Clean ChibiOS platform files (#10505)

* Clean ChibiOs platform files

* Remove I2C and timer definitions

* Remove unnecessary files and rename readme

Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>

4 files changed, 0 insertions, 1492 deletions

diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h
deleted file mode 100644
index 7dc4f84a8a..0000000000
--- a/keyboards/handwired/riblee_f401/chconf.h
+++ /dev/null
@@ -1,714 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    rt/templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION                32
-#endif
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY                 10000
-#endif
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE               32
-#endif
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE              32
-#endif
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA                 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM                 0
-#endif
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE                 0
-#endif
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM                       TRUE
-#endif
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY                 TRUE
-#endif
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT                 TRUE
-#endif
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES               TRUE
-#endif
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-#endif
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES                  TRUE
-#endif
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-#endif
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS                 TRUE
-#endif
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS                   TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES                 TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-#endif
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES                TRUE
-#endif
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE                  TRUE
-#endif
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP                     TRUE
-#endif
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-#endif
-
-/**
- * @brief   Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS                TRUE
-#endif
-
-/**
- * @brief   Pipes APIs.
- * @details If enabled then the pipes APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES                    TRUE
-#endif
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC                  TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY                  TRUE
-#endif
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-#endif
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
-#endif
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
-#endif
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES           TRUE
-#endif
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES            TRUE
-#endif
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
-#endif
-
-/**
- * @brief   Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES                TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS                   FALSE
-#endif
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS                FALSE
-#endif
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-#endif
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-#endif
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS                 FALSE
-#endif
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING            FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/riblee_f401/halconf.h b/keyboards/handwired/riblee_f401/halconf.h
deleted file mode 100644
index a8db392aaa..0000000000
--- a/keyboards/handwired/riblee_f401/halconf.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                         TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                         FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                         FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                         FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                         FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                         FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI                     FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL                      FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB                  FALSE
-#endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO                         FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                         FALSE
-#endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG                        FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                        FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                         TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                         FALSE
-#endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI                        FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS                   FALSE
-#endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT                        FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE                  TRUE
-#endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS           FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY                   FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS                      TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING                    TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY                      100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT                     FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING                    TRUE
-#endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20                    0x50FF8000U
-#endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR                        0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE              38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE             256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER           2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR                    FALSE
-#endif
-
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT                       FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION           FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                        TRUE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT                       TRUE
-#endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/keyboards/handwired/riblee_f401/mcuconf.h b/keyboards/handwired/riblee_f401/mcuconf.h
deleted file mode 100644
index ba6e934fe7..0000000000
--- a/keyboards/handwired/riblee_f401/mcuconf.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_CLOCK48_REQUIRED              TRUE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE                    25       
-#define STM32_PLLN_VALUE                    336     
-#define STM32_PLLP_VALUE                    4       
-#define STM32_PLLQ_VALUE                    7       
-#define STM32_HPRE                          STM32_HPRE_DIV1  
-#define STM32_PPRE1                         STM32_PPRE1_DIV4  
-#define STM32_PPRE2                         STM32_PPRE2_DIV2 
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE                  8
-#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE                 192
-#define STM32_PLLI2SR_VALUE                 5
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE                 FALSE
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY            6
-#define STM32_IRQ_EXTI1_PRIORITY            6
-#define STM32_IRQ_EXTI2_PRIORITY            6
-#define STM32_IRQ_EXTI3_PRIORITY            6
-#define STM32_IRQ_EXTI4_PRIORITY            6
-#define STM32_IRQ_EXTI5_9_PRIORITY          6
-#define STM32_IRQ_EXTI10_15_PRIORITY        6
-#define STM32_IRQ_EXTI16_PRIORITY           6
-#define STM32_IRQ_EXTI17_PRIORITY           15
-#define STM32_IRQ_EXTI18_PRIORITY           6
-#define STM32_IRQ_EXTI19_PRIORITY           6
-#define STM32_IRQ_EXTI20_PRIORITY           6
-#define STM32_IRQ_EXTI21_PRIORITY           15
-#define STM32_IRQ_EXTI22_PRIORITY           15
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM9                  FALSE
-#define STM32_GPT_USE_TIM11                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM9_IRQ_PRIORITY         7
-#define STM32_GPT_TIM11_IRQ_PRIORITY        7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_USE_I2C3                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C3_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_I2C3_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2                  FALSE
-#define STM32_I2S_USE_SPI3                  FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY         10
-#define STM32_I2S_SPI3_IRQ_PRIORITY         10
-#define STM32_I2S_SPI2_DMA_PRIORITY         1
-#define STM32_I2S_SPI3_DMA_PRIORITY         1
-#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM9                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM9_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM9                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM9_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART6             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART6_PRIORITY        12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART6               FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART6_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART6_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1                  TRUE
-#define STM32_USB_OTG1_IRQ_PRIORITY         14
-#define STM32_USB_OTG1_RX_FIFO_SIZE         512
-#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1
-#define STM32_USB_OTG_THREAD_STACK_SIZE     128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */
diff --git a/keyboards/handwired/riblee_f401/README.md b/keyboards/handwired/riblee_f401/readme.md
index 6287ac40c1..6287ac40c1 100644
--- a/keyboards/handwired/riblee_f401/README.md
+++ b/keyboards/handwired/riblee_f401/readme.md