2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change                                                      

21 files changed, 713 insertions, 0 deletions

diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c b/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c
new file mode 100644
index 0000000000..87e1244214
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c
@@ -0,0 +1,33 @@
+#include QMK_KEYBOARD_H
+
+// These are all aliases for the  function layers.
+#define _L0 0
+#define _L1 1
+#define _L2 2
+#define _L3 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_L0] = LAYOUT(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_L1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	TG(_L3),	KC_SPC, 				KC_SPC,					MO(_L2),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_L2] = LAYOUT(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L1] = LAYOUT(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L3] = LAYOUT(
+  _______,		_______,	_______,	   KC_7,	   KC_8,	   KC_9,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	   KC_4,	   KC_5,	   KC_6,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   KC_1,	   KC_2,	   KC_3,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   _______,    KC_0,	  KC_DOT, 	        	            _______,	_______,	_______,				RESET),     \
+};
diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
new file mode 100644
index 0000000000..9334aaf28f
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk
@@ -0,0 +1,64 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/evyd13/atom47/keymaps/default/keymap.c b/keyboards/evyd13/atom47/keymaps/default/keymap.c
new file mode 100644
index 0000000000..dc87b5a52b
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/default/keymap.c
@@ -0,0 +1,50 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,	MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),				KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,		KC_RCTRL),	\
+ 
+[_FN] = LAYOUT(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+ 
+[_FN1] = LAYOUT(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+ 
+[_PN] = LAYOUT(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  RGB_TOG,		RGB_HUI,	RGB_SAI,	RGB_VAI,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  RGB_MOD,					RGB_HUD,	RGB_SAD,	RGB_VAD,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	PORTE &= ~(1 << 6);
+
+
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+
diff --git a/keyboards/evyd13/atom47/keymaps/default/readme.md b/keyboards/evyd13/atom47/keymaps/default/readme.md
new file mode 100644
index 0000000000..6795953857
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/default/readme.md
@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c b/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c
new file mode 100644
index 0000000000..c01ace92a9
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c
@@ -0,0 +1,68 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _LO 1 //FN1
+#define _RA 2 //FN
+
+enum custom_keycodes {
+    CTRLZ = SAFE_RANGE,
+    CTRLX,
+    CTRLC,
+    CTRLV
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = LAYOUT(
+  KC_GESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
+
+[_LO] = LAYOUT(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					CTRLZ,		CTRLX,		CTRLC,		CTRLV,		_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
+
+[_RA] = LAYOUT(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
+  KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+		PORTE &= ~(1 << 6);
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case CTRLZ:
+                SEND_STRING(SS_LCTRL("z"));
+                return false;
+            case CTRLX:
+                SEND_STRING(SS_LCTRL("x"));
+                return false;
+            case CTRLC:
+                SEND_STRING(SS_LCTRL("c"));
+                return false;
+            case CTRLV:
+                SEND_STRING(SS_LCTRL("v"));
+                return false;
+        }
+    }
+    return true;
+};
diff --git a/keyboards/evyd13/atom47/keymaps/evyd13/readme.md b/keyboards/evyd13/atom47/keymaps/evyd13/readme.md
new file mode 100644
index 0000000000..6795953857
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/evyd13/readme.md
@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
new file mode 100644
index 0000000000..ebd52ffd03
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c
@@ -0,0 +1,150 @@
+#include QMK_KEYBOARD_H
+
+/* enum custom_keycodes {
+  SHIFTEN = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  SPACFNL,
+  SPACFNR,
+  MAIN,
+  ADJUST
+}; */
+
+#define _MAIN 0
+#define _SPLEFT 1
+#define _SPRIGHT 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 5
+
+#define _DPAD 6
+#define _DPADNUM 7
+
+
+#define SHIFTEN RSFT_T(KC_ENT)
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define SPACFNL LT(_SPLEFT, KC_SPC)
+#define SPACFNR LT(_SPRIGHT, KC_SPC)
+
+#define DP_ON TO(_DPAD)
+#define DP_OFF TO(_MAIN)
+#define DPADNUM MO(_DPADNUM)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	// Primary layer	
+	[_MAIN] = LAYOUT(
+	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
+	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
+	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	SHIFTEN,
+	  KC_LCTL,		KC_LGUI,	KC_LALT,	LOWER,					SPACFNL, 				SPACFNR,				RAISE,		KC_RALT,	KC_APP,		KC_RCTRL
+	),
+
+	// Main Fn navigation layer
+	[_SPLEFT] = LAYOUT(
+	  _______,		KC_VOLU, 	KC_PGUP, 	KC_UP,   	KC_PGDN, 	KC_INS,  	_______, 	_______, 	KC_UP,   	_______, 	KC_PSCR,	_______,	_______,	
+	  _______,		KC_VOLD, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	KC_HOME, 	_______, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	_______, 				KC_DEL , 	
+	  _______,					_______,    KC_MPRV, 	KC_MPLY, 	KC_MNXT, 	KC_END,  	_______, 	_______, 	KC_VOLD, 	KC_VOLU, 	KC_MUTE,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),	
+
+	// Primary numeric layer using right Spacebar
+	[_SPRIGHT] = LAYOUT(
+	  KC_GRV,		_______,	_______,	KC_LBRC, 	KC_RBRC,	_______,	_______,	KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,	
+	  _______,		_______,	_______,	KC_LCBR, 	KC_RCBR,	_______,	_______,	KC_4,		KC_5,		KC_6,	 	KC_MINUS, 				KC_BSLS, 	
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_1,		KC_2,		KC_3,		KC_EQUAL,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),	
+
+	// Secondary symbol layer, also Lower
+	[_LOWER] = LAYOUT(
+	  KC_TILD, 		_______,	_______,	_______,	_______,	_______,	_______, 	KC_AMPR, 	KC_ASTR, 	KC_LPRN, 	KC_RPRN,	KC_SLCK,	KC_PAUS,	
+	  KC_CAPS,		KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,		KC_DLR,  	KC_PERC, 	KC_CIRC, 	KC_UNDS, 				KC_PIPE,	
+	  _______,					KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		KC_EXLM, 	KC_AT,   	KC_HASH, 	KC_PLUS,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
+	),	
+	  
+	// Numpad layer // Also a homage to Planck with the media player/pause button
+	[_RAISE] = LAYOUT(
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
+	),	
+
+	// Safety layer for special functions
+	[_ADJUST] = LAYOUT(
+	  _______,		RESET,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
+	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
+	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	DP_ON,
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),
+	
+	[_DPAD] = LAYOUT(
+	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
+	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
+	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_UP,		KC_ENT,
+	  KC_LCTL,		KC_LGUI,	KC_LALT,	XXXXXXX,				DPADNUM, 				KC_SPC,					DP_OFF,		KC_LEFT,	KC_DOWN,	KC_RGHT
+	),
+	
+	[_DPADNUM] = LAYOUT(
+	  _______,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,
+	  _______,		_______,	_______,	_______,	_______,	KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,					_______,
+	  _______,					_______,	_______,	_______,	_______,	KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		_______,
+	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
+	),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+/*     case MAIN:
+      if (record->event.pressed) {
+        persistant_default_layer_set(1UL<<_MAIN);
+      }
+      return false;
+      break; */
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+/*     case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break; */
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	writePinLow(E6);
+
+
+    } else {
+        // Turn capslock off
+    	writePinHigh(E6);
+    }
+}
diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
new file mode 100644
index 0000000000..42d8370231
--- /dev/null
+++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md
@@ -0,0 +1 @@
+Juno's junonum keymap adapted for Atom47.
\ No newline at end of file
diff --git a/keyboards/evyd13/atom47/readme.md b/keyboards/evyd13/atom47/readme.md
new file mode 100644
index 0000000000..70171c04d1
--- /dev/null
+++ b/keyboards/evyd13/atom47/readme.md
@@ -0,0 +1,26 @@
+# Atom47
+
+![Atom47](https://i.imgur.com/Wwflqvt.png)
+
+## Support
+Keyboard Maintainer: [Evyd13](https://github.com/evyd13)  
+Hardware Supported: Atom47 rev2/rev3
+Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
+
+
+## Features (rev3 and up)
+- QMK Firmware  
+- 6 Underglow RGB leds  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- South facing leds for the QMX/Zealencio users  
+- Multiple layouts  
+- Easily reachable reset button under the spacebar  
+- CapsLock indicator  
+
+## Build
+To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+![Atom47](https://i.imgur.com/JfYnOba.jpg)
diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h
new file mode 100644
index 0000000000..74061726c4
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/config.h
@@ -0,0 +1,68 @@
+/*
+Copyright 2012 Evy Dekkers
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core Rev.2
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6
+
+#endif
diff --git a/keyboards/evyd13/atom47/rev2/info.json b/keyboards/evyd13/atom47/rev2/info.json
new file mode 100644
index 0000000000..aa15e76064
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/info.json
@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Atom47", 
+  "url": "", 
+  "maintainer": "evyd13", 
+  "width": 13, 
+  "height": 4, 
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
+    }
+  }
+}
diff --git a/keyboards/evyd13/atom47/rev2/readme.md b/keyboards/evyd13/atom47/rev2/readme.md
new file mode 100644
index 0000000000..b63e1bb44c
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/readme.md
@@ -0,0 +1,23 @@
+# Atom47 rev2
+
+This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)  
+Hardware Supported: Atom47 rev2  
+Hardware Availability: None  
+
+
+## Features
+- QMK Firmware  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- Easily reachable reset button under the spacebar  
+- In-switch CapsLock indicator  
+
+## Build
+To build the default keymap, simply run `make atom47/rev2:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/evyd13/atom47/rev2/rev2.c b/keyboards/evyd13/atom47/rev2/rev2.c
new file mode 100644
index 0000000000..06fce06dad
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/rev2.c
@@ -0,0 +1,34 @@
+#include "rev2.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+
+	//Set output high, so the capslock led is off
+	PORTB |= (1 << 5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}
diff --git a/keyboards/evyd13/atom47/rev2/rev2.h b/keyboards/evyd13/atom47/rev2/rev2.h
new file mode 100644
index 0000000000..bfea34e062
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/rev2.h
@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/evyd13/atom47/rev2/rules.mk b/keyboards/evyd13/atom47/rev2/rules.mk
new file mode 100644
index 0000000000..0b6b879986
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev2/rules.mk
@@ -0,0 +1,2 @@
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality
diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h
new file mode 100644
index 0000000000..f255ee5a7b
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev3/config.h
@@ -0,0 +1,63 @@
+/*
+Copyright 2012 Evy Dekkers
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV3_CONFIG_H
+#define REV3_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core Rev.3
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN F5    // The pin the LED strip is connected to
+#define RGBLED_NUM 6     // Number of LEDs in your strip
+#define RGBLIGHT_ANIMATIONS
+#define QMK_ESC_OUTPUT B7 // usually COL
+#define QMK_ESC_INPUT B3 // usually ROW
+#define QMK_LED E6
+
+#endif
diff --git a/keyboards/evyd13/atom47/rev3/info.json b/keyboards/evyd13/atom47/rev3/info.json
new file mode 100644
index 0000000000..aa15e76064
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev3/info.json
@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Atom47", 
+  "url": "", 
+  "maintainer": "evyd13", 
+  "width": 13, 
+  "height": 4, 
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
+    }
+  }
+}
diff --git a/keyboards/evyd13/atom47/rev3/rev3.c b/keyboards/evyd13/atom47/rev3/rev3.c
new file mode 100644
index 0000000000..c541ed559c
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev3/rev3.c
@@ -0,0 +1,27 @@
+#include "rev3.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRE |= (1 << 6);
+
+	//Set output high, so the capslock led is off
+	PORTE |= (1 << 6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    led_set_user(usb_led);
+}
diff --git a/keyboards/evyd13/atom47/rev3/rev3.h b/keyboards/evyd13/atom47/rev3/rev3.h
new file mode 100644
index 0000000000..ad875bb404
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev3/rev3.h
@@ -0,0 +1,23 @@
+#ifndef ATOM47_REV3_H
+#define ATOM47_REV3_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
+}
+
+
+#endif
diff --git a/keyboards/evyd13/atom47/rev3/rules.mk b/keyboards/evyd13/atom47/rev3/rules.mk
new file mode 100644
index 0000000000..2df225e389
--- /dev/null
+++ b/keyboards/evyd13/atom47/rev3/rules.mk
@@ -0,0 +1,2 @@
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality
diff --git a/keyboards/evyd13/atom47/rules.mk b/keyboards/evyd13/atom47/rules.mk
new file mode 100644
index 0000000000..72c0b219b9
--- /dev/null
+++ b/keyboards/evyd13/atom47/rules.mk
@@ -0,0 +1,28 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = qmk-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+DEFAULT_FOLDER = evyd13/atom47/rev3