Merge branch 'master' of https://github.com/qmk/qmk_firmware

28 files changed, 0 insertions, 1426 deletions

diff --git a/keyboards/gherkin/README.md b/keyboards/gherkin/README.md
deleted file mode 100644
index 5e0daeabf9..0000000000
--- a/keyboards/gherkin/README.md
+++ /dev/null
@@ -1,18 +0,0 @@
-Gherkin
-===
-
-A 30 key keyboard.
-
-* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin)
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: Gherkin PCB  
-Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make gherkin:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-First pass at adding support for the gherkin keyboard. Compiles but completely
-untested. Intended to kick-start development.
diff --git a/keyboards/gherkin/config.h b/keyboards/gherkin/config.h
deleted file mode 100644
index 4607962d7c..0000000000
--- a/keyboards/gherkin/config.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    40 Percent Club
-#define PRODUCT         Gherkin
-#define DESCRIPTION     A 30 key ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 6
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B5
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 0
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif
\ No newline at end of file
diff --git a/keyboards/gherkin/gherkin.c b/keyboards/gherkin/gherkin.c
deleted file mode 100644
index 2952d842cf..0000000000
--- a/keyboards/gherkin/gherkin.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "gherkin.h"
diff --git a/keyboards/gherkin/gherkin.h b/keyboards/gherkin/gherkin.h
deleted file mode 100644
index f8674be40e..0000000000
--- a/keyboards/gherkin/gherkin.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef GHERKIN_H
-#define GHERKIN_H
-
-#include "quantum.h"
-
-#define LAYOUT_ortho_3x10( \
-	 K00,   K01,   K02,   K03,   K04,   K05,   K10,   K11,   K12,   K13 , \
-	 K14,   K15,   K20,   K21,   K22,   K23,   K24,   K25,   K30,   K31 , \
-	 K32,   K33,   K34,   K35,   K40,   K41,   K42,   K43,   K44,   K45   \
-) { \
-	{ K00,   K01,   K02,   K03,   K04,   K05 }, \
-	{ K10,   K11,   K12,   K13,   K14,   K15 }, \
-	{ K20,   K21,   K22,   K23,   K24,   K25 }, \
-	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
-	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
-}
-
-#endif
diff --git a/keyboards/gherkin/info.json b/keyboards/gherkin/info.json
deleted file mode 100644
index 7ebbfb04be..0000000000
--- a/keyboards/gherkin/info.json
+++ /dev/null
@@ -1,13 +0,0 @@
-{
-  "keyboard_name": "Gherkin",
-  "url": "",
-  "maintainer": "qmk",
-  "width": 10,
-  "height": 3,
-  "layouts": {
-    "LAYOUT_ortho_3x10": {
-      "key_count": 30,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}]
-    }
-  }
-}
diff --git a/keyboards/gherkin/keymaps/bbaserdem/README.md b/keyboards/gherkin/keymaps/bbaserdem/README.md
deleted file mode 100644
index 3c9a5e98b3..0000000000
--- a/keyboards/gherkin/keymaps/bbaserdem/README.md
+++ /dev/null
@@ -1,11 +0,0 @@
-# Gherkin Layout
-This is my gherkin layout.
-It is used as a game pad, and key layout is inspired by spare keys I had lying around.
-The firmware is very simple, and only includes one layer keymap, and RGB effects.
-
-# Flashing
-The following command should be used from the main qmk directory.
-```
-make gherkin:bbaserdem
-sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex
-```
diff --git a/keyboards/gherkin/keymaps/bbaserdem/config.h b/keyboards/gherkin/keymaps/bbaserdem/config.h
deleted file mode 100644
index 37d7113e78..0000000000
--- a/keyboards/gherkin/keymaps/bbaserdem/config.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef CONFIG_KEYMAP_H
-#define CONFIG_KEYMAP_H
-
-#include "../../config.h"
-#define RGB_DI_PIN F6
-#define RGBLED_NUM 10
-#define RGBLIGHT_ANIMATIONS
-#ifdef BACKLIGHT_LEVELS
-#undef BACKLIGHT_LEVELS
-#endif
-#define BACKLIGHT_LEVELS 3
-
-#endif
diff --git a/keyboards/gherkin/keymaps/bbaserdem/keymap.c b/keyboards/gherkin/keymaps/bbaserdem/keymap.c
deleted file mode 100644
index 0d3c8557c5..0000000000
--- a/keyboards/gherkin/keymaps/bbaserdem/keymap.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// This is a game-pad gherkin layout with RGB and LED lights
-
-#include QMK_KEYBOARD_H
-
-backlight_config_t backlight_config;
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Game pad
- * ,-----------------------------------------------------------.
- * | Esc |  1  |  2  |  3  |  4  |  5  |  6  | Ctl | Alt |  ~  |
- * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
- * | Tab |  Q  |  W  |  E  |  R  |  T  | |^| |  ;  |  '  |  /  |
- * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
- * | Shf |  A  |  S  |  D  |  F  | <-- | |v| | --> |  ,  |  .  |
- * `-----------------------------------------------------------'
- */
-    LAYOUT_ortho_3x10(
-        KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5,    KC_6,    KC_LCTRL, KC_LALT,  KC_GRAVE,
-        KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T,    KC_UP,   KC_SCLN,  KC_QUOTE, KC_SLASH,
-        KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT
-    )
-};
-
-void matrix_init_user(void) {
-    // Set LED's to max
-    _delay_us(300);
-    backlight_config.level = 2;
-    backlight_config.enable = 1;
-    eeconfig_update_backlight(backlight_config.raw);
-    backlight_set(backlight_config.level);
-    // Set RGB to rainbow mood light
-    rgblight_enable();
-    rgblight_mode(1);
-    rgblight_sethsv(120,255,255);
-    rgblight_mode(6);
-}
diff --git a/keyboards/gherkin/keymaps/bbaserdem/rules.mk b/keyboards/gherkin/keymaps/bbaserdem/rules.mk
deleted file mode 100644
index cd1cddebf4..0000000000
--- a/keyboards/gherkin/keymaps/bbaserdem/rules.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
-USER_NAME := bbaserdem-nouserspace
-
-STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER
-MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
-CONSOLE_ENABLE = no    # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-AUDIO_ENABLE = no 	   # Enable audio output from keyboard
-
-NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes  # Enable RBG light strips
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
diff --git a/keyboards/gherkin/keymaps/default/keymap.c b/keyboards/gherkin/keymaps/default/keymap.c
deleted file mode 100644
index f018200304..0000000000
--- a/keyboards/gherkin/keymaps/default/keymap.c
+++ /dev/null
@@ -1,74 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _______ KC_TRNS
-#define FN1_Q LT(1, KC_Q)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [0] = LAYOUT_ortho_3x10(
-    FN1_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
-    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ESC,
-    KC_Z,    KC_X,    KC_C,    KC_V,    KC_BSPC, KC_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
-  ),
-
-  [1] = LAYOUT_ortho_3x10(
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC,
-    _______, _______, _______, _______, _______, _______, RESET,   _______, _______, BL_DEC
-  ),
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-    DDRD |= (1 << 5); PORTD &= ~(1 << 5);
-  } else {
-    DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    DDRB |= (1 << 0); PORTB &= ~(1 << 0);
-  } else {
-    DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
diff --git a/keyboards/gherkin/keymaps/itsaferbie/config.h b/keyboards/gherkin/keymaps/itsaferbie/config.h
deleted file mode 100644
index 71c0cb8b56..0000000000
--- a/keyboards/gherkin/keymaps/itsaferbie/config.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#undef RGB_DI_PIN
-#undef RGBLED_NUM
-#define RGB_DI_PIN D2
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-#endif
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/itsaferbie/keymap.c b/keyboards/gherkin/keymaps/itsaferbie/keymap.c
deleted file mode 100644
index 580b041c9c..0000000000
--- a/keyboards/gherkin/keymaps/itsaferbie/keymap.c
+++ /dev/null
@@ -1,152 +0,0 @@
-#include QMK_KEYBOARD_H
-
-extern rgblight_config_t rgblight_config;
-extern keymap_config_t keymap_config;
-
-#define _PS 0 // This is the Photoshop Layer
-#define _AI 1 // This is the Illustrator Layer
-#define _PR 2 // This is the Premier Layer
-#define _XD 3 // This is the Experience Design Layer
-
-enum custom_keycodes {
-  PS = SAFE_RANGE,
-  AI,
-  PR,
-};
-
-#define _______ KC_TRNS
-
-#define PS TO(0)
-#define AI TO(1)
-#define PR TO(2)
-#define XD TO(3)
-
-// Mix of Photoshop, Illustrator, Premiere, and Experience Design shortcuts.
-#define SAVE  LCTL(KC_S)
-#define OPEN  LCTL(KC_O)
-#define COPY  LCTL(KC_C)
-#define PAST  LCTL(KC_V)
-#define CUNDO LCTL(LALT(KC_Z))
-#define INVERT LCTL(LSFT(KC_I))
-#define NLAYER LSFT(LCTL(KC_N))
-#define UNDO LCTL(KC_Z)
-#define TRANS LCTL(KC_T)
-#define ALIGNL LCTL(LSFT(KC_L))
-#define ALIGNC LCTL(LSFT(KC_C))
-#define ALIGNR LCTL(LSFT(KC_R))
-#define BRINGF LCTL(KC_RBRC)
-#define BRINGB LCTL(KC_LBRC)
-
-// Illustrator layer shortcuts.
-#define SHAPE LSFT(KC_M)
-#define RULER LCTL(LALT(KC_R))
-
-// Premiere layer shortcuts.
-#define REDO LCTL(LSFT(KC_Z))
-#define EXPORT LCTL(KC_M)
-#define IMPORT LCTL(KC_I)
-#define PCOPY LCTL(KC_V)
-#define PPASTE LCTL(LSFT(KC_V))
-
-// Experience Design layer shortcuts. (can be used with others too.)
-#define NEW LCTL(KC_N)
-#define LOCK LCTL(KC_L)
-#define SYMB LCTL(KC_K)
-#define HIDE LCTL(KC_SCLN)
-#define REPEAT LCTL(KC_R)
-#define MASK LCTL(LSFT(KC_M))
-#define GROUP LCTL(KC_G)
-#define UNGRP LCTL(LSFT(KC_G))
-#define VIEW LCTL(KC_TAB)
-#define HORZ LSFT(KC_C)
-#define VERT LSFT(KC_M)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  // Photoshop layer
-  [_PS] = LAYOUT_ortho_3x10(
-    SAVE,    KC_W, KC_E, KC_T,  KC_U,   KC_I,   KC_P,   INVERT,  CUNDO,   NLAYER,
-    UNDO,    KC_H, KC_L, TRANS, ALIGNL, ALIGNC, ALIGNR, BRINGB,  BRINGF,  OPEN,
-    KC_LSFT, COPY, PAST, KC_Z,  KC_C,   KC_V,   KC_B,   KC_LBRC, KC_RBRC, AI
-  ),
-
-  // Illustrator layer
-  [_AI] = LAYOUT_ortho_3x10(
-    _______, M(0),    RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
-    _______, _______, _______, KC_E,    _______, _______, _______, SHAPE, KC_O,    OPEN,
-    _______, _______, _______, _______, _______, _______, _______, KC_M,  KC_SLSH, PR
-  ),
-
-  // Premiere layer
-  [_PR] = LAYOUT_ortho_3x10(
-    _______, KC_Q,  KC_W,   KC_I,   KC_O, KC_P, IMPORT, EXPORT,  KC_MINS,  KC_EQL,
-    _______, REDO,  KC_D,   KC_F,   KC_H, KC_M, KC_ENT, KC_LBRC, KC_RBRC,  OPEN,
-    _______, PCOPY, PPASTE, KC_SPC, KC_Z, KC_C, KC_V,   KC_LEFT, KC_RIGHT, XD
-  ),
-
-  // Experience Design layer
-  [_XD] = LAYOUT_ortho_3x10(
-    _______, KC_E,    KC_R,  KC_T,  KC_P, KC_A, KC_L, KC_V, KC_DEL, NEW,
-    _______, REDO,    GROUP, UNGRP, VIEW, HORZ, VERT, KC_Z, KC_ENT, OPEN,
-    _______, KC_LCTL, COPY,  PAST,  SYMB, LOCK, MASK, HIDE, REPEAT, PS
-  ),
-
-};
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-void matrix_init_user(void) {
-  rgblight_enable();
-}
-
-void matrix_scan_user(void) {
-  #ifdef RGBLIGHT_ENABLE
-
-  static uint8_t old_layer = 255;
-  uint8_t new_layer = biton32(layer_state);
-
-  // Color of the Icons.
-  if (old_layer != new_layer) {
-    switch (new_layer) {
-      case _PS:
-        // #31C5F0
-        rgblight_setrgb(49, 197, 240);
-      break;
-      case _AI:
-        // #FF8011
-        rgblight_setrgb(255, 128, 17);
-      break;
-      case _PR:
-        // #E788FF
-        rgblight_setrgb(231, 136, 255);
-      break;
-      case _XD:
-        // #FF2BC2
-        rgblight_setrgb(255, 43, 194);
-      break;
-    }
-    old_layer = new_layer;
-  }
-  #endif
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-    case 0:
-      // Save for Web Macro.
-      return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END);
-  }
-  return MACRO_NONE;
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  }
-  return true;
-}
diff --git a/keyboards/gherkin/keymaps/itsaferbie/rules.mk b/keyboards/gherkin/keymaps/itsaferbie/rules.mk
deleted file mode 100644
index ed0af7b8bd..0000000000
--- a/keyboards/gherkin/keymaps/itsaferbie/rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-BACKLIGHT_ENABLE = yes
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h
deleted file mode 100644
index bb59ec213d..0000000000
--- a/keyboards/gherkin/keymaps/mjt/config.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    Some Guy
-#define PRODUCT         Gherkin
-#define DESCRIPTION     30 percent disaster
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// These are with USB on the left.
-// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-// original from TMK:  #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
-// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 }
-
-// these are with USB on the right.
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
-
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_PIN B5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define AUDIO_VOICES
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/gherkin/keymaps/mjt/keymap.c b/keyboards/gherkin/keymaps/mjt/keymap.c
deleted file mode 100644
index 2b4369c34f..0000000000
--- a/keyboards/gherkin/keymaps/mjt/keymap.c
+++ /dev/null
@@ -1,279 +0,0 @@
-#include QMK_KEYBOARD_H
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-//Tap Dance Declarations
-enum {
-  TD_Z_LCTL = 0,
-  TD_X_LGUI = 1,
-  TD_C_LALT = 2,
-  TD_A_TAB = 3,
-  TD_Q_ESC = 4,
-//   M(0)
-};
-
-//Friendly Layer Names
-enum gherkin_layers {
-  _QWERTY,
-  _SONGS,
-  _NUMBERS,
-  _SYMBOLS,
-  _PLOVER,
-  _ADJUST
-};
-
-// custom keycodes
-enum gherkin_keycodes {
-  QWERTY = SAFE_RANGE,
-  NUMBERS,
-  SYMBOLS,
-  SONGS,
-  PLOVER,
-  BACKLIT,
-  MACSLEEP,
-  EXT_PLV
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_ortho_3x10(
-    TD(TD_Q_ESC),   KC_W,               KC_E,           KC_R,  KC_T,               KC_Y,   KC_U,  KC_I,     KC_O,    KC_P,
-    TD(TD_A_TAB),   LT(_SYMBOLS,KC_S),  KC_D,           KC_F,  KC_G,               KC_H,   KC_J,  KC_K,     KC_L,    LT(_ADJUST,KC_SPC),
-    TD(TD_Z_LCTL),  TD(TD_X_LGUI),      TD(TD_C_LALT),  KC_V,  KC_B,  LT(_NUMBERS, KC_N),  KC_M,  KC_COMM,  KC_DOT,  SFT_T(KC_ENT)
-  ),
-  [_NUMBERS] = LAYOUT_ortho_3x10(
-    KC_1,   KC_2,   KC_3,   KC_4,    KC_5,                KC_6,     KC_7,     KC_8,     KC_9,     KC_0,
-    KC_F1,  KC_F2,  KC_F3,  KC_F4,   KC_F5,               KC_F6,    KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END ,
-    KC_F7,  KC_F8,  KC_F9,  KC_F10,  LT(_ADJUST,KC_F11),  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RIGHT
-  ),
-  [_SYMBOLS] = LAYOUT_ortho_3x10(
-    KC_EXLM,  KC_AT,        KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,     KC_RPRN,
-    KC_GRV,   _______,      XXXXXXX,  KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_MINS,  KC_EQL ,  KC_SCLN,     KC_QUOT,
-    KC_TILD,  MO(_ADJUST),  XXXXXXX,  KC_LCBR,  KC_RCBR,  KC_PIPE,  KC_UNDS,  KC_PLUS,  S(KC_SCLN),  S(KC_QUOT)
-  ),
-  [_PLOVER] = LAYOUT_ortho_3x10(
-    KC_Q,     KC_W,     KC_E,  KC_R,  KC_1,     KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,
-    KC_A,     KC_S,     KC_D,  KC_F,  KC_G,     KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,
-    EXT_PLV,  XXXXXXX,  KC_C,  KC_V,  XXXXXXX,  KC_N,  KC_M,  XXXXXXX,  XXXXXXX,  XXXXXXX
-  ),
-  [_ADJUST] = LAYOUT_ortho_3x10(
-    RESET,    _______,  _______,  _______,  _______,  QWERTY,   NUMBERS,  SYMBOLS,  PLOVER,    SONGS,
-    MUV_DE,   MUV_IN,   MU_ON,    MU_OFF,   _______,  _______,  _______,  _______,  MACSLEEP,  _______,
-    BACKLIT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______
-  )
-};
-
-#ifdef AUDIO_ENABLE
-
-float tone_startup[][2]    = SONG(STARTUP_SOUND);
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float tone_plover[][2]     = SONG(PLOVER_SOUND);
-float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
-float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
-
-float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case NUMBERS:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_dvorak);
-        #endif
-        persistant_default_layer_set(1UL<<_NUMBERS);
-      }
-      return false;
-      break;
-    case SYMBOLS:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_colemak);
-        #endif
-        persistant_default_layer_set(1UL<<_SYMBOLS);
-      }
-      return false;
-      break;
-    case PLOVER:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          stop_all_notes();
-          PLAY_SONG(tone_plover);
-        #endif
-        layer_off(_NUMBERS);
-        layer_off(_SYMBOLS);
-        layer_off(_ADJUST);
-        layer_on(_PLOVER);
-        if (!eeconfig_is_enabled()) {
-            eeconfig_init();
-        }
-        keymap_config.raw = eeconfig_read_keymap();
-        keymap_config.nkro = 1;
-        eeconfig_update_keymap(keymap_config.raw);
-      }
-      return false;
-      break;
-    case EXT_PLV:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_plover_gb);
-        #endif
-        layer_off(_PLOVER);
-      }
-      return false;
-      break;
-    case MACSLEEP:
-      if (record->event.pressed) {
-          // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
-          register_code(KC_RSFT);
-          register_code(KC_RCTL);
-          register_code(KC_POWER);
-          unregister_code(KC_POWER);
-          unregister_code(KC_RCTL);
-          unregister_code(KC_RSFT);
-      }
-      return false;
-      break;
-    case BACKLIT:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-        #ifdef BACKLIGHT_ENABLE
-          backlight_step();
-        #endif
-      } else {
-        unregister_code(KC_RSFT);
-      }
-      return false;
-      break;
-    }
-    return true;
-}
-
-
-/*
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-
-  switch (id) {
-        case 0: {
-            if (record->event.pressed) {
-                key_timer = timer_read(); // if the key is being pressed, we start the timer.
-            }
-            else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
-                if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
-                    return MACRO( D(LSFT), END  );
-                }
-                else {
-                    return MACRO( T(N), END  );
-                }
-            }
-            break;
-        }
-      }
-  return MACRO_NONE;
-}*/
-
-void matrix_init_user(void) {
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-#ifdef AUDIO_ENABLE
-
-void startup_user()
-{
-    _delay_ms(20); // gets rid of tick
-    PLAY_SONG(tone_startup);
-}
-
-void shutdown_user()
-{
-    PLAY_SONG(tone_goodbye);
-    _delay_ms(150);
-    stop_all_notes();
-}
-
-void music_on_user(void)
-{
-    music_scale_user();
-}
-
-void music_scale_user(void)
-{
-    PLAY_SONG(music_scale);
-}
-
-#endif
-
-void matrix_scan_user(void) {
-}
-
-//Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for Esc, twice for Caps Lock
-  [TD_Z_LCTL]  = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL),
-  [TD_X_LGUI]  = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI),
-  [TD_C_LALT]  = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT),
-  [TD_A_TAB]  = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB),
-  [TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
-};
-
-// don't know what this is doing...
-/*
-void led_set_user(uint8_t usb_led) {
-
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-    DDRD |= (1 << 5); PORTD &= ~(1 << 5);
-  } else {
-    DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
-  }
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-    DDRB |= (1 << 0); PORTB &= ~(1 << 0);
-  } else {
-    DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
-  }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
-}
-*/
diff --git a/keyboards/gherkin/keymaps/mjt/rules.mk b/keyboards/gherkin/keymaps/mjt/rules.mk
deleted file mode 100644
index b397f86d04..0000000000
--- a/keyboards/gherkin/keymaps/mjt/rules.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-## not sure where this stuff goes ##
-MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE=yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/gherkin/keymaps/steno/config.h b/keyboards/gherkin/keymaps/steno/config.h
deleted file mode 100644
index abacefa01d..0000000000
--- a/keyboards/gherkin/keymaps/steno/config.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define NO_ACTION_LAYER
-#define NO_ACTION_TAPPING
-#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
-#endif
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/steno/keymap.c b/keyboards/gherkin/keymaps/steno/keymap.c
deleted file mode 100644
index c7ee63d126..0000000000
--- a/keyboards/gherkin/keymaps/steno/keymap.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "keymap_steno.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT_ortho_3x10(
-    STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR ,
-    STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR ,
-    STN_NUM, STN_NUM, STN_A,   STN_O,   STN_NUM, STN_E,   STN_U,   STN_NUM, STN_NUM, STN_NUM),
-};
-
-void matrix_init_user() {
-  steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
-}
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/steno/readme.md b/keyboards/gherkin/keymaps/steno/readme.md
deleted file mode 100644
index 6536ed7aba..0000000000
--- a/keyboards/gherkin/keymaps/steno/readme.md
+++ /dev/null
@@ -1,9 +0,0 @@
-# Gherkin Steno
-
-This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could).
-
-> Note: The number bar has been moved to the bottom row in all the left-over spaces.
-
-    | S | T | P | H | * | F | P | L | T | D |
-    | S | K | W | R | * | R | B | G | S | Z |
-    | # | # | A | O | # | E | U | # | # | # |
diff --git a/keyboards/gherkin/keymaps/steno/rules.mk b/keyboards/gherkin/keymaps/steno/rules.mk
deleted file mode 100644
index fa813f2099..0000000000
--- a/keyboards/gherkin/keymaps/steno/rules.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
-STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
-
-BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
-CONSOLE_ENABLE = no    # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/talljoe_gherkin/config.h b/keyboards/gherkin/keymaps/talljoe_gherkin/config.h
deleted file mode 100644
index 3e9e692d3c..0000000000
--- a/keyboards/gherkin/keymaps/talljoe_gherkin/config.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define PREVENT_STUCK_MODIFIERS
-
-#endif
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/talljoe_gherkin/keymap.c b/keyboards/gherkin/keymaps/talljoe_gherkin/keymap.c
deleted file mode 100644
index ea2921924e..0000000000
--- a/keyboards/gherkin/keymaps/talljoe_gherkin/keymap.c
+++ /dev/null
@@ -1,58 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "keymap_steno.h"
-
-#define ST_BOLT QK_STENO_BOLT
-#define ST_GEM  QK_STENO_GEMINI
-
-#define XXXXXXX KC_NO
-
-enum keyboard_layers {
-  _QWERTY,
-  _RAISE,
-  _LOWER,
-  _PLOVER,
-  _ADJUST
-};
-
-#define ADJ_Z   LT(_ADJUST, KC_Z)
-#define RS_BSPC LT(_RAISE, KC_BSPC)
-#define LW_SPC LT(_LOWER, KC_SPC)
-#define MO_ADJ  MO(_ADJUST)
-#define TG_PLV  TG(_PLOVER)
-#define OS_LCTL OSM(MOD_LCTL)
-#define OS_LALT OSM(MOD_LALT)
-#define OS_LGUI OSM(MOD_LGUI)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = LAYOUT_ortho_3x10(
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
-    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_RSFT,
-    ADJ_Z,   KC_X,    KC_C,    KC_V,    RS_BSPC, LW_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
-  ),
-
-  [_RAISE] = LAYOUT_ortho_3x10(
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_7,    KC_9,    KC_0,
-    KC_ESC,  KC_MINS, KC_EQL,  _______, KC_LBRC, KC_RBRC, _______, KC_QUOT, KC_SCLN, _______,
-    OS_LCTL, OS_LGUI, OS_LALT, KC_GRV,  _______, KC_TAB,  KC_BSLS, KC_COMM, KC_DOT,  KC_SLSH
-  ),
-
-  [_LOWER] = LAYOUT_ortho_3x10(
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   XXXXXXX, KC_PGUP, KC_HOME, KC_UP,   KC_END,  XXXXXXX,
-    KC_F5,   KC_F6,   KC_F7,   KC_F8,   XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______,
-    KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______, OS_LALT, OS_LGUI, OS_LCTL, KC_CAPS
-  ),
-
-  [_PLOVER] = LAYOUT_ortho_3x10(
-    STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR,
-    STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR,
-    MO_ADJ,  STN_NUM, STN_A,   STN_O,   STN_NUM, STN_E,   STN_U,   STN_NUM, STN_NUM, XXXXXXX
-  ),
-
-  [_ADJUST] = LAYOUT_ortho_3x10(
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ST_BOLT, ST_GEM,  TG_PLV,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET
-  ),
-
-};
diff --git a/keyboards/gherkin/keymaps/talljoe_gherkin/rules.mk b/keyboards/gherkin/keymaps/talljoe_gherkin/rules.mk
deleted file mode 100644
index 02216ecb36..0000000000
--- a/keyboards/gherkin/keymaps/talljoe_gherkin/rules.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
diff --git a/keyboards/gherkin/keymaps/wanleg/config.h b/keyboards/gherkin/keymaps/wanleg/config.h
deleted file mode 100644
index 98e2b23380..0000000000
--- a/keyboards/gherkin/keymaps/wanleg/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-#endif
-
-#define PREVENT_STUCK_MODIFIERS
-
-//Tap Dance Prerequisite
-#define TAPPING_TERM 200
-
-//Mousekeys Settings
-#define MOUSEKEY_INTERVAL 16
-#define MOUSEKEY_DELAY 0
-#define MOUSEKEY_TIME_TO_MAX 60
-#define MOUSEKEY_MAX_SPEED 7
-#define MOUSEKEY_WHEEL_DELAY 0
-
-/* for QMK DFU bootloader */
-/* not required if using default ProMicro bootloader */
-/* set top left key as bootloader mode escape key */
-#define QMK_ESC_OUTPUT B4 // usually COL
-#define QMK_ESC_INPUT F7 // usually ROW
-#define QMK_LED B0
\ No newline at end of file
diff --git a/keyboards/gherkin/keymaps/wanleg/keymap.c b/keyboards/gherkin/keymaps/wanleg/keymap.c
deleted file mode 100644
index 108ed40e53..0000000000
--- a/keyboards/gherkin/keymaps/wanleg/keymap.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Copyright 2017 Brian Fong
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define DIR 1
-#define NUM 2
-#define ETC 3
-
-// Readability keycodes
-#define _______ KC_TRNS
-
-
-/////////////// TAP DANCE SECTION START ///////////////
-//Tap Dance Declarations (list of my tap dance configurations)
-enum {
-  TD_SFT_CAPS = 0
-  ,TD_Q_ESC
-  ,ENT_TAP_DANCE
-  ,DEL_TAP_DANCE
-};
-
-///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
-///// (no need to edit this section) /////
-//Enums used to clearly convey the state of the tap dance
-enum {
-  SINGLE_TAP = 1,
-  SINGLE_HOLD = 2,
-  DOUBLE_TAP = 3,
-  DOUBLE_HOLD = 4,
-  DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
-  // Add more enums here if you want for triple, quadruple, etc.
-};
-
-typedef struct {
-  bool is_press_action;
-  int state;
-} tap;
-
-int cur_dance (qk_tap_dance_state_t *state) {
-  if (state->count == 1) {
-    //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
-    if (state->interrupted || !state->pressed) return SINGLE_TAP;
-    if (state->interrupted) return SINGLE_TAP;
-    else return SINGLE_HOLD;
-  }
-  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
-  //with single tap.
-  else if (state->count == 2) {
-    if (state->interrupted) return DOUBLE_SINGLE_TAP;
-    else if (state->pressed) return DOUBLE_HOLD;
-    else return DOUBLE_TAP;
-  }
-  else return 6; //magic number. At some point this method will expand to work for more presses
-}
-///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
-///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
-//instantialize an instance of 'tap' for the 'ENT' tap dance.
-static tap ENTtap_state = {
-  .is_press_action = true,
-  .state = 0
-};
-
-void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
-  ENTtap_state.state = cur_dance(state);
-  switch (ENTtap_state.state) {
-    case SINGLE_TAP: register_code(KC_SPC); break;
-    case SINGLE_HOLD: register_code(KC_LSFT); break;
-    case DOUBLE_TAP: register_code(KC_ENT); break;
-    case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
-    case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
-    //Last case is for fast typing. Assuming your key is `f`:
-    //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
-    //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
-  }
-}
-
-void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
-  switch (ENTtap_state.state) {
-    case SINGLE_TAP: unregister_code(KC_SPC); break;
-    case SINGLE_HOLD: unregister_code(KC_LSFT); break;
-    case DOUBLE_TAP: unregister_code(KC_ENT); break;
-    case DOUBLE_HOLD: unregister_code(KC_NO);
-    case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
-  }
-  ENTtap_state.state = 0;
-}
-
-//instanalize an instance of 'tap' for the 'DEL' tap dance.
-static tap DELtap_state = {
-  .is_press_action = true,
-  .state = 0
-};
-
-void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
-  DELtap_state.state = cur_dance(state);
-  switch (DELtap_state.state) {
-    case SINGLE_TAP: register_code(KC_BSPC); break;
-    case SINGLE_HOLD: register_code(KC_LCTL); break;
-    case DOUBLE_TAP: register_code(KC_DEL); break;
-    case DOUBLE_HOLD: register_code(KC_NO); break;
-    case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
-  }
-}
-
-void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
-  switch (DELtap_state.state) {
-    case SINGLE_TAP: unregister_code(KC_BSPC); break;
-    case SINGLE_HOLD: unregister_code(KC_LCTL); break;
-    case DOUBLE_TAP: unregister_code(KC_DEL); break;
-    case DOUBLE_HOLD: unregister_code(KC_NO);
-    case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
-  }
-  DELtap_state.state = 0;
-}
-///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
-
-//Tap Dance Definitions
-//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
-qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
-// Other declarations would go here, separated by commas, if you have them
- ,[TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
- ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
- ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
-};
-
-//In Layer declaration, add tap dance item in place of a key code
-//TD(TD_SFT_CAPS)
-
-///////////// TAP DANCE SECTION END ///////////////
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Qwerty
-   * .-----------------------------------------------------------------------------------------.
-   * | Q//ESC | W      | E      | R      | T      | Y      | U      | I      | O      | P      |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | A      | S      | D      | F      | G      | H      | J      | K      | L      | SPACE  |
-   * |        |        |        |        |        |        |        |        |        |SFThold |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | Z      | X      | C      | V/NUM  | B/ETC  | N      | M/DIR  | ,/GUI  | ./ALT  | BKSC   |
-   * | SFThold|        |        |        |        |        |        |        |        |CTRLhold|
-   * '-----------------------------------------------------------------------------------------'
-   */
-  [_QW] = LAYOUT_ortho_3x10( /* Qwerty*/
-    TD(TD_Q_ESC), KC_W,    KC_E,    KC_R,          KC_T,          KC_Y, KC_U,          KC_I,           KC_O,          KC_P,
-    KC_A,         KC_S,    KC_D,    KC_F,          KC_G,          KC_H, KC_J,          KC_K,           KC_L,          SFT_T(KC_SPC),
-    SFT_T(KC_Z),  KC_X,    KC_C,    LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
-  ),
-
-  /*
-   *  Directional Modifiers
-   * .-----------------------------------------------------------------------------------------.
-   * | TAB    |   up   |        | INS    |  CTRL  | SHIFT  | PgUp   | HOME   |  -     |  =     |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | left   |  down  | right  | PrScr  | SHIFT  |  CTRL  | PgDn   | END    |  [     |  ]     |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |  /     |
-   * '-----------------------------------------------------------------------------------------'
-   */
-  [DIR] = LAYOUT_ortho_3x10( /* Directional Modifiers */
-    KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,
-    KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC,
-    KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_LALT, KC_SLSH
-  ),
-
-  /*
-   *  Numbers
-   * .-----------------------------------------------------------------------------------------.
-   * | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | F11    | F12    |        |        |        | ENTER  | SHIFT  | GUI    | ./ALT  | BKSC   |
-   * |        |        |        |        |        |        |        |        |        |CTRLhold|
-   * '-----------------------------------------------------------------------------------------'
-   */
-  [NUM] = LAYOUT_ortho_3x10 ( /* Numbers */
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
-    KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
-  ),
-
-  /*
-   *  ETC
-   * .-----------------------------------------------------------------------------------------.
-   * |  `     | mUP    |        |        | RESET  | SHIFT  | mUp    | mDown  |        |  \     |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | mLeft  | mDown  | mRight |        | SHIFT  | mBtn3  | mBtn1  | mBtn2  |  ;     |  '     |
-   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-   * | Sft//Cp|        |        |        |        | C-A-D  | mLeft  | mRight | ALT    |  DEL   |
-   * '-----------------------------------------------------------------------------------------'
-   */
-  [ETC] = LAYOUT_ortho_3x10( /* ETC */
-    KC_GRV,  KC_MS_U, _______, _______, RESET,   KC_RSFT, KC_WH_U, KC_WH_D, _______, KC_BSLS,
-    KC_MS_L, KC_MS_D, KC_MS_R, _______, KC_LSFT, KC_BTN3, KC_BTN1, KC_BTN2, KC_SCLN, KC_QUOT,
-    TD(TD_SFT_CAPS), _______, _______, _______, _______, LALT(LCTL(KC_DEL)), KC_WH_L, KC_WH_R, KC_LALT, KC_DEL
-  ),
-
-};
diff --git a/keyboards/gherkin/keymaps/wanleg/readme.md b/keyboards/gherkin/keymaps/wanleg/readme.md
deleted file mode 100644
index 0b1b099c4a..0000000000
--- a/keyboards/gherkin/keymaps/wanleg/readme.md
+++ /dev/null
@@ -1,86 +0,0 @@
-![Gherkin Wanleg Layout Image](https://i.imgur.com/nCPog2W.png)  
-# Gherkin Wanleg Layout
-This is the layout I came up with to preserve a standard QWERTY 104 key ANSI layout as much as possible, in as few layers as possible for a 30 key board. 
-I originally set up a few Tap Dance keys, but dropped half of them in favor of chorded versions since in actual use, they tended to impede typing speed more than their current two-key versions. 
-I've left them in my `keymap.c` ready for use if anyone wants to try them out:
-
-Legend Name | Single Tap | Double Tap | Hold
---- | --- | --- | ---
-*null* | space | enter | shift
-*null* | backspace | delete | control
-Sft//Cp | shift | caps lock | *null*
-Q//Esc | KC_Q | escape | *null*
-
-# Gherkin Flashing
-## Windows
-1. The standard Gherkin uses a ProMicro (or clone) microcontroller, which has the Caterina bootloader by default.
-2. If you have never flashed your ProMicro with QMK before, you will need to short the RST pin to GND to put it into bootloader mode (you only have 7 seconds to flash once it enters bootloader mode). You may need to touch the RST pin to GND **TWICE** in quick succession if it doesn't flash with just one touch.  
-3. Once connected to your computer, you should be able to flash using  
-`make gherkin:wanleg:avrdude`  
-4. Once you've been able to successfully flash the ProMicro, you should be able to use the `RESET` key for future flashes instead of shorting the RST pin.
-
-## Linux  
-### First Flash with QMK  
-The built-in `:avrdude` QMK target in Linux doesn't work with the default Caterina bootloader on the ProMicro, so we have to use avrdude separately. The instructions below are adapted from https://deskthority.net/workshop-f7/how-to-use-a-pro-micro-as-a-cheap-controller-converter-like-soarer-s-t8448.html
-
-1. To flash the device, you need to have AVRdude installed. You can do this via your distro's package manager (or compile from source if needed).
-2. Once avrdude has been installed, open a terminal and run
-`ls /dev/tty*`
-3. Next, plug in your device and re-run `ls /dev/tty*`
-There should be one more device than was seen previously. Make a note of it. For me, it's `/dev/ttyACM0`.
-4. Navigate to the directory with your `.hex` file in it. Touch the RST pin to GND **TWICE** in quick succession, then run the following within 7 seconds:  
-`sudo avrdude -p m32u4 -P YOUR_SERIAL_PORT -c avr109 -U flash:w:YOUR_FILENAME.hex`  
-Replace YOUR_SERIAL_PORT with your serial port's device name, and YOUR_FILENAME.hex with the appropriate filename. For me, it looks like this:  
-`sudo avrdude -p m32u4 -P /dev/ttyACM0 -c avr109 -U flash:w:gherkin_wanleg.hex`  
-If you miss the 7 second window, the ProMicro will leave bootloader mode and the flash will fail. Hit `Control` + `C` to exit the `avrdude` command, connect RST to GND twice quickly, and try the `avrdude` command again.
-
-### Subsequent Flashes with QMK
-1. Re-flashing is similar to the initial flash procedure. Plug in your keyboard, open a terminal and run
-`ls /dev/tty*`
-2. Next, hit the `RESET` key on your keyboard and re-run the `ls /dev/tty*` command to find your keyboard's serial port.  
-3. Flash your keyboard with the avrdude command you used for the initial flash within 7 seconds after hitting `RESET`.
-
-# ProMicro Bootloader Replacement (Caterina to QMK DFU)
-If you have an Arduino (or clone), you can replace the bootloader for a few extra features (e.g. no more 7 second "flash window", simplified Linux flashing, blinking LED when the ProMicro is in bootloader mode, ability to exit bootloader mode without unplugging your keyboard, among others).
-The instructions below have been adapted from https://www.reddit.com/r/olkb/comments/8sxgzb/replace_pro_micro_bootloader_with_qmk_dfu/)
-## Arduino Setup
-1. Upload the ArduinoISP sketch onto your Arduino board (https://www.arduino.cc/en/Tutorial/ArduinoISP).
-2. Wire the Arduino to the ProMicro
-
-| Arduino | ProMicro |
-| --- | --- |
-| 10 | RST |
-| 11 | 16 |
-| 12 | 14 |
-| 13 | 15 |
-| GND | GND |
-| 5V | VCC |
-
-## Make the QMK DFU .hex
-3. In `config.h` add the following. This is already set up in `qmk_firmware/keyboards/gherkin/wanleg`. You only need to do this on other keymaps.
-```
-#define QMK_ESC_OUTPUT B4
-#define QMK_ESC_INPUT F7
-#define QMK_LED B0
-```
-The `QMK_ESC_` lines define where the bootloader escape key is. Refer to the `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` lines in your keyboard's `config.h` to choose your preferred key.  
-You hit the bootloader escape key to exit bootloader mode after you've hit the RESET key to enter bootloader mode (e.g. if you change your mind and don't want to flash just then).  
-On a Gherkin, B4/F7 corresponds to the top-left corner key.  
-`B0` is an indicator light on one of the ProMicro's onboard LEDs. With QMK DFU, it will flash to indicate the ProMicro is in bootloader mode.  
-You can add `#define QMK_SPEAKER C6` if you have a speaker hooked up to pin C6. The Gherkin PCB already uses pin C6 in its switch layout, so you cannot use a speaker on a standard Gherkin.  
-4. Also, you should add `BOOTLOADER = qmk-dfu` to your `rules.mk` file, so it is flagged properly. Again, this is already set up in `qmk_firmware/keyboards/gherkin/wanleg`.  
-5. Once you've made the required edits, it's time to compile the firmware. If you use the `:production` target when compiling, it will produce the usual `.hex` file as well as `_bootloader.hex` and `_production.hex` files. The `_production.hex` will be what we want. This contains the bootloader and the firmware, so we only have to flash once (rather than flash the bootloader, and THEN flash the firmware).
-For example  
-`make <keyboard>:<keymap>:production`  
-For my particular keymap, for reasons listed in the **Using QMK DFU** section, you should use the following to ensure the bootloader is set properly  
-`make gherkin:wanleg:production dfu=qmk`  
-
-## Burn QMK DFU
-6. Navigate to the directory with your `_production.hex` file, and burn it with the following command  
-`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U YOUR_production.hex -P comPORT`  
-Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
-
-## Using QMK DFU
-7. Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
-`make gherkin:<keymap>:dfu dfu=qmk`  
-The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` 
diff --git a/keyboards/gherkin/keymaps/wanleg/rules.mk b/keyboards/gherkin/keymaps/wanleg/rules.mk
deleted file mode 100644
index 7f2ff33277..0000000000
--- a/keyboards/gherkin/keymaps/wanleg/rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-TAP_DANCE_ENABLE = yes		# Enable Tap Dance (comment if not being implemented)
-
-#If ProMicro has QMK DFU bootloader instead of Caterina,
-#run "make <keyboard>:<keymap> dfu=qmk" when compiling to ensure it is flagged properly after being flashed
-ifeq ($(strip $(dfu)), qmk)
-    BOOTLOADER = qmk-dfu
-endif
\ No newline at end of file
diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk
deleted file mode 100644
index 416ca5e5f4..0000000000
--- a/keyboards/gherkin/rules.mk
+++ /dev/null
@@ -1,59 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
-
-LAYOUTS = ortho_3x10