kinesis remap

1 files changed, 6 insertions, 36 deletions

diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md
index 79c86581e6..2813ee273b 100644
--- a/keyboards/kinesis/readme.md
+++ b/keyboards/kinesis/readme.md
@@ -1,42 +1,12 @@
-kinesis-advantage keyboard firmware
-======================
+# Firmware for the Kinesis advantage keyboard
 
-## Kinesis specific information
-This is a port of https://github.com/alvicstep/tmk_keyboard, 
-which is a fork of https://github.com/wjanssens/tmk_keyboard, 
-which is based on work from https://github.com/chrisandreae/keyboard-firmware
+There are at least two different ways to replace the controller in this keyboard.
 
-If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. 
-I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. 
+The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg.
 
-Not yet implemented: 
-- Kinesis EEProm reading or writing
-- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7
+The alvicstep folder contains docs and configuration for directly wiring a  Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from. 
 
+## Keymaps
+Both hardware solutions should work with the same keymaps
 
 
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
-
-## Building
-
-Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`