Merge remote-tracking branch 'refs/remotes/jackhumbert/master'

19 files changed, 601 insertions, 96 deletions

diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile
index b00a488b91..57b2ef62e5 100644
--- a/keyboards/kc60/Makefile
+++ b/keyboards/kc60/Makefile
@@ -1,76 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
-
diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h
index c4a9b9ff82..29695d0b9d 100644
--- a/keyboards/kc60/config.h
+++ b/keyboards/kc60/config.h
@@ -62,7 +62,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_LEVELS 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h
index 34eab4b2a0..c3a0165c09 100644
--- a/keyboards/kc60/kc60.h
+++ b/keyboards/kc60/kc60.h
@@ -3,21 +3,92 @@
 
 #include "quantum.h"
 
+// K49 key is for the key at row 1 and column 15 when you split the backspace in 2 1U key.
+
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a multi-dimensional array
+/*
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K49 |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3D       | K3C |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
 #define KEYMAP( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
     ) { \
-  {  K00,  K01,  K02,  K03,    K04,    K05,  K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D  },  \
+  {  K00,  K01,  K02,  K03,    K04,    K05,  K06,    K07,    K08,    K09,  K0A,  K0B,  K0C,  K0D,  },  \
   {  K10,  K11,  K12,  K13,    K14,    K15,  K16,    K17,    K18,    K19,  K1A,  K1B,  K1C,  K1D  },  \
   {  K20,  K21,  K22,  K23,    K24,    K25,  K26,    K27,    K28,    K29,  K2A,  K2B,  K2C,  K2D  },  \
   {  K30,  K31,  K32,  K33,    K34,    K35,  K36,    K37,    K38,    K39,  K3A,  K3B,  K3C,  K3D  },  \
-  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  KC_NO,K4A,  K4B,  K4C,  K4D  }   \
+  {  K40,  K41,  K42,  KC_NO,  KC_NO,  K45,  KC_NO,  KC_NO,  KC_NO,  K49,  K4A,  K4B,  K4C,  K4D  }   \
 }
 
 #endif
+
+/* Default layout
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Lshift
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30   |K31| K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Rshift
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C         |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+/* Mini Enter
+ * ,-----------------------------------------------------------------------------------------.
+ * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D       |
+ * |-----------------------------------------------------------------------------------------+
+ * | K10    | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D    |
+ * |-----------------------------------------------------------------------------------------+
+ * | K20     | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | K2D   |
+ * |-----------------------------------------------------------------------------------------+
+ * | K30       | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C             |
+ * |-----------------------------------------------------------------------------------------+
+ * | K40   | K41   | K42   | K45                             | K4A   | K4B   | K4C   | K4D   |
+ * `-----------------------------------------------------------------------------------------'
+ */
\ No newline at end of file
diff --git a/keyboards/kc60/keymaps/dbroqua/keymap.c b/keyboards/kc60/keymaps/dbroqua/keymap.c
new file mode 100644
index 0000000000..8b5efd0cee
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua/keymap.c
@@ -0,0 +1,103 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "kc60.h"
+
+#define _QWERTY 0
+#define _FNCAPS 1
+#define _FNRIGHTSHIFT 2
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Func macro definitions.
+#define S_LED   FUNC(0)
+#define S_LEDI  FUNC(1)
+#define S_LEDD  FUNC(2)
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_BACKLIGHT_TOGGLE(),
+	[1] = ACTION_BACKLIGHT_INCREASE(),
+	[2] = ACTION_BACKLIGHT_DECREASE()
+ };
+
+/*
+ * |     |     |
+ * |       |   |
+ * |        |  |
+ * |         | |
+ * |           |
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Caps/FN1|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |     Up    | FN2 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl  | Gui   | Alt   |               Space             | AltGr | Left  | Down  | Right |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [0] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,  \
+      KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSPC,  \
+      LT(_FNCAPS, KC_CAPS),  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
+      KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  MO(_FNRIGHTSHIFT),  KC_UP,  \
+      KC_LCTL,  KC_LGUI,  KC_LALT,  KC_SPC,  KC_GRV,  KC_RALT,  KC_LEFT, KC_DOWN, KC_RIGHT \
+      ),
+
+/* Layer 1
+ * ,-----------------------------------------------------------------------------------------.
+ * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     |     |     |     |     |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     | Psc |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Led | Led+| Led-|     | Mute| Vol+| Vol-|     |     |     |    Play   |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |       |       |       |                                 |       | Prev  | Stop  | Next  |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [_FNCAPS] = KEYMAP( /* Layer 1 */
+      ______,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, KC_PSCR,______, ______, ______, ______, ______, ______,   \
+      ______,   ______,  S_LED,  S_LEDI, S_LEDD,______,KC_MUTE,KC_VOLU,KC_VOLD,______, ______, ______, ______,KC_MPLY,  \
+      ______,   ______, ______,                 ______,         KC_DEL,         ______, KC_MPRV,    KC_MSTP,    KC_MNXT \
+      ),
+
+/* Layer 2
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     |     |     |     |     |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |     |     |     |     |     |     |     |     |     |     |   PgUp    |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |       |       |       |                                 |       | Home  | PgDown| End   |
+ * `-----------------------------------------------------------------------------------------'
+ */
+  [_FNRIGHTSHIFT] = KEYMAP( /* Layer 2 */
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,   \
+      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PGUP,  \
+      ______,   ______, ______,                 ______,         ______,                 ______, KC_HOME,KC_PGDN,KC_END \
+      ),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  return MACRO_NONE;
+};
diff --git a/keyboards/kc60/keymaps/dbroqua/readme.md b/keyboards/kc60/keymaps/dbroqua/readme.md
new file mode 100644
index 0000000000..b71d10ab04
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua/readme.md
@@ -0,0 +1,11 @@
+# Dbroqua Layout
+
+* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/24fa7821d4955ec3c76037c8e159a199
+* Online keyboard layout editor (caps layer): http://www.keyboard-layout-editor.com/#/gists/4136d4d1555d6f0d9403c21aaf50fd37
+* Online keyboard layout editor (fn2 layer): http://www.keyboard-layout-editor.com/#/gists/cf4955f73f339020dbb41c15364e7e4f
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua make dfu
+```
\ No newline at end of file
diff --git a/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c
new file mode 100644
index 0000000000..5d7c7f38a3
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c
@@ -0,0 +1,73 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "kc60.h"
+
+#define _QWERTY 0
+#define _FN 1
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Func macro definitions.
+#define S_LED   FUNC(0)
+#define S_LEDI  FUNC(1)
+#define S_LEDD  FUNC(2)
+
+// Enable these functions using FUNC(n) macro.
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_BACKLIGHT_TOGGLE(),
+	[1] = ACTION_BACKLIGHT_INCREASE(),
+	[2] = ACTION_BACKLIGHT_DECREASE()
+ };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *         | LGUI  | LAlt  |               Space             | RAlt  | RGUI  |
+ *         `-----------------------------------------------------------------'
+ */
+  [0] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,  \
+      KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSPC,  \
+      KC_LCTL,  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
+      KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  MO(_FN),  KC_RSFT,  \
+      ______,  KC_LGUI,  KC_LALT,  KC_SPC,  KC_GRV,  KC_RALT,  KC_RGUI, ______, ______ \
+      ),
+
+/* Layer 1
+ * ,-----------------------------------------------------------------------------------------.
+ * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | Led | Led-| Led+|     |     |     |     | Psc | Slck| Paus| Up  |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 | Stop  |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_FN] = KEYMAP( /* Layer 1 */
+      ______,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS,  \
+      ______,   S_LED, S_LEDI, S_LEDD, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______,  \
+      ______,   KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, ______,   \
+      ______,   ______,  KC_MPRV,  KC_MPLY, KC_MNXT,______,______,KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______,______,  \
+      ______,   ______, ______,                 ______,         KC_DEL,         KC_MSTP, ______,    ______,    ______ \
+      )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  return MACRO_NONE;
+};
diff --git a/keyboards/kc60/keymaps/dbroqua_hhkb/readme.md b/keyboards/kc60/keymaps/dbroqua_hhkb/readme.md
new file mode 100644
index 0000000000..be99a3bc7e
--- /dev/null
+++ b/keyboards/kc60/keymaps/dbroqua_hhkb/readme.md
@@ -0,0 +1,9 @@
+# Dbroqua HHKB like Layout
+
+Like the HHKB but with a KC60 PCB :D.
+
+# Programming Instructions:
+Enter into programming mode and run the following command.
+```
+$ sudo KEYMAP=dbroqua_hhkb make dfu
+```
\ No newline at end of file
diff --git a/keyboards/kc60/keymaps/default/keymap.c b/keyboards/kc60/keymaps/default/keymap.c
index 6f8352c695..293ff3ab46 100644
--- a/keyboards/kc60/keymaps/default/keymap.c
+++ b/keyboards/kc60/keymaps/default/keymap.c
@@ -9,7 +9,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       KC_CAPS,  KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                       KC_RGUI,  KC_RALT,  KC_RCTL,  RESET \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                             KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  RESET \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c
index 99e95c2326..3192b25142 100644
--- a/keyboards/kc60/keymaps/sgoodwin/keymap.c
+++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c
@@ -13,21 +13,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_F,    KC_P,     KC_G,     KC_J,     KC_L,  KC_U,  KC_Y,     KC_SCLN,  KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       MO(2),    KC_A,     KC_R,     KC_S,    KC_T,     KC_D,     KC_H,     KC_N,  KC_E,  KC_I,     KC_O,     KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_K,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                     KC_RGUI,  KC_RALT,  KC_RCTL,  DF(1)  \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                           KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  DF(1)  \
       ),
   [1] = KEYMAP( /* Basic QWERTY */
       KC_ESC,   KC_1,     KC_2,     KC_3,    KC_4,     KC_5,     KC_6,     KC_7,    KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  \
       KC_TAB,   KC_Q,     KC_W,     KC_E,    KC_R,     KC_T,     KC_Y,     KC_U,    KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  \
       MO(2),    KC_A,     KC_S,     KC_D,    KC_F,     KC_G,     KC_H,     KC_J,    KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,   \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,    KC_C,     KC_V,     KC_B,     KC_N,    KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,  \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                                       KC_RGUI,  KC_RALT,  KC_RCTL,  DF(0) \
+      KC_LCTL,  KC_LALT,  KC_LGUI,                     KC_SPC,                             KC_NO,    KC_RGUI,  KC_RALT,  KC_RCTL,  DF(0) \
       ),
   [2] = KEYMAP( /* KBP v60-like arrows, media keys, etc */
       KC_GRV,   KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,  KC_DEL,   \
       KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_UP,    BL_INC,    BL_DEC,  BL_STEP,  \
       KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  KC_NO,   KC_TRNS,  \
       KC_TRNS,  KC_NO,    KC_MPRV,  KC_MPLY,   KC_MNXT,  KC_VOLD,  KC_VOLU,  KC_MUTE,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_NO,   KC_TRNS,  \
-      KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_SPC,                                           DEBUG,    RESET,     KC_TRNS, KC_NO     \
+      KC_TRNS,  KC_TRNS,  KC_TRNS,                       KC_SPC,                                 KC_NO,    DEBUG,    RESET,     KC_TRNS, KC_NO     \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c
index 057c73bf4d..212fa88bd0 100644
--- a/keyboards/kc60/keymaps/stanleylai/keymap.c
+++ b/keyboards/kc60/keymaps/stanleylai/keymap.c
@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,           KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC,  KC_BSLS, \
   LT(_FL, KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,  KC_NO,    KC_ENT,  \
   KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  MO(_FL),  KC_UP,   \
-  KC_LCTL, KC_LALT, KC_LGUI,                KC_SPC,                                 KC_RGUI,KC_LEFT,  KC_DOWN,  KC_RGHT),
+  KC_LCTL, KC_LALT, KC_LGUI,                KC_SPC,                         KC_NO,  KC_RGUI,KC_LEFT,  KC_DOWN,  KC_RGHT),
 
 // Function layer
 [_FL] = KEYMAP(
@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_NO,  KC_MPRV,KC_UP,  KC_MNXT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_PSCR,KC_SLCK,  KC_PAUS,  KC_INS, \
   KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  KC_MUTE,KC_VOLD,KC_VOLU,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_TRNS,  LT(_RGBL, KC_PGUP),\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_MPLY,                                KC_TRNS,KC_HOME,  KC_PGDN,  KC_END),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_MPLY,                        KC_NO,  KC_TRNS,KC_HOME,  KC_PGDN,  KC_END),
 
 // RGB Layer
 [_RGBL] = KEYMAP(
@@ -39,13 +39,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG,  KC_TRNS,  KC_TRNS,\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                                KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_NO,  KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
   #else
   RESET,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO, \
   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,    KC_NO,    KC_NO,  \
   KC_TRNS,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  BL_STEP,BL_TOGG,  KC_TRNS,  KC_TRNS,\
-  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                                KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
+  KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_NO,  KC_TRNS,KC_TRNS,  KC_TRNS,  KC_TRNS),
   #endif
 };
 
diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c
index 50b1d0f981..dca2826eb1 100644
--- a/keyboards/kc60/keymaps/wigguno/keymap.c
+++ b/keyboards/kc60/keymaps/wigguno/keymap.c
@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,   \
       KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_NO,    KC_ENT,    \
       KC_LSFT,  KC_NO,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_NO,    KC_RSFT,   \
-      KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,                                           KC_RALT,  MO(1),    KC_RGUI,  KC_RCTL    \
+      KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,                                 KC_NO,    KC_RALT,  MO(1),    KC_RGUI,  KC_RCTL    \
       ),
 	  	
    /*
@@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSCR,  KC_TRNS,  KC_TRNS,  KC_TRNS,   \
       KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  BL_DEC,   BL_INC,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   \
       KC_TRNS,  KC_TRNS,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_HOME,  KC_END,   KC_TRNS,  KC_TRNS,  KC_TRNS,   \
-      RESET,    KC_TRNS,  KC_TRNS,                      BL_TOGG,                                          KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS    \
+      RESET,    KC_TRNS,  KC_TRNS,                      BL_TOGG,                                KC_NO,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS    \
       ),
 };
 
diff --git a/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png
new file mode 100644
index 0000000000..cc6a630a59
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png
diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c
new file mode 100644
index 0000000000..9e3b9bb656
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/keymap.c
@@ -0,0 +1,183 @@
+#include "kc60.h"
+
+#define _WM 0
+#define _QW 1
+#define _DK 2
+#define _FUN 3
+#define _MS 4
+
+#define _______ KC_NO
+#define XXXXXXX KC_TRNS
+
+#define _DK_ACT 0
+#define _DK_REL 1
+#define _KC_COMS 2
+#define _KC_CENT 3
+
+#define DK_ACT  M(_DK_ACT)       // activate dead key layer
+#define DK_REL  M(_DK_REL)       // release dead key layer
+#define KC_COMS M(_KC_COMS)      // comma + space
+#define KC_CENT M(_KC_CENT)      // comma + enter
+#define KC_TABM LT(_MS, KC_TAB)  // press for tab, hold for mouse layer
+#define KC_SPFN LT(_FUN, KC_SPC) // press for space, hold for function layer (aka spacefn)
+#define KC_DFQW DF(_QW)          // set default layer to qwerty
+#define KC_DFWM DF(_WM)          // set default layer to workman
+#define KC_CMDQ LGUI(KC_Q)       // command + q
+#define KC_CMDD LGUI(KC_D)       // command + d
+#define KC_CMDA LGUI(KC_A)       // command + a
+#define KC_CMDS LGUI(KC_S)       // command + s
+#define KC_CMDZ LGUI(KC_Z)       // command + z
+#define KC_CMDX LGUI(KC_X)       // command + x
+#define KC_CMDC LGUI(KC_C)       // command + c
+#define KC_CMDV LGUI(KC_V)       // command + v
+#define KC_CSTB S(RCTL(KC_TAB))  // shift + control + tab
+#define KC_C_TB RCTL(KC_TAB)     // control + tab
+#define KC_C_LF RCTL(KC_LEFT)    // control + left
+#define KC_C_RT RCTL(KC_RGHT)    // control + right
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Workman
+/*
+* ,-----------------------------------------------------------.
+* |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Bsp   |
+* |-----------------------------------------------------------|
+* |Tab/M|  Q|  D|  R|  W|  B|  J|  F|  U|  P|  ;|  [|  ]|  \  |
+* |-----------------------------------------------------------|
+* |Ctrl  |  A|  S|  H|  T|  G|  Y|  N|  E|  O|  I|  '| Return |
+* |-----------------------------------------------------------|
+* |Shift   |  Z|  X|  M|  C|  V|  K|  L|  ,|  .|  /| Shift    |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |  Space/FN   | Alt | GUI | Ctrl | qwerty |
+* `-----------------------------------------------------------'
+*/
+[_WM] = KEYMAP( /* Workman */
+  KC_ESC,           KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TABM,          KC_Q,    KC_D,    KC_R,    KC_W,    KC_B,    KC_J,    KC_F,    KC_U,    KC_P,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_LCTL,          KC_A,    KC_S,    KC_H,    KC_T,    KC_G,    KC_Y,    KC_N,    KC_E,    KC_O,    KC_I,    KC_QUOT, _______, KC_ENT,  \
+  KC_LSFT, _______, KC_Z,    KC_X,    KC_M,    KC_C,    KC_V,    KC_K,    KC_L,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW),
+
+// QWERTY
+/*
+* ,-----------------------------------------------------------.
+* |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Bsp   |
+* |-----------------------------------------------------------|
+* |Tab/M|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+* |-----------------------------------------------------------|
+* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+* |-----------------------------------------------------------|
+* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Shift    |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |  Space/FN  | Alt | GUI | Ctrl | workman |
+* `-----------------------------------------------------------'
+*/
+[_QW] = KEYMAP( /* QWERTY */
+  KC_ESC,           KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+  KC_TABM,          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, _______, KC_ENT,  \
+  KC_LSFT, _______, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    DK_ACT,  KC_DOT,  KC_SLSH,          _______, KC_RSFT, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPFN,          _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFWM),
+
+// dead key layer
+/*
+* ,-----------------------------------------------------------.
+* |    |  |   |   |   |   |   |   |   |   |   |   |   | Bsp   |
+* |-----------------------------------------------------------|
+* |     |  %|  &|  ?|  +|  @|  $|  _|  [|  ]|  !|   ~|  ^|    |
+* |-----------------------------------------------------------|
+* |      |  #|  (|  =|  0|  {|  }|  1|  *|  )|  -|  `| Return |
+* |-----------------------------------------------------------|
+* |        |  6|  7|  8|  9|  ||  \|  2|  3|  4|  5|          |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |       ,       | Alt | GUI | Ctrl |      |
+* `-----------------------------------------------------------'
+*/
+[_DK] = KEYMAP( /* dead key layer */
+  XXXXXXX,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \
+  XXXXXXX,          KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT,   KC_DLR,  KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \
+  _______,          KC_HASH, KC_LPRN, KC_EQL,  KC_0,    KC_LCBR, KC_RCBR, KC_1,    KC_ASTR, KC_RPRN, KC_MINS, KC_GRV,  _______, KC_CENT, \
+  _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_PIPE, KC_BSLS, KC_2,    DK_REL,  KC_4,    KC_5,             _______, _______, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_COMS,          _______, KC_RALT, KC_RGUI, KC_RCTL, _______),
+
+// function layer
+/*
+* ,-----------------------------------------------------------.
+* |   | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|Del |
+* |-----------------------------------------------------------|
+* |Esc  | Cq| Cd|cstb|ctb|   |   |pgd| up|pgu|   |   |   |ins |
+* |-----------------------------------------------------------|
+* |Shift | Ca| Cs|clt|crt|   |   | lt| dw| rt|home|end| Bsp   |
+* |-----------------------------------------------------------|
+* |Shift  | Cz|  Cx|   | Cc| Cv| V-| V+|mute|   |   |         |
+* |-----------------------------------------------------------|
+* |Ctrl | Alt | GUI |              | Alt | GUI | Ctrl | Reset |
+* `-----------------------------------------------------------'
+*/
+[_FUN] = KEYMAP( /* function layer */
+  KC_TRNS,          KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+  KC_ESC,           KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP,   KC_PGUP, _______, _______, _______, KC_INS,  \
+  KC_LSFT,          KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END,  _______, KC_BSPC, \
+  KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______,          _______, _______, \
+  KC_LCTL, KC_LALT, KC_LGUI,                   KC_TRNS,          _______, KC_RALT, KC_RGUI, KC_RCTL, RESET),
+
+// mouse layer
+/*
+* ,-----------------------------------------------------------.
+* |    |  |   |   |   |   |   |   |   |   |   |   |   |       |
+* |-----------------------------------------------------------|
+* |    |fast|med|slow|   |   |   |   | up|   |   |   |   |    |
+* |-----------------------------------------------------------|
+* |      |   |   |   |   |   |   | lt| dw| rt| rc|   |        |
+* |-----------------------------------------------------------|
+* |        |   |   |   |   |   |   |   |   |   |   |          |
+* |-----------------------------------------------------------|
+* |     |     |     |      lc       |     |     |      |      |
+* `-----------------------------------------------------------'
+*/
+[_MS] = KEYMAP( /* mouse layer */
+  XXXXXXX,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  XXXXXXX,          KC_ACL2, KC_ACL1, KC_ACL0, _______, _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, \
+  _______,          _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN2, _______, _______, _______, \
+  _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______,                   KC_BTN1,          _______, _______, _______, _______, _______),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    case _KC_COMS:
+      if (record->event.pressed) {
+        return MACRO(T(COMM), T(SPC), END); // comma + space
+      }
+      break;
+    case _KC_CENT:
+      if (record->event.pressed) {
+        return MACRO(T(COMM), T(ENT), END); // comma + enter
+      }
+      break;
+    case _DK_ACT:
+      if (record->event.pressed) {
+        if (keyboard_report->mods & MOD_BIT(KC_LSFT) || keyboard_report->mods & MOD_BIT(KC_RSFT)) { // act as comma when shift is pressed (eg <)
+          register_code(KC_COMM);
+        } else { // activate oneshot dead key layer otherwise
+          layer_on(_DK);
+          set_oneshot_layer(_DK, ONESHOT_START);
+        }
+      } else { // make sure to deactive dead key layer on key release
+        clear_oneshot_layer_state(ONESHOT_PRESSED);
+        unregister_code(KC_COMM);
+      }
+      break;
+    case _DK_REL:
+      if (record->event.pressed) { // act as 3 on keypress
+        register_code(KC_3);
+      } else { // make sure to deactive dead key layer on key release
+        clear_oneshot_layer_state(ONESHOT_PRESSED);
+        unregister_code(KC_3);
+      }
+      break;
+  }
+
+  return MACRO_NONE;
+};
diff --git a/keyboards/kc60/keymaps/workman-dead/readme.md b/keyboards/kc60/keymaps/workman-dead/readme.md
new file mode 100644
index 0000000000..f1fcdc9606
--- /dev/null
+++ b/keyboards/kc60/keymaps/workman-dead/readme.md
@@ -0,0 +1,17 @@
+# Workman dead with spacefn (kc60 @ QMK)
+
+## Layout reference
+![workman dead with spacefn](./kc60-wm-dead.png)
+
+## Build
+
+To build this keymap, simply run `make KEYMAP=workman-dead`.
+
+## Notes
+
+* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though)
+* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference)
+* hold `space` to access the `function` layer (marked blue in the reference)
+* hold `tab` to activate the mouse layer
+* the `function` layer contains mostly osx specific shortcuts
+* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout
diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h
index 2f39ea8e55..43abf6228e 100644
--- a/keyboards/kc60/keymaps/ws2812/config.h
+++ b/keyboards/kc60/keymaps/ws2812/config.h
@@ -2,7 +2,7 @@
 
 /* WS2812B RGB Underglow LED */
 #define RGB_DI_PIN F5   // Based on wiring depicted in ws2812_wiring.jpg
-#define RGBLIGHT_TIMER       
+#define RGBLIGHT_ANIMATIONS       
 #define RGBLED_NUM 16         // Number of LEDs. Change this to match your use case.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c
index 1c0574df09..ae11ebf91c 100644
--- a/keyboards/kc60/keymaps/ws2812/keymap.c
+++ b/keyboards/kc60/keymaps/ws2812/keymap.c
@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC, KC_BSLS, \
   KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,  KC_NO,   KC_ENT,  \
   KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_NO,   KC_RSFT, \
-  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, MO(_FL), KC_RCTL),
+  KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                         KC_NO,  KC_RALT,KC_RGUI, MO(_FL), KC_RCTL),
 
   /* Keymap _FL: Function Layer
    * ,-----------------------------------------------------------.
@@ -53,13 +53,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, RESET),
   #else
   KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
   KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_INC,  BL_TOGG, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
-  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, RESET),
+  KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, RESET),
   #endif
 };
 
diff --git a/keyboards/kc60/led.c b/keyboards/kc60/led.c
new file mode 100644
index 0000000000..50659d7247
--- /dev/null
+++ b/keyboards/kc60/led.c
@@ -0,0 +1,31 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
+}
\ No newline at end of file
diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md
index acc0df68dc..da84f6159a 100644
--- a/keyboards/kc60/readme.md
+++ b/keyboards/kc60/readme.md
@@ -10,18 +10,27 @@ Download or clone the whole firmware and navigate to the keyboards/kc60 folder.
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
 
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
 ```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
 ```
+
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
 
 ## WS2812 Support
 ![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg)
 
-Build with WS2812 Support by running `make KEYMAP=ws2812`.
+Build with WS2812 Support by running `make ws2812`.
+
+## Warning
+For those who want to use 2x1U instead of classic backspace you need to use K0D and K49 like this:
+* K0D represents the key at the right of =.
+* K49 represents the last key of the row (is wired at the right of the space key on the PCB)
+
+In kc60.h I've put several definitions' examples of possible layouts proposed by online editor (http://123.57.250.164:9128/).
diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk
new file mode 100644
index 0000000000..a935ed19ee
--- /dev/null
+++ b/keyboards/kc60/rules.mk
@@ -0,0 +1,71 @@
+# project specific files
+SRC = led.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6