diff options
| author | James Young <18669334+noroadsleft@users.noreply.github.com> | 2020-11-28 12:02:18 -0800 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-11-28 12:02:18 -0800 |
| commit | c66df1664497546f32662409778731143e45a552 (patch) | |
| tree | da73a2d532a27685a31d932b3a44a707d4a3af81 /keyboards/evyd13 | |
| parent | 15385d4113414d42bd062c60c9de5df797d3157f (diff) | |
| download | qmk_firmware-c66df1664497546f32662409778731143e45a552.tar.gz qmk_firmware-c66df1664497546f32662409778731143e45a552.zip | |
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
Diffstat (limited to 'keyboards/evyd13')
235 files changed, 15236 insertions, 0 deletions
diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c b/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c new file mode 100644 index 0000000000..87e1244214 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/LEdiodes/keymap.c @@ -0,0 +1,33 @@ +#include QMK_KEYBOARD_H + +// These are all aliases for the function layers. +#define _L0 0 +#define _L1 1 +#define _L2 2 +#define _L3 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_L0] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \ + KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \ + +[_L2] = LAYOUT( + _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ + _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L3] = LAYOUT( + _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \ +}; diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk new file mode 100644 index 0000000000..9334aaf28f --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk @@ -0,0 +1,64 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/evyd13/atom47/keymaps/default/keymap.c b/keyboards/evyd13/atom47/keymaps/default/keymap.c new file mode 100644 index 0000000000..dc87b5a52b --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _FN 1 //Fn +#define _FN1 2 //Fn1 +#define _PN 3 //Pn + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \ + KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \ + +[_FN] = LAYOUT( + _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ + _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_FN1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_PN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTE &= ~(1 << 6); + + + } else { + // Turn capslock off + PORTE |= (1 << 6); + } +} + diff --git a/keyboards/evyd13/atom47/keymaps/default/readme.md b/keyboards/evyd13/atom47/keymaps/default/readme.md new file mode 100644 index 0000000000..6795953857 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control. diff --git a/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c b/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c new file mode 100644 index 0000000000..c01ace92a9 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/evyd13/keymap.c @@ -0,0 +1,68 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //FN1 +#define _RA 2 //FN + +enum custom_keycodes { + CTRLZ = SAFE_RANGE, + CTRLX, + CTRLC, + CTRLV +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_RA), KC_RALT, KC_APP, KC_RCTRL), \ + +[_LO] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, CTRLZ, CTRLX, CTRLC, CTRLV, _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \ + +[_RA] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \ + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTE &= ~(1 << 6); + } else { + // Turn capslock off + PORTE |= (1 << 6); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + case CTRLZ: + SEND_STRING(SS_LCTRL("z")); + return false; + case CTRLX: + SEND_STRING(SS_LCTRL("x")); + return false; + case CTRLC: + SEND_STRING(SS_LCTRL("c")); + return false; + case CTRLV: + SEND_STRING(SS_LCTRL("v")); + return false; + } + } + return true; +}; diff --git a/keyboards/evyd13/atom47/keymaps/evyd13/readme.md b/keyboards/evyd13/atom47/keymaps/evyd13/readme.md new file mode 100644 index 0000000000..6795953857 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/evyd13/readme.md @@ -0,0 +1 @@ +This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control. diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c new file mode 100644 index 0000000000..ebd52ffd03 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/keymap.c @@ -0,0 +1,150 @@ +#include QMK_KEYBOARD_H + +/* enum custom_keycodes { + SHIFTEN = SAFE_RANGE, + LOWER, + RAISE, + SPACFNL, + SPACFNR, + MAIN, + ADJUST +}; */ + +#define _MAIN 0 +#define _SPLEFT 1 +#define _SPRIGHT 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 5 + +#define _DPAD 6 +#define _DPADNUM 7 + + +#define SHIFTEN RSFT_T(KC_ENT) +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define SPACFNL LT(_SPLEFT, KC_SPC) +#define SPACFNR LT(_SPRIGHT, KC_SPC) + +#define DP_ON TO(_DPAD) +#define DP_OFF TO(_MAIN) +#define DPADNUM MO(_DPADNUM) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Primary layer + [_MAIN] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTEN, + KC_LCTL, KC_LGUI, KC_LALT, LOWER, SPACFNL, SPACFNR, RAISE, KC_RALT, KC_APP, KC_RCTRL + ), + + // Main Fn navigation layer + [_SPLEFT] = LAYOUT( + _______, KC_VOLU, KC_PGUP, KC_UP, KC_PGDN, KC_INS, _______, _______, KC_UP, _______, KC_PSCR, _______, _______, + _______, KC_VOLD, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_DEL , + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + // Primary numeric layer using right Spacebar + [_SPRIGHT] = LAYOUT( + KC_GRV, _______, _______, KC_LBRC, KC_RBRC, _______, _______, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, _______, _______, KC_LCBR, KC_RCBR, _______, _______, KC_4, KC_5, KC_6, KC_MINUS, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_EQUAL, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + // Secondary symbol layer, also Lower + [_LOWER] = LAYOUT( + KC_TILD, _______, _______, _______, _______, _______, _______, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_SLCK, KC_PAUS, + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_DLR, KC_PERC, KC_CIRC, KC_UNDS, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_EXLM, KC_AT, KC_HASH, KC_PLUS, _______, + _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY + ), + + // Numpad layer // Also a homage to Planck with the media player/pause button + [_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY + ), + + // Safety layer for special functions + [_ADJUST] = LAYOUT( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DP_ON, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_DPAD] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT, + KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, DPADNUM, KC_SPC, DP_OFF, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_DPADNUM] = LAYOUT( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, + _______, _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { +/* case MAIN: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_MAIN); + } + return false; + break; */ + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; +/* case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; */ + } + return true; +} + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + // Turn capslock on + writePinLow(E6); + + + } else { + // Turn capslock off + writePinHigh(E6); + } +} diff --git a/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md new file mode 100644 index 0000000000..42d8370231 --- /dev/null +++ b/keyboards/evyd13/atom47/keymaps/junonum_a47/readme.md @@ -0,0 +1 @@ +Juno's junonum keymap adapted for Atom47.
\ No newline at end of file diff --git a/keyboards/evyd13/atom47/readme.md b/keyboards/evyd13/atom47/readme.md new file mode 100644 index 0000000000..70171c04d1 --- /dev/null +++ b/keyboards/evyd13/atom47/readme.md @@ -0,0 +1,26 @@ +# Atom47 + + + +## Support +Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +Hardware Supported: Atom47 rev2/rev3 +Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221) + + +## Features (rev3 and up) +- QMK Firmware +- 6 Underglow RGB leds +- In-switch leds +- Through-hole micro usb connector (less likely to break off!) +- South facing leds for the QMX/Zealencio users +- Multiple layouts +- Easily reachable reset button under the spacebar +- CapsLock indicator + +## Build +To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`. + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + + diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h new file mode 100644 index 0000000000..74061726c4 --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2012 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Vortex +#define PRODUCT Core +#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B1,B2,B3,B7} +#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +#define RGB_DI_PIN D0 // The pin the LED strip is connected to +#define RGBLED_NUM 1 // Number of LEDs in your strip + +#define QMK_ESC_OUTPUT D7 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED B6 + +#endif diff --git a/keyboards/evyd13/atom47/rev2/info.json b/keyboards/evyd13/atom47/rev2/info.json new file mode 100644 index 0000000000..aa15e76064 --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Atom47", + "url": "", + "maintainer": "evyd13", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] + } + } +} diff --git a/keyboards/evyd13/atom47/rev2/readme.md b/keyboards/evyd13/atom47/rev2/readme.md new file mode 100644 index 0000000000..b63e1bb44c --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/readme.md @@ -0,0 +1,23 @@ +# Atom47 rev2 + +This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it. + +## Support +Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot) +Hardware Supported: Atom47 rev2 +Hardware Availability: None + + +## Features +- QMK Firmware +- In-switch leds +- Through-hole micro usb connector (less likely to break off!) +- Easily reachable reset button under the spacebar +- In-switch CapsLock indicator + +## Build +To build the default keymap, simply run `make atom47/rev2:default`. + +For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`. + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/evyd13/atom47/rev2/rev2.c b/keyboards/evyd13/atom47/rev2/rev2.c new file mode 100644 index 0000000000..06fce06dad --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/rev2.c @@ -0,0 +1,34 @@ +#include "rev2.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB &= ~(1<<5); + + //Set output high, so the capslock led is off + PORTB |= (1 << 5); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTF |= (1<<5); + } else { + // Turn capslock off + PORTF &= ~(1<<5); + } + led_set_user(usb_led); +} diff --git a/keyboards/evyd13/atom47/rev2/rev2.h b/keyboards/evyd13/atom47/rev2/rev2.h new file mode 100644 index 0000000000..bfea34e062 --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/rev2.h @@ -0,0 +1,25 @@ +#ifndef ATOM47_H +#define ATOM47_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \ + k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \ + {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/evyd13/atom47/rev2/rules.mk b/keyboards/evyd13/atom47/rev2/rules.mk new file mode 100644 index 0000000000..0b6b879986 --- /dev/null +++ b/keyboards/evyd13/atom47/rev2/rules.mk @@ -0,0 +1,2 @@ +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality diff --git a/keyboards/evyd13/atom47/rev3/config.h b/keyboards/evyd13/atom47/rev3/config.h new file mode 100644 index 0000000000..f255ee5a7b --- /dev/null +++ b/keyboards/evyd13/atom47/rev3/config.h @@ -0,0 +1,63 @@ +/* +Copyright 2012 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV3_CONFIG_H +#define REV3_CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Vortex +#define PRODUCT Core +#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B3,B2,B1,B0} +#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +#define RGB_DI_PIN F5 // The pin the LED strip is connected to +#define RGBLED_NUM 6 // Number of LEDs in your strip +#define RGBLIGHT_ANIMATIONS +#define QMK_ESC_OUTPUT B7 // usually COL +#define QMK_ESC_INPUT B3 // usually ROW +#define QMK_LED E6 + +#endif diff --git a/keyboards/evyd13/atom47/rev3/info.json b/keyboards/evyd13/atom47/rev3/info.json new file mode 100644 index 0000000000..aa15e76064 --- /dev/null +++ b/keyboards/evyd13/atom47/rev3/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Atom47", + "url": "", + "maintainer": "evyd13", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] + } + } +} diff --git a/keyboards/evyd13/atom47/rev3/rev3.c b/keyboards/evyd13/atom47/rev3/rev3.c new file mode 100644 index 0000000000..c541ed559c --- /dev/null +++ b/keyboards/evyd13/atom47/rev3/rev3.c @@ -0,0 +1,27 @@ +#include "rev3.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRE |= (1 << 6); + + //Set output high, so the capslock led is off + PORTE |= (1 << 6); +} + +void led_set_kb(uint8_t usb_led) { + led_set_user(usb_led); +} diff --git a/keyboards/evyd13/atom47/rev3/rev3.h b/keyboards/evyd13/atom47/rev3/rev3.h new file mode 100644 index 0000000000..ad875bb404 --- /dev/null +++ b/keyboards/evyd13/atom47/rev3/rev3.h @@ -0,0 +1,23 @@ +#ifndef ATOM47_REV3_H +#define ATOM47_REV3_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \ + {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \ + {k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \ +} + + +#endif diff --git a/keyboards/evyd13/atom47/rev3/rules.mk b/keyboards/evyd13/atom47/rev3/rules.mk new file mode 100644 index 0000000000..2df225e389 --- /dev/null +++ b/keyboards/evyd13/atom47/rev3/rules.mk @@ -0,0 +1,2 @@ +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality diff --git a/keyboards/evyd13/atom47/rules.mk b/keyboards/evyd13/atom47/rules.mk new file mode 100644 index 0000000000..72c0b219b9 --- /dev/null +++ b/keyboards/evyd13/atom47/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +DEFAULT_FOLDER = evyd13/atom47/rev3 diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h new file mode 100644 index 0000000000..0e16c57046 --- /dev/null +++ b/keyboards/evyd13/eon40/config.h @@ -0,0 +1,226 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x0140 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Eon40 +#define DESCRIPTION A 40% ortholinear PCB + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B7,D5,F5,F6} +#define MATRIX_COL_PINS {F0,F1,F4,D3,D4,D6,D7,B4,B5,B6,C6,C7} +#define UNUSED_PINS {B1,B2,B3} + +#define ENCODERS_PAD_A { E6, B0, D1 } +#define ENCODERS_PAD_B { F7, D0, D2 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define QMK_ESC_OUTPUT F0 // usually COL +#define QMK_ESC_INPUT B7 // usually ROW diff --git a/keyboards/evyd13/eon40/eon40.c b/keyboards/evyd13/eon40/eon40.c new file mode 100644 index 0000000000..014fca9d40 --- /dev/null +++ b/keyboards/evyd13/eon40/eon40.c @@ -0,0 +1,16 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon40.h" diff --git a/keyboards/evyd13/eon40/eon40.h b/keyboards/evyd13/eon40/eon40.h new file mode 100644 index 0000000000..03e680d8bd --- /dev/null +++ b/keyboards/evyd13/eon40/eon40.h @@ -0,0 +1,67 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} + +#define LAYOUT_planck_mit( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ +} + +#define LAYOUT_ortho_4x12_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, XXX, XXX, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/evyd13/eon40/info.json b/keyboards/evyd13/eon40/info.json new file mode 100644 index 0000000000..056be65d0d --- /dev/null +++ b/keyboards/evyd13/eon40/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Eon40", + "url": "https://maartenwut.com/product/eon40/", + "maintainer": "qmk", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x12": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + "LAYOUT_planck_mit": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + "LAYOUT_ortho_4x12_2x2u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3, "w":2}, {"x":6, "y":3, "w":2}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + } + } +} diff --git a/keyboards/evyd13/eon40/keymaps/default/keymap.c b/keyboards/evyd13/eon40/keymaps/default/keymap.c new file mode 100644 index 0000000000..2cfb5744cd --- /dev/null +++ b/keyboards/evyd13/eon40/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //Low +#define _HI 2 //High + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_ortho_4x12( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(_LO), KC_SPC, KC_BSPC, MO(_HI), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + +[_LO] = LAYOUT_ortho_4x12( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), + +[_HI] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon40/keymaps/default/readme.md b/keyboards/evyd13/eon40/keymaps/default/readme.md new file mode 100644 index 0000000000..7185afb0e0 --- /dev/null +++ b/keyboards/evyd13/eon40/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Eon40. diff --git a/keyboards/evyd13/eon40/keymaps/via/keymap.c b/keyboards/evyd13/eon40/keymaps/via/keymap.c new file mode 100644 index 0000000000..3af6d609a0 --- /dev/null +++ b/keyboards/evyd13/eon40/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_4x12( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(1), KC_SPC, KC_BSPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_MPLY), + +[1] = LAYOUT_ortho_4x12( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), + +[2] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon40/keymaps/via/rules.mk b/keyboards/evyd13/eon40/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/eon40/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/eon40/readme.md b/keyboards/evyd13/eon40/readme.md new file mode 100644 index 0000000000..5a4e8e3f2d --- /dev/null +++ b/keyboards/evyd13/eon40/readme.md @@ -0,0 +1,21 @@ +# Eon40 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Eon40 +* Hardware Availability: [maartenwut.com](https://maartenwut.com) + + +## Features +- QMK Firmware +- 19mm switch spacing +- USB-C Connector +- Up to three rotary encoders +- No leds + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/eon40:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk new file mode 100644 index 0000000000..a1a2f76d4f --- /dev/null +++ b/keyboards/evyd13/eon40/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +ENCODER_ENABLE = yes + +LAYOUTS = ortho_4x12 planck_mit +LAYOUTS_HAS_RGB = no diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h new file mode 100644 index 0000000000..875ccb26b8 --- /dev/null +++ b/keyboards/evyd13/eon65/config.h @@ -0,0 +1,220 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xAEB4 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Eon65 +#define DESCRIPTION A 65% PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D3,D5,B1,B2,B3} +#define MATRIX_COL_PINS {B0,D2,D4,D6,D7,B4,B5,B6,C6,C7,F7,F6,F5,F4,F1,F0} +#define UNUSED_PINS {B7,D0,D1} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + #define RGB_DI_PIN E6 + #ifdef RGB_DI_PIN + #define RGBLED_NUM 10 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 + #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/eon65/eon65.c b/keyboards/evyd13/eon65/eon65.c new file mode 100644 index 0000000000..cdbe987ebb --- /dev/null +++ b/keyboards/evyd13/eon65/eon65.c @@ -0,0 +1,16 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon65.h" diff --git a/keyboards/evyd13/eon65/eon65.h b/keyboards/evyd13/eon65/eon65.h new file mode 100644 index 0000000000..21cfd06647 --- /dev/null +++ b/keyboards/evyd13/eon65/eon65.h @@ -0,0 +1,103 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \ +} + +#define LAYOUT_65_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \ +} + +#define LAYOUT_65_ansi_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, XXX, k4c, k4d, k4e, XXX } \ +} + +#define LAYOUT_65_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e, XXX } \ +} + +#define LAYOUT_65_iso_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4c, k4d, k4e \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, XXX, k4c, k4d, k4e, XXX } \ +} diff --git a/keyboards/evyd13/eon65/info.json b/keyboards/evyd13/eon65/info.json new file mode 100644 index 0000000000..1a9f749576 --- /dev/null +++ b/keyboards/evyd13/eon65/info.json @@ -0,0 +1,392 @@ +{ + "keyboard_name": "Eon65", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":2, "w":1.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + }, + "LAYOUT_65_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_blocker": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + }, + "LAYOUT_65_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + }, + "LAYOUT_65_iso_blocker": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + } + } +} diff --git a/keyboards/evyd13/eon65/keymaps/default/keymap.c b/keyboards/evyd13/eon65/keymaps/default/keymap.c new file mode 100644 index 0000000000..d7fc26de07 --- /dev/null +++ b/keyboards/evyd13/eon65/keymaps/default/keymap.c @@ -0,0 +1,32 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon65/keymaps/mrsendyyk/keymap.c b/keyboards/evyd13/eon65/keymaps/mrsendyyk/keymap.c new file mode 100644 index 0000000000..f9c7178f6a --- /dev/null +++ b/keyboards/evyd13/eon65/keymaps/mrsendyyk/keymap.c @@ -0,0 +1,46 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * Default Layer [0] + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │Del│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │P U│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │Caps L│A │S │D │F │G │H │J │K │L │; │' │Return │P D│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │Shift │Z │X │C │V │B │N │M │, │. │/ │Shift │↑ │Fn │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤ + * │Ctrl│Opt │Cmd │ Space │Cmd │Opt │█│← │↓ │→ │ + * └────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘ + */ + [0] = LAYOUT_65_ansi_blocker(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* + * Fn Layer [1] + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │Vol+ │ │ │Cal│ │ │N L│Ml │ │ │ │Pause │ │ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤ + * │Vol-│Rwd │F FD│ Play │Stp │ │█│Prv│ │Nxt│ + * └────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘ + */ + [1] = LAYOUT_65_ansi_blocker(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_BRIU, KC_TRNS, KC_TRNS, KC_END, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT, KC_TRNS, + KC_BRID, KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, + KC_VOLU, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_TRNS, KC_TRNS, + KC_VOLD, KC_MRWD, KC_MFFD, KC_MPLY, KC_MSTP, KC_NO, KC_MPRV, KC_NO, KC_MNXT + ) +}; diff --git a/keyboards/evyd13/eon65/keymaps/mrsendyyk/readme.md b/keyboards/evyd13/eon65/keymaps/mrsendyyk/readme.md new file mode 100644 index 0000000000..333577030a --- /dev/null +++ b/keyboards/evyd13/eon65/keymaps/mrsendyyk/readme.md @@ -0,0 +1,38 @@ +# [Sendy YK](https://mr.sendyyk.com)'s Keymap +`LAYOUT_65_ansi_blocker` + +### Default Layer [0] +``` +┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ +│Esc│1 │2 │3 │4 │5 │6 │7 │8 │9 │0 │- │= │Bspc │Del│ +├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ +│Tab │Q │W │E │R │T │Y │U │I │O │P │[ │] │\ │P U│ +├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ +│Caps L│A │S │D │F │G │H │J │K │L │; │' │Return │P D│ +├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ +│Shift │Z │X │C │V │B │N │M │, │. │/ │Shift │↑ │Fn │ +├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤ +│Ctrl│Opt │Cmd │ Space │Cmd │Opt │█│← │↓ │→ │ +└────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘ +``` + +### Fn Layer [1] +``` +┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ +│` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ │ │ +├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ +│Bri+ │ │ │End│Rst│ │ │ │Ins│ │P S│ │ │Eject│ │ +├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ +│Bri- │ │S L│ │ │ │Hm │ │ │ │ │ │Mute │ │ +├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ +│Vol+ │ │ │Cal│ │ │N L│Ml │ │ │ │Pause │ │ │ +├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬┬┬───┼───┼───┤ +│Vol-│Rwd │F FD│ Play │Stp │ │█│Prv│ │Nxt│ +└────┴────┴────┴────────────────────────┴────┴────┴┴┴───┴───┴───┘ +``` + +## Build The Firmware +You will need to build the firmware. To do so go to your terminal window and run the compile command: + + qmk compile -kb evyd13/eon65 -km mrsendyyk +See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/eon65/keymaps/via/keymap.c b/keyboards/evyd13/eon65/keymaps/via/keymap.c new file mode 100644 index 0000000000..d341f10406 --- /dev/null +++ b/keyboards/evyd13/eon65/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon65/keymaps/via/rules.mk b/keyboards/evyd13/eon65/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/eon65/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/eon65/readme.md b/keyboards/evyd13/eon65/readme.md new file mode 100644 index 0000000000..e7487e4c86 --- /dev/null +++ b/keyboards/evyd13/eon65/readme.md @@ -0,0 +1,13 @@ +# Eon65 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Eon65 +* Hardware Availability: None + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/eon65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk new file mode 100644 index 0000000000..e34ef7475a --- /dev/null +++ b/keyboards/evyd13/eon65/rules.mk @@ -0,0 +1,34 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/evyd13/eon75/config.h b/keyboards/evyd13/eon75/config.h new file mode 100644 index 0000000000..504ed1182b --- /dev/null +++ b/keyboards/evyd13/eon75/config.h @@ -0,0 +1,221 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x5C62 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Eon75 +#define DESCRIPTION A 75% PCB + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D1,D0,D3,D2,D6,D4,D7,B4,B5,B6,C6,C7} +#define MATRIX_COL_PINS {E6,F0,F1,F4,F5,F6,F7,B3} +#define UNUSED_PINS {B2,B1} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN D0 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + diff --git a/keyboards/evyd13/eon75/eon75.c b/keyboards/evyd13/eon75/eon75.c new file mode 100644 index 0000000000..67e9fe66a2 --- /dev/null +++ b/keyboards/evyd13/eon75/eon75.c @@ -0,0 +1,45 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon75.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output and high + setPinOutput(D5); + writePinHigh(D5); + + setPinOutput(B7); + writePinHigh(B7); + + setPinOutput(B0); + writePinHigh(B0); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(D5, !led_state.caps_lock); + writePin(B7, !led_state.num_lock); + writePin(B0, !led_state.scroll_lock); + } + + return true; +} diff --git a/keyboards/evyd13/eon75/eon75.h b/keyboards/evyd13/eon75/eon75.h new file mode 100644 index 0000000000..ee4a91f7f8 --- /dev/null +++ b/keyboards/evyd13/eon75/eon75.h @@ -0,0 +1,97 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57 }, \ + { k60, k61, k62, k63, k64, k65, k66, XXX }, \ + { k70, k71, k72, k73, k74, k75, k76, k77 }, \ + { k80, k81, k82, k83, k84, k85, k86, k87 }, \ + { k90, k91, k92, k93, k94, k95, XXX, k97 }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \ +} + +#define LAYOUT_ansi( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k77, \ + k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, XXX, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57 }, \ + { k60, k61, k62, k63, k64, k65, XXX, XXX }, \ + { k70, k71, k72, k73, k74, k75, k76, k77 }, \ + { k80, k81, k82, k83, k84, k85, k86, k87 }, \ + { XXX, k91, k92, k93, k94, k95, XXX, k97 }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \ +} + +#define LAYOUT_iso( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k57, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, XXX, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, XXX }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57 }, \ + { k60, k61, k62, k63, k64, k65, k66, XXX }, \ + { k70, k71, k72, k73, k74, k75, k76, k77 }, \ + { k80, k81, k82, k83, k84, k85, k86, k87 }, \ + { k90, k91, k92, k93, k94, k95, XXX, k97 }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7 }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7 } \ +} diff --git a/keyboards/evyd13/eon75/info.json b/keyboards/evyd13/eon75/info.json new file mode 100644 index 0000000000..9066542a1f --- /dev/null +++ b/keyboards/evyd13/eon75/info.json @@ -0,0 +1,289 @@ +{ + "keyboard_name": "Eon75", + "url": "", + "maintainer": "qmk", + "width": 16.5, + "height": 6.5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25}, + {"x":14, "y":1.25}, + {"x":15.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":3.25, "w":1.25}, + {"x":15.5, "y":3.25}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25, "w":2.25}, + {"x":15.5, "y":3.25}, + + {"x":0, "y":4.25, "w":2.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + {"x":15.5, "y":3.25}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/evyd13/eon75/keymaps/default/keymap.c b/keyboards/evyd13/eon75/keymaps/default/keymap.c new file mode 100644 index 0000000000..535393cd90 --- /dev/null +++ b/keyboards/evyd13/eon75/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon75/keymaps/via/keymap.c b/keyboards/evyd13/eon75/keymaps/via/keymap.c new file mode 100644 index 0000000000..106ee970d9 --- /dev/null +++ b/keyboards/evyd13/eon75/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_END, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon75/keymaps/via/rules.mk b/keyboards/evyd13/eon75/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/eon75/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/eon75/readme.md b/keyboards/evyd13/eon75/readme.md new file mode 100644 index 0000000000..7b3ee43f1b --- /dev/null +++ b/keyboards/evyd13/eon75/readme.md @@ -0,0 +1,13 @@ +# Eon75 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Eon75 +* Hardware Availability: None + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/eon75:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk new file mode 100644 index 0000000000..264e0ea67d --- /dev/null +++ b/keyboards/evyd13/eon75/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h new file mode 100644 index 0000000000..2a03ec6c25 --- /dev/null +++ b/keyboards/evyd13/eon87/config.h @@ -0,0 +1,220 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xAA6B +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Eon87 +#define DESCRIPTION A TKL PCB + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B1,B2,B3,D4,D1,D5} +#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,C7,C6,B6,B5,B4,D7,D6,E6,B7,D3,D2} +#define UNUSED_PINS {B0} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + #define RGB_DI_PIN D0 +// #ifdef RGB_DI_PIN + #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/eon87/eon87.c b/keyboards/evyd13/eon87/eon87.c new file mode 100644 index 0000000000..83a005225d --- /dev/null +++ b/keyboards/evyd13/eon87/eon87.c @@ -0,0 +1,16 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon87.h" diff --git a/keyboards/evyd13/eon87/eon87.h b/keyboards/evyd13/eon87/eon87.h new file mode 100644 index 0000000000..9e850625eb --- /dev/null +++ b/keyboards/evyd13/eon87/eon87.h @@ -0,0 +1,79 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k0d, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4f, \ + k50, k51, k52, k54, k56, k58, k5a, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, k54, XXX, k56, XXX, k58, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \ +} + +#define LAYOUT_tkl_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \ + k50, k51, k52, k56, k5a, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d, XXX, XXX, XXX }, \ + { k40, XXX, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \ +} + +#define LAYOUT_tkl_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \ + k50, k51, k52, k56, k5a, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, k5a, k5b, k5c, k5d, k5e, k5f, k5g } \ +} diff --git a/keyboards/evyd13/eon87/info.json b/keyboards/evyd13/eon87/info.json new file mode 100644 index 0000000000..b0ed86a7ea --- /dev/null +++ b/keyboards/evyd13/eon87/info.json @@ -0,0 +1,319 @@ +{ + "keyboard_name": "Eon87", + "url": "", + "maintainer": "qmk", + "width": 18.25, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25}, + {"x": 14, "y": 1.25}, + + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + {"x": 13.5, "y": 2.25, "w": 1.5}, + + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25}, + {"x": 13.75, "y": 3.25, "w": 1.25}, + + {"x": 0, "y": 4.25, "w": 1.25}, + {"x": 1.25, "y": 4.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 1.75}, + {"x": 14, "y": 4.25}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 2.25}, + {"x": 6, "y": 5.25, "w": 1.25}, + {"x": 7.25, "y": 5.25, "w": 2.75}, + {"x": 10, "y": 5.25, "w": 1.25}, + {"x": 11.25, "y": 5.25, "w": 1.25}, + {"x": 12.5, "y": 5.25, "w": 1.25}, + {"x": 13.75, "y": 5.25, "w": 1.25}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25, "w": 2}, + + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + {"x": 13.5, "y": 2.25, "w": 1.5}, + + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25, "w": 2.25}, + + {"x": 0, "y": 4.25, "w": 2.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 2.75}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 6.25}, + {"x": 10, "y": 5.25, "w": 1.25}, + {"x": 11.25, "y": 5.25, "w": 1.25}, + {"x": 12.5, "y": 5.25, "w": 1.25}, + {"x": 13.75, "y": 5.25, "w": 1.25}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25, "w": 2}, + + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25}, + {"x": 13.75, "y": 2.25, "w": 1.25, "h": 2}, + + {"x": 0, "y": 4.25, "w": 1.25}, + {"x": 1.25, "y": 4.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 2.75}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 6.25}, + {"x": 10, "y": 5.25, "w": 1.25}, + {"x": 11.25, "y": 5.25, "w": 1.25}, + {"x": 12.5, "y": 5.25, "w": 1.25}, + {"x": 13.75, "y": 5.25, "w": 1.25}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} + ] + } + } +} diff --git a/keyboards/evyd13/eon87/keymaps/default/keymap.c b/keyboards/evyd13/eon87/keymaps/default/keymap.c new file mode 100644 index 0000000000..c4ba5a86bb --- /dev/null +++ b/keyboards/evyd13/eon87/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _FN 1 //Main layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), +[_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon87/keymaps/default/readme.md b/keyboards/evyd13/eon87/keymaps/default/readme.md new file mode 100644 index 0000000000..a70270cfac --- /dev/null +++ b/keyboards/evyd13/eon87/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Eon87. diff --git a/keyboards/evyd13/eon87/keymaps/via/keymap.c b/keyboards/evyd13/eon87/keymaps/via/keymap.c new file mode 100644 index 0000000000..1a6839fb98 --- /dev/null +++ b/keyboards/evyd13/eon87/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon87/keymaps/via/rules.mk b/keyboards/evyd13/eon87/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/eon87/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/eon87/readme.md b/keyboards/evyd13/eon87/readme.md new file mode 100644 index 0000000000..6eea6c20ec --- /dev/null +++ b/keyboards/evyd13/eon87/readme.md @@ -0,0 +1,13 @@ +# Eon87 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Eon87 +* Hardware Availability: [maartenwut.com](https://maartenwut.com) + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/eon87:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk new file mode 100644 index 0000000000..65cfca7d4b --- /dev/null +++ b/keyboards/evyd13/eon87/rules.mk @@ -0,0 +1,34 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h new file mode 100644 index 0000000000..1fabdd5169 --- /dev/null +++ b/keyboards/evyd13/eon95/config.h @@ -0,0 +1,222 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x8A18 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Eon95 +#define DESCRIPTION A 95% PCB + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D1,D0,D3,D2,D6,D4,D7,B4,B5,B6,C6,C7} +#define MATRIX_COL_PINS {E6,F0,F1,F4,F5,F6,F7,B3,B2,B1} +#define UNUSED_PINS {} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN D0 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/evyd13/eon95/eon95.c b/keyboards/evyd13/eon95/eon95.c new file mode 100644 index 0000000000..5eec86cc11 --- /dev/null +++ b/keyboards/evyd13/eon95/eon95.c @@ -0,0 +1,45 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon95.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + // * Set our LED pins as output and high + setPinOutput(D5); + writePinHigh(D5); + + setPinOutput(B7); + writePinHigh(B7); + + setPinOutput(B0); + writePinHigh(B0); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(D5, !led_state.caps_lock); + writePin(B7, !led_state.num_lock); + writePin(B0, !led_state.scroll_lock); + } + + return true; +} diff --git a/keyboards/evyd13/eon95/eon95.h b/keyboards/evyd13/eon95/eon95.h new file mode 100644 index 0000000000..bf2713184c --- /dev/null +++ b/keyboards/evyd13/eon95/eon95.h @@ -0,0 +1,96 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, k29, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, k48, k58, k49, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49 }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \ + { k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \ + { k90, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \ +} + +#define LAYOUT_ansi( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, k28, k38, k29, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k47, k57, k48, k58, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k77, k68, k78, k69, \ + k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, XXX, k37, k38, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \ + { k60, k61, k62, k63, k64, k65, XXX, XXX, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \ + { XXX, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \ +} +#define LAYOUT_iso( \ + k00, k10, k01, k11, k02, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, k08, k18, k09, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k27, k37, k28, k38, k29, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k57, k48, k58, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k87, k97, k88, k98, k89, \ + ka0, kb0, ka1, kb3, ka5, kb5, ka6, kb6, ka7, kb7, ka8, kb8 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, XXX, k13, k14, k15, k16, k17, k18, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, XXX, k37, k38, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, XXX, k48, XXX }, \ + { k50, k51, k52, k53, k54, k55, XXX, k57, k58, XXX }, \ + { k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \ + { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89 }, \ + { k90, k91, k92, k93, k94, k95, XXX, k97, k98, XXX }, \ + { ka0, ka1, XXX, XXX, XXX, ka5, ka6, ka7, ka8, XXX }, \ + { kb0, XXX, XXX, kb3, XXX, kb5, kb6, kb7, kb8, XXX } \ +} diff --git a/keyboards/evyd13/eon95/info.json b/keyboards/evyd13/eon95/info.json new file mode 100644 index 0000000000..6580ef66ee --- /dev/null +++ b/keyboards/evyd13/eon95/info.json @@ -0,0 +1,338 @@ +{ + "keyboard_name": "Eon95", + "url": "", + "maintainer": "qmk", + "width": 19.5, + "height": 6.5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25}, + {"x":14, "y":1.25}, + {"x":15.5, "y":1.25}, + {"x":16.5, "y":1.25}, + {"x":17.5, "y":1.25}, + {"x":18.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.5, "y":2.25}, + {"x":16.5, "y":2.25}, + {"x":17.5, "y":2.25}, + {"x":18.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":3.25, "w":1.25}, + {"x":15.5, "y":3.25}, + {"x":16.5, "y":3.25}, + {"x":17.5, "y":3.25}, + {"x":18.5, "y":3.25}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + {"x":16.5, "y":4.25}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25, "h":2}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5}, + {"x":16.5, "y":5.25}, + {"x":17.5, "y":5.25} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.5, "y":1.25}, + {"x":16.5, "y":1.25}, + {"x":17.5, "y":1.25}, + {"x":18.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.5, "y":2.25}, + {"x":16.5, "y":2.25}, + {"x":17.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25, "w":2.25}, + {"x":15.5, "y":3.25}, + {"x":16.5, "y":3.25}, + {"x":17.5, "y":3.25}, + {"x":18.5, "y":2.25, "h":2}, + + {"x":0, "y":4.25, "w":2.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + {"x":16.5, "y":4.25}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25, "h":2}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5}, + {"x":16.5, "y":5.25}, + {"x":17.5, "y":5.25} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.75, "y":0}, + {"x":6.75, "y":0}, + {"x":7.75, "y":0}, + {"x":8.75, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.5, "y":1.25}, + {"x":16.5, "y":1.25}, + {"x":17.5, "y":1.25}, + {"x":18.5, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.5, "y":2.25}, + {"x":16.5, "y":2.25}, + {"x":17.5, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + {"x":15.5, "y":3.25}, + {"x":16.5, "y":3.25}, + {"x":17.5, "y":3.25}, + {"x":18.5, "y":2.25, "h":2}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14.25, "y":4.5}, + {"x":15.5, "y":4.25}, + {"x":16.5, "y":4.25}, + {"x":17.5, "y":4.25}, + {"x":18.5, "y":4.25, "h":2}, + + {"x":0, "y":5.25, "w":1.25}, + {"x":1.25, "y":5.25, "w":1.25}, + {"x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"x":10, "y":5.25}, + {"x":11, "y":5.25}, + {"x":12, "y":5.25}, + {"x":13.25, "y":5.5}, + {"x":14.25, "y":5.5}, + {"x":15.25, "y":5.5}, + {"x":16.5, "y":5.25}, + {"x":17.5, "y":5.25} + ] + } + } +} diff --git a/keyboards/evyd13/eon95/keymaps/default/keymap.c b/keyboards/evyd13/eon95/keymaps/default/keymap.c new file mode 100644 index 0000000000..1d61ca55ef --- /dev/null +++ b/keyboards/evyd13/eon95/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon95/keymaps/via/keymap.c b/keyboards/evyd13/eon95/keymaps/via/keymap.c new file mode 100644 index 0000000000..5ada354fae --- /dev/null +++ b/keyboards/evyd13/eon95/keymaps/via/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT), +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +};
\ No newline at end of file diff --git a/keyboards/evyd13/eon95/keymaps/via/rules.mk b/keyboards/evyd13/eon95/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/eon95/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/eon95/readme.md b/keyboards/evyd13/eon95/readme.md new file mode 100644 index 0000000000..0bb43f6513 --- /dev/null +++ b/keyboards/evyd13/eon95/readme.md @@ -0,0 +1,13 @@ +# Eon95 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Eon95 +* Hardware Availability: None + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/eon95:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk new file mode 100644 index 0000000000..264e0ea67d --- /dev/null +++ b/keyboards/evyd13/eon95/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/gh80_1800/config.h b/keyboards/evyd13/gh80_1800/config.h new file mode 100644 index 0000000000..c230aa9af8 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/config.h @@ -0,0 +1,143 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x8B23 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT GH80 1800 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D5,B4,B5,B6,C6,C7,B0,B2,B1,B3} +#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,D3,D2,D1,D0,B7} +#define UNUSED_PINS {E6} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN D0 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/gh80_1800/gh80_1800.c b/keyboards/evyd13/gh80_1800/gh80_1800.c new file mode 100644 index 0000000000..770c6f78bf --- /dev/null +++ b/keyboards/evyd13/gh80_1800/gh80_1800.c @@ -0,0 +1,44 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "gh80_1800.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(D6); + setPinOutput(D7); + setPinOutput(D4); + + writePinHigh(D6); + writePinHigh(D7); + writePinHigh(D4); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(D6, !led_state.num_lock); + writePin(D7, !led_state.caps_lock); + writePin(D4, !led_state.scroll_lock); + } + + return true; +} diff --git a/keyboards/evyd13/gh80_1800/gh80_1800.h b/keyboards/evyd13/gh80_1800/gh80_1800.h new file mode 100644 index 0000000000..920aaf3738 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/gh80_1800.h @@ -0,0 +1,94 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \ + k17, k18, k19, k1a, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k26, k16, k27, k28, k29, k2a, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k37, k38, k39, k3a, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k66, k47, k48, k49, k4a, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, k5a, \ + k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \ + {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \ + {k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a}, \ + {k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \ + {k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a}, \ + {k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \ + {k90, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \ +} + +#define LAYOUT_1800_ansi( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \ + k17, k18, k19, k1a, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k16, k27, k28, k29, k2a, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k37, k38, k39, k3a, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k47, k48, k49, k4a, \ + k80, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, \ + k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \ + {k20, k21, k22, k23, k24, k25, XXX, k27, k28, k29, k2a}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \ + {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \ + {k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, XXX}, \ + {k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \ + {k70, k71, k72, k73, k74, k75, XXX, k77, k78, k79, k7a}, \ + {k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \ + {XXX, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \ +} + +#define LAYOUT_1800_iso( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k07, k08, k09, k0a, \ + k17, k18, k19, k1a, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k36, k16, k27, k28, k29, k2a, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k37, k38, k39, k3a, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76, k66, k47, k48, k49, k4a, \ + k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95, k86, k97, k57, k58, k59, \ + k77, k87, k78, k88, k79, k89, k7a, k8a, k98, k99, k9a, k68, k69, k6a \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \ + {k20, k21, k22, k23, k24, k25, XXX, k27, k28, k29, k2a}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a}, \ + {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a}, \ + {k50, k51, k52, k53, k54, k55, XXX, k57, k58, k59, XXX}, \ + {k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6a}, \ + {k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a}, \ + {k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a}, \ + {k90, k91, k92, k93, k94, k95, XXX, k97, k98, k99, k9a} \ +} diff --git a/keyboards/evyd13/gh80_1800/info.json b/keyboards/evyd13/gh80_1800/info.json new file mode 100644 index 0000000000..b468320d8c --- /dev/null +++ b/keyboards/evyd13/gh80_1800/info.json @@ -0,0 +1,356 @@ +{ + "keyboard_name": "GH80-1800", + "url": "https://github.com/evyd13/gh80-series/tree/master/GH80-1800", + "maintainer": "evyd13", + "width": 19.5, + "height": 7.25, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":15.5, "y":1}, + {"x":16.5, "y":1}, + {"x":17.5, "y":1}, + {"x":18.5, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15.5, "y":2}, + {"x":16.5, "y":2}, + {"x":17.5, "y":2}, + {"x":18.5, "y":2}, + + {"x":0, "y":3, "w":1.5}, + {"x":1.5, "y":3}, + {"x":2.5, "y":3}, + {"x":3.5, "y":3}, + {"x":4.5, "y":3}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3, "w":1.5}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":18.5, "y":3}, + + {"x":0, "y":4, "w":1.75}, + {"x":1.75, "y":4}, + {"x":2.75, "y":4}, + {"x":3.75, "y":4}, + {"x":4.75, "y":4}, + {"x":5.75, "y":4}, + {"x":6.75, "y":4}, + {"x":7.75, "y":4}, + {"x":8.75, "y":4}, + {"x":9.75, "y":4}, + {"x":10.75, "y":4}, + {"x":11.75, "y":4}, + {"x":12.75, "y":4}, + {"x":13.75, "y":4, "w":1.25}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4}, + {"x":18.5, "y":4}, + + {"x":0, "y":5, "w":1.25}, + {"x":1.25, "y":5}, + {"x":2.25, "y":5}, + {"x":3.25, "y":5}, + {"x":4.25, "y":5}, + {"x":5.25, "y":5}, + {"x":6.25, "y":5}, + {"x":7.25, "y":5}, + {"x":8.25, "y":5}, + {"x":9.25, "y":5}, + {"x":10.25, "y":5}, + {"x":11.25, "y":5}, + {"x":12.25, "y":5, "w":1.75}, + {"x":14.25, "y":5.25}, + {"x":15.5, "y":5}, + {"x":16.5, "y":5}, + {"x":17.5, "y":5}, + {"x":18.5, "y":5}, + + {"x":0, "y":6}, + {"x":1, "y":6}, + {"x":2, "y":6}, + {"x":3, "y":6, "w":6}, + {"x":9, "y":6}, + {"x":10, "y":6}, + {"x":11, "y":6}, + {"x":12, "y":6}, + {"x":13.25, "y":6.25}, + {"x":14.25, "y":6.25}, + {"x":15.25, "y":6.25}, + {"x":16.5, "y":6}, + {"x":17.5, "y":6}, + {"x":18.5, "y":6} + ] + }, + "LAYOUT_1800_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":15.5, "y":1}, + {"x":16.5, "y":1}, + {"x":17.5, "y":1}, + {"x":18.5, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2, "w":2}, + {"x":15.5, "y":2}, + {"x":16.5, "y":2}, + {"x":17.5, "y":2}, + {"x":18.5, "y":2}, + + {"x":0, "y":3, "w":1.5}, + {"x":1.5, "y":3}, + {"x":2.5, "y":3}, + {"x":3.5, "y":3}, + {"x":4.5, "y":3}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3, "w":1.5}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":18.5, "y":3}, + + {"x":0, "y":4, "w":1.75}, + {"x":1.75, "y":4}, + {"x":2.75, "y":4}, + {"x":3.75, "y":4}, + {"x":4.75, "y":4}, + {"x":5.75, "y":4}, + {"x":6.75, "y":4}, + {"x":7.75, "y":4}, + {"x":8.75, "y":4}, + {"x":9.75, "y":4}, + {"x":10.75, "y":4}, + {"x":11.75, "y":4}, + {"x":12.75, "y":4, "w":2.25}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4}, + {"x":18.5, "y":4}, + + {"x":0, "y":5, "w":2.25}, + {"x":2.25, "y":5}, + {"x":3.25, "y":5}, + {"x":4.25, "y":5}, + {"x":5.25, "y":5}, + {"x":6.25, "y":5}, + {"x":7.25, "y":5}, + {"x":8.25, "y":5}, + {"x":9.25, "y":5}, + {"x":10.25, "y":5}, + {"x":11.25, "y":5}, + {"x":12.25, "y":5, "w":1.75}, + {"x":14.25, "y":5.25}, + {"x":15.5, "y":5}, + {"x":16.5, "y":5}, + {"x":17.5, "y":5}, + + {"x":0, "y":6}, + {"x":1, "y":6}, + {"x":2, "y":6}, + {"x":3, "y":6, "w":6}, + {"x":9, "y":6}, + {"x":10, "y":6}, + {"x":11, "y":6}, + {"x":12, "y":6}, + {"x":13.25, "y":6.25}, + {"x":14.25, "y":6.25}, + {"x":15.25, "y":6.25}, + {"x":16.5, "y":6}, + {"x":17.5, "y":6}, + {"x":18.5, "y":5, "h":2} + ] + }, + "LAYOUT_1800_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":18.5, "y":0}, + + {"x":15.5, "y":1}, + {"x":16.5, "y":1}, + {"x":17.5, "y":1}, + {"x":18.5, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2, "w":2}, + {"x":15.5, "y":2}, + {"x":16.5, "y":2}, + {"x":17.5, "y":2}, + {"x":18.5, "y":2}, + + {"x":0, "y":3, "w":1.5}, + {"x":1.5, "y":3}, + {"x":2.5, "y":3}, + {"x":3.5, "y":3}, + {"x":4.5, "y":3}, + {"x":5.5, "y":3}, + {"x":6.5, "y":3}, + {"x":7.5, "y":3}, + {"x":8.5, "y":3}, + {"x":9.5, "y":3}, + {"x":10.5, "y":3}, + {"x":11.5, "y":3}, + {"x":12.5, "y":3}, + {"x":15.5, "y":3}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":18.5, "y":3}, + + {"x":0, "y":4, "w":1.75}, + {"x":1.75, "y":4}, + {"x":2.75, "y":4}, + {"x":3.75, "y":4}, + {"x":4.75, "y":4}, + {"x":5.75, "y":4}, + {"x":6.75, "y":4}, + {"x":7.75, "y":4}, + {"x":8.75, "y":4}, + {"x":9.75, "y":4}, + {"x":10.75, "y":4}, + {"x":11.75, "y":4}, + {"x":12.75, "y":4}, + {"x":13.75, "y":3, "w":1.25, "h":2}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4}, + {"x":18.5, "y":4}, + + {"x":0, "y":5, "w":1.25}, + {"x":1.25, "y":5}, + {"x":2.25, "y":5}, + {"x":3.25, "y":5}, + {"x":4.25, "y":5}, + {"x":5.25, "y":5}, + {"x":6.25, "y":5}, + {"x":7.25, "y":5}, + {"x":8.25, "y":5}, + {"x":9.25, "y":5}, + {"x":10.25, "y":5}, + {"x":11.25, "y":5}, + {"x":12.25, "y":5, "w":1.75}, + {"x":14.25, "y":5.25}, + {"x":15.5, "y":5}, + {"x":16.5, "y":5}, + {"x":17.5, "y":5}, + + {"x":0, "y":6}, + {"x":1, "y":6}, + {"x":2, "y":6}, + {"x":3, "y":6, "w":6}, + {"x":9, "y":6}, + {"x":10, "y":6}, + {"x":11, "y":6}, + {"x":12, "y":6}, + {"x":13.25, "y":6.25}, + {"x":14.25, "y":6.25}, + {"x":15.25, "y":6.25}, + {"x":16.5, "y":6}, + {"x":17.5, "y":6}, + {"x":18.5, "y":5, "h":2} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_1800/keymaps/default/keymap.c b/keyboards/evyd13/gh80_1800/keymaps/default/keymap.c new file mode 100644 index 0000000000..bbd8784137 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SLCK, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PPLS, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), +};
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_1800/keymaps/default/readme.md b/keyboards/evyd13/gh80_1800/keymaps/default/readme.md new file mode 100644 index 0000000000..c90376fe84 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the GH80-1800. diff --git a/keyboards/evyd13/gh80_1800/keymaps/via/keymap.c b/keyboards/evyd13/gh80_1800/keymaps/via/keymap.c new file mode 100644 index 0000000000..41795e1e05 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/keymaps/via/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SLCK, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PPLS, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +};
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_1800/keymaps/via/rules.mk b/keyboards/evyd13/gh80_1800/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/gh80_1800/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/gh80_1800/readme.md b/keyboards/evyd13/gh80_1800/readme.md new file mode 100644 index 0000000000..fd392988cf --- /dev/null +++ b/keyboards/evyd13/gh80_1800/readme.md @@ -0,0 +1,13 @@ +# GH80-1800 + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: GH80-1800 +* Hardware Availability: [Open source on GitHub](https://github.com/evyd13/gh80-series/tree/master/GH80-1800) + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/gh80_1800:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_1800/rules.mk b/keyboards/evyd13/gh80_1800/rules.mk new file mode 100644 index 0000000000..eaca844339 --- /dev/null +++ b/keyboards/evyd13/gh80_1800/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth diff --git a/keyboards/evyd13/gh80_3700/config.h b/keyboards/evyd13/gh80_3700/config.h new file mode 100644 index 0000000000..200f179cf7 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/config.h @@ -0,0 +1,143 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x633A +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT GH80 3700 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4} +#define MATRIX_COL_PINS {B0,D7,D6,D4} +#define UNUSED_PINS {} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN B2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 8 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// Define rotary encoder +#define ENCODERS_PAD_A { F1 } +#define ENCODERS_PAD_B { F4 } diff --git a/keyboards/evyd13/gh80_3700/gh80_3700.c b/keyboards/evyd13/gh80_3700/gh80_3700.c new file mode 100644 index 0000000000..f607a440e9 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/gh80_3700.c @@ -0,0 +1,46 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "gh80_3700.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(E6); + setPinOutput(B1); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(F0); + + writePinHigh(E6); + writePinHigh(B1); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(F0); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(E6, !led_state.num_lock); + } + + return true; +}
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_3700/gh80_3700.h b/keyboards/evyd13/gh80_3700/gh80_3700.h new file mode 100644 index 0000000000..4a350a9554 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/gh80_3700.h @@ -0,0 +1,63 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all LAYOUT_ortho_6x4 + +#define LAYOUT_ortho_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, k43 }, \ + { k50, k51, k52, k53 } \ +} + +#define LAYOUT_numpad_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k33, \ + k40, k41, k42, \ + k50, k52, k53 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, KC_NO }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, KC_NO }, \ + { k50, KC_NO, k52, k53 } \ +} diff --git a/keyboards/evyd13/gh80_3700/info.json b/keyboards/evyd13/gh80_3700/info.json new file mode 100644 index 0000000000..9f3ff6e5ed --- /dev/null +++ b/keyboards/evyd13/gh80_3700/info.json @@ -0,0 +1,72 @@ +{ + "keyboard_name": "GH80-3700", + "url": "https://github.com/evyd13/gh80-series/tree/master/GH80-3700", + "maintainer": "evyd13", + "width": 4, + "height": 7, + "layouts": { + "LAYOUT_ortho_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4}, + + {"x":0, "y":5}, + {"x":1, "y":5}, + {"x":2, "y":5}, + {"x":3, "y":5}, + + {"x":0, "y":6}, + {"x":1, "y":6}, + {"x":2, "y":6}, + {"x":3, "y":6} + ] + }, + "LAYOUT_numpad_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2}, + + {"x":0, "y":5}, + {"x":1, "y":5}, + {"x":2, "y":5}, + + {"x":0, "y":6, "w":2}, + {"x":2, "y":6}, + {"x":3, "y":5, "h":2} + ] + } + } +} diff --git a/keyboards/evyd13/gh80_3700/keymaps/default/keymap.c b/keyboards/evyd13/gh80_3700/keymaps/default/keymap.c new file mode 100644 index 0000000000..52dc482157 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/evyd13/gh80_3700/keymaps/default/readme.md b/keyboards/evyd13/gh80_3700/keymaps/default/readme.md new file mode 100644 index 0000000000..8e1232190b --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the GH80-3700. diff --git a/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h b/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h new file mode 100644 index 0000000000..44ac7dcd03 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h @@ -0,0 +1,69 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#ifdef PS2_USE_USART +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ +/* set DDR of CLOCK as input to be slave */ +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ +} while (0) +#define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ +} while (0) +#define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ +} while (0) +#define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ +} while (0) +#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) +#define PS2_USART_RX_DATA UDR1 +#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) +#define PS2_USART_RX_VECT USART1_RX_vect +#define PS2_MOUSE_ENABLE_SCROLLING +#define PS2_MOUSE_INIT_DELAY 1000 +#define PS2_MOUSE_BTN_LEFT 0 +#define PS2_MOUSE_BTN_RIGHT 1 +#define PS2_MOUSE_BTN_MIDDLE 2 +#define PS2_MOUSE_X_MULTIPLIER 2 +#define PS2_MOUSE_Y_MULTIPLIER 2 +#define PS2_MOUSE_V_MULTIPLIER 1 +#define PS2_MOUSE_SCROLL_BTN_MASK 0 +#define PS2_MOUSE_USE_REMOTE_MODE +#endif diff --git a/keyboards/evyd13/gh80_3700/keymaps/ps2/keymap.c b/keyboards/evyd13/gh80_3700/keymaps/ps2/keymap.c new file mode 100644 index 0000000000..52dc482157 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/ps2/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/evyd13/gh80_3700/keymaps/ps2/readme.md b/keyboards/evyd13/gh80_3700/keymaps/ps2/readme.md new file mode 100644 index 0000000000..d434753b17 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/ps2/readme.md @@ -0,0 +1 @@ +This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_3700/keymaps/ps2/rules.mk b/keyboards/evyd13/gh80_3700/keymaps/ps2/rules.mk new file mode 100644 index 0000000000..c58a93b73a --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/ps2/rules.mk @@ -0,0 +1,5 @@ +# Build Options +# change yes to no to disable +# +PS2_MOUSE_ENABLE = yes +PS2_USE_USART = yes diff --git a/keyboards/evyd13/gh80_3700/keymaps/rgb/config.h b/keyboards/evyd13/gh80_3700/keymaps/rgb/config.h new file mode 100644 index 0000000000..1def6cc3f3 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/rgb/config.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define RGB_DI_PIN B2 +#define RGBLED_NUM 8 +#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/evyd13/gh80_3700/keymaps/rgb/keymap.c b/keyboards/evyd13/gh80_3700/keymaps/rgb/keymap.c new file mode 100644 index 0000000000..52dc482157 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/rgb/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/evyd13/gh80_3700/keymaps/rgb/readme.md b/keyboards/evyd13/gh80_3700/keymaps/rgb/readme.md new file mode 100644 index 0000000000..cac017f429 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/rgb/readme.md @@ -0,0 +1 @@ +This is a keymap for the GH80-3700 with RGB enabled. diff --git a/keyboards/evyd13/gh80_3700/keymaps/rgb/rules.mk b/keyboards/evyd13/gh80_3700/keymaps/rgb/rules.mk new file mode 100644 index 0000000000..06d70d5811 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/rgb/rules.mk @@ -0,0 +1,4 @@ +# Build Options +# change yes to no to disable +# +RGBLIGHT_ENABLE = yes diff --git a/keyboards/evyd13/gh80_3700/keymaps/via/keymap.c b/keyboards/evyd13/gh80_3700/keymaps/via/keymap.c new file mode 100644 index 0000000000..aaf461e794 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + +[1] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + +[2] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + +[3] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/gh80_3700/keymaps/via/rules.mk b/keyboards/evyd13/gh80_3700/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/gh80_3700/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/gh80_3700/readme.md b/keyboards/evyd13/gh80_3700/readme.md new file mode 100644 index 0000000000..11366f9a14 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/readme.md @@ -0,0 +1,15 @@ +# GH80-3700 + + + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: GH80-3700 PCB +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/) + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/gh80_3700:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/gh80_3700/rules.mk b/keyboards/evyd13/gh80_3700/rules.mk new file mode 100644 index 0000000000..01ea4754f4 --- /dev/null +++ b/keyboards/evyd13/gh80_3700/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +ENCODER_ENABLE = yes # Enable support for rotary encoders + +LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/evyd13/minitomic/config.h b/keyboards/evyd13/minitomic/config.h new file mode 100644 index 0000000000..e6b9c80c5b --- /dev/null +++ b/keyboards/evyd13/minitomic/config.h @@ -0,0 +1,224 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x0145 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Minitomic +#define DESCRIPTION A 45% staggered keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B1,B3,D4,D6} +#define MATRIX_COL_PINS {C6,B6,B5,B4,D7,F0,F1,F4,F5,F6,F7,B7,E6} +#define UNUSED_PINS {B2,D0,D1,D2,D3,D5} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define QMK_ESC_OUTPUT C6 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED C7 diff --git a/keyboards/evyd13/minitomic/info.json b/keyboards/evyd13/minitomic/info.json new file mode 100644 index 0000000000..4af72b36e1 --- /dev/null +++ b/keyboards/evyd13/minitomic/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Minitomic", + "url": "", + "maintainer": "qmk", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT_split_space": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3, "w":1.25}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3, "w":1.75}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3}, {"x":9.25, "y":3, "w":1.25}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}] + }, + "LAYOUT_full_space": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3, "w":6.25}, {"x":9.5, "y":3}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}] + } + } +} diff --git a/keyboards/evyd13/minitomic/keymaps/default/keymap.c b/keyboards/evyd13/minitomic/keymaps/default/keymap.c new file mode 100644 index 0000000000..74c1e50230 --- /dev/null +++ b/keyboards/evyd13/minitomic/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //Low +#define _HI 2 //High + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_split_space( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_HI), KC_RALT, KC_APP, KC_RCTRL), \ + +[_LO] = LAYOUT_split_space( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \ + +[_HI] = LAYOUT_split_space( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \ + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +};
\ No newline at end of file diff --git a/keyboards/evyd13/minitomic/keymaps/default/readme.md b/keyboards/evyd13/minitomic/keymaps/default/readme.md new file mode 100644 index 0000000000..0ec508ffa3 --- /dev/null +++ b/keyboards/evyd13/minitomic/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Minitomic. diff --git a/keyboards/evyd13/minitomic/minitomic.c b/keyboards/evyd13/minitomic/minitomic.c new file mode 100644 index 0000000000..8d5f11a50d --- /dev/null +++ b/keyboards/evyd13/minitomic/minitomic.c @@ -0,0 +1,50 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "minitomic.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +void led_init_ports(void) { + //Set led pin as output, then high (off) + writePinHigh(C7); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + // writePin sets the pin high for 1 and low for 0. + // In this example the pins are inverted, setting + // it low/0 turns it on, and high/1 turns the LED off. + // This behavior depends on whether the LED is between the pin + // and VCC or the pin and GND. + writePin(C7, !led_state.caps_lock); + } + return res; +} + diff --git a/keyboards/evyd13/minitomic/minitomic.h b/keyboards/evyd13/minitomic/minitomic.h new file mode 100644 index 0000000000..da98ebcf12 --- /dev/null +++ b/keyboards/evyd13/minitomic/minitomic.h @@ -0,0 +1,53 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_split_space( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX }, \ + { k30, k31, k32, k33, k34, XXX, k36, k37, XXX, k39, k3a, k3b, XXX } \ +} + +#define LAYOUT_full_space( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k36, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX }, \ + { k30, k31, k32, XXX, XXX, XXX, k36, XXX, XXX, k39, k3a, k3b, XXX } \ +} diff --git a/keyboards/evyd13/minitomic/readme.md b/keyboards/evyd13/minitomic/readme.md new file mode 100644 index 0000000000..f4330d4d54 --- /dev/null +++ b/keyboards/evyd13/minitomic/readme.md @@ -0,0 +1,23 @@ +# Minitomic + + + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Minitomic +* Hardware Availability: [maartenwut.com](https://maartenwut.com) + + +## Features +- QMK Firmware +- European switch spacing (19mm) +- USB-C Connector +- Capslock indicator under tab key +- Reset button under left shift key + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/minitomic:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/minitomic/rules.mk b/keyboards/evyd13/minitomic/rules.mk new file mode 100644 index 0000000000..aac492de06 --- /dev/null +++ b/keyboards/evyd13/minitomic/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h new file mode 100644 index 0000000000..0b403e3a4a --- /dev/null +++ b/keyboards/evyd13/mx5160/config.h @@ -0,0 +1,224 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x5160 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT MX-5160 +#define DESCRIPTION Replacement PCB for the Chicony 5160c + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {C6,C7,B5,B6,D7,B4,D4,D6,D5,D3} +#define MATRIX_COL_PINS {D0,D1,D2,F7,F6,F5,F4,F1,F0,E6} +#define UNUSED_PINS {B7,B0} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// For QMK DFU +#define QMK_ESC_OUTPUT C6 +#define QMK_ESC_INPUT D1 +#define QMK_LED B1 +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/mx5160/info.json b/keyboards/evyd13/mx5160/info.json new file mode 100644 index 0000000000..af35cd70d6 --- /dev/null +++ b/keyboards/evyd13/mx5160/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "mx5160", + "url": "https://github.com/evyd13/mx-5160", + "maintainer": "qmk", + "width": 22, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":18, "y":0}, {"x":19, "y":0}, {"x":20, "y":0}, {"x":21, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.5, "y":1, "w":1.5}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1, "w":1.5}, {"x":18, "y":1}, {"x":19, "y":1}, {"x":20, "y":1}, {"x":21, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.5, "y":2, "w":1.75}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2}, {"x":15.25, "y":2}, {"x":16.25, "y":2, "w":1.25}, {"x":18, "y":2}, {"x":19, "y":2}, {"x":20, "y":2}, {"x":21, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.75}, {"x":16.5, "y":3}, {"x":18, "y":3}, {"x":19, "y":3}, {"x":20, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":1.5}, {"x":6.5, "y":4, "w":7}, {"x":13.5, "y":4, "w":1.5}, {"x":16, "y":4, "w":1.5}, {"x":18, "y":4}, {"x":19, "y":4}, {"x":20, "y":4}, {"x":21, "y":3, "h":2}] + } + } +}
\ No newline at end of file diff --git a/keyboards/evyd13/mx5160/keymaps/default/keymap.c b/keyboards/evyd13/mx5160/keymaps/default/keymap.c new file mode 100644 index 0000000000..ad198fe29e --- /dev/null +++ b/keyboards/evyd13/mx5160/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _FN 1 //Main layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_all( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, _______, \ + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _______, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_F7, KC_F8, KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _______, KC_P1, KC_P2, KC_P3, \ + KC_F9, KC_F10, KC_LCTL, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_P0, _______, KC_PDOT, KC_PENT), \ + +[_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_PSCR, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +}; diff --git a/keyboards/evyd13/mx5160/keymaps/default/readme.md b/keyboards/evyd13/mx5160/keymaps/default/readme.md new file mode 100644 index 0000000000..c938677352 --- /dev/null +++ b/keyboards/evyd13/mx5160/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the mx-5160 PCB.
\ No newline at end of file diff --git a/keyboards/evyd13/mx5160/mx5160.c b/keyboards/evyd13/mx5160/mx5160.c new file mode 100644 index 0000000000..c9e412da24 --- /dev/null +++ b/keyboards/evyd13/mx5160/mx5160.c @@ -0,0 +1,58 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mx5160.h" + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +void led_init_ports(void) { + //Set led pin as output, then high (off) + + //Caps lock + setPinOutput(B1); + writePinHigh(B1); + + //Num lock + setPinOutput(B2); + writePinHigh(B2); + + //Scroll lock + setPinOutput(B3); + writePinHigh(B3); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + writePin(B2, !led_state.num_lock); + writePin(B1, !led_state.caps_lock); + writePin(B3, !led_state.scroll_lock); + } + return res; +} diff --git a/keyboards/evyd13/mx5160/mx5160.h b/keyboards/evyd13/mx5160/mx5160.h new file mode 100644 index 0000000000..7486e62667 --- /dev/null +++ b/keyboards/evyd13/mx5160/mx5160.h @@ -0,0 +1,47 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k87, k17, k08, k18, k09, k19, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, k28, k38, k29, k39, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, k48, k58, k49, k59, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77, k68, k78, k69, \ + k80, k90, k81, k82, k94, k96, k97, k88, k98, k89, k99 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77, k78, XXX }, \ + { k80, k81, k82, XXX, XXX, XXX, XXX, k87, k88, k89 }, \ + { k90, XXX, XXX, XXX, k94, XXX, k96, k97, k98, k99 } \ +} diff --git a/keyboards/evyd13/mx5160/readme.md b/keyboards/evyd13/mx5160/readme.md new file mode 100644 index 0000000000..677b16072d --- /dev/null +++ b/keyboards/evyd13/mx5160/readme.md @@ -0,0 +1,15 @@ +# mx5160 + + + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: mx-5160 (Chicony 5160c case) +* Hardware Availability: [GitHub](https://github.com/evyd13/mx-5160) + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/mx5160:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk new file mode 100644 index 0000000000..400781b07f --- /dev/null +++ b/keyboards/evyd13/mx5160/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/nt660/config.h b/keyboards/evyd13/nt660/config.h new file mode 100644 index 0000000000..b29d0d532f --- /dev/null +++ b/keyboards/evyd13/nt660/config.h @@ -0,0 +1,228 @@ +/* +Copyright 2020 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x1F02 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT nt660 +#define DESCRIPTION Replacement PCB for Leopold FC660M + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS {B7,E6,F6,F7,C7} +#define MATRIX_COL_PINS {D6,D7,B4,B5,B6,C6,B0,B1,B2,B3,F0,F1,F4,F5,D4} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define QMK_ESC_OUTPUT D6 // usually COL +#define QMK_ESC_INPUT B7 // usually ROW +#define QMK_LED D0 diff --git a/keyboards/evyd13/nt660/info.json b/keyboards/evyd13/nt660/info.json new file mode 100644 index 0000000000..371fd9a05e --- /dev/null +++ b/keyboards/evyd13/nt660/info.json @@ -0,0 +1,234 @@ +{ + "keyboard_name": "nt660", + "url": "", + "maintainer": "evyd13", + "width": 16.5, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0f", "x":13, "y":0, "w":2}, + {"label":"k0d", "x":15.5, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k1f", "x":13.5, "y":1, "w":1.5}, + {"label":"k1d", "x":15.5, "y":1}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k2c", "x":12.75, "y":2}, + {"label":"k2f", "x":13.75, "y":2, "w":1.25}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":2.25}, + {"label":"k3f", "x":14.5, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4}, + {"label":"k42", "x":2.25, "y":4, "w":1.25}, + {"label":"k46", "x":3.5, "y":4, "w":6.25}, + {"label":"k49", "x":9.75, "y":4, "w":1.25}, + {"label":"k4a", "x":11, "y":4, "w":1.25}, + {"label":"k4b", "x":12.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13.5, "y":4}, + {"label":"k4f", "x":14.5, "y":4}, + {"label":"k4d", "x":15.5, "y":4} + ] + }, + "LAYOUT_66_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Insert", "x":15.5, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.25}, + {"label":"\u2191", "x":14.5, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4}, + {"label":"Alt", "x":2.25, "y":4, "w":1.25}, + {"x":3.5, "y":4, "w":6.25}, + {"label":"Alt", "x":9.75, "y":4, "w":1.25}, + {"label":"Win", "x":11, "y":4, "w":1.25}, + {"label":"Menu", "x":12.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13.5, "y":4}, + {"label":"\u2193", "x":14.5, "y":4}, + {"label":"\u2192", "x":15.5, "y":4} + ] + }, + "LAYOUT_66_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Insert", "x":15.5, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Delete", "x":15.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"|", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"NUBS", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.25}, + {"label":"\u2191", "x":14.5, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4}, + {"label":"Alt", "x":2.25, "y":4, "w":1.25}, + {"x":3.5, "y":4, "w":6.25}, + {"label":"Alt", "x":9.75, "y":4, "w":1.25}, + {"label":"Win", "x":11, "y":4, "w":1.25}, + {"label":"Menu", "x":12.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13.5, "y":4}, + {"label":"\u2193", "x":14.5, "y":4}, + {"label":"\u2192", "x":15.5, "y":4} + ] + } + } +} diff --git a/keyboards/evyd13/nt660/keymaps/default/keymap.c b/keyboards/evyd13/nt660/keymaps/default/keymap.c new file mode 100644 index 0000000000..5c9e1b22f0 --- /dev/null +++ b/keyboards/evyd13/nt660/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL,KC_LEFT, KC_DOWN, KC_RGHT), +}; diff --git a/keyboards/evyd13/nt660/keymaps/evyd13/config.h b/keyboards/evyd13/nt660/keymaps/evyd13/config.h new file mode 100644 index 0000000000..9b18f58269 --- /dev/null +++ b/keyboards/evyd13/nt660/keymaps/evyd13/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define RETRO_TAPPING diff --git a/keyboards/evyd13/nt660/keymaps/evyd13/keymap.c b/keyboards/evyd13/nt660/keymaps/evyd13/keymap.c new file mode 100644 index 0000000000..b7eaa5d6c1 --- /dev/null +++ b/keyboards/evyd13/nt660/keymaps/evyd13/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _MA 0 +#define _GA 1 +#define _FL 2 +#define _SP 3 + +#define SPACE LT(_SP, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPLY, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _______, KC_ENT, + KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, SPACE, KC_RALT, KC_RCTRL,MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + +[_GA] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______), + +[_FL] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[_SP] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/nt660/keymaps/via/keymap.c b/keyboards/evyd13/nt660/keymaps/via/keymap.c new file mode 100644 index 0000000000..39d37390f5 --- /dev/null +++ b/keyboards/evyd13/nt660/keymaps/via/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTRL,KC_LEFT, KC_DOWN, KC_RGHT), +[1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/nt660/keymaps/via/rules.mk b/keyboards/evyd13/nt660/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/nt660/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/nt660/nt660.c b/keyboards/evyd13/nt660/nt660.c new file mode 100644 index 0000000000..2a8ebfb46c --- /dev/null +++ b/keyboards/evyd13/nt660/nt660.c @@ -0,0 +1,32 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "nt660.h" +void matrix_init_kb(void) { + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(D0); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(D0, !led_state.caps_lock); + } + + return true; +} diff --git a/keyboards/evyd13/nt660/nt660.h b/keyboards/evyd13/nt660/nt660.h new file mode 100644 index 0000000000..ce9f98f54a --- /dev/null +++ b/keyboards/evyd13/nt660/nt660.h @@ -0,0 +1,73 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1f, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2f, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4f, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1f, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2f, XXX}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4f, k4d} \ +} +#define LAYOUT_66_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1f, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2f, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4f, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1f, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2f, XXX}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4f, k4d} \ +} + +#define LAYOUT_66_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2f, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4f, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2f, XXX}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3f, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, k4a, k4b, k4c, k4f, k4d} \ +} diff --git a/keyboards/evyd13/nt660/readme.md b/keyboards/evyd13/nt660/readme.md new file mode 100644 index 0000000000..ddd2cc713f --- /dev/null +++ b/keyboards/evyd13/nt660/readme.md @@ -0,0 +1,19 @@ +# nt660 + +A drop-in replacement PCB for the Leopold FC660M. + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: nt660 PCB +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/nt-660/) + +## Flashing + +In place of the DIP switches on the original PCB there is a small button. Press that to jump to the bootloader. + +--- + +Make example for this keyboard (after setting up your build environment): + + make evyd13/nt660:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk new file mode 100644 index 0000000000..9f8f0cd896 --- /dev/null +++ b/keyboards/evyd13/nt660/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/evyd13/omrontkl/config.h b/keyboards/evyd13/omrontkl/config.h new file mode 100644 index 0000000000..a72a6ce5c7 --- /dev/null +++ b/keyboards/evyd13/omrontkl/config.h @@ -0,0 +1,220 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xEA78 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT OmronTKL +#define DESCRIPTION A TKL PCB for Omron switches + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D0,D1,D2,D3,D4,B7} +#define MATRIX_COL_PINS {F0,C7,F1,C6,F4,B6,F5,B5,F6,B4,F7,D7,D6,D5,B3,B1,B2} +#define UNUSED_PINS {E6,B0} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN D0 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 12 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/omrontkl/info.json b/keyboards/evyd13/omrontkl/info.json new file mode 100644 index 0000000000..faf9569644 --- /dev/null +++ b/keyboards/evyd13/omrontkl/info.json @@ -0,0 +1,299 @@ +{ + "keyboard_name": "OmronTKL", + "url": "", + "maintainer": "qmk", + "width": 18.25, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25}, + {"x":14, "y":1.25}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":3.25, "w":1.25}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":1.75}, + {"x":14, "y":4.25}, + {"x":16.25, "y":4.25}, + + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25, "w":1.25}, + {"x":2.75, "y":5.25, "w":1.5}, + {"x":4.25, "y":5.25, "w":6.5}, + {"x":10.75, "y":5.25, "w":1.5}, + {"x":12.25, "y":5.25, "w":1.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25, "w":2.25}, + + {"x":0, "y":4.25, "w":2.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25, "w":1.25}, + {"x":2.75, "y":5.25, "w":1.5}, + {"x":4.25, "y":5.25, "w":6.5}, + {"x":10.75, "y":5.25, "w":1.5}, + {"x":12.25, "y":5.25, "w":1.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25, "w":1.25}, + {"x":2.75, "y":5.25, "w":1.5}, + {"x":4.25, "y":5.25, "w":6.5}, + {"x":10.75, "y":5.25, "w":1.5}, + {"x":12.25, "y":5.25, "w":1.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + } + } +} diff --git a/keyboards/evyd13/omrontkl/keymaps/default/keymap.c b/keyboards/evyd13/omrontkl/keymaps/default/keymap.c new file mode 100644 index 0000000000..c532d60ae6 --- /dev/null +++ b/keyboards/evyd13/omrontkl/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _FN 1 //Main layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), +[_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/evyd13/omrontkl/omrontkl.c b/keyboards/evyd13/omrontkl/omrontkl.c new file mode 100644 index 0000000000..26d0344d33 --- /dev/null +++ b/keyboards/evyd13/omrontkl/omrontkl.c @@ -0,0 +1,16 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "omrontkl.h" diff --git a/keyboards/evyd13/omrontkl/omrontkl.h b/keyboards/evyd13/omrontkl/omrontkl.h new file mode 100644 index 0000000000..207eedfb47 --- /dev/null +++ b/keyboards/evyd13/omrontkl/omrontkl.h @@ -0,0 +1,79 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k0d, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4f, \ + k50, k51, k52, k56, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, XXX, k5b, k5c, k5d, k5e, k5f, k5g } \ +} + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \ + k50, k51, k52, k56, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d, XXX, XXX, XXX }, \ + { k40, XXX, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, XXX, k5b, k5c, k5d, k5e, k5f, k5g } \ +} + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4f, \ + k50, k51, k52, k56, k5b, k5c, k5d, k5e, k5f, k5g \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e, k0f, k0g }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e, k2f, k2g }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, XXX, XXX }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, XXX, XXX, k4f, XXX }, \ + { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, XXX, XXX, k5b, k5c, k5d, k5e, k5f, k5g } \ +} diff --git a/keyboards/evyd13/omrontkl/readme.md b/keyboards/evyd13/omrontkl/readme.md new file mode 100644 index 0000000000..e45117c27c --- /dev/null +++ b/keyboards/evyd13/omrontkl/readme.md @@ -0,0 +1,13 @@ +# OmronTKL + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: OmronTKL +* Hardware Availability: none + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/omrontkl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk new file mode 100644 index 0000000000..8fc9b9c73d --- /dev/null +++ b/keyboards/evyd13/omrontkl/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/plain60/config.h b/keyboards/evyd13/plain60/config.h new file mode 100644 index 0000000000..9eb5d6307b --- /dev/null +++ b/keyboards/evyd13/plain60/config.h @@ -0,0 +1,49 @@ +/* +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x0160 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Plain60 +#define DESCRIPTION A plain 60% PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B4,D7,D6,D4,E6} +#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,B5,F0,B6,C6,C7,F1,F4,F5,F6,F7} + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define QMK_ESC_OUTPUT D2 // usually COL +#define QMK_ESC_INPUT B4 // usually ROW diff --git a/keyboards/evyd13/plain60/info.json b/keyboards/evyd13/plain60/info.json new file mode 100644 index 0000000000..48aad441fb --- /dev/null +++ b/keyboards/evyd13/plain60/info.json @@ -0,0 +1,502 @@ +{ + "keyboard_name": "Plain60", + "url": "", + "maintainer": "evyd13", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2}, + {"x": 13.75, "y": 2, "w": 1.25}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + }, + "LAYOUT_60_ansi": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 2.75}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + }, + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + }, + "LAYOUT_60_hhkb": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4} + ] + }, + "LAYOUT_60_iso": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2}, + {"x": 13.75, "y": 1, "w": 1.25, "h": 2}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 2.75}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + }, + "LAYOUT_60_iso_split_bs_rshift": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2}, + {"x": 13.75, "y": 1, "w": 1.25, "h": 2}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + }, + "LAYOUT_60_tsangan_hhkb": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5} + ] + } + } +} diff --git a/keyboards/evyd13/plain60/keymaps/audio/config.h b/keyboards/evyd13/plain60/keymaps/audio/config.h new file mode 100644 index 0000000000..9a43b7fbe3 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/audio/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define B7_AUDIO diff --git a/keyboards/evyd13/plain60/keymaps/audio/keymap.c b/keyboards/evyd13/plain60/keymaps/audio/keymap.c new file mode 100644 index 0000000000..91ac37501c --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/audio/keymap.c @@ -0,0 +1,27 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum _layers { + _MA, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + AU_TOG, MU_TOG, MU_MOD, CK_TOGG, _______, _______, _______, _______) +}; diff --git a/keyboards/evyd13/plain60/keymaps/audio/rules.mk b/keyboards/evyd13/plain60/keymaps/audio/rules.mk new file mode 100644 index 0000000000..600978d17e --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/audio/rules.mk @@ -0,0 +1,4 @@ +AUDIO_ENABLE = yes +RAW_ENABLE = no +DYNAMIC_KEYMAP_ENABLE = no + diff --git a/keyboards/evyd13/plain60/keymaps/default/keymap.c b/keyboards/evyd13/plain60/keymaps/default/keymap.c new file mode 100644 index 0000000000..2e23dece01 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum _layer { + _MA, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/config.h b/keyboards/evyd13/plain60/keymaps/kwerdenker/config.h new file mode 100644 index 0000000000..5fadcf821a --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/config.h @@ -0,0 +1,26 @@ +/* +Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* RGB Underglow */ +#define RGB_DI_PIN B7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 30 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c new file mode 100644 index 0000000000..25370823df --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/keymap.c @@ -0,0 +1,57 @@ +/* +Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +#include "keymap_extras/keymap_german.h" + +//Layer renaming +#define _DL 0 //default +#define _FUN 1 //function layer +#define _LED 2 //LED configurations + +//Keymapping renaming +#define ______ KC_TRNS //renaming KC_TRNS for readability in keymaps +#define RGB_MI RGB_MODE_FORWARD //increase RGB mode +#define RGB_MD RGB_MODE_REVERSE //decrease RGB mode +#define RGB_ST RGB_M_P //rgb static +#define MONKEY LCTL(LALT(KC_DEL)) //ctrl+alt+del == monkey grip +#define SPECIAL LT(_FUN, DE_CIRC) // + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_DL] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, DE_SS, DE_ACUT, ______, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, DE_UE, DE_PLUS, ______, \ + SPECIAL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_OE, DE_AE, DE_HASH, KC_ENT, \ + KC_LSFT, DE_LESS, DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, MONKEY, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , ______, KC_ALGR, TG(_LED), KC_RCTL ), + + [_FUN] = LAYOUT( + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ______, KC_DEL, \ + ______, KC_PGUP, KC_UP, KC_PGDN, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_HOME, ______, ______, KC_END, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_UP, ______, \ + ______, ______, ______, ______ , ______, KC_LEFT, KC_DOWN, KC_RIGHT ), + + [_LED] = LAYOUT( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, RESET, \ + ______, RGB_TOG, RGB_MI, RGB_MD, RGB_ST, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, RGB_VAI, RGB_VAD, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______ , ______, ______, TG(_LED), ______ ), +}; diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk b/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk new file mode 100644 index 0000000000..facc9dc7e6 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk @@ -0,0 +1,22 @@ +#Copyright 2019 Sebastian Spindler <sebastian.spindler@gmail.com> + +#This program is free software: you can redistribute it and/or modify +#it under the terms of the GNU General Public License as published by +#the Free Software Foundation, either version 2 of the License, or +#(at your option) any later version. + +#This program is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) + diff --git a/keyboards/evyd13/plain60/keymaps/rgb/config.h b/keyboards/evyd13/plain60/keymaps/rgb/config.h new file mode 100644 index 0000000000..8426938120 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/rgb/config.h @@ -0,0 +1,8 @@ +#pragma once + +#define RGB_DI_PIN B0 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 // limit to 20 otherwise brownouts +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/evyd13/plain60/keymaps/rgb/keymap.c b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c new file mode 100644 index 0000000000..abfb5f6b15 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/rgb/keymap.c @@ -0,0 +1,27 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum _layers { + _MA, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/evyd13/plain60/keymaps/rgb/rules.mk b/keyboards/evyd13/plain60/keymaps/rgb/rules.mk new file mode 100644 index 0000000000..b6cd87b7d4 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/rgb/rules.mk @@ -0,0 +1,3 @@ +RGBLIGHT_ENABLE = yes +RAW_ENABLE = no +DYNAMIC_KEYMAP_ENABLE = no diff --git a/keyboards/evyd13/plain60/keymaps/via/keymap.c b/keyboards/evyd13/plain60/keymaps/via/keymap.c new file mode 100644 index 0000000000..a500f23896 --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/via/keymap.c @@ -0,0 +1,32 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL), + +[1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/plain60/keymaps/via/rules.mk b/keyboards/evyd13/plain60/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/evyd13/plain60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/evyd13/plain60/plain60.c b/keyboards/evyd13/plain60/plain60.c new file mode 100644 index 0000000000..d816064104 --- /dev/null +++ b/keyboards/evyd13/plain60/plain60.c @@ -0,0 +1 @@ +#include "plain60.h" diff --git a/keyboards/evyd13/plain60/plain60.h b/keyboards/evyd13/plain60/plain60.h new file mode 100644 index 0000000000..87688e9ede --- /dev/null +++ b/keyboards/evyd13/plain60/plain60.h @@ -0,0 +1,114 @@ +#pragma once + +#include "quantum.h" + +// readability +#define XXX KC_NO + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \ +} + +#define LAYOUT_60_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \ +} + +#define LAYOUT_60_hhkb( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k41, k42, k46, k4b, k4c \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ + {XXX, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4b, k4c, XXX, XXX} \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4b, k4c, k4d, XXX} \ +} + +#define LAYOUT_60_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \ +} + +#define LAYOUT_60_iso_split_bs_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, XXX}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, XXX} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); diff --git a/keyboards/evyd13/plain60/readme.md b/keyboards/evyd13/plain60/readme.md new file mode 100644 index 0000000000..5ed19f0e7e --- /dev/null +++ b/keyboards/evyd13/plain60/readme.md @@ -0,0 +1,14 @@ +Plain60-C and Plain60-B +====== + +A plain 60% PCB with USB-C. + +Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +Hardware Supported: Plain60-C and Plain60-B +Hardware Availability: https://github.com/evyd13/plain60-c + +Make example for this keyboard (after setting up your build environment): + + make plain60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/plain60/rules.mk b/keyboards/evyd13/plain60/rules.mk new file mode 100644 index 0000000000..398b59227d --- /dev/null +++ b/keyboards/evyd13/plain60/rules.mk @@ -0,0 +1,30 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb diff --git a/keyboards/evyd13/pockettype/config.h b/keyboards/evyd13/pockettype/config.h new file mode 100644 index 0000000000..fd2e0a8d07 --- /dev/null +++ b/keyboards/evyd13/pockettype/config.h @@ -0,0 +1,220 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xFA7D +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT PocketType +#define DESCRIPTION A small 4x12 ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D3,D1,D7,B5} +#define MATRIX_COL_PINS {F6,F7,B1,B3,B2,B6,B4,E6,C6,D4,D0,D2} +#define UNUSED_PINS {B1,B2,B3} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/pockettype/info.json b/keyboards/evyd13/pockettype/info.json new file mode 100644 index 0000000000..d1999273f6 --- /dev/null +++ b/keyboards/evyd13/pockettype/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "PocketType", + "url": "https://mechboards.co.uk/shop/kits/pockettype/", + "maintainer": "evyd13", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x12": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + } + } +} diff --git a/keyboards/evyd13/pockettype/keymaps/default/keymap.c b/keyboards/evyd13/pockettype/keymaps/default/keymap.c new file mode 100644 index 0000000000..5ca7326c00 --- /dev/null +++ b/keyboards/evyd13/pockettype/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //Low +#define _HI 2 //High + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_ortho_4x12( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(_LO), KC_SPC, KC_BSPC, MO(_HI), KC_LEFT, KC_DOWN, KC_UP, KC_MPLY), + +[_LO] = LAYOUT_ortho_4x12( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), + +[_HI] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +}; diff --git a/keyboards/evyd13/pockettype/keymaps/default/readme.md b/keyboards/evyd13/pockettype/keymaps/default/readme.md new file mode 100644 index 0000000000..281fa6485d --- /dev/null +++ b/keyboards/evyd13/pockettype/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the PocketType. diff --git a/keyboards/evyd13/pockettype/pockettype.c b/keyboards/evyd13/pockettype/pockettype.c new file mode 100644 index 0000000000..7404ac82b8 --- /dev/null +++ b/keyboards/evyd13/pockettype/pockettype.c @@ -0,0 +1,39 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "pockettype.h" + +void matrix_init_kb(void) { + led_init_ports(); + + matrix_init_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output and high + setPinOutput(F5); + writePinHigh(F5); + + setPinOutput(F4); + writePinLow(F4); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(F5, !led_state.caps_lock); + } + + return true; +} diff --git a/keyboards/evyd13/pockettype/pockettype.h b/keyboards/evyd13/pockettype/pockettype.h new file mode 100644 index 0000000000..8c103dcc8f --- /dev/null +++ b/keyboards/evyd13/pockettype/pockettype.h @@ -0,0 +1,40 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/evyd13/pockettype/readme.md b/keyboards/evyd13/pockettype/readme.md new file mode 100644 index 0000000000..c32568a800 --- /dev/null +++ b/keyboards/evyd13/pockettype/readme.md @@ -0,0 +1,13 @@ +# PocketType + +## Support +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: PocketType +* Hardware Availability: [mechboards.co.uk](https://mechboards.co.uk/shop/kits/pockettype/) + +## Build +Make example for this keyboard (after setting up your build environment): + + make evyd13/pockettype:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/evyd13/pockettype/rules.mk b/keyboards/evyd13/pockettype/rules.mk new file mode 100644 index 0000000000..164bf9cef5 --- /dev/null +++ b/keyboards/evyd13/pockettype/rules.mk @@ -0,0 +1,31 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +LAYOUTS = ortho_4x12 diff --git a/keyboards/evyd13/quackfire/config.h b/keyboards/evyd13/quackfire/config.h new file mode 100644 index 0000000000..22083e8118 --- /dev/null +++ b/keyboards/evyd13/quackfire/config.h @@ -0,0 +1,147 @@ +/* +Copyright 2020 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x87C9 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Quackfire + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {D3,F5,F4,F0,B7,B2,E6,B0} +#define MATRIX_COL_PINS {B3,F1,B1,D5,D2,D1,D0,D4,D6,D7,B4,B5,B6,C6,C7} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 5 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 6 +#define BOOTMAGIC_LITE_COLUMN 5 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/evyd13/quackfire/info.json b/keyboards/evyd13/quackfire/info.json new file mode 100644 index 0000000000..de7c9384cf --- /dev/null +++ b/keyboards/evyd13/quackfire/info.json @@ -0,0 +1,212 @@ +{ + "keyboard_name": "Quackfire", + "url": "https://github.com/evyd13/quackfire-controller", + "maintainer": "evyd13", + "width": 18.5, + "height": 6.5, + "layouts": { + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"Page Up", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/evyd13/quackfire/keymaps/default/keymap.c b/keyboards/evyd13/quackfire/keymaps/default/keymap.c new file mode 100644 index 0000000000..79b0a7ebd6 --- /dev/null +++ b/keyboards/evyd13/quackfire/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + */ + LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + LAYOUT_tkl_ansi( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/quackfire/keymaps/via/keymap.c b/keyboards/evyd13/quackfire/keymaps/via/keymap.c new file mode 100644 index 0000000000..623e8fdc2d --- /dev/null +++ b/keyboards/evyd13/quackfire/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/quackfire/keymaps/via/rules.mk b/keyboards/evyd13/quackfire/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/quackfire/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/quackfire/quackfire.c b/keyboards/evyd13/quackfire/quackfire.c new file mode 100644 index 0000000000..ab233bd6d4 --- /dev/null +++ b/keyboards/evyd13/quackfire/quackfire.c @@ -0,0 +1,44 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "quackfire.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(F6); + setPinOutput(F7); + writePinHigh(F6); + writePinHigh(F7); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(F7, !led_state.caps_lock); + writePin(F6, !led_state.scroll_lock); + } + + return true; +} diff --git a/keyboards/evyd13/quackfire/quackfire.h b/keyboards/evyd13/quackfire/quackfire.h new file mode 100644 index 0000000000..8746f356fd --- /dev/null +++ b/keyboards/evyd13/quackfire/quackfire.h @@ -0,0 +1,69 @@ +/* Copyright 2020 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all LAYOUT_tkl_iso + +#define LAYOUT_tkl_ansi( \ + k3e, k0d, k0b, k4b, k3b, k21, k36, k45, k05, k03, k23, k33, k63, k28, k18, k11, \ + k0e, k2e, k2d, k2b, k29, k09, k07, k27, k26, k25, k24, k04, k06, k43, k02, k0a, k0c, \ + k4e, k1e, k1d, k1b, k19, k49, k47, k17, k16, k15, k14, k44, k46, k73, k00, k2a, k2c, \ + k4d, k7e, k7d, k7b, k79, k39, k37, k77, k76, k75, k74, k34, k53, \ + k4c, k5e, k5d, k5b, k59, k69, k67, k57, k56, k55, k64, k7c, k3a, \ + k01, k4a, k38, k30, k68, k71, k65, k51, k6a, k60, k62 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, XXX, k09, k0a, k0b, k0c, k0d, k0e }, \ + { XXX, k11, XXX, XXX, k14, k15, k16, k17, k18, k19, XXX, k1b, XXX, k1d, k1e }, \ + { XXX, k21, XXX, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \ + { k30, XXX, XXX, k33, k34, XXX, k36, k37, k38, k39, k3a, k3b, XXX, XXX, k3e }, \ + { XXX, XXX, XXX, k43, k44, k45, k46, k47, XXX, k49, k4a, k4b, k4c, k4d, k4e }, \ + { XXX, k51, XXX, k53, XXX, k55, k56, k57, XXX, k59, XXX, k5b, XXX, k5d, k5e }, \ + { k60, XXX, k62, k63, k64, k65, XXX, k67, k68, k69, k6a, XXX, XXX, XXX, XXX }, \ + { XXX, k71, XXX, k73, k74, k75, k76, k77, XXX, k79, XXX, k7b, k7c, k7d, k7e } \ +} + +#define LAYOUT_tkl_iso( \ + k3e, k0d, k0b, k4b, k3b, k21, k36, k45, k05, k03, k23, k33, k63, k28, k18, k11, \ + k0e, k2e, k2d, k2b, k29, k09, k07, k27, k26, k25, k24, k04, k06, k43, k02, k0a, k0c, \ + k4e, k1e, k1d, k1b, k19, k49, k47, k17, k16, k15, k14, k44, k46, k00, k2a, k2c, \ + k4d, k7e, k7d, k7b, k79, k39, k37, k77, k76, k75, k74, k34, k73, k53, \ + k4c, k3d, k5e, k5d, k5b, k59, k69, k67, k57, k56, k55, k64, k7c, k3a, \ + k01, k4a, k38, k30, k68, k71, k65, k51, k6a, k60, k62 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, XXX, k09, k0a, k0b, k0c, k0d, k0e }, \ + { XXX, k11, XXX, XXX, k14, k15, k16, k17, k18, k19, XXX, k1b, XXX, k1d, k1e }, \ + { XXX, k21, XXX, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \ + { k30, XXX, XXX, k33, k34, XXX, k36, k37, k38, k39, k3a, k3b, XXX, k3d, k3e }, \ + { XXX, XXX, XXX, k43, k44, k45, k46, k47, XXX, k49, k4a, k4b, k4c, k4d, k4e }, \ + { XXX, k51, XXX, k53, XXX, k55, k56, k57, XXX, k59, XXX, k5b, XXX, k5d, k5e }, \ + { k60, XXX, k62, k63, k64, k65, XXX, k67, k68, k69, k6a, XXX, XXX, XXX, XXX }, \ + { XXX, k71, XXX, k73, k74, k75, k76, k77, XXX, k79, XXX, k7b, k7c, k7d, k7e } \ +} diff --git a/keyboards/evyd13/quackfire/readme.md b/keyboards/evyd13/quackfire/readme.md new file mode 100644 index 0000000000..3844169628 --- /dev/null +++ b/keyboards/evyd13/quackfire/readme.md @@ -0,0 +1,19 @@ +# Quackfire + +A drop-in replacement controller for the CM Quickfire Rapid. Not for the Quickfire Rapid-I! + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Quackfire controller +* Hardware Availability: [Open source on GitHub](https://github.com/evyd13/quackfire-controller) + +## Flashing + +To get to the bootloader, hold Fn while plugging in the keyboard. You can also press Fn + Esc on the default layout. + +--- + +Make example for this keyboard (after setting up your build environment): + + make evyd13/quackfire:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/quackfire/rules.mk b/keyboards/evyd13/quackfire/rules.mk new file mode 100644 index 0000000000..f29136f744 --- /dev/null +++ b/keyboards/evyd13/quackfire/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/solheim68/config.h b/keyboards/evyd13/solheim68/config.h new file mode 100644 index 0000000000..d61e095f1d --- /dev/null +++ b/keyboards/evyd13/solheim68/config.h @@ -0,0 +1,143 @@ +/* Copyright 2020 Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x7BFF +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Solheim68 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {E6,B0,B1,B2,B3} +#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,C7,C6,B6,B5,B4,D7,D6,D4,D5,D3} +#define UNUSED_PINS {B7,D0,D1,D2} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/evyd13/solheim68/info.json b/keyboards/evyd13/solheim68/info.json new file mode 100644 index 0000000000..dbafbc0d4d --- /dev/null +++ b/keyboards/evyd13/solheim68/info.json @@ -0,0 +1,397 @@ +{ + "keyboard_name": "Solheim68", + "url": "https://github.com/evyd13/solheim68", + "maintainer": "evyd13", + "width": 17.25, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":2, "w":1.25}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":14.25, "y":4}, + {"x":15.25, "y":4}, + {"x":16.25, "y":4} + ] + }, + "LAYOUT_68_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + {"x":15.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":14.25, "y":4}, + {"x":15.25, "y":4}, + {"x":16.25, "y":4} + ] + }, + "LAYOUT_68_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + {"x":15.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":14.25, "y":4}, + {"x":15.25, "y":4}, + {"x":16.25, "y":4} + ] + }, + "LAYOUT_68_ansi_split_rshift": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":14.25, "y":4}, + {"x":15.25, "y":4}, + {"x":16.25, "y":4} + ] + }, + "LAYOUT_68_iso_split_rshift": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":14.25, "y":4}, + {"x":15.25, "y":4}, + {"x":16.25, "y":4} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/evyd13/solheim68/keymaps/default/keymap.c b/keyboards/evyd13/solheim68/keymaps/default/keymap.c new file mode 100644 index 0000000000..728e8019a2 --- /dev/null +++ b/keyboards/evyd13/solheim68/keymaps/default/keymap.c @@ -0,0 +1,31 @@ +/* Copyright 2020 Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_MPLY, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_PSCR, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/solheim68/keymaps/default/readme.md b/keyboards/evyd13/solheim68/keymaps/default/readme.md new file mode 100644 index 0000000000..6e9745403b --- /dev/null +++ b/keyboards/evyd13/solheim68/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Solheim68.
\ No newline at end of file diff --git a/keyboards/evyd13/solheim68/readme.md b/keyboards/evyd13/solheim68/readme.md new file mode 100644 index 0000000000..5d1d84c80d --- /dev/null +++ b/keyboards/evyd13/solheim68/readme.md @@ -0,0 +1,17 @@ +# Solheim68 + +A replacement PCB for the VA68M (v2) with Mini-USB. + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: Solheim68 PCB +* Hardware Availability: [Open source on GitHub](https://github.com/evyd13/solheim68) + +Make example for this keyboard (after setting up your build environment): + + make evyd13/solheim68:default + +Flashing example for this keyboard: + + make evyd13/solheim68:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/solheim68/rules.mk b/keyboards/evyd13/solheim68/rules.mk new file mode 100644 index 0000000000..a90eef1fc6 --- /dev/null +++ b/keyboards/evyd13/solheim68/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/solheim68/solheim68.c b/keyboards/evyd13/solheim68/solheim68.c new file mode 100644 index 0000000000..27f90f4e87 --- /dev/null +++ b/keyboards/evyd13/solheim68/solheim68.c @@ -0,0 +1,16 @@ +/* Copyright 2020 Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "solheim68.h" diff --git a/keyboards/evyd13/solheim68/solheim68.h b/keyboards/evyd13/solheim68/solheim68.h new file mode 100644 index 0000000000..2f6339bd10 --- /dev/null +++ b/keyboards/evyd13/solheim68/solheim68.h @@ -0,0 +1,102 @@ +/* Copyright 2020 Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k2e, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \ +} + +#define LAYOUT_68_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \ +} + +#define LAYOUT_68_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \ +} + +#define LAYOUT_68_ansi_split_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, XXX, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \ +} + +#define LAYOUT_68_iso_split_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d, k4e, k4f \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, XXX }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d, k4e, k4f } \ +} diff --git a/keyboards/evyd13/ta65/config.h b/keyboards/evyd13/ta65/config.h new file mode 100644 index 0000000000..b73505c016 --- /dev/null +++ b/keyboards/evyd13/ta65/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x7465 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT ta-65 +#define DESCRIPTION A universal 65% PCB with underglow. + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3} +#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0} +#define UNUSED_PINS + +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B1 } + +/* Uncomment if your encoder doesn't react to every turn or skips */ +//#define ENCODER_RESOLUTION 2 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Backlight configuration + */ +#define RGB_DI_PIN E6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 + +#define QMK_ESC_OUTPUT D2 // usually COL +#define QMK_ESC_INPUT B4 // usually ROW +#define QMK_LED E6 diff --git a/keyboards/evyd13/ta65/info.json b/keyboards/evyd13/ta65/info.json new file mode 100644 index 0000000000..e509521d4d --- /dev/null +++ b/keyboards/evyd13/ta65/info.json @@ -0,0 +1,372 @@ +{ + "keyboard_name": "ta65", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"|", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"~", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Non-US Hash", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"Non-US Backslash", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Up", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Win", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"Left", "x":13, "y":4}, + {"label":"Down", "x":14, "y":4}, + {"label":"Right", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Up", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Win", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"Left", "x":13, "y":4}, + {"label":"Down", "x":14, "y":4}, + {"label":"Right", "x":15, "y":4} + ] + }, + "LAYOUT_ansi_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"|", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"~", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Up", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Left", "x":13, "y":4}, + {"label":"Down", "x":14, "y":4}, + {"label":"Right", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"\"", "x":2, "y":0}, + {"label":"\u00a3", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"\u00ac", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"@", "x":11.75, "y":2}, + {"label":"~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Up", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"AltGr", "x":10, "y":4}, + {"label":"Win", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"Left", "x":13, "y":4}, + {"label":"Down", "x":14, "y":4}, + {"label":"Right", "x":15, "y":4} + ] + }, + "LAYOUT_iso_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"\"", "x":2, "y":0}, + {"label":"\u00a3", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"~", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"\u00ac", "x":15, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"@", "x":11.75, "y":2}, + {"label":"~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Up", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"AltGr", "x":11, "y":4, "w":1.5}, + {"label":"Left", "x":13, "y":4}, + {"label":"Down", "x":14, "y":4}, + {"label":"Right", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/evyd13/ta65/keymaps/default/keymap.c b/keyboards/evyd13/ta65/keymaps/default/keymap.c new file mode 100644 index 0000000000..8bb8a14ba0 --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + switch(get_highest_layer(layer_state)){ + case 1: //Layer 1 + if (!clockwise) { // Remove ! to reverse direction + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + break; + default: //Layer 0 + if (!clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } +} diff --git a/keyboards/evyd13/ta65/keymaps/default_ansi/keymap.c b/keyboards/evyd13/ta65/keymaps/default_ansi/keymap.c new file mode 100644 index 0000000000..9319d5bbac --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/default_ansi/keymap.c @@ -0,0 +1,17 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _MA 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_65_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT) +}; diff --git a/keyboards/evyd13/ta65/keymaps/default_ansi_tsangan/keymap.c b/keyboards/evyd13/ta65/keymaps/default_ansi_tsangan/keymap.c new file mode 100644 index 0000000000..5e0cd0b553 --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/default_ansi_tsangan/keymap.c @@ -0,0 +1,17 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _MA 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_ansi_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT) +}; diff --git a/keyboards/evyd13/ta65/keymaps/default_iso/keymap.c b/keyboards/evyd13/ta65/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..1d11ff9584 --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/default_iso/keymap.c @@ -0,0 +1,17 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _MA 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_65_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT) +}; diff --git a/keyboards/evyd13/ta65/keymaps/default_iso_tsangan/keymap.c b/keyboards/evyd13/ta65/keymaps/default_iso_tsangan/keymap.c new file mode 100644 index 0000000000..8505d73afd --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/default_iso_tsangan/keymap.c @@ -0,0 +1,17 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _MA 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_iso_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT) +}; diff --git a/keyboards/evyd13/ta65/keymaps/evyd13/config.h b/keyboards/evyd13/ta65/keymaps/evyd13/config.h new file mode 100644 index 0000000000..9b18f58269 --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/evyd13/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define RETRO_TAPPING diff --git a/keyboards/evyd13/ta65/keymaps/evyd13/keymap.c b/keyboards/evyd13/ta65/keymaps/evyd13/keymap.c new file mode 100644 index 0000000000..a8ce0f180e --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/evyd13/keymap.c @@ -0,0 +1,45 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum { + _MA, + _GA, + _FL, + _SP +}; + +#define SPACE LT(_SP, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT_65_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MPLY, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_CAPS, KC_LGUI, KC_LALT, SPACE, KC_RALT, KC_RCTRL,MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + +[_GA] = LAYOUT_65_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______), + +[_FL] = LAYOUT_65_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, KC_HOME, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[_SP] = LAYOUT_65_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/evyd13/ta65/keymaps/via/keymap.c b/keyboards/evyd13/ta65/keymaps/via/keymap.c new file mode 100644 index 0000000000..e2d96eb9c0 --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/via/keymap.c @@ -0,0 +1,33 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSLS, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTRL,MO(2), KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, KC_HOME, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +}; diff --git a/keyboards/evyd13/ta65/keymaps/via/rules.mk b/keyboards/evyd13/ta65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/evyd13/ta65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/evyd13/ta65/readme.md b/keyboards/evyd13/ta65/readme.md new file mode 100644 index 0000000000..ea98161bb3 --- /dev/null +++ b/keyboards/evyd13/ta65/readme.md @@ -0,0 +1,17 @@ +TA-65 +===== + +A 65% PCB designed to fit the TADA68, Kayak and others by [Evyd13](https://github.com/evyd13). + + + +Keyboard Maintainer: QMK Community<br> +Hardware Supported: TA-65 PCB<br> +Hardware Availability: [maartenwut.com](https://maartenwut.com/product/ta-65/)<br> + +Make example for this keyboard (after setting up your build environment): + + make ta65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk new file mode 100644 index 0000000000..9984f27679 --- /dev/null +++ b/keyboards/evyd13/ta65/rules.mk @@ -0,0 +1,34 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +ENCODER_ENABLE = yes + +LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/evyd13/ta65/ta65.c b/keyboards/evyd13/ta65/ta65.c new file mode 100644 index 0000000000..4f67a0203d --- /dev/null +++ b/keyboards/evyd13/ta65/ta65.c @@ -0,0 +1,13 @@ +#include "ta65.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; diff --git a/keyboards/evyd13/ta65/ta65.h b/keyboards/evyd13/ta65/ta65.h new file mode 100644 index 0000000000..40a763b993 --- /dev/null +++ b/keyboards/evyd13/ta65/ta65.h @@ -0,0 +1,82 @@ +#pragma once +#include "quantum.h" + +// readability +#define ___ KC_NO +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \ + {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \ +} + +#define LAYOUT_65_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \ + {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \ + {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \ +} + +#define LAYOUT_ansi_tsangan( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k4a, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, ___}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d, k2e, ___}, \ + {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \ + {k40, k41, k42, ___, ___, ___, k46, ___, ___, ___, k4a, ___, k4c, k4d, k4e, ___} \ +} + +#define LAYOUT_iso_tsangan( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0f, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k4a, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___, k1e, ___}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \ + {k40, k41, k42, ___, ___, ___, k46, ___, ___, ___, k4a, ___, k4c, k4d, k4e, ___} \ +} + +#define LAYOUT_65_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k46, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, ___}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, ___}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, ___}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, ___}, \ + {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, k4b, k4c, k4d, k4e, ___} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h new file mode 100644 index 0000000000..534ae71a51 --- /dev/null +++ b/keyboards/evyd13/wasdat/config.h @@ -0,0 +1,230 @@ +/* +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xC474 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Wasdat +#define DESCRIPTION Custom controller for the WASD v2 TKL and 104 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D6, D4, F6, F7, F4, F5, F0, F1 } +#define MATRIX_COL_PINS { } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// For QMK DFU +#define QMK_ESC_OUTPUT D6 +#define QMK_ESC_INPUT D7 +#define QMK_LED B0 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 5 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/evyd13/wasdat/info.json b/keyboards/evyd13/wasdat/info.json new file mode 100644 index 0000000000..83c413eda2 --- /dev/null +++ b/keyboards/evyd13/wasdat/info.json @@ -0,0 +1,459 @@ +{ + "keyboard_name": "Wasdat", + "url": "https://maartenwut.com/product/wasdat/", + "maintainer": "evyd13", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT_fullsize_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_fullsize_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"Page Up", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/evyd13/wasdat/keymaps/default/keymap.c b/keyboards/evyd13/wasdat/keymaps/default/keymap.c new file mode 100644 index 0000000000..89de85c497 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ) +}; diff --git a/keyboards/evyd13/wasdat/keymaps/default/readme.md b/keyboards/evyd13/wasdat/keymaps/default/readme.md new file mode 100644 index 0000000000..66cf593892 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default ANSI keymap for the Wasdat diff --git a/keyboards/evyd13/wasdat/keymaps/default_iso/keymap.c b/keyboards/evyd13/wasdat/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..fdc61cea4b --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/default_iso/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤ + * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │AlGr│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ) +}; diff --git a/keyboards/evyd13/wasdat/keymaps/default_iso/readme.md b/keyboards/evyd13/wasdat/keymaps/default_iso/readme.md new file mode 100644 index 0000000000..e36d764201 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/default_iso/readme.md @@ -0,0 +1 @@ +# The default ISO keymap for the Wasdat diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/config.h b/keyboards/evyd13/wasdat/keymaps/konstantin/config.h new file mode 100644 index 0000000000..1d12c7db37 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/config.h @@ -0,0 +1,6 @@ +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 + +#define LAYER_FN +#define LAYER_NUMPAD diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/keymap.c b/keyboards/evyd13/wasdat/keymaps/konstantin/keymap.c new file mode 100644 index 0000000000..481c5fd1fa --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/keymap.c @@ -0,0 +1,79 @@ +#include QMK_KEYBOARD_H +#include "konstantin.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base layer + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12││PSc│SLk│Pau│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace ││Ins│Hom│PgU│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ ││Del│End│PgD│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐Ent │└───┴───┴───┘ + * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ + * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ RShift │ │ ↑ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐ + * │LCtl│LGui│LAlt│ Space │RAlt│RGui│FnFL│RCtl││ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ + */ + [L_BASE] = LAYOUT_tkl_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, RAL_RGU, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Fn layer + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│Mut│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐ + * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││Ply│Stp│Vo+│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤ + * │ M4 │M2 │M↑ │M1 │M3 │M5 │ │UCM│ │ │ │ │ │ ││Prv│Nxt│Vo-│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │└───┴───┴───┘ + * │ │M← │M↓ │M→ │MW↑│ │ │ │ │ │ │ │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ + * │ │ │MA0│MA2│MW←│MW→│ │ │App│ │ │ │ │ │PgU│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐ + * │ │DtPR│DtNA│ MW↓ │ │ │ │ ││Hom│PgD│End│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ + */ + [L_FN] = LAYOUT_tkl_iso( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, KC_MUTE, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, KC_MPLY, KC_MSTP, KC_VOLU, + KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, + _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, _______, _______, _______, _______, KC_PGUP, + _______, DST_P_R, DST_N_A, KC_WH_D, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + /* Numpad layer + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ││ │Num│ │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐ + * │ │ │ │ │ │ │ │P7 │P8 │P9 │P- │ − │ = │ ││ │ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤ + * │ │ │ │ │ │ │ │P4 │P5 │P6 │P+ │ ( │ ) │ ││ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐PEnt│└───┴───┴───┘ + * │ │ │ │ │ │ │ │P1 │P2 │P3 │P* │ × │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ + * │ │ │ │ │ │ │ │P0 │P0 │ , │P. │P/ │ ÷ │ │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐ + * │ │ │ │ │ │ │ │ ││ │ │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ + */ + [L_NUMPAD] = LAYOUT_tkl_iso( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, MINUS, EQUALS, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, L_PAREN, R_PAREN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PAST, TIMES, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P0, COMMA, KC_PDOT, KC_PSLS, DIVIDE, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk new file mode 100644 index 0000000000..f70005d3f6 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk @@ -0,0 +1,17 @@ +# Generic features +BOOTMAGIC_ENABLE = lite +COMMAND_ENABLE = yes +CONSOLE_ENABLE = yes +EXTRAKEY_ENABLE = yes +MOUSEKEY_ENABLE = yes +NKRO_ENABLE = yes +TAP_DANCE_ENABLE = yes +UNICODEMAP_ENABLE = yes + +# Keyboard-specific features +VIA_ENABLE = yes + +# Firmware size reduction +GRAVE_ESC_ENABLE = no +MAGIC_ENABLE = no +SPACE_CADET_ENABLE = no diff --git a/keyboards/evyd13/wasdat/keymaps/via/keymap.c b/keyboards/evyd13/wasdat/keymaps/via/keymap.c new file mode 100644 index 0000000000..9ad78d60d9 --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/via/keymap.c @@ -0,0 +1,96 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │Shft│ < │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│FnMn│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_APP), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Rst│ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤ │ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/wasdat/keymaps/via/rules.mk b/keyboards/evyd13/wasdat/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/wasdat/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/wasdat/matrix.c b/keyboards/evyd13/wasdat/matrix.c new file mode 100644 index 0000000000..6dd79b5330 --- /dev/null +++ b/keyboards/evyd13/wasdat/matrix.c @@ -0,0 +1,344 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include "wait.h" +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +// matrix code + +#ifdef DIRECT_PINS + +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == COL2ROW) + +static void select_row(uint8_t row) { + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } + +static void unselect_rows(void) { + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin_state = readPin(col_pins[col_index]); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == ROW2COL) + +/* Cols 0 - 15 + * col 0: C7 + * col 1: B6 + * col 2: C6 + * col 3: B4 + * col 4: B5 + * col 5: D7 + * These columns use a 74HC237D 3 to 8 bit demultiplexer. + * A0 A1 A2 + * col / pin: PD2 PD1 PD0 + * 6: 1 1 1 + * 7: 0 1 1 + * 8: 1 0 1 + * 9: 0 0 1 + * 10: 1 1 0 + * 11: 0 1 0 + * 12: 1 0 0 + * col 13: D3 + * col 14: B7 + * col 15: B3 + */ +static void select_col(uint8_t col) { + switch (col) { + case 0: + writePinLow(C7); + break; + case 1: + writePinLow(B6); + break; + case 2: + writePinLow(C6); + break; + case 3: + writePinLow(B4); + break; + case 4: + writePinLow(B5); + break; + case 5: + writePinLow(D7); + break; + case 6: + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D2); + break; + case 7: + writePinHigh(D0); + writePinHigh(D1); + break; + case 8: + writePinHigh(D0); + writePinHigh(D2); + break; + case 9: + writePinHigh(D0); + break; + case 10: + writePinHigh(D1); + writePinHigh(D2); + break; + case 11: + writePinHigh(D1); + break; + case 12: + writePinHigh(D2); + break; + case 13: + writePinLow(D3); + break; + case 14: + writePinLow(B7); + break; + case 15: + writePinLow(B3); + break; + } +} + +static void unselect_col(uint8_t col) { + switch (col) { + case 0: + writePinHigh(C7); + break; + case 1: + writePinHigh(B6); + break; + case 2: + writePinHigh(C6); + break; + case 3: + writePinHigh(B4); + break; + case 4: + writePinHigh(B5); + break; + case 5: + writePinHigh(D7); + break; + case 6: + writePinLow(D0); + writePinLow(D1); + writePinLow(D2); + break; + case 7: + writePinLow(D0); + writePinLow(D1); + break; + case 8: + writePinLow(D0); + writePinLow(D2); + break; + case 9: + writePinLow(D0); + break; + case 10: + writePinLow(D1); + writePinLow(D2); + break; + case 11: + writePinLow(D1); + break; + case 12: + writePinLow(D2); + break; + case 13: + writePinHigh(D3); + break; + case 14: + writePinHigh(B7); + break; + case 15: + writePinHigh(B3); + break; + } +} + +static void unselect_cols(void) { + //Native + setPinOutput(D3); + setPinOutput(D7); + writePinHigh(D3); + writePinHigh(D7); + + setPinOutput(C6); + setPinOutput(C7); + writePinHigh(C6); + writePinHigh(C7); + + setPinOutput(B3); + setPinOutput(B4); + setPinOutput(B5); + setPinOutput(B6); + setPinOutput(B7); + writePinHigh(B3); + writePinHigh(B4); + writePinHigh(B5); + writePinHigh(B6); + writePinHigh(B7); + + //Demultiplexer + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D2); + writePinLow(D0); + writePinLow(D1); + writePinLow(D2); +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index]) == 0) { + // Pin LO, set col bit + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +#endif + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(current_matrix, current_row); + } +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } +#endif + + return changed; +} diff --git a/keyboards/evyd13/wasdat/readme.md b/keyboards/evyd13/wasdat/readme.md new file mode 100644 index 0000000000..40a06b5930 --- /dev/null +++ b/keyboards/evyd13/wasdat/readme.md @@ -0,0 +1,21 @@ +# Wasdat + + + +A drop-in replacement controller for the WASD v2 TKL and fullsize models. + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: WASD v2 TKL/Fullsize ANSI & ISO with Wasdat controller +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat/) + +## Flashing + +The WASD has no reset button, but it does have a bank of DIP switches on the bottom, so to enter the bootloader on this board, simply toggle the first one on and off. + +--- + +Make example for this keyboard (after setting up your build environment): + + make evyd13/wasdat:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk new file mode 100644 index 0000000000..575e63f5bc --- /dev/null +++ b/keyboards/evyd13/wasdat/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = lite +SRC += matrix.c + +LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/evyd13/wasdat/wasdat.c b/keyboards/evyd13/wasdat/wasdat.c new file mode 100644 index 0000000000..2d0e999c4e --- /dev/null +++ b/keyboards/evyd13/wasdat/wasdat.c @@ -0,0 +1,47 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wasdat.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(B0); + writePinHigh(B0); + setPinOutput(B1); + writePinHigh(B1); + setPinOutput(B2); + writePinHigh(B2); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(B0, !led_state.caps_lock); + writePin(B1, !led_state.scroll_lock); + writePin(B2, !led_state.num_lock); + } + + return true; +} diff --git a/keyboards/evyd13/wasdat/wasdat.h b/keyboards/evyd13/wasdat/wasdat.h new file mode 100644 index 0000000000..be0472f398 --- /dev/null +++ b/keyboards/evyd13/wasdat/wasdat.h @@ -0,0 +1,123 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \ + K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \ + K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, K59, K57, K56, K5C, \ + K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, K39, K37, K36, \ + K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \ + K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \ +) \ +{ \ + { K00, XXX, K02, K03, K04, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \ + { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \ + { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \ + { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \ + { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \ +} + +#define LAYOUT_fullsize_ansi( \ + K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \ + K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \ + K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, K59, K57, K56, K5C, \ + K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, K39, K37, K36, \ + K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \ + K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \ +) \ +{ \ + { K00, XXX, K02, K03, XXX, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \ + { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \ + { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \ + { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \ + { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \ +} + +#define LAYOUT_fullsize_iso( \ + K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \ + K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, K69, K67, K66, K76, \ + K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, K59, K57, K56, K5C, \ + K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, K39, K37, K36, \ + K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, K19, K17, K16, K1C, \ + K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77, K07, K06 \ +) \ +{ \ + { K00, XXX, K02, K03, K04, K05, K06, K07, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \ + { K10, K11, K12, XXX, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, K3F }, \ + { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, XXX, K5C, XXX, K5E, K5F }, \ + { K60, K61, K62, XXX, K64, K65, K66, K67, K68, K69, K6A, XXX, XXX, K6D, K6E, XXX }, \ + { K70, XXX, XXX, K73, XXX, XXX, K76, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \ +} + +#define LAYOUT_tkl_ansi( \ + K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \ + K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \ + K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K1D, K49, K2C, K26, \ + K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K6D, \ + K3B, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \ + K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \ +) \ +{ \ + { K00, XXX, K02, K03, XXX, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \ + { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \ + { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \ + { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \ + { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \ +} + +#define LAYOUT_tkl_iso( \ + K05, K44, K42, K32, K02, K21, K0A, K3E, K4E, K4D, K2D, K0D, K7D, K23, K53, K51, \ + K45, K25, K24, K22, K20, K40, K48, K28, K2A, K2E, K2F, K4F, K4A, K3D, K47, K4C, K46, \ + K35, K55, K54, K52, K50, K30, K38, K58, K5A, K5E, K5F, K3F, K3A, K49, K2C, K26, \ + K34, K15, K14, K12, K10, K00, K08, K18, K1A, K1E, K1F, K0F, K1D, K6D, \ + K3B, K04, K65, K64, K62, K60, K70, K78, K68, K6A, K6E, K7F, K1B, K0C, \ + K41, K31, K03, K09, K73, K11, K33, K61, K7C, K79, K77 \ +) \ +{ \ + { K00, XXX, K02, K03, K04, K05, XXX, XXX, K08, K09, K0A, XXX, K0C, K0D, XXX, K0F }, \ + { K10, K11, K12, XXX, K14, K15, XXX, XXX, K18, XXX, K1A, K1B, XXX, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, K28, XXX, K2A, XXX, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, XXX, XXX, K38, XXX, K3A, K3B, XXX, K3D, K3E, K3F }, \ + { K40, K41, K42, XXX, K44, K45, K46, K47, K48, K49, K4A, XXX, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX, K58, XXX, K5A, XXX, XXX, XXX, K5E, K5F }, \ + { K60, K61, K62, XXX, K64, K65, XXX, XXX, K68, XXX, K6A, XXX, XXX, K6D, K6E, XXX }, \ + { K70, XXX, XXX, K73, XXX, XXX, XXX, K77, K78, K79, XXX, XXX, K7C, K7D, XXX, K7F } \ +} diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h new file mode 100644 index 0000000000..f4b15ced3e --- /dev/null +++ b/keyboards/evyd13/wasdat_code/config.h @@ -0,0 +1,230 @@ +/* +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xB00E +#define DEVICE_VER 0x0001 +#define MANUFACTURER Evyd13 +#define PRODUCT Wasdat Code +#define DESCRIPTION Custom controller for the WASD CODE TKL and 104-key keyboards + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6, C7, C6, B6, B5, B4, D7, D6 } +#define MATRIX_COL_PINS { } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// For QMK DFU +#define QMK_ESC_OUTPUT E6 +#define QMK_ESC_INPUT F0 +#define QMK_LED B1 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 2 +#define BOOTMAGIC_LITE_COLUMN 3 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/evyd13/wasdat_code/info.json b/keyboards/evyd13/wasdat_code/info.json new file mode 100644 index 0000000000..4e6ed630ca --- /dev/null +++ b/keyboards/evyd13/wasdat_code/info.json @@ -0,0 +1,459 @@ +{ + "keyboard_name": "Wasdat Code", + "url": "https://maartenwut.com/product/wasdat-code/", + "maintainer": "evyd13", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT_fullsize_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_fullsize_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"Page Up", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/evyd13/wasdat_code/keymaps/default/keymap.c b/keyboards/evyd13/wasdat_code/keymaps/default/keymap.c new file mode 100644 index 0000000000..c73a2ececb --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + LAYOUT_fullsize_ansi( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/wasdat_code/keymaps/default/readme.md b/keyboards/evyd13/wasdat_code/keymaps/default/readme.md new file mode 100644 index 0000000000..66cf593892 --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default ANSI keymap for the Wasdat diff --git a/keyboards/evyd13/wasdat_code/keymaps/default_iso/keymap.c b/keyboards/evyd13/wasdat_code/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..fdc61cea4b --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/default_iso/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤ + * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │AlGr│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ) +}; diff --git a/keyboards/evyd13/wasdat_code/keymaps/default_iso/readme.md b/keyboards/evyd13/wasdat_code/keymaps/default_iso/readme.md new file mode 100644 index 0000000000..e36d764201 --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/default_iso/readme.md @@ -0,0 +1 @@ +# The default ISO keymap for the Wasdat diff --git a/keyboards/evyd13/wasdat_code/keymaps/via/keymap.c b/keyboards/evyd13/wasdat_code/keymaps/via/keymap.c new file mode 100644 index 0000000000..35445812bd --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/wasdat_code/keymaps/via/rules.mk b/keyboards/evyd13/wasdat_code/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/wasdat_code/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/wasdat_code/matrix.c b/keyboards/evyd13/wasdat_code/matrix.c new file mode 100644 index 0000000000..7844db7ab7 --- /dev/null +++ b/keyboards/evyd13/wasdat_code/matrix.c @@ -0,0 +1,369 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include "wait.h" +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +// matrix code + +#ifdef DIRECT_PINS + +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == COL2ROW) + +static void select_row(uint8_t row) { + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } + +static void unselect_rows(void) { + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin_state = readPin(col_pins[col_index]); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == ROW2COL) + +/* Cols 0 - 15 + * col 0: F7 + * col 1: F5 + * col 2: F6 + * col 3: F1 + * col 4: F4 + * col 5: F0 + * These columns use a 74HC237D 3 to 8 bit demultiplexer. D4 is the enable pin, must be set high to use it. + * A0 A1 A2 + * col / pin: PD2 PD1 PD0 + * 6: 1 1 1 + * col 7: D3 + * col 8: B7 + * 9: 0 1 1 + * 10: 1 0 1 + * 11: 0 0 1 + * 12: 1 1 0 + * 13: 0 1 0 + * 14: 1 0 0 + * 15: 0 0 0 + */ +static void select_col(uint8_t col) { + switch (col) { + case 0: + writePinLow(F7); + break; + case 1: + writePinLow(F5); + break; + case 2: + writePinLow(F6); + break; + case 3: + writePinLow(F1); + break; + case 4: + writePinLow(F4); + break; + case 5: + writePinLow(F0); + break; + case 6: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D1); + writePinHigh(D0); + break; + case 7: + writePinLow(D5); + break; + case 8: + writePinLow(D3); + break; + case 9: + writePinHigh(D4); + writePinHigh(D1); + writePinHigh(D0); + break; + case 10: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D0); + break; + case 11: + writePinHigh(D4); + writePinHigh(D0); + break; + case 12: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D1); + break; + case 13: + writePinHigh(D4); + writePinHigh(D1); + break; + case 14: + writePinHigh(D4); + writePinHigh(D2); + break; + case 15: + writePinHigh(D4); + break; + } +} + +static void unselect_col(uint8_t col) { + switch (col) { + case 0: + writePinHigh(F7); + break; + case 1: + writePinHigh(F5); + break; + case 2: + writePinHigh(F6); + break; + case 3: + writePinHigh(F1); + break; + case 4: + writePinHigh(F4); + break; + case 5: + writePinHigh(F0); + break; + case 6: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 7: + writePinHigh(D5); + break; + case 8: + writePinHigh(D3); + break; + case 9: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 10: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 11: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 12: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 13: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 14: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 15: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + } +} + +static void unselect_cols(void) { + //Native + writePinHigh(F7); + writePinHigh(F5); + writePinHigh(F6); + writePinHigh(F1); + writePinHigh(F4); + writePinHigh(F0); + writePinHigh(D3); + writePinHigh(D5); + + //Demultiplexer + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D2); + setPinOutput(D3); + setPinOutput(F7); + setPinOutput(F5); + setPinOutput(F6); + setPinOutput(F1); + setPinOutput(F4); + setPinOutput(F0); + setPinOutput(D3); + setPinOutput(D5); + setPinOutput(D4); +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index]) == 0) { + // Pin LO, set col bit + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +#endif + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(current_matrix, current_row); + } +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } +#endif + + return changed; +} diff --git a/keyboards/evyd13/wasdat_code/readme.md b/keyboards/evyd13/wasdat_code/readme.md new file mode 100644 index 0000000000..0467069fcc --- /dev/null +++ b/keyboards/evyd13/wasdat_code/readme.md @@ -0,0 +1,19 @@ +# Wasdat Code + +A drop-in replacement controller for the WASD CODE TKL and fullsize models. + +* Keyboard Maintainer: [Evyd13](https://github.com/evyd13) +* Hardware Supported: WASD CODE TKL/Fullsize ANSI & ISO with Wasdat Code controller +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat-code/) + +## Flashing + +The WASD has no reset button, so to put the controller in flashing mode, simply unplug the USB cable and plug it back in while holding the ESC key on the keyboard. + +--- + +Make example for this keyboard (after setting up your build environment): + + make evyd13/wasdat_code:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk new file mode 100644 index 0000000000..1ff76bab21 --- /dev/null +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +CUSTOM_MATRIX = lite +SRC += matrix.c + +LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/evyd13/wasdat_code/wasdat_code.c b/keyboards/evyd13/wasdat_code/wasdat_code.c new file mode 100644 index 0000000000..33551c2d0c --- /dev/null +++ b/keyboards/evyd13/wasdat_code/wasdat_code.c @@ -0,0 +1,47 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wasdat_code.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(B1); + setPinOutput(B2); + setPinOutput(B3); + writePinHigh(B1); + writePinHigh(B2); + writePinHigh(B3); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(B1, !led_state.caps_lock); + writePin(B2, !led_state.scroll_lock); + writePin(B3, !led_state.num_lock); + } + + return true; +} diff --git a/keyboards/evyd13/wasdat_code/wasdat_code.h b/keyboards/evyd13/wasdat_code/wasdat_code.h new file mode 100644 index 0000000000..b586f4aade --- /dev/null +++ b/keyboards/evyd13/wasdat_code/wasdat_code.h @@ -0,0 +1,107 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all LAYOUT_fullsize_iso + +#define LAYOUT_fullsize_ansi( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, k78, k77, k76, k56, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k1b, k68, k3e, k36, k48, k47, k46, k4e, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k7b, k28, k27, k26, \ + k29, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, k18, k17, k16, k1e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57, k07, k06 \ +) \ +{ \ + { k00, XXX, k02, k03, XXX, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX, k4a, XXX, k4c, k4d, k4e, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, k56, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, k76, k77, k78, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_fullsize_iso( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, k78, k77, k76, k56, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k68, k3e, k36, k48, k47, k46, k4e, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k1b, k7b, k28, k27, k26, \ + k29, k04, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, k18, k17, k16, k1e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57, k07, k06 \ +) \ +{ \ + { k00, XXX, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX, k4a, XXX, k4c, k4d, k4e, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, k56, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, k76, k77, k78, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_tkl_ansi( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k1b, k68, k3e, k36, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k7b, \ + k29, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57 \ +) \ +{ \ + { k00, XXX, k02, k03, XXX, k05, XXX, XXX, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, XXX, XXX, XXX, k19, k1a, k1b, k1c, k1d, XXX, k1f }, \ + { k20, k21, k22, k23, k24, k25, XXX, XXX, XXX, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, XXX, XXX, XXX, XXX, k4a, XXX, k4c, k4d, XXX, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, XXX, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, XXX, XXX, XXX, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_tkl_iso( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k68, k3e, k36, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k1b, k7b, \ + k29, k04, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57 \ +) \ +{ \ + { k00, XXX, k02, k03, k04, k05, XXX, XXX, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, XXX, XXX, XXX, k19, k1a, k1b, k1c, k1d, XXX, k1f }, \ + { k20, k21, k22, k23, k24, k25, XXX, XXX, XXX, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, XXX, XXX, XXX, XXX, k4a, XXX, k4c, k4d, XXX, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, XXX, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, XXX, XXX, XXX, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} diff --git a/keyboards/evyd13/wonderland/config.h b/keyboards/evyd13/wonderland/config.h new file mode 100644 index 0000000000..a75394b01a --- /dev/null +++ b/keyboards/evyd13/wonderland/config.h @@ -0,0 +1,55 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xA71C +#define DEVICE_VER 0x0003 +#define MANUFACTURER Evyd13 +#define PRODUCT Wonderland +#define DESCRIPTION "QMK Firmware for the Wonderland" + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B0,D1,D2,D3,D5} +#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,E6,C7,C6,B6,B5,B4,D7,D6,D4} +#define UNUSED_PINS + + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Backlight configuration + */ +#define RGB_DI_PIN B7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 + +#define QMK_ESC_OUTPUT F0 // usually COL +#define QMK_ESC_INPUT B0 // usually ROW +#define QMK_LED B1 diff --git a/keyboards/evyd13/wonderland/info.json b/keyboards/evyd13/wonderland/info.json new file mode 100644 index 0000000000..678b081428 --- /dev/null +++ b/keyboards/evyd13/wonderland/info.json @@ -0,0 +1,80 @@ +{ + "keyboard_name": "Wonderland", + "url": "", + "maintainer": "evyd13", + "width": 18.25, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 66, + "layout": [ + {"label":"k10", "x":0, "y":0}, + {"label":"k00", "x":1.25, "y":0}, + {"label":"k01", "x":2.25, "y":0}, + {"label":"k02", "x":3.25, "y":0}, + {"label":"k03", "x":4.25, "y":0}, + {"label":"k04", "x":5.25, "y":0}, + {"label":"k05", "x":6.25, "y":0}, + {"label":"k06", "x":7.25, "y":0}, + {"label":"k07", "x":10.25, "y":0}, + {"label":"k08", "x":11.25, "y":0}, + {"label":"k09", "x":12.25, "y":0}, + {"label":"k0a", "x":13.25, "y":0}, + {"label":"k0b", "x":14.25, "y":0}, + {"label":"k0c", "x":15.25, "y":0}, + {"label":"k0d", "x":16.25, "y":0}, + {"label":"k0e", "x":17.25, "y":0}, + {"label":"k20", "x":0, "y":1}, + {"label":"k11", "x":1.25, "y":1, "w":1.5}, + {"label":"k12", "x":2.75, "y":1}, + {"label":"k13", "x":3.75, "y":1}, + {"label":"k14", "x":4.75, "y":1}, + {"label":"k15", "x":5.75, "y":1}, + {"label":"k16", "x":6.75, "y":1}, + {"label":"k17", "x":9.75, "y":1}, + {"label":"k18", "x":10.75, "y":1}, + {"label":"k19", "x":11.75, "y":1}, + {"label":"k1a", "x":12.75, "y":1}, + {"label":"k1b", "x":13.75, "y":1}, + {"label":"k1c", "x":14.75, "y":1}, + {"label":"k1d", "x":15.75, "y":1}, + {"label":"k1e", "x":16.75, "y":1, "w":1.5}, + {"label":"k30", "x":0, "y":2}, + {"label":"k21", "x":1.25, "y":2, "w":1.75}, + {"label":"k22", "x":3, "y":2}, + {"label":"k23", "x":4, "y":2}, + {"label":"k24", "x":5, "y":2}, + {"label":"k25", "x":6, "y":2}, + {"label":"k26", "x":7, "y":2}, + {"label":"k27", "x":10, "y":2}, + {"label":"k28", "x":11, "y":2}, + {"label":"k29", "x":12, "y":2}, + {"label":"k2a", "x":13, "y":2}, + {"label":"k2b", "x":14, "y":2}, + {"label":"k2c", "x":15, "y":2}, + {"label":"k2e", "x":16, "y":2, "w":2.25}, + {"label":"k31", "x":1.25, "y":3, "w":2.25}, + {"label":"k32", "x":3.5, "y":3}, + {"label":"k33", "x":4.5, "y":3}, + {"label":"k34", "x":5.5, "y":3}, + {"label":"k35", "x":6.5, "y":3}, + {"label":"k36", "x":7.5, "y":3}, + {"label":"k37", "x":9.5, "y":3}, + {"label":"k38", "x":10.5, "y":3}, + {"label":"k39", "x":11.5, "y":3}, + {"label":"k3a", "x":12.5, "y":3}, + {"label":"k3b", "x":13.5, "y":3}, + {"label":"k3c", "x":14.5, "y":3}, + {"label":"k3d", "x":15.5, "y":3, "w":1.75}, + {"label":"k3e", "x":17.25, "y":3}, + {"label":"k41", "x":1.25, "y":4, "w":1.5}, + {"label":"k43", "x":4.25, "y":4, "w":1.5}, + {"label":"k45", "x":5.75, "y":4, "w":2}, + {"label":"k46", "x":7.75, "y":4, "w":1.25}, + {"label":"k48", "x":9.5, "y":4, "w":2.75}, + {"label":"k4a", "x":12.25, "y":4, "w":1.5}, + {"label":"k4e", "x":16.75, "y":4, "w":1.5} + ] + } + } +} diff --git a/keyboards/evyd13/wonderland/keymaps/brandonschlack/config.h b/keyboards/evyd13/wonderland/keymaps/brandonschlack/config.h new file mode 100644 index 0000000000..38383cffc2 --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/brandonschlack/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Brandon Schlack + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#define USE_LEDS_FOR_LAYERS +#define STOPLIGHT_LED diff --git a/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c new file mode 100755 index 0000000000..ca7bd773c5 --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/brandonschlack/keymap.c @@ -0,0 +1,170 @@ +/* Copyright 2019 Brandon Schlack + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "brandonschlack.h" + +// LEDs +#define TOP_LED B1 +#define MIDDLE_LED B2 +#define BOTTOM_LED B3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_BASE] = LAYOUT( \ + KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1, \ + KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT \ +), +[_FN1] = LAYOUT( \ + KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, \ + KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DELT, \ + KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, \ + _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, \ + _______, _______, _______, _______, _______, _______, _______ \ + +), +[_FN2] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______ \ + +), +[_ADJUST] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______ \ + +) +/* +[_BLANK] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______ \ + +) +*/ +}; + +#ifdef STOPLIGHT_LED +bool is_led_stoplight_active = false; +uint8_t led_stoplight_index = 0; +uint16_t led_stoplight_timer = 0; +void matrix_scan_led_stoplight(void); + +void led_stoplight_start(void) { + writePinHigh(TOP_LED); + writePinHigh(MIDDLE_LED); + writePinHigh(BOTTOM_LED); + + is_led_stoplight_active = true; + led_stoplight_timer = timer_read(); +}; + +void led_stoplight_set(pin_t pin) { + writePinLow(pin); +}; + +void led_stoplight_end(void) { + // Reset timer and status variables + led_stoplight_index = 0; + is_led_stoplight_active = false; + led_stoplight_timer = 0; + led_update_kb(host_keyboard_led_state()); +}; + +void matrix_scan_led_stoplight(void) { + if (is_led_stoplight_active) { + if (timer_elapsed(led_stoplight_timer) > (1000 * (led_stoplight_index + 1))) { + switch (led_stoplight_index){ + case 0: + led_stoplight_set(TOP_LED); + led_stoplight_index++; + break; + case 1: + led_stoplight_set(MIDDLE_LED); + led_stoplight_index++; + break; + case 2: + led_stoplight_set(BOTTOM_LED); + led_stoplight_index++; + break; + default: + led_stoplight_index = 0; + is_led_stoplight_active = false; + led_stoplight_timer = 0; + led_update_kb(host_keyboard_led_state()); + break; + } + } + } +}; +#endif + +void keyboard_post_init_keymap(void) { +#ifdef STOPLIGHT_LED + led_stoplight_start(); +#endif +}; + +void matrix_scan_keymap(void) { +#ifdef STOPLIGHT_LED + matrix_scan_led_stoplight(); +#endif +}; + +#ifdef USE_LEDS_FOR_LAYERS +// example of how to use LEDs as layer indicators +static uint8_t top = 0; +static uint8_t middle = 0; + +layer_state_t layer_state_set_keymap(layer_state_t state) { + top = middle = 0; + state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); + + switch (get_highest_layer(state)) { + case _FN1: + top = 1; + break; + case _FN2: + middle = 1; + break; + case _ADJUST: + top = 1; + middle = 1; + break; + default: // for any other layers, or the default layer + break; + } + return state; +} + +// override kb level function +bool led_update_user(led_t usb_led) { + if (!is_led_stoplight_active) { + writePin(TOP_LED, !top); + writePin(MIDDLE_LED, !middle); + writePin(BOTTOM_LED, !usb_led.caps_lock); // still use bottom for Caps Lock + }; + return false; // we are using LEDs for something else override kb +} +#endif diff --git a/keyboards/evyd13/wonderland/keymaps/brandonschlack/rules.mk b/keyboards/evyd13/wonderland/keymaps/brandonschlack/rules.mk new file mode 100755 index 0000000000..80361c34fd --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/brandonschlack/rules.mk @@ -0,0 +1,8 @@ +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +VELOCIKEY_ENABLE = no + diff --git a/keyboards/evyd13/wonderland/keymaps/default/keymap.c b/keyboards/evyd13/wonderland/keymaps/default/keymap.c new file mode 100644 index 0000000000..da03d7615e --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/default/keymap.c @@ -0,0 +1,54 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BASE, + _FUNC +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_BASE] = LAYOUT( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \ + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ + KC_LCTL, KC_LAPO, KC_BSPC, KC_LGUI, KC_SPC, KC_RAPC, KC_RCTRL \ + ), +[_FUNC] = LAYOUT( + RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, \ + RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ +RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \ + KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, \ + _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \ + ) +}; + +#ifdef USE_LEDS_FOR_LAYERS +// example of how to use LEDs as layer indicators +static uint8_t top = 1; +static uint8_t middle = 0; +static uint8_t bottom = 0; + +layer_state_t layer_state_set_user(layer_state_t state) { + top = middle = bottom = 0; + switch (get_highest_layer(state)) { + case _BASE: + top = 1; + break; + case _FUNC: + middle = 1; + break; + default: // for any other layers, or the default layer + break; + } + return state; +} + +// override kb level function +bool led_update_user(led_t usb_led) { + writePin(B1, !top); + writePin(B2, !middle); + writePin(B3, !bottom); + return false; // we are using LEDs for something else override kb +} +#endif diff --git a/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c new file mode 100644 index 0000000000..ceb9856061 --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/keebs/keymap.c @@ -0,0 +1,23 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BASE, + _FUNC +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_BASE] = LAYOUT( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \ + KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_F11, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \ + KC_LCTL, KC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, KC_RAPC, KC_RCTRL \ + ), +[_FUNC] = LAYOUT( + RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, \ + RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ +RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \ + KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, \ + _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \ + ) +}; diff --git a/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/keymap.c b/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/keymap.c new file mode 100644 index 0000000000..5c59d53a7d --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/keymap.c @@ -0,0 +1,42 @@ +#include QMK_KEYBOARD_H + +#define CAPSTL CTL_T(KC_CAPS) + +enum layers { + _BASE, + _GAME, + _FUNC, + _RGB +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_BASE] = LAYOUT( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, + KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_END, CAPSTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_DEL, MO(2), + TG(1), KC_LAPO, KC_BSPC, KC_LGUI, KC_SPC, KC_RAPC, MO(3) + ), +[_GAME] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_SPC, _______, _______, _______, _______ + ), +[_FUNC] = LAYOUT( + KC_PSCR, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, KC_VOLU, KC_VOLD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, + KC_LSFT, KC_BRIU, KC_BRID, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, + KC_MPLY, KC_LALT, _______, _______, _______, KC_RALT, XXXXXXX + ), +[_RGB] = LAYOUT( + RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, + RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, +RGB_RMOD, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, + KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, + _______, KC_LALT, _______, _______, _______, KC_RALT, XXXXXXX + ) +}; diff --git a/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/readme.md b/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/readme.md new file mode 100644 index 0000000000..a5381fff32 --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/rafael-azevedo/readme.md @@ -0,0 +1,9 @@ +## Rafael-Azevedo a layout for everyday use and gaming + +### This layout was designed for everyday work with all necessary keys reachable from the home row, while having a toggle layer moving the space and backspace to a more traditional location. + +* The main layer gives you access to home, end, pgup and pgdn. While keeping control, delete, backspace, and enter reachable when your fingers are in the home row. +* The main layer also includes capslock key while tapped and it becomes control when pressed. +* **Toggle(1)[Game]:** Toggles into a gaming layout that gives you space on your left hand thumb and moves the backspace to the traditional location. That way you can game one handed while using a mouse. +* **MO(2)[_FUNC]:** Is a momentary layer for all special functions including F keys , volume control, and print screen. It also keys character C and V, allowing you to copy and paste while using arrow keys. This is an easy to reach location for all special funtionality that is not normally used. +* **M(3)[_RGB]:** Is a momentary layer that gives you all the RGB control and keyboard Reset. This moves the funtionality not normally used to a place you won't accidently hit and get annoyed at. diff --git a/keyboards/evyd13/wonderland/keymaps/rys/keymap.c b/keyboards/evyd13/wonderland/keymaps/rys/keymap.c new file mode 100644 index 0000000000..7669df535e --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/rys/keymap.c @@ -0,0 +1,23 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BASE, + _FUNC +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_BASE] = LAYOUT( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_NUBS, KC_LALT, KC_SPC, KC_NUHS, KC_RCTRL + ), +[_FUNC] = LAYOUT( + RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, + RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, +RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, + RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, + _______, KC_LALT, _______, _______, _______, KC_RALT, _______ + ) +}; diff --git a/keyboards/evyd13/wonderland/keymaps/via/keymap.c b/keyboards/evyd13/wonderland/keymaps/via/keymap.c new file mode 100644 index 0000000000..85fde41a25 --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/via/keymap.c @@ -0,0 +1,33 @@ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LAPO, KC_BSPC, KC_LGUI, KC_SPC, KC_RAPC, KC_RCTL + ), + [1] = LAYOUT( + RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, RESET, + RGB_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, + _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, _______, + _______, KC_LALT, _______, _______, _______, KC_RALT, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/evyd13/wonderland/keymaps/via/rules.mk b/keyboards/evyd13/wonderland/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/wonderland/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/evyd13/wonderland/readme.md b/keyboards/evyd13/wonderland/readme.md new file mode 100644 index 0000000000..8520908db3 --- /dev/null +++ b/keyboards/evyd13/wonderland/readme.md @@ -0,0 +1,14 @@ +Wonderland USB-c and USB-mini +====== + +Only the USB-mini part is compatible with the original Alice case. The USB-c version was created for the Lubrigante, a case designed by Zambumon and a GB run by homerowco. + +Keyboard Maintainer: [Evyd13](https://github.com/evyd13)<br> +Hardware Supported: Wonderland-C and Wonderland-Mini<br> +Hardware Availability: https://maartenwut.com/product/wonderland-mini-usb-only/<br> + +Make example for this keyboard (after setting up your build environment): + + make evyd13/wonderland:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/evyd13/wonderland/rules.mk b/keyboards/evyd13/wonderland/rules.mk new file mode 100644 index 0000000000..3a7e92f4db --- /dev/null +++ b/keyboards/evyd13/wonderland/rules.mk @@ -0,0 +1,31 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUTO_SHIFT_ENABLE = no +VELOCIKEY_ENABLE = yes + diff --git a/keyboards/evyd13/wonderland/wonderland.c b/keyboards/evyd13/wonderland/wonderland.c new file mode 100644 index 0000000000..4415443816 --- /dev/null +++ b/keyboards/evyd13/wonderland/wonderland.c @@ -0,0 +1,34 @@ +#include "wonderland.h" + +__attribute__ ((weak)) +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +__attribute__ ((weak)) +void led_init_ports(void) { + // * Set our LED pins as output + setPinOutput(B1); + setPinOutput(B2); + setPinOutput(B3); +} + +bool led_update_kb(led_t led_state) { + bool runDefault = led_update_user(led_state); + if (runDefault) { + writePin(B1, !led_state.num_lock); + writePin(B2, !led_state.caps_lock); + writePin(B3, !led_state.scroll_lock); + } + return runDefault; +} diff --git a/keyboards/evyd13/wonderland/wonderland.h b/keyboards/evyd13/wonderland/wonderland.h new file mode 100644 index 0000000000..075e3f64b4 --- /dev/null +++ b/keyboards/evyd13/wonderland/wonderland.h @@ -0,0 +1,22 @@ +#pragma once +#include "quantum.h" + +// readability +#define XXX KC_NO +#define LAYOUT( \ + k10, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k20, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k30, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k41, k43, k45, k46, k48, k4a, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \ + {XXX, k41, XXX, k43, XXX, k45, k46, XXX, k48, XXX, k4a, XXX, XXX, XXX, k4e} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); |