Merge branch 'master' of https://github.com/Dbroqua/qmk_firmware

13 files changed, 505 insertions, 107 deletions

diff --git a/keyboards/handwired/pilcrow/Makefile b/keyboards/handwired/pilcrow/Makefile
new file mode 100644
index 0000000000..191c6bb664
--- /dev/null
+++ b/keyboards/handwired/pilcrow/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h
new file mode 100644
index 0000000000..d63eeba36e
--- /dev/null
+++ b/keyboards/handwired/pilcrow/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    You
+#define PRODUCT         pilcrow
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B4, F7, B1, B3 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/pilcrow/keymaps/default/Makefile b/keyboards/handwired/pilcrow/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/config.h b/keyboards/handwired/pilcrow/keymaps/default/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/keymap.c b/keyboards/handwired/pilcrow/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e382e4c6ad
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/keymap.c
@@ -0,0 +1,88 @@
+#include "pilcrow.h"
+#define _______ KC_TRNS
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( \
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, \
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+  KC_LCTL, KC_LALT, KC_LGUI, MO(1),   KC_SPC,  MT(MOD_LSFT, KC_SPC), MO(2),   MO(3),   KC_DEL, KC_ESC \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[1] = KEYMAP( \
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \
+  _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \
+),
+[2] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, \
+  KC_TAB,  KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, \
+  OSM(MOD_LSFT),  KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \
+  _______, _______, _______, _______, KC_ENT,  KC_ENT,  _______, KC_MNXT, KC_VOLD, KC_VOLU \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[3] =  KEYMAP( \
+  RESET,   KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \
+  KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \
+  RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \
+  _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/readme.md b/keyboards/handwired/pilcrow/keymaps/default/readme.md
new file mode 100644
index 0000000000..95472dfca8
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for pilcrow
\ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/pilcrow.c b/keyboards/handwired/pilcrow/pilcrow.c
new file mode 100644
index 0000000000..c8243df7bf
--- /dev/null
+++ b/keyboards/handwired/pilcrow/pilcrow.c
@@ -0,0 +1,28 @@
+#include "pilcrow.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/handwired/pilcrow/pilcrow.h b/keyboards/handwired/pilcrow/pilcrow.h
new file mode 100644
index 0000000000..7138ccb3f6
--- /dev/null
+++ b/keyboards/handwired/pilcrow/pilcrow.h
@@ -0,0 +1,23 @@
+#ifndef PILCROW_H
+#define PILCROW_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \
+}
+
+#endif
diff --git a/keyboards/handwired/pilcrow/readme.md b/keyboards/handwired/pilcrow/readme.md
new file mode 100644
index 0000000000..7a7f6d2af5
--- /dev/null
+++ b/keyboards/handwired/pilcrow/readme.md
@@ -0,0 +1,28 @@
+pilcrow keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk
new file mode 100644
index 0000000000..55898147dd
--- /dev/null
+++ b/keyboards/handwired/pilcrow/rules.mk
@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h
index 473af67d34..23fbfd0b9a 100644
--- a/keyboards/handwired/promethium/config.h
+++ b/keyboards/handwired/promethium/config.h
@@ -20,13 +20,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
+#define USB_VENDOR_ID_LENOVO            0x17ef
+#define USB_DEVICE_ID_LENOVO_TPKBD      0x6009
+#define USB_DEVICE_ID_LENOVO_CUSBKBD    0x6047
+#define USB_DEVICE_ID_LENOVO_CBTKBD     0x6048
+#define USB_DEVICE_ID_LENOVO_TPPRODOCK  0x6067
+
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6660
+#define VENDOR_ID       USB_VENDOR_ID_LENOVO
+#define PRODUCT_ID      USB_DEVICE_ID_LENOVO_CBTKBD
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Priyadi
 #define PRODUCT         Promethium Keyboard
-#define DESCRIPTION     Promethium Keyboard
+#define DESCRIPTION
 
 /* key matrix size */
 #define MATRIX_ROWS 8
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
index bf797a7491..7ae269563f 100644
--- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
+++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
@@ -425,7 +425,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_QWERTY] = KEYMAP(
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT ,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_QUOT, KC_ENT ,
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
   KC_LCTL, KC_LGUI, KC_LALT, PUNC,    NUM,     KC_SPC,  KC_SPC,  FUNC,    EMOJI,   KC_RALT, KC_RGUI, KC_RCTL
 ),
@@ -442,10 +442,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_COLEMAK] = KEYMAP(
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT ,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-  KC_LCTL, KC_LGUI, KC_LALT, PUNC,    NUM,     KC_SPC,  KC_SPC,  FUNC,    EMOJI,   KC_RALT, KC_RGUI, KC_RCTL
+  _______, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_QUOT, _______,
+  _______, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    _______,
+  _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 ),
 
 /* Workman
@@ -460,10 +460,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_WORKMAN] = KEYMAP(
-  KC_TAB,  KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_BSPC,
-  KC_ESC,  KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_ENT ,
-  KC_LSFT, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-  KC_LCTL, KC_LGUI, KC_LALT, PUNC,    NUM,     KC_SPC,  KC_SPC,  FUNC,    EMOJI,   KC_RALT, KC_RGUI, KC_RCTL
+  _______, KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_QUOT, _______,
+  _______, KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    _______,
+  _______, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    KC_COMM, KC_DOT,  KC_SLSH, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 ),
 
 /* Punc
@@ -551,7 +551,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_GUI] = KEYMAP(
   _______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______,
-    LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY,
+    LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,KC_PAUS, QWERTY,
       WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK,
       OSX, _______, _______, _______, _______,  BL_DEC,  BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN
 ),
@@ -582,6 +582,39 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   #endif
 
   switch (keycode) {
+    // QWERTZ style comma and dot: semicolon and colon when shifted
+    case KC_COMM:
+      if (record->event.pressed) {
+        bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT);
+        bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT);
+        if (lshifted || rshifted) {
+          if (lshifted) unregister_code(KC_LSFT);
+          if (rshifted) unregister_code(KC_RSFT);
+          register_code(KC_SCLN);
+          unregister_code(KC_SCLN);
+          if (lshifted) register_code(KC_LSFT);
+          if (rshifted) register_code(KC_RSFT);
+        } else {
+          register_code(KC_COMM);
+          unregister_code(KC_COMM);
+        }
+      }
+      return false;
+      break;
+    case KC_DOT:
+      if (record->event.pressed) {
+        if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) {
+          register_code(KC_SCLN);
+          unregister_code(KC_SCLN);
+        } else {
+          register_code(KC_DOT);
+          unregister_code(KC_DOT);
+        }
+      }
+      return false;
+      break;
+
+    // layout switchers
     case QWERTY:
       if (record->event.pressed) {
         #ifdef AUDIO_ENABLE
@@ -610,8 +643,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       return false;
       break;
 
-
-
+    // layer switcher
     case PUNC:
       if (record->event.pressed) {
         layer_on(_PUNC);
@@ -673,7 +705,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       return false;
       break;
 
-
+    // OS switchers
     case LINUX:
       set_unicode_input_mode(UC_LNX);
       #ifdef AUDIO_ENABLE
@@ -736,106 +768,36 @@ void shutdown_user()
 
 
 void ps2_mouse_init_user() {
+    uint8_t rcv;
+
     // set TrackPoint sensitivity
     PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2");
     PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81");
     PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A");
-    PS2_MOUSE_SEND(0x60, "set trackpoint sensitivity: 0x60");
+    PS2_MOUSE_SEND(0x49, "set trackpoint sensitivity: 0x59");
+
+    // set TrackPoint Negative Inertia factor
+    PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2");
+    PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81");
+    PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D");
+    PS2_MOUSE_SEND(0x06, "set negative inertia factor: 0x06");
 
     // set TrackPoint speed
     // (transfer function upper plateau speed)
     PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2");
     PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81");
     PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60");
-    PS2_MOUSE_SEND(0x90, "set trackpoint speed: 0x90");
+    PS2_MOUSE_SEND(0x61, "set trackpoint speed: 0x61");
 
-    // set TrackPoint Negative Inertia factor
-    PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2");
-    PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81");
-    PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D");
-    PS2_MOUSE_SEND(0x03, "set negative inertia factor: 0x03");
-
-    // disable up threshold (click)
-    PS2_MOUSE_SEND(0xE2, "set disable up threshold: 0xE2");
-    PS2_MOUSE_SEND(0x47, "set disable up threshold: 0x47");
-    PS2_MOUSE_SEND(0x2C, "set disable up threshold: 0x2C");
-    PS2_MOUSE_SEND(0x01, "set disable up threshold: 0x01");
-
-    // enable TrackPoint Press to Select (PtS)
-    // print("ps2_mouse_init: send 0xE2: ");
-    // rcv = ps2_host_send(0xE2);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x47: ");
-    // rcv = ps2_host_send(0x47);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x2C: ");
-    // rcv = ps2_host_send(0x2C);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x00: ");
-    // rcv = ps2_host_send(0x00);
-    // phex(rcv); phex(ps2_error); print("\n");
-
-    // set TrackPoint Press to Select threshold
-    // print("ps2_mouse_init: send 0xE2: ");
-    // rcv = ps2_host_send(0xE2);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x81: ");
-    // rcv = ps2_host_send(0x81);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x5C: ");
-    // rcv = ps2_host_send(0x5C);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // // default PtS threshold is 0x08
-    // print("ps2_mouse_init: send 0x04: ");
-    // rcv = ps2_host_send(0x04);
-    // phex(rcv); phex(ps2_error); print("\n");
-
-    // set TrackPoint Press to Select time constant (zTc)
-    // print("ps2_mouse_init: send 0xE2: ");
-    // rcv = ps2_host_send(0xE2);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x81: ");
-    // rcv = ps2_host_send(0x81);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // print("ps2_mouse_init: send 0x5E: ");
-    // rcv = ps2_host_send(0x5E);
-    // phex(rcv); phex(ps2_error); print("\n");
-    // // default zTc is 0x26
-    // print("ps2_mouse_init: send 0x45: ");
-    // rcv = ps2_host_send(0x45);
-    // phex(rcv); phex(ps2_error); print("\n");
-
-    /*
-    // set TrackPoint Press to Select Jenks Curvature (jkcur)
-    print("ps2_mouse_init: send 0xE2: ");
-    rcv = ps2_host_send(0xE2);
-    phex(rcv); phex(ps2_error); print("\n");
-    print("ps2_mouse_init: send 0x81: ");
-    rcv = ps2_host_send(0x81);
-    phex(rcv); phex(ps2_error); print("\n");
-    print("ps2_mouse_init: send 0x5D: ");
-    rcv = ps2_host_send(0x5D);
-    phex(rcv); phex(ps2_error); print("\n");
-    // default jkcur is 0x87
-    print("ps2_mouse_init: send 0x87: ");
-    rcv = ps2_host_send(0x87);
-    phex(rcv); phex(ps2_error); print("\n");
-    */
-
-    /*
-    // set TrackPoint Minimum Drag (mindrag)
-    print("ps2_mouse_init: send 0xE2: ");
+    // inquire pts status
     rcv = ps2_host_send(0xE2);
-    phex(rcv); phex(ps2_error); print("\n");
-    print("ps2_mouse_init: send 0x81: ");
-    rcv = ps2_host_send(0x81);
-    phex(rcv); phex(ps2_error); print("\n");
-    print("ps2_mouse_init: send 0x59: ");
-    rcv = ps2_host_send(0x59);
-    phex(rcv); phex(ps2_error); print("\n");
-    // default PtS mindrag is 0x14
-    print("ps2_mouse_init: send 0x14: ");
-    rcv = ps2_host_send(0x14);
-    phex(rcv); phex(ps2_error); print("\n");
-    */
+    rcv = ps2_host_send(0x2C);
+    rcv = ps2_host_recv_response();
+    if ((rcv & 1) == 1) {
+      // if on, disable pts
+      rcv = ps2_host_send(0xE2);
+      rcv = ps2_host_send(0x47);
+      rcv = ps2_host_send(0x2C);
+      rcv = ps2_host_send(0x01);
+    }
 }
\ No newline at end of file
diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk
index 891f523c22..465ef3359a 100644
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -1,4 +1,3 @@
-
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -66,6 +65,8 @@ BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 PS2_MOUSE_ENABLE ?= yes
 PS2_USE_INT ?= yes
+ADAFRUIT_BLE_ENABLE ?= yes
+API_SYSEX_ENABLE ?= no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend