Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

19 files changed, 90 insertions, 1270 deletions

diff --git a/keyboards/crkbd/keymaps/like_jis/config.h b/keyboards/crkbd/keymaps/like_jis/config.h
deleted file mode 100644
index a061b4fb09..0000000000
--- a/keyboards/crkbd/keymaps/like_jis/config.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define PREVENT_STUCK_MODIFIERS
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 250
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 27
-#define RGBLIGHT_LIMIT_VAL 120
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
diff --git a/keyboards/crkbd/keymaps/like_jis/keymap.c b/keyboards/crkbd/keymaps/like_jis/keymap.c
deleted file mode 100644
index 41df6330f5..0000000000
--- a/keyboards/crkbd/keymaps/like_jis/keymap.c
+++ /dev/null
@@ -1,291 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-#include "oled_helper.h"
-
-extern keymap_config_t keymap_config;
-
-extern uint8_t is_master;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-enum layer_number {
-  _BASE = 0,
-  _LOWER,
-  _RAISE,
-  _ADJUST,
-};
-
-enum custom_keycodes {
-  LOWER = SAFE_RANGE,
-  RAISE,
-  ADJUST,
-  KANJI,
-  RGBRST
-};
-
-enum tapdances{
-  TD_CODO = 0,
-  // TD_MNUB,
-};
-
-// Layer Mode aliases
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_KANJI KANJI
-
-#define KC_RST   RESET
-#define KC_LRST  RGBRST
-#define KC_LTOG  RGB_TOG
-#define KC_LHUI  RGB_HUI
-#define KC_LHUD  RGB_HUD
-#define KC_LSAI  RGB_SAI
-#define KC_LSAD  RGB_SAD
-#define KC_LVAI  RGB_VAI
-#define KC_LVAD  RGB_VAD
-#define KC_LMOD  RGB_MOD
-#define KC_KNRM  AG_NORM
-#define KC_KSWP  AG_SWAP
-
-#define KC_TBSF  LSFT_T(KC_TAB)
-// #define KC_SPSF  LSFT_T(KC_SPC)
-#define KC_ALAP  LALT_T(KC_APP)
-
-#define KC_CODO  TD(TD_CODO)
-// #define KC_MNUB  TD(TD_MNUB)
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT),
-  // [TD_MNUB] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, LSFT(KC_RO)),
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_BASE] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  MINS,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       TBSF,     A,     S,     D,     F,     G,                      H,     J,     K,     L,    UP,   ENT,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      LCTRL,     Z,     X,     C,     V,     B,                      N,     M,  CODO,  LEFT,  DOWN,  RGHT,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                   LGUI, LOWER,  BSPC,      SPC, RAISE,  ALAP \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_LOWER] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-      _____,    F1,    F2,    F3,    F4,    F5,                  XXXXX,  MINS,   EQL,  JYEN,  LBRC,  RBRC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      _____,    F6,    F7,    F8,    F9,   F10,                  XXXXX, XXXXX, XXXXX,  SCLN,  QUOT,  BSLS,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      _____,   F11,   F12,   TAB, KANJI,   ENT,                  XXXXX, XXXXX,  COMM,   DOT,  SLSH,    RO,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  _____, _____,   DEL,    _____, _____,   APP \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_RAISE] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-      _____,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,  PSLS,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   QUOT,     4,     5,     6,  PPLS,  PAST,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                      0,     1,     2,     3,   DOT,  PMNS,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  _____, _____,  BSPC,    _____, _____,  LALT \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_ADJUST] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-      _____,    RST,  LRST,  KNRM, KSWP, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+-------+------+------+------+-----|                |------+------+------+------+------+------|
-      _____,   LTOG,  LHUI,  LSAI, LVAI, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX,  PGUP, XXXXX,\
-  //|------+-------+------+------+------+-----|                |------+------+------+------+------+------|
-      _____,   LMOD,  LHUD,  LSAD, LVAD, XXXXX,                  XXXXX, XXXXX, XXXXX,  HOME,  PGDN,   END,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  _____, _____, XXXXX,    _____, _____, XXXXX \
-                              //`--------------------'  `--------------------'
-  )
-};
-
-#define L_BASE _BASE
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-
-#ifdef SSD1306OLED
-typedef struct {
-  uint8_t state;
-  char name[8];
-}LAYER_DISPLAY_NAME;
-
-#define LAYER_DISPLAY_MAX 5
-const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = {
-  {L_BASE, "Base"},
-  {L_BASE + 1, "Base"},
-  {L_LOWER, "Lower"},
-  {L_RAISE, "Raise"},
-  {L_ADJUST_TRI, "Adjust"}
-};
-
-static inline const char* get_leyer_status(void) {
-
-  for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) {
-    if (layer_state == 0 && layer_display_name[i].state == default_layer_state) {
-
-      return layer_display_name[i].name;
-    } else if (layer_state != 0 && layer_display_name[i].state == layer_state) {
-
-      return layer_display_name[i].name;
-    }
-  }
-
-  return "?";
-}
-
-static char layer_status_buf[24] = "Layer state ready.\n";
-static inline void update_keymap_status(void) {
-
-  snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n",
-    keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
-}
-
-static inline void render_keymap_status(struct CharacterMatrix *matrix) {
-
-  matrix_write(matrix, layer_status_buf);
-}
-
-#define UPDATE_KEYMAP_STATUS() update_keymap_status()
-#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
-
-#else
-
-#define UPDATE_KEYMAP_STATUS()
-#define RENDER_KEYMAP_STATUS(a)
-
-#endif
-
-static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-
-  pressed ? layer_on(layer1) : layer_off(layer1);
-  IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
-}
-
-int RGB_current_mode;
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
-  UPDATE_KEY_STATUS(keycode, record);
-
-  bool result = false;
-  switch (keycode) {
-    case LOWER:
-      update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
-      break;
-    case RAISE:
-      update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
-        break;
-    case KANJI:
-      if (record->event.pressed) {
-        if (keymap_config.swap_lalt_lgui == false) {
-          register_code(KC_LANG2);
-        } else {
-          SEND_STRING(SS_LALT("`"));
-        }
-      } else {
-        unregister_code(KC_LANG2);
-      }
-      break;
-    #ifdef RGBLIGHT_ENABLE
-      case RGB_MOD:
-          if (record->event.pressed) {
-            rgblight_mode(RGB_current_mode);
-            rgblight_step();
-            RGB_current_mode = rgblight_config.mode;
-          }
-        break;
-      case RGBRST:
-          if (record->event.pressed) {
-            eeconfig_update_rgblight_default();
-            rgblight_enable();
-            RGB_current_mode = rgblight_config.mode;
-          }
-        break;
-    #endif
-    default:
-      result = true;
-      break;
-  }
-
-  UPDATE_KEYMAP_STATUS();
-  return result;
-}
-
-void matrix_init_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-    RGB_current_mode = rgblight_config.mode;
-    UPDATE_KEYMAP_STATUS();
-  #endif
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    iota_gfx_init(!has_usb()); // turns on the display
-  #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
-  iota_gfx_task();  // this is what updates the display continuously
-}
-
-static inline void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static inline void render_status(struct CharacterMatrix *matrix) {
-
-  UPDATE_LED_STATUS();
-  RENDER_LED_STATUS(matrix);
-  RENDER_KEYMAP_STATUS(matrix);
-  UPDATE_LOCK_STATUS();
-  RENDER_LOCK_STATUS(matrix);
-  RENDER_KEY_STATUS(matrix);
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-
-  #if DEBUG_TO_SCREEN
-    if (debug_enable) {
-      return;
-    }
-  #endif
-
-  matrix_clear(&matrix);
-  if (is_master) {
-    render_status(&matrix);
-  } else {
-    RENDER_LOGO(&matrix);
-  }
-
-  matrix_update(&display, &matrix);
-}
-
-#endif
diff --git a/keyboards/crkbd/keymaps/like_jis/oled_helper.c b/keyboards/crkbd/keymaps/like_jis/oled_helper.c
deleted file mode 100644
index 500d3c0dc1..0000000000
--- a/keyboards/crkbd/keymaps/like_jis/oled_helper.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifdef SSD1306OLED
-#include QMK_KEYBOARD_H
-#include "ssd1306.h"
-
-void render_logo(struct CharacterMatrix *matrix) {
-
-  const char logo_buf[]={
-    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
-    0};
-
-  matrix_write(matrix, logo_buf);
-}
-
-static char keylog_buf[24] = "Key state ready.";
-const char code_to_name[60] = {
-    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
-    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
-    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
-    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
-    'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ',
-    ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '};
-
-void update_key_status(uint16_t keycode, keyrecord_t *record) {
-
-  if (!record->event.pressed) return;
-
-  char name = (keycode < 60) ? code_to_name[keycode] : ' ';
-  snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c",
-          record->event.key.row, record->event.key.col,
-          (uint16_t)keycode, name);
-}
-
-void render_key_status(struct CharacterMatrix *matrix) {
-
-  matrix_write(matrix, keylog_buf);
-}
-
-static char lock_buf[24] = "Lock state ready.\n";
-void update_lock_status(void) {
-
-  uint8_t leds = host_keyboard_leds();
-  char *num_lock = (leds & (1<<USB_LED_NUM_LOCK)) ? "Num" : "";
-  char *caps_lock = (leds & (1<<USB_LED_CAPS_LOCK)) ? "Caps" : "";
-  char *scrl_lock = (leds & (1<<USB_LED_SCROLL_LOCK)) ? "Scrn" : "";
-  snprintf(lock_buf, sizeof(lock_buf) - 1, "Lock:%s %s %s\n",
-          num_lock, caps_lock, scrl_lock);
-}
-
-void render_lock_status(struct CharacterMatrix *matrix) {
-
-  matrix_write(matrix, lock_buf);
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-static char led_buf[24] = "LED state ready.\n";
-rgblight_config_t rgblight_config_bak;
-void update_led_status(void) {
-
-  if (rgblight_config_bak.enable != rgblight_config.enable ||
-      rgblight_config_bak.mode != rgblight_config.mode ||
-      rgblight_config_bak.hue != rgblight_config.hue ||
-      rgblight_config_bak.sat != rgblight_config.sat ||
-      rgblight_config_bak.val != rgblight_config.val
-  ) {
-    snprintf(led_buf, sizeof(led_buf) - 1, "LED%c:%2d hsv:%2d %2d %2d\n",
-      rgblight_config.enable ? '*' : '.', (uint8_t)rgblight_config.mode,
-      (uint8_t)(rgblight_config.hue / RGBLIGHT_HUE_STEP),
-      (uint8_t)(rgblight_config.sat / RGBLIGHT_SAT_STEP),
-      (uint8_t)(rgblight_config.val / RGBLIGHT_VAL_STEP));
-      rgblight_config_bak = rgblight_config;
-  }
-}
-
-void render_led_status(struct CharacterMatrix *matrix) {
-
-  matrix_write(matrix, led_buf);
-}
-#endif
-#endif
diff --git a/keyboards/crkbd/keymaps/like_jis/oled_helper.h b/keyboards/crkbd/keymaps/like_jis/oled_helper.h
deleted file mode 100644
index 44628a5261..0000000000
--- a/keyboards/crkbd/keymaps/like_jis/oled_helper.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifdef SSD1306OLED
-
-void render_logo(struct CharacterMatrix *matrix);
-void update_key_status(uint16_t keycode, keyrecord_t *record);
-void render_key_status(struct CharacterMatrix *matrix);
-void update_lock_status(void);
-void render_lock_status(struct CharacterMatrix *matrix);
-
-#define RENDER_LOGO(a) render_logo(a)
-#define UPDATE_KEY_STATUS(a, b) update_key_status(a, b)
-#define RENDER_KEY_STATUS(a) render_key_status(a)
-#define UPDATE_LOCK_STATUS() update_lock_status()
-#define RENDER_LOCK_STATUS(a) render_lock_status(a)
-
-#ifdef RGBLIGHT_ENABLE
-  void update_led_status(void);
-  void render_led_status(struct CharacterMatrix *matrix);
-  #define UPDATE_LED_STATUS() update_led_status()
-  #define RENDER_LED_STATUS(a) render_led_status(a)
-#else
-  #define UPDATE_LED_STATUS()
-  #define RENDER_LED_STATUS(a)
-#endif
-
-#else
-
-#define RENDER_LOGO(a)
-#define UPDATE_KEY_STATUS(a, b)
-#define RENDER_KEY_STATUS(a)
-#define UPDATE_LOCK_STATUS()
-#define RENDER_LOCK_STATUS(a)
-#define UPDATE_LED_STATUS()
-#define RENDER_LED_STATUS(a)
-
-#endif
diff --git a/keyboards/crkbd/keymaps/like_jis/rules.mk b/keyboards/crkbd/keymaps/like_jis/rules.mk
deleted file mode 100644
index 92f4693aa7..0000000000
--- a/keyboards/crkbd/keymaps/like_jis/rules.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-TAP_DANCE_ENABLE = yes
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-Link_Time_Optimization = yes # if firmware size over limit, try this option
-
-ifeq ($(strip $(Link_Time_Optimization)),yes)
-    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
-endif
-
-# If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        oled_helper.c \
diff --git a/keyboards/crkbd/keymaps/omgvee/config.h b/keyboards/crkbd/keymaps/omgvee/config.h
deleted file mode 100644
index 5699c3bebe..0000000000
--- a/keyboards/crkbd/keymaps/omgvee/config.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 100
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 27
-#define RGBLIGHT_LIMIT_VAL 120
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-#define BACKLIGHT_LEVELS 10
-
-#undef PRODUCT
-#define PRODUCT "Vee's hotswappable Helidox/Corne/CRKBD split keeb"
-
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
diff --git a/keyboards/crkbd/keymaps/omgvee/keymap.c b/keyboards/crkbd/keymaps/omgvee/keymap.c
deleted file mode 100644
index 2c33d8b8c5..0000000000
--- a/keyboards/crkbd/keymaps/omgvee/keymap.c
+++ /dev/null
@@ -1,242 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 3
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-  BACKLIT,
-  RGBRST
-};
-
-enum macro_keycodes {
-  KC_SAMPLEMACRO,
-};
-
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-#define KC_RST   RESET
-#define KC_ERST  EEPROM_RESET
-#define KC_LRST  RGBRST
-#define KC_LTOG  RGB_TOG
-#define KC_LHUI  RGB_HUI
-#define KC_LHUD  RGB_HUD
-#define KC_LSAI  RGB_SAI
-#define KC_LSAD  RGB_SAD
-#define KC_LVAI  RGB_VAI
-#define KC_LVAD  RGB_VAD
-#define KC_LMOD  RGB_MOD
-#define KC_SFCPS SFT_T(KC_CAPS)
-#define KC_CTLTB CTL_T(KC_TAB)
-#define KC_GUIEI GUI_T(KC_LANG2)
-#define KC_ALTKN ALT_T(KC_LANG1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      SFCPS,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,  RSFT,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   ENT,      SPC, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_LOWER] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        GRV,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,  BSPC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      SFCPS,    F1,    F2,    F3,    F4,    F5,                     F6,    F7,    F8,    F9,   F10,   ENT,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,   F11,   F12,   F13,   F14,   F15,                    F16,   F17,   F18,   F19,   F20,  RSFT,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   ENT,      SPC, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_RAISE] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        TAB,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,   DEL,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      SFCPS, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   MINS,   EQL,  LCBR,  RCBR,  PIPE,  BSLS,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB, XXXXX,  VOLD,  VOLU,  MUTE,  MPLY,                   UNDS,  PLUS,  LBRC,  RBRC,  SLSH,  RSFT,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   ENT,      SPC, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_ADJUST] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, ERST,                    MNXT,  MPRV,  MFFD,  MRWD, XXXXX,  EJCT,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI,  PGUP, HOME,                    LEFT,  DOWN,    UP, RIGHT, XXXXX,   INS,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD,  PGDN,  END,                    BRID,  BRIU,  VOLD,  VOLU,  MUTE,  MPLY,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   ENT,      SPC, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  )
-};
-
-int RGB_current_mode;
-
-// Setting ADJUST layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
-void matrix_init_user(void) {
-    #ifdef RGBLIGHT_ENABLE
-      RGB_current_mode = rgblight_config.mode;
-    #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
-const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
-
-// const char *read_mode_icon(bool swap);
-// const char *read_host_led_state(void);
-// void set_timelog(void);
-// const char *read_timelog(void);
-
-void matrix_scan_user(void) {
-   iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
-    // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    //matrix_write_ln(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
-  } else {
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-#ifdef SSD1306OLED
-    set_keylog(keycode, record);
-#endif
-    // set_timelog();
-  }
-
-  switch (keycode) {
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-        if (record->event.pressed) {
-          layer_on(_ADJUST);
-        } else {
-          layer_off(_ADJUST);
-        }
-        return false;
-        break;
-    case RGB_MOD:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          rgblight_mode(RGB_current_mode);
-          rgblight_step();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      return false;
-      break;
-    case RGBRST:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          eeconfig_update_rgblight_default();
-          rgblight_enable();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/crkbd/keymaps/omgvee/readme.md b/keyboards/crkbd/keymaps/omgvee/readme.md
deleted file mode 100644
index bc316c2a35..0000000000
--- a/keyboards/crkbd/keymaps/omgvee/readme.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# Reade.md for what I want from my HeliDox(CRKBD) layout
-======================================================
-
-
-![My beloved HeliDox keeb](https://i.imgur.com/NbVAB3g.jpg)
-
-- media keys and media controls
-- in-switch LED intensity controls (+/-)
-- underglow RGB hue/color controls
-- underglow RGB intensity controls
-- familiar key arrangement with Enter and symbols on the usual keys (to the right hand side)
-- navigation keys should be the vim ones really;
-- arrow keys on one layer(most likely on the ADJUST one)
-
-See keymap.c for layouts
-
-
-P.S> this lil' keeb is so addictive I have no words, really...
diff --git a/keyboards/crkbd/keymaps/omgvee/rules.mk b/keyboards/crkbd/keymaps/omgvee/rules.mk
deleted file mode 100644
index 88e43aa99f..0000000000
--- a/keyboards/crkbd/keymaps/omgvee/rules.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-EXTRAFLAGS += -flto
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-# If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        ./lib/rgb_state_reader.c \
-        ./lib/layer_state_reader.c \
-        ./lib/logo_reader.c \
-        ./lib/keylogger.c \
-        # ./lib/mode_icon_reader.c \
-        # ./lib/host_led_state_reader.c \
-        # ./lib/timelogger.c \
diff --git a/keyboards/crkbd/keymaps/rs/keymap.c b/keyboards/crkbd/keymaps/rs/keymap.c
index 135ccb076c..7e2a2e066e 100644
--- a/keyboards/crkbd/keymaps/rs/keymap.c
+++ b/keyboards/crkbd/keymaps/rs/keymap.c
@@ -2,37 +2,37 @@
 #include "rs.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc(
+  [_QWERTY] = LAYOUT(
   //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,EQL ,
+     KC_TAB , KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,                KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_EQL ,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     ESCC, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+     KC_ESCC, KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,                KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_QUOT,
   //|----+----+----+----+----+----+              |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,                N  , M  ,COMM,DOT ,SLSH,ENTS,
+     KC_LSFT, KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,                KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,KC_ENTS,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                       LALT,LGUI,SPC ,         BSPC,CODE,FN
+                       KC_LALT,KC_LGUI,KC_SPC ,         KC_BSPC,KC_CODE,KC_FN
   //                  `----+----+----'        `+---+----+----'c
   ),
-  [_CODE] = LAYOUT_kc(
+  [_CODE] = LAYOUT(
   //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     GRV ,EXLM, AT ,HASH, DLR,PERC,               CIRC,LPLT,ASTR,RPGT,NEQL,    ,
+     KC_GRV ,KC_EXLM, KC_AT ,KC_HASH, KC_DLR,KC_PERC,               KC_CIRC,KC_LPLT,KC_ASTR,KC_RPGT,KC_NEQL,_______,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         , 1  , 2  , 3  , 4  , 5  ,               MINS,LBRC, UP ,RBRC,    ,BSLS,
+     _______, KC_1  , KC_2  , KC_3  , KC_4  , KC_5  ,               KC_MINS,KC_LBRC, KC_UP ,KC_RBRC,_______,KC_BSLS,
   //|----+----+----+----+----+----+              |----+----+----+----+----+----|
-         , 6  , 7  , 8  , 9  , 0  ,               AMPR,LEFT,DOWN,RGHT,    ,PIPE,
+     _______, KC_6  , KC_7  , KC_8  , KC_9  , KC_0  ,               KC_AMPR,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_PIPE,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                           ,    ,DOT ,             ,    ,
+                       _______,_______,KC_DOT ,         _______,_______,_______
   //                  `----+----+----'        `----+----+----'
   ),
-  [_FN] = LAYOUT_kc(
+  [_FN] = LAYOUT(
   //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-         , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 , F10, F11,
+     _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,                KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10, KC_F11,
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     LTOG,LHUI,LSAI,LVAI,LRST,BRMU,               VOLU,    ,PGUP,    ,    ,    ,
+     KC_LTOG,KC_LHUI,KC_LSAI,KC_LVAI,KC_LRST,KC_BRMU,               KC_VOLU,_______,KC_PGUP,_______,_______,_______,
   //|----+----+----+----+----+----+              |----+----+----+----+----+----|
-     LMOD,LHUD,LSAD,LVAD,RST ,BRMD,               VOLD,CTRA,PGDN,CTRE,    ,    ,
+     KC_LMOD,KC_LHUD,KC_LSAD,KC_LVAD,KC_RST ,KC_BRMD,               KC_VOLD,KC_CTRA,KC_PGDN,KC_CTRE,_______,_______,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                           ,    ,    ,         MUTE,    ,     
+                       _______,_______,_______,         KC_MUTE,_______,_______
   //                  `----+----+----'        `----+----+----'
   ),
 };
diff --git a/keyboards/crkbd/keymaps/thefrey/README.md b/keyboards/crkbd/keymaps/thefrey/README.md
deleted file mode 100644
index 69b20cfcd6..0000000000
--- a/keyboards/crkbd/keymaps/thefrey/README.md
+++ /dev/null
@@ -1,16 +0,0 @@
-![the-frey-layout](https://raw.githubusercontent.com/the-frey/the-frey.github.com/master/assets/images/keyboard-layout.jpg)
-
-# Keyboard layout by the-frey
-
-This is a layout that allows access to all the paren keys easily, has a tab on the lower layer (for SUPER-TAB app switching) and some utility features like PGUP/PGDOWN and HOME/END.
-
-In addition, the arrows are on the lower layer and are bound to the vim keys (h,j,k,l). I've found this a productive layout for programming in emacs and hopefully you will too. 
-
-The layout image above shows the keymap, with each key marked with all three layers:
-
-- The top indicates the raise layer
-- The middle indicates the default layer
-- The bottom indicates the lower layer
-
-All the keys respond as you'd expect to the 'shift' key - i.e. on a UK/GB keyboard, `/` becomes `?` and so on.
-
diff --git a/keyboards/crkbd/keymaps/thefrey/config.h b/keyboards/crkbd/keymaps/thefrey/config.h
deleted file mode 100644
index cee901fc81..0000000000
--- a/keyboards/crkbd/keymaps/thefrey/config.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-#define FORCE_NKRO
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 100
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 27
-#define RGBLIGHT_LIMIT_VAL 120
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
diff --git a/keyboards/crkbd/keymaps/thefrey/keymap.c b/keyboards/crkbd/keymaps/thefrey/keymap.c
deleted file mode 100644
index 9a142a924a..0000000000
--- a/keyboards/crkbd/keymaps/thefrey/keymap.c
+++ /dev/null
@@ -1,243 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
-  #include "ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 3
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-  BACKLIT,
-  RGBRST
-};
-
-enum macro_keycodes {
-  KC_SAMPLEMACRO,
-};
-
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-#define KC_RST   RESET
-#define KC_LRST  RGBRST
-#define KC_LTOG  RGB_TOG
-#define KC_LHUI  RGB_HUI
-#define KC_LHUD  RGB_HUD
-#define KC_LSAI  RGB_SAI
-#define KC_LSAD  RGB_SAD
-#define KC_LVAI  RGB_VAI
-#define KC_LVAD  RGB_VAD
-#define KC_LMOD  RGB_MOD
-#define KC_CTLTB CTL_T(KC_TAB)
-#define KC_GUIEI GUI_T(KC_LANG2)
-#define KC_ALTKN ALT_T(KC_LANG1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,  RSFT,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_LOWER] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        TAB,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,  BSPC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB, MUTE,   VOLD,  VOLU,  PGUP,  PGDN,                   LEFT,  DOWN,    UP, RIGHT,  HOME,   END,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT,    F1,    F2,    F3,    F4,    F5,                     F6,    F7,    F8,    F9,   F10, XXXXX,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_RAISE] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,  BSPC,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   MINS,   EQL,  LCBR,  RCBR,  PIPE,   GRV,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   UNDS,  PLUS,  LBRC,  RBRC,  BSLS,  TILD,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_ADJUST] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
-                              //`--------------------'  `--------------------'
-  )
-};
-
-int RGB_current_mode;
-
-// Setting ADJUST layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
-void matrix_init_user(void) {
-    #ifdef RGBLIGHT_ENABLE
-      RGB_current_mode = rgblight_config.mode;
-    #endif
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
-    #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
-const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
-
-// const char *read_mode_icon(bool swap);
-// const char *read_host_led_state(void);
-// void set_timelog(void);
-// const char *read_timelog(void);
-
-void matrix_scan_user(void) {
-   iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
-  if (is_master) {
-    // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
-    matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
-    //matrix_write_ln(matrix, read_host_led_state());
-    //matrix_write_ln(matrix, read_timelog());
-  } else {
-    matrix_write(matrix, read_logo());
-  }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-void iota_gfx_task_user(void) {
-  struct CharacterMatrix matrix;
-  matrix_clear(&matrix);
-  matrix_render_user(&matrix);
-  matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-#ifdef SSD1306OLED
-    set_keylog(keycode, record);
-#endif
-    // set_timelog();
-  }
-
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-        if (record->event.pressed) {
-          layer_on(_ADJUST);
-        } else {
-          layer_off(_ADJUST);
-        }
-        return false;
-        break;
-    case RGB_MOD:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          rgblight_mode(RGB_current_mode);
-          rgblight_step();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      return false;
-      break;
-    case RGBRST:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          eeconfig_update_rgblight_default();
-          rgblight_enable();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/crkbd/keymaps/thefrey/rules.mk b/keyboards/crkbd/keymaps/thefrey/rules.mk
deleted file mode 100644
index 16deaf45d1..0000000000
--- a/keyboards/crkbd/keymaps/thefrey/rules.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-# If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        ./lib/rgb_state_reader.c \
-        ./lib/layer_state_reader.c \
-        ./lib/logo_reader.c \
-        ./lib/keylogger.c \
-        # ./lib/mode_icon_reader.c \
-        # ./lib/host_led_state_reader.c \
-        # ./lib/timelogger.c \
diff --git a/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c b/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c
index c67958aa14..0011b1143a 100755
--- a/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c
+++ b/keyboards/crkbd/keymaps/thumb_ctrl/keymap.c
@@ -62,51 +62,51 @@ enum custom_keycodes {
 #define KC_ALTDL ALT_T(KC_DEL)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc(
+  [_QWERTY] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,
+        KC_ESC,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,                      KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,
+      KC_CTLTB,     KC_A,     KC_S,     KC_D,     KC_F,     KC_G,                      KC_H,     KC_J,     KC_K,     KC_L,  KC_SCLN,  KC_QUOT,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,   ENT,
+       KC_LSFT,     KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,                      KC_N,     KC_M,  KC_COMM,   KC_DOT,  KC_SLSH,   KC_ENT,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  ALTSP, LOWER, GUIEN,    SFTJP, RAISE, ALTDL
+                                  KC_ALTSP, KC_LOWER, KC_GUIEN,    KC_SFTJP, KC_RAISE, KC_ALTDL
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT_kc(
+  [_LOWER] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-           ,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,      ,
+       _______,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                      KC_6,     KC_7,     KC_8,     KC_9,     KC_0,  _______,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-           ,  HOME,   END,  PGDN,  PGUP,   F11,                   LEFT,  DOWN,    UP,  RGHT,   F12,  PIPE,
+       _______,  KC_HOME,   KC_END,  KC_PGDN,  KC_PGUP,   KC_F11,                   KC_LEFT,  KC_DOWN,    KC_UP,  KC_RGHT,   KC_F12,  KC_PIPE,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-           ,    F1,    F2,    F3,    F4,    F5,                     F6,    F7,    F8,    F9,   F10,      ,
+       _______,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                     KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10,  _______,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                       ,      ,      ,         ,      ,       
+                                   _______,  _______,  _______,     _______,  _______, _______
                               //`--------------------'  `--------------------'
   ),
 
-  [_RAISE] = LAYOUT_kc(
+  [_RAISE] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-           ,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,      ,
+       _______,  KC_EXLM,    KC_AT,  KC_HASH,   KC_DLR,  KC_PERC,                   KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-           , XXXXX, XXXXX, XXXXX, XXXXX,  PSCR,                    GRV,  MINS,  PLUS,  LCBR,  RCBR,  BSLS,
+       _______, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,  KC_PSCR,                    KC_GRV,  KC_MINS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_BSLS,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-           , XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   TILD,  UNDS,   EQL,  LBRC,  RBRC,      ,
+       _______, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,                   KC_TILD,  KC_UNDS,   KC_EQL,  KC_LBRC,  KC_RBRC,  _______,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                       ,      ,      ,         ,      ,       
+                                   _______,  _______,  _______,     _______,  _______, _______
                               //`--------------------'  `--------------------'
   ),
 
-  [_ADJUST] = LAYOUT_kc(
+  [_ADJUST] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+        KC_RST,  KC_LRST, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LTOG,  KC_LHUI,  KC_LSAI,  KC_LVAI, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LMOD,  KC_LHUD,  KC_LSAD,  KC_LVAD, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN 
+                                  KC_GUIEI, KC_LOWER,   KC_SPC,      KC_ENT, KC_RAISE, KC_ALTKN 
                               //`--------------------'  `--------------------'
   )
 };
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
index 48f60419fb..0bdc9d2658 100644
--- a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
@@ -31,8 +31,6 @@ enum custom_keycodes {
   SCRL
 };
 
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
 #define KC_LOWER LOWER
 #define KC_RAISE RAISE
 #define KC_RST   RESET
@@ -57,51 +55,51 @@ enum custom_keycodes {
 #define KC_SCRL   SCRL
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc(
+  [_QWERTY] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,
+        KC_ESC,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,                      KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-        TAB,  CTLA,     S,     D,     F,     G,                      H,     J,     K,     L, CTLSC,  QUOT,
+        KC_TAB,  KC_CTLA,     KC_S,     KC_D,     KC_F,     KC_G,                      KC_H,     KC_J,     KC_K,     KC_L, KC_CTLSC,  KC_QUOT,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      GRAVE,  SFTZ,  WINX,     C,     V,     B,                      N,     M,  COMM, WINDO, SFTSL,BSLASH,
+      KC_GRAVE,  KC_SFTZ,  KC_WINX,     KC_C,     KC_V,     KC_B,                      KC_N,     KC_M,  KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLASH,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT_kc(
+  [_LOWER] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC, XXXXX,  PGDN,  PSCR,  PGUP,  LBRC,                   RBRC,     7,     8,     9, XXXXX, XXXXX,
+        KC_ESC, XXXXXXX,  KC_PGDN,  KC_PSCR,  KC_PGUP,  KC_LBRC,                   KC_RBRC,     KC_7,     KC_8,     KC_9, XXXXXXX, XXXXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX, LCTRL,  PLUS,  MINS,   EQL,  LPRN,                   RPRN,     4,     5,     6, RCTRL, XXXXX,
+      XXXXXXX, KC_LCTRL,  KC_PLUS,  KC_MINS,   KC_EQL,  KC_LPRN,                   KC_RPRN,     KC_4,     KC_5,     KC_6, KC_RCTRL, XXXXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX,  LSFT,  HOME, XXXXX,   END,  LCBR,                   RCBR,     1,     2,     3,  RSFT, XXXXX,
+      XXXXXXX,  KC_LSFT,  KC_HOME, XXXXXXX,   KC_END,  KC_LCBR,                   KC_RCBR,     KC_1,     KC_2,     KC_3,  KC_RSFT, XXXXXXX,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT,     0
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT,     KC_0
                               //`--------------------'  `--------------------'
   ),
 
-  [_RAISE] = LAYOUT_kc(
+  [_RAISE] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC, XXXXX,    F7,    F8,    F9,   F10,                   BTN2,  BTN2,  MNXT,  MPRV,  MPLY,  MSTP,
+        KC_ESC, XXXXXXX,    KC_F7,    KC_F8,    KC_F9,   KC_F10,                   KC_BTN2,  KC_BTN2,  KC_MNXT,  KC_MPRV,  KC_MPLY,  KC_MSTP,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX, LCTRL,    F4,    F5,    F6,   F11,                   LEFT,  DOWN,    UP, RIGHT, RCTRL, XXXXX,
+      XXXXXXX, KC_LCTRL,    KC_F4,    KC_F5,    KC_F6,   KC_F11,                   KC_LEFT,  KC_DOWN,    KC_UP, KC_RIGHT, KC_RCTRL, XXXXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX,  LSFT,    F1,    F2,    F3,   F12,                  XXXXX, XXXXX,  VOLU,  VOLD,  MUTE,  RSFT,
+      XXXXXXX,  KC_LSFT,    KC_F1,    KC_F2,    KC_F3,   KC_F12,                  XXXXXXX, XXXXXXX,  KC_VOLU,  KC_VOLD,  KC_MUTE,  KC_RSFT,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   ),
 
-  [_ADJUST] = LAYOUT_kc(
+  [_ADJUST] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,   RST,
+        KC_RST,  KC_LRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   KC_RST,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LTOG,  KC_LHUI,  KC_LSAI,  KC_LVAI, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LMOD,  KC_LHUD,  KC_LSAD,  KC_LVAD, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   )
 };
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
index 8749f7a686..dc176a9fdf 100644
--- a/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
@@ -60,51 +60,51 @@ enum custom_keycodes {
 #define KC_SCRL   SCRL
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc(
+  [_QWERTY] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,
+        KC_ESC,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,                      KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSPC,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-        TAB,  CTLA,     S,     D,     F,     G,                      H,     J,     K,     L, CTLSC,  QUOT,
+        KC_TAB,  KC_CTLA,     KC_S,     KC_D,     KC_F,     KC_G,                      KC_H,     KC_J,     KC_K,     KC_L, KC_CTLSC,  KC_QUOT,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      GRAVE,  SFTZ,  WINX,     C,     V,     B,                      N,     M,  COMM, WINDO, SFTSL,BSLASH,
+      KC_GRAVE,  KC_SFTZ,  KC_WINX,     KC_C,     KC_V,     KC_B,                      KC_N,     KC_M,  KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLASH,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT_kc(
+  [_LOWER] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC, XXXXX,  PGDN,  PSCR,  PGUP,  LBRC,                   RBRC,     7,     8,     9, XXXXX, XXXXX,
+        KC_ESC, KC_XXXXX,  KC_PGDN,  KC_PSCR,  KC_PGUP,  KC_LBRC,                   KC_RBRC,     KC_7,     KC_8,     KC_9, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX, LCTRL,  PLUS,  MINS,   EQL,  LPRN,                   RPRN,     4,     5,     6, RCTRL, XXXXX,
+      KC_XXXXX, KC_LCTRL,  KC_PLUS,  KC_MINS,   KC_EQL,  KC_LPRN,                   KC_RPRN,     KC_4,     KC_5,     KC_6, KC_RCTRL, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX,  LSFT,  HOME, XXXXX,   END,  LCBR,                   RCBR,     1,     2,     3,  RSFT, XXXXX,
+      KC_XXXXX,  KC_LSFT,  KC_HOME, KC_XXXXX,   KC_END,  KC_LCBR,                   KC_RCBR,     KC_1,     KC_2,     KC_3,  KC_RSFT, KC_XXXXX,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT,     0
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT,     KC_0
                               //`--------------------'  `--------------------'
   ),
 
-  [_RAISE] = LAYOUT_kc(
+  [_RAISE] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC, XXXXX,    F7,    F8,    F9,   F10,                   BTN2,  BTN2,  MNXT,  MPRV,  MPLY,  MSTP,
+        KC_ESC, KC_XXXXX,    KC_F7,    KC_F8,    KC_F9,   KC_F10,                   KC_BTN2,  KC_BTN2,  KC_MNXT,  KC_MPRV,  KC_MPLY,  KC_MSTP,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX, LCTRL,    F4,    F5,    F6,   F11,                   LEFT,  DOWN,    UP, RIGHT, RCTRL, XXXXX,
+      KC_XXXXX, KC_LCTRL,    KC_F4,    KC_F5,    KC_F6,   KC_F11,                   KC_LEFT,  KC_DOWN,    KC_UP, KC_RIGHT, KC_RCTRL, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      XXXXX,  LSFT,    F1,    F2,    F3,   F12,                  XXXXX, XXXXX,  VOLU,  VOLD,  MUTE,  RSFT,
+      KC_XXXXX,  KC_LSFT,    KC_F1,    KC_F2,    KC_F3,   KC_F12,                  KC_XXXXX, KC_XXXXX,  KC_VOLU,  KC_VOLD,  KC_MUTE,  KC_RSFT,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   ),
 
-  [_ADJUST] = LAYOUT_kc(
+  [_ADJUST] = LAYOUT(
   //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,   RST,
+        KC_RST,  KC_LRST, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,   KC_RST,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LTOG,  KC_LHUI,  KC_LSAI,  KC_LVAI, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+       KC_LMOD,  KC_LHUD,  KC_LSAD,  KC_LVAD, KC_XXXXX, KC_XXXXX,                  KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  LOWER,   SPC,  SCRL,    MBTN1,   ENT, RAISE
+                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                               //`--------------------'  `--------------------'
   )
 };
diff --git a/keyboards/crkbd/keymaps/vxid/keymap.c b/keyboards/crkbd/keymaps/vxid/keymap.c
index e1c73caeb7..2b600cdd4a 100644
--- a/keyboards/crkbd/keymaps/vxid/keymap.c
+++ b/keyboards/crkbd/keymaps/vxid/keymap.c
@@ -25,39 +25,39 @@ enum custom_keycodes {
 #define KC_RAISE RAISE
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc( \
+  [_QWERTY] = LAYOUT( \
   //,-----------------------------------------.                ,-----------------------------------------.
-          Q,     W,     E,     R,     T,   ESC,                    DEL,     Y,     U,     I,     O,     P,\
+          KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,   KC_ESC,                    KC_DEL,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-          A,     S,     D,     F,     G,   SPC,                   BSPC,     H,     J,     K,     L,  SCLN,\
+          KC_A,     KC_S,     KC_D,     KC_F,     KC_G,   KC_SPC,                   KC_BSPC,     KC_H,     KC_J,     KC_K,     KC_L,  KC_SCLN,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-          Z,     X,     C,     V,     B,   TAB,                    ENT,     N,     M,  COMM,   DOT,  SLSH,\
+          KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,   KC_TAB,                    KC_ENT,     KC_N,     KC_M,  KC_COMM,   KC_DOT,  KC_SLSH,\
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                                   KC_LALT,  KC_LGUI,  KC_LCTL,     KC_LSFT, KC_RAISE, KC_LOWER \
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT_kc( \
+  [_LOWER] = LAYOUT( \
   //,-----------------------------------------.                ,------------------------------------------.
-          1,     2,     3,     4,     5, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+          KC_1,     KC_2,     KC_3,     KC_4,     KC_5, KC_XXXXX,                   KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
   //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-          6,     7,     8,     9,     0, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+          KC_6,     KC_7,     KC_8,     KC_9,     KC_0, KC_XXXXX,                   KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
   //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-        EQL,  PLUS,  MINS,  SLSH,  ASTR, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+        KC_EQL,  KC_PLUS,  KC_MINS,  KC_SLSH,  KC_ASTR, KC_XXXXX,                   KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
   //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                                   KC_LALT,  KC_LGUI,  KC_LCTL,     KC_LSFT, KC_RAISE, KC_LOWER \
                               //`--------------------'  `--------------------'
   ),
 
-  [_RAISE] = LAYOUT_kc( \
+  [_RAISE] = LAYOUT( \
   //,-----------------------------------------.                ,------------------------------------------.
-       EXLM,    AT,  HASH,   DLR,  PERC,  LPRN,                    RPRN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+       KC_EXLM,    KC_AT,  KC_HASH,   KC_DLR,  KC_PERC,  KC_LPRN,                    KC_RPRN, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
   //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-       CIRC,  AMPR,  ASTR,  QUOT,  DQUO,  LCBR,                    RCBR,  LEFT,  DOWN,    UP, RIGHT, XXXXX,\
+       KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_QUOT,  KC_DQUO,  KC_LCBR,                    KC_RCBR,  KC_LEFT,  KC_DOWN,    KC_UP, KC_RIGHT, KC_XXXXX,\
   //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-       BSLS,  TILD,   GRV,  UNDS,  PIPE,  LBRC,                    RBRC, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+       KC_BSLS,  KC_TILD,   KC_GRV,  KC_UNDS,  KC_PIPE,  KC_LBRC,                    KC_RBRC, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
   //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                                   KC_LALT,  KC_LGUI,  KC_LCTL,     KC_LSFT, KC_RAISE, KC_LOWER \
                               //`--------------------'  `--------------------'
   )
 };
diff --git a/keyboards/crkbd/rev1/rev1.h b/keyboards/crkbd/rev1/rev1.h
index c805efccce..5446583b13 100644
--- a/keyboards/crkbd/rev1/rev1.h
+++ b/keyboards/crkbd/rev1/rev1.h
@@ -70,18 +70,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { KC_NO, KC_NO, KC_NO, R32, R31, R30 } \
   }
 
-#define LAYOUT_kc( \
-  L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
-  L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
-  L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
-                      L30, L31, L32, R30, R31, R32 \
-  ) \
-  LAYOUT_split_3x6_3( \
-    KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05,                     KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
-    KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15,                     KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
-    KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25,                     KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
-                                            KC_##L30, KC_##L31, KC_##L32, KC_##R30, KC_##R31, KC_##R32 \
-  )
-// clang-format on
-
 #define LAYOUT LAYOUT_split_3x6_3