;
+        default:
+            xprintf("Unknown level: %d\n", level);
+    }
+
+    // Write the PWM level to the timer
+    TC4H = pwm_level >> 8;
+    OCR4A = 0xFF & pwm_level;
+}
diff --git a/keyboards/clueboard/17/clueboard_17.h b/keyboards/clueboard/17/clueboard_17.h
new file mode 100644
index 0000000000..5e4a5999e2
--- /dev/null
+++ b/keyboards/clueboard/17/clueboard_17.h
@@ -0,0 +1,36 @@
+#ifndef CLUEPAD_H
+#define CLUEPAD_H
+
+#include "quantum.h"
+
+
+/* Cluepad matrix layout
+ * .-------------------.
+ * |NLCK|   /|   *|   -|
+ * |-------------------|
+ * |   7|   8|   9|    |
+ * |--------------|    |
+ * |   4|   5|   6|   +|
+ * |-------------------|
+ * |   1|   2|   3|    |
+ * |--------------|    |
+ * |        0|   .| Ent|
+ * '-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k33, \
+    k40,      k42 \
+) { \
+    { k00, k01, k02, k03, }, \
+    { k10, k11, k12, k13, }, \
+    { k20, k21, k22, KC_NO, }, \
+    { k30, k31, k32, k33, }, \
+    { k40, KC_NO, k42, KC_NO } \
+}
+
+#endif
diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h
new file mode 100644
index 0000000000..bd64dfd27d
--- /dev/null
+++ b/keyboards/clueboard/17/config.h
@@ -0,0 +1,100 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x2312
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Cluepad with RGB Underlighting
+#define DESCRIPTION     QMK keyboard firmware for Cluepad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+* row: 0  1  2  3  4
+* pin:
+*/
+#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 }
+/* Column pin configuration
+ * col: 0  1  2  3
+ * pin: F4 E6 B1 D2
+ */
+#define MATRIX_COL_PINS { F4, E6, B1, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Number of backlighting levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN F6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* Debug forcibly enabled */
+#define ALWAYS_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/clueboard/17/keymaps/default/keymap.c b/keyboards/clueboard/17/keymaps/default/keymap.c
new file mode 100644
index 0000000000..7a0d518515
--- /dev/null
+++ b/keyboards/clueboard/17/keymaps/default/keymap.c
@@ -0,0 +1,65 @@
+#include "clueboard_17.h"
+
+#include "backlight.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _RS 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * .-------------------.
+   * |NL F|   /|   *|   -|
+   * |-------------------|
+   * |   7|   8|   9|    |
+   * |--------------|    |
+   * |   4|   5|   6|   +|
+   * |-------------------|
+   * |   1|   2|   3|    |
+   * |--------------|    |
+   * |        0|   .| Ent|
+   * '-------------------'
+   */
+[_BL] = KEYMAP(
+  LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7,            KC_P8,   KC_P9,   KC_PPLS, \
+  KC_P4,            KC_P5,   KC_P6, \
+  KC_P1,            KC_P2,   KC_P3,   KC_PENT, \
+  KC_P0,                     KC_PDOT),
+
+  /* Keymap _FL: Function Layer
+   * .-------------------.
+   * |NL F|    |    | Fn0|
+   * |-------------------|
+   * |    | Fn4|    |    |
+   * |--------------|    |
+   * | Fn3|BL_S| Fn2| Fn6|
+   * |-------------------|
+   * |    | Fn5|    |    |
+   * |--------------|    |
+   * |      Fn1|    | Fn7|
+   * '-------------------'
+   */
+[_FL] = KEYMAP(
+  LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, RGB_TOG, \
+  KC_TRNS,          RGB_SAI,    KC_TRNS, RGB_VAI, \
+  RGB_HUD,             BL_STEP, RGB_HUI, \
+  KC_TRNS,          RGB_SAD,    KC_TRNS, RGB_VAD, \
+  RGB_MOD,                      KC_TRNS)
+};
+
+/*enum function_id {
+};*/
+
+const uint16_t PROGMEM fn_actions[] = {
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+  }
+}
+
diff --git a/keyboards/clueboard/17/readme.md b/keyboards/clueboard/17/readme.md
new file mode 100644
index 0000000000..877adc7842
--- /dev/null
+++ b/keyboards/clueboard/17/readme.md
@@ -0,0 +1,16 @@
+# Clueboard 17% (Formerly Cluepad)
+
+![Clueboard 17%](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w)
+
+A basic 17 key numpad PCB.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported:
+  * Cluepad PCB 1.0
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clueboard/17:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk
new file mode 100644
index 0000000000..264aba044d
--- /dev/null
+++ b/keyboards/clueboard/17/rules.mk
@@ -0,0 +1,65 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes	# Console for debug(+400)
+# COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE = yes
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file