Move Infinity Ergodox drivers to subproject, and fix makefile

5 files changed, 484 insertions, 0 deletions

diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
new file mode 100644
index 0000000000..290571ce5b
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#include "print.h"
+
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+	NULL,
+	/* HW dependent part.*/
+	ST7565_GPIOPORT,
+    ST7565_SS_PIN,
+    SPIx_CTARn_FMSZ(7)
+    | SPIx_CTARn_ASC(7)
+    | SPIx_CTARn_DT(7)
+    | SPIx_CTARn_CSSCK(7)
+    | SPIx_CTARn_PBR(0)
+    | SPIx_CTARn_BR(7)
+	//SPI_CR1_BR_0
+};
+
+static bool_t st7565_is_data_mode = 1;
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    st7565_is_data_mode = 1;
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeRaw(SS, ST7565_SPI_MODE);
+
+    spiInit();
+    spiStart(&SPID1, &spi1config);
+    spiSelect(&SPID1);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+}
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to acquire
+    // spiAcquireBus(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to release
+    //spiReleaseBus(&SPID1);
+}
+
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
+	(void) g;
+	if (st7565_is_data_mode) {
+	    // The sleeps need to be at lest 10 vs 25 ns respectively
+	    // So let's sleep two ticks, one tick might not be enough
+	    // if we are at the end of the tick
+	    chThdSleep(2);
+        palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+        chThdSleep(2);
+        st7565_is_data_mode = 0;
+	}
+	spiSend(&SPID1, 1, &cmd);
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	if (!st7565_is_data_mode) {
+	    // The sleeps need to be at lest 10 vs 25 ns respectively
+	    // So let's sleep two ticks, one tick might not be enough
+	    // if we are at the end of the tick
+	    chThdSleep(2);
+        palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+	    chThdSleep(2);
+        st7565_is_data_mode = 1;
+	}
+	spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
new file mode 100644
index 0000000000..889a1a0317
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/st7565ergodox
+GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
new file mode 100644
index 0000000000..c33aea81a8
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
@@ -0,0 +1,292 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
+#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_ST7565.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		32
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		128
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#include "drivers/gdisp/st7565ergodox/st7565.h"
+
+/*===========================================================================*/
+/* Driver config defaults for backward compatibility.               	     */
+/*===========================================================================*/
+#ifndef ST7565_LCD_BIAS
+  #define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
+#endif
+#ifndef ST7565_ADC
+  #define ST7565_ADC              ST7565_ADC_NORMAL
+#endif
+#ifndef ST7565_COM_SCAN
+  #define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
+#endif
+#ifndef ST7565_PAGE_ORDER
+  #define ST7565_PAGE_ORDER       0,1,2,3
+#endif
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    bool_t buffer2;
+    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+}PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+#define RAM(g)							(PRIV(g)->ram)
+#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+
+// Some common routines and macros
+#define delay(us)			gfxSleepMicroseconds(us)
+#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+
+#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y)			(1<<((y)&7))
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+/*
+ * As this controller can't update on a pixel boundary we need to maintain the
+ * the entire display surface in memory so that we can do the necessary bit
+ * operations. Fortunately it is a small display in monochrome.
+ * 64 * 128 / 8 = 1024 bytes.
+ */
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+	PRIV(g)->buffer2 = false;
+
+	// Initialise the board interface
+	init_board(g);
+
+	// Hardware reset
+	setpin_reset(g, TRUE);
+	gfxSleepMilliseconds(20);
+	setpin_reset(g, FALSE);
+	gfxSleepMilliseconds(20);
+
+	acquire_bus(g);
+    write_cmd(g, ST7565_DISPLAY_OFF);
+	write_cmd(g, ST7565_LCD_BIAS);
+    write_cmd(g, ST7565_ADC);
+    write_cmd(g, ST7565_COM_SCAN);
+    
+    write_cmd(g, ST7565_START_LINE | 0);
+
+	write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
+
+	// turn on voltage converter (VC=1, VR=0, VF=0)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x04);
+	delay_ms(50);
+
+	// turn on voltage regulator (VC=1, VR=1, VF=0)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x06);
+	delay_ms(50);
+
+	// turn on voltage follower (VC=1, VR=1, VF=1)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+	delay_ms(50);
+
+	write_cmd(g, 0xE2);
+    write_cmd(g, ST7565_COM_SCAN);
+	write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
+	//write_cmd2(g, ST7565_CONTRAST, 0);
+	write_cmd(g, ST7565_DISPLAY_ON);
+	write_cmd(g, ST7565_ALLON_NORMAL);
+	write_cmd(g, ST7565_INVERT_DISPLAY);
+
+	write_cmd(g, ST7565_RMW);
+
+    // Finish Init
+    post_init_board(g);
+
+ 	// Release the bus
+	release_bus(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOn;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		unsigned	p;
+
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		acquire_bus(g);
+		unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+		for (p = 0; p < 4; p++) {
+			write_cmd(g, ST7565_PAGE | (p + dstOffset));
+			write_cmd(g, ST7565_COLUMN_MSB | 0);
+			write_cmd(g, ST7565_COLUMN_LSB | 0);
+			write_cmd(g, ST7565_RMW);
+			write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+		}
+		unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+        write_cmd(g, ST7565_START_LINE | line);
+        PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+		release_bus(g);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_90:
+			x = g->p.y;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			break;
+		case GDISP_ROTATE_270:
+			x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			y = g->p.x;
+			break;
+		}
+		if (gdispColor2Native(g->p.color) != Black)
+			RAM(g)[xyaddr(x, y)] |= xybit(y);
+		else
+			RAM(g)[xyaddr(x, y)] &= ~xybit(y);
+		g->flags |= GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_90:
+			x = g->p.y;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			break;
+		case GDISP_ROTATE_270:
+			x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			y = g->p.x;
+			break;
+		}
+		return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
+	}
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+		switch(g->p.x) {
+		case GDISP_CONTROL_POWER:
+			if (g->g.Powermode == (powermode_t)g->p.ptr)
+				return;
+			switch((powermode_t)g->p.ptr) {
+			case powerOff:
+			case powerSleep:
+			case powerDeepSleep:
+				acquire_bus(g);
+				write_cmd(g, ST7565_DISPLAY_OFF);
+				release_bus(g);
+				break;
+			case powerOn:
+				acquire_bus(g);
+				write_cmd(g, ST7565_DISPLAY_ON);
+				release_bus(g);
+				break;
+			default:
+				return;
+			}
+			g->g.Powermode = (powermode_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_ORIENTATION:
+			if (g->g.Orientation == (orientation_t)g->p.ptr)
+				return;
+			switch((orientation_t)g->p.ptr) {
+			/* Rotation is handled by the drawing routines */
+			case GDISP_ROTATE_0:
+			case GDISP_ROTATE_180:
+				g->g.Height = GDISP_SCREEN_HEIGHT;
+				g->g.Width = GDISP_SCREEN_WIDTH;
+				break;
+			case GDISP_ROTATE_90:
+			case GDISP_ROTATE_270:
+				g->g.Height = GDISP_SCREEN_WIDTH;
+				g->g.Width = GDISP_SCREEN_HEIGHT;
+				break;
+			default:
+				return;
+			}
+			g->g.Orientation = (orientation_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_CONTRAST:
+            if ((unsigned)g->p.ptr > 100)
+            	g->p.ptr = (void *)100;
+			acquire_bus(g);
+			write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F);
+			release_bus(g);
+            g->g.Contrast = (unsigned)g->p.ptr;
+			return;
+		}
+	}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
new file mode 100644
index 0000000000..48587b9e14
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_MONO
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
new file mode 100644
index 0000000000..48636b33d6
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _ST7565_H
+#define _ST7565_H
+
+#define ST7565_CONTRAST             0x81
+#define ST7565_ALLON_NORMAL         0xA4
+#define ST7565_ALLON                0xA5
+#define ST7565_POSITIVE_DISPLAY     0xA6
+#define ST7565_INVERT_DISPLAY       0xA7
+#define ST7565_DISPLAY_OFF          0xAE
+#define ST7565_DISPLAY_ON           0xAF
+
+#define ST7565_LCD_BIAS_7           0xA3
+#define ST7565_LCD_BIAS_9           0xA2
+
+#define ST7565_ADC_NORMAL           0xA0
+#define ST7565_ADC_REVERSE          0xA1
+
+#define ST7565_COM_SCAN_INC         0xC0
+#define ST7565_COM_SCAN_DEC         0xC8
+
+#define ST7565_START_LINE           0x40
+#define ST7565_PAGE                 0xB0
+#define ST7565_COLUMN_MSB           0x10
+#define ST7565_COLUMN_LSB           0x00
+#define ST7565_RMW                  0xE0
+
+#define ST7565_RESISTOR_RATIO       0x20
+#define ST7565_POWER_CONTROL        0x28
+
+#endif /* _ST7565_H */