Merge https://github.com/jackhumbert/qmk_firmware

10 files changed, 337 insertions, 94 deletions

diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile
index 6fe973e1eb..4e2a6f00fd 100644
--- a/keyboards/hhkb/Makefile
+++ b/keyboards/hhkb/Makefile
@@ -1,90 +1,3 @@
-
-
-# project specific files
-SRC = matrix.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-#OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# as per original hasu settings
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the HHKB
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
-
-ifneq (, $(findstring yes, $(HHKB_JP)))
-	OPT_DEFS += -DHHKB_JP
-endif
-
-debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
-debug-on: all
-
-debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
-debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
-debug-off: all
+endif
\ No newline at end of file
diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c
new file mode 100644
index 0000000000..2b6d3901a4
--- /dev/null
+++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c
@@ -0,0 +1,92 @@
+/*
+ * dbroqua HHKB Layout
+ */
+#include "hhkb.h"
+
+#define BASE 0
+#define FN 1
+#define MOUSE 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* BASE Level: Default Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+     * |-----------------------------------------------------------------------------------------+
+     * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+     * |-----------------------------------------------------------------------------------------+
+     * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+     * |-----------------------------------------------------------------------------------------+
+     * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | Shift     | fn  |
+     * +-----------------------------------------------------------------------------------------+
+     *         | Gui |  Alt   |               Space               | AltGr |Mouse|
+     *         `----------------------------------------------------------------´
+     */
+    [BASE] = KEYMAP(
+        KC_ESC,   KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,     KC_9,    KC_0,     KC_MINS,  KC_EQL,    KC_BSLS,  KC_GRV, \
+        KC_TAB,   KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,     KC_O,    KC_P,     KC_LBRC,  KC_RBRC,   KC_BSPC,          \
+        KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,     KC_L,    KC_SCLN,  KC_QUOT,  KC_ENT,                      \
+        KC_LSFT,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM,  KC_DOT,  KC_SLSH,  KC_RSFT,  MO(FN),                    \
+                        KC_LGUI, KC_LALT,  /*        */ KC_SPC, KC_RALT, MO(MOUSE)
+    ),
+
+    /* FN Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * | Pwr |  F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F0  | F11 | F12 | Ins | Del|
+     * |-----------------------------------------------------------------------------------------+
+     * | Caps   |     |     |     |     |     |     |     |PrtSc| Slck| Paus|  Up |     |        |
+     * |-----------------------------------------------------------------------------------------+
+     * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left |Right|            |
+     * |-----------------------------------------------------------------------------------------+
+     * |           | Prev| Play| Next|     |     | +   | -   | End |PgDwn| Down|           |     |
+     * +-----------------------------------------------------------------------------------------+
+     *         |     |        |                                   | Stop  |     |
+     *         `----------------------------------------------------------------´
+     */
+    [FN] = KEYMAP(
+        KC_PWR,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+        KC_CAPS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_UP,    KC_TRNS,  KC_TRNS,          \
+        KC_TRNS,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_PAST,  KC_PSLS,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,  KC_TRNS,                    \
+        KC_TRNS,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_TRNS,  KC_TRNS,  KC_PPLS,  KC_PMNS,  KC_END,   KC_PGDN,  KC_DOWN,  KC_TRNS,  KC_TRNS,                    \
+                        KC_TRNS, KC_TRNS,           KC_TRNS,                KC_MSTP, KC_TRNS
+    ),
+
+    /* MOUSE Layer
+     * ,-----------------------------------------------------------------------------------------.
+     * |     |      |     |     |     |     |     |     |     |     |     |     |     |     |    |
+     * |-----------------------------------------------------------------------------------------+
+     * |        |     | WUp |     |     |     |     |     |     |     | Btn1|  Up | Btn2|        |
+     * |-----------------------------------------------------------------------------------------+
+     * |         | WLt | WDn | WRt |     |     |     |     |     |     | Left |Right|            |
+     * |-----------------------------------------------------------------------------------------+
+     * |           |     |     |     |     |     |     |     |     | Btn3| Down|           |     |
+     * +-----------------------------------------------------------------------------------------+
+     *         |     |        |                                   |       |     |
+     *         `----------------------------------------------------------------´
+     */
+    [MOUSE] = KEYMAP(
+        KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS, \
+        KC_TRNS,  KC_TRNS,  KC_WH_U,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_BTN1,  KC_MS_U,  KC_BTN2,  KC_TRNS,          \
+        KC_TRNS,  KC_WH_L,  KC_WH_D,  KC_WH_R,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MS_L,  KC_MS_R,  KC_TRNS,                    \
+        KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_BTN3,  KC_MS_D,  KC_TRNS,  KC_TRNS,                    \
+                        KC_TRNS, KC_TRNS,           KC_TRNS,                KC_TRNS, KC_TRNS
+    )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/hhkb/keymaps/dbroqua/readme.md b/keyboards/hhkb/keymaps/dbroqua/readme.md
new file mode 100644
index 0000000000..0afebc84c8
--- /dev/null
+++ b/keyboards/hhkb/keymaps/dbroqua/readme.md
@@ -0,0 +1,9 @@
+# Dbroqua Layout
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/78eaf35e80bb714eea80cb4049dedb01
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua make dfu
+```
\ No newline at end of file
diff --git a/keyboards/hhkb/keymaps/jp/Makefile b/keyboards/hhkb/keymaps/jp/Makefile
index 92986292a2..a7f700f019 100644
--- a/keyboards/hhkb/keymaps/jp/Makefile
+++ b/keyboards/hhkb/keymaps/jp/Makefile
@@ -1 +1 @@
-HHKB_JP=yes
+OPT_DEFS += -DHHKB_JP
diff --git a/keyboards/hhkb/keymaps/rdg_jp/Makefile b/keyboards/hhkb/keymaps/rdg_jp/Makefile
index 92986292a2..a7f700f019 100644
--- a/keyboards/hhkb/keymaps/rdg_jp/Makefile
+++ b/keyboards/hhkb/keymaps/rdg_jp/Makefile
@@ -1 +1 @@
-HHKB_JP=yes
+OPT_DEFS += -DHHKB_JP
diff --git a/keyboards/hhkb/keymaps/sh_jp/Makefile b/keyboards/hhkb/keymaps/sh_jp/Makefile
new file mode 100644
index 0000000000..a7f700f019
--- /dev/null
+++ b/keyboards/hhkb/keymaps/sh_jp/Makefile
@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP
diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md
new file mode 100644
index 0000000000..4f82f2f4e9
--- /dev/null
+++ b/keyboards/hhkb/keymaps/sh_jp/README.md
@@ -0,0 +1,86 @@
+###Keymaps with both Dvorak layout and QWER layout for HHKB JP.  
+
+1. The default layout is Dvorak.
+2. Use `Tog` to toggle between Dvorak and QWER
+3. Holding `NewCmd`, the original `LftCmd`,  will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.<sup>[1](#cmdTab)</sup>
+  - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file.
+4. `Symb` makes type symbols easier
+  - for example: `Symb+a` is `!`.
+5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual.
+6. There's an extra `Tab` in the last line.
+    
+```
+Layer DVOR:
+,-----------------------------------------------------------.
+|Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|   |Bsp|
+|-----------------------------------------------------------|
+|Tab  |  '|   ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|    |
+|------------------------------------------------------` Ent|
+|Ctrl  |  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -|  \|    |
+|-----------------------------------------------------------|
+|Shft   |  ;|  Q|  J|  K|  X|  B|  M| W|  V|  Z|   | Up|    |
+|-----------------------------------------------------------|
+|FN| `| Alt|NewCmd|Symb|  Spc |Symb|Tab|RCmd|Tog|Lft|Dwn|Rgh|
+`-----------------------------------------------------------'
+```
+
+```
+Layer QWER:
+,-----------------------------------------------------------.
+|Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9| 10|  -|  =|   |Bsp|
+|-----------------------------------------------------------|
+|Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     |
+|------------------------------------------------------` Ent|
+|Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|    |
+|-----------------------------------------------------------|
+|Shft   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|   | Up|   |
+|-----------------------------------------------------------|
+|FN| `| Alt|NewCmd|Symb|  Spc  |Symb|Tab|Cmd|Tog|Lft|Dwn|Rgh|
+`-----------------------------------------------------------'
+```
+
+```
+Layer Symb:
+,-----------------------------------------------------------.
+|   |   |   |   |   |   |   |   |   |   |  |   |   |   |    |
+|-----------------------------------------------------------|
+|     |   |   |   [|   ]|   |   |  {|  }|   |   |   |   |   |
+|------------------------------------------------------`    |
+|      |  !|  @|  #|  $|  %|  ^|  &|  *|  (|  )|  '|  \|    |
+|-----------------------------------------------------------|
+|       |   |   |   |   |   |   |   |   |   |   |   |   |   |
+|-----------------------------------------------------------|
+|  |  |    |      |    |       |    |   |   |   |   |   |   |
+`-----------------------------------------------------------'
+```
+
+```
+Layer FUNC: HHKB mode (HHKB Fn)
+,-----------------------------------------------------------.
+|Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+|-----------------------------------------------------------|
+|Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+|------------------------------------------------------`    |
+|      |VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|   |    |
+|-----------------------------------------------------------|
+|       |   |   |   |   |   |  +|  -|End|PgD|Dow|   |   |   |
+|-----------------------------------------------------------|
+|   ||   |   |   |   |         |   |   |   |   ||   |   |   |
+`-----------------------------------------------------------'
+```
+
+```
+Empty Layer:
+,-----------------------------------------------------------.
+|   |   |   |   |   |   |   |   |   |   |  |   |   |   |    |
+|-----------------------------------------------------------|
+|     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+|------------------------------------------------------`    |
+|      |   |   |   |   |   |   |   |   |   |   |   |   |    |
+|-----------------------------------------------------------|
+|       |   |   |   |   |   |   |   |   |   |   |   |   |   |
+|-----------------------------------------------------------|
+|  |  |    |      |    |       |    |   |   |   |   |   |   |
+`-----------------------------------------------------------'
+```
+<a name="cmdTab">1</a>: `NewCmd + Tab` does not work, you can use `RCmd+Tab` to switch among applications.
diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c
new file mode 100644
index 0000000000..d4cb3b0418
--- /dev/null
+++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c
@@ -0,0 +1,60 @@
+#include "hhkb.h"
+
+#define _______ KC_TRNS
+
+enum {
+  DVOR,
+  QWER,
+  NEW_CMD,
+  SYMB,
+  FUNC
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DVOR] = KEYMAP_JP(
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,    KC_7,     KC_8,    KC_9,    KC_0, KC_LBRC,  KC_RBRC, KC_JYEN,  KC_BSPC,
+    KC_TAB,   KC_QUOT, KC_COMM, KC_DOT,  KC_P,     KC_Y,    KC_F,    KC_G,     KC_C,    KC_R,   KC_L, KC_SLSH, KC_EQL,
+    KC_LCTL,  KC_A,    KC_O,    KC_E,    KC_U,     KC_I,    KC_D,    KC_H,     KC_T,    KC_N,   KC_S, KC_MINS, KC_BSLS, KC_ENT,
+    KC_LSFT,  KC_SCLN, KC_Q,    KC_J,    KC_K,     KC_X,    KC_B,    KC_M,     KC_W,    KC_V,   KC_Z,   KC_RO,  KC_UP, KC_RSFT,
+    MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD),   MO(SYMB),    MT(MOD_LSFT, KC_SPC),    MO(SYMB),  KC_TAB, KC_RGUI,   TG(QWER), KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [QWER] = KEYMAP_JP(
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,    KC_7,     KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_JYEN,  KC_BSPC,
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,
+    KC_LCTL,  KC_A,    KC_S,    KC_D,    KC_F,     KC_G,    KC_H,    KC_J,     KC_K,    KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,     KC_B,    KC_N,    KC_M,  KC_COMM,  KC_DOT, KC_SLSH,                      KC_RO, KC_UP, KC_RSFT,
+    MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD),    MO(SYMB),    MT(MOD_LSFT, KC_SPC),    MO(SYMB),  KC_TAB, KC_RGUI,   _______, KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [NEW_CMD] = KEYMAP_JP(
+    _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4),  LGUI(KC_5), LGUI(KC_6), LGUI(KC_7),  LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, LGUI(KC_BSPC),
+    _______,  LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R),  LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U),  LGUI(KC_I), LGUI(KC_O),  LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC),
+    _______,  LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F),  LGUI(KC_G), LGUI(KC_H), LGUI(KC_J),  LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______,
+    LGUI(KC_LSFT),  LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B),  LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM),  LGUI(KC_DOT),  LGUI(KC_SLSH),  _______, _______, _______,
+    _______, _______, _______, _______, _______,     LGUI(KC_SPC), _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT)
+  ),
+
+  [SYMB] = KEYMAP_JP(
+    _______,    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______,  _______,  _______,  _______,  _______,
+    _______, _______,   _______,   KC_LBRC,   KC_RBRC,   _______,   _______,   LSFT(KC_LBRC),   LSFT(KC_RBRC),   _______,  _______,_______,  _______,
+    _______, LSFT(KC_1),LSFT(KC_2),LSFT(KC_3),LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), _______, _______, _______,
+    _______, _______, _______, _______,  _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  [FUNC] = KEYMAP_JP(
+    KC_PWR,    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+    KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS,   KC_UP, _______,
+    _______, KC_VOLD, KC_VOLU, KC_MUTE,  KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT,
+    _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS,  KC_END, KC_PGDN, KC_DOWN, _______, _______, _______,
+    _______, _______, _______, _______, _______,     _______     , _______, _______, _______, _______, _______, _______, _______
+  )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md
index 39d49b32a1..367c0a08f7 100644
--- a/keyboards/hhkb/readme.md
+++ b/keyboards/hhkb/readme.md
@@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk
new file mode 100644
index 0000000000..a46271f023
--- /dev/null
+++ b/keyboards/hhkb/rules.mk
@@ -0,0 +1,80 @@
+
+
+# project specific files
+SRC = matrix.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+#OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# as per original hasu settings
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes  # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes   # Console for debug(+400)
+COMMAND_ENABLE ?= yes   # Commands for debug and configuration
+CUSTOM_MATRIX ?= yes    # Custom matrix file for the HHKB
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= yes       # MIDI controls
+# UNICODE_ENABLE ?= yes    # Unicode
+# BLUETOOTH_ENABLE ?= yes  # Enable Bluetooth with the Adafruit EZ-Key HID
+
+debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
+debug-on: all
+
+debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
+debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
+debug-off: all