RESET -> QK_BOOT keyboard readme (#18110)

9 files changed, 9 insertions, 9 deletions

diff --git a/keyboards/mechlovin/foundation/readme.md b/keyboards/mechlovin/foundation/readme.md
index 4a998da039..61dacd55bd 100644
--- a/keyboards/mechlovin/foundation/readme.md
+++ b/keyboards/mechlovin/foundation/readme.md
@@ -22,5 +22,5 @@ Enter the bootloader in 4 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 * **Hardware reset**: Press reset button (located on the bottom side of the PCB) 
\ No newline at end of file
diff --git a/keyboards/mechlovin/hex4b/rev2/readme.md b/keyboards/mechlovin/hex4b/rev2/readme.md
index 328c869704..01ae8ea724 100644
--- a/keyboards/mechlovin/hex4b/rev2/readme.md
+++ b/keyboards/mechlovin/hex4b/rev2/readme.md
@@ -24,5 +24,5 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 * **Hardware reset**: Press reset button (located on the top side of the PCB)
\ No newline at end of file
diff --git a/keyboards/mechlovin/infinity875/readme.md b/keyboards/mechlovin/infinity875/readme.md
index b3e14a7bb7..39c76e5dc9 100644
--- a/keyboards/mechlovin/infinity875/readme.md
+++ b/keyboards/mechlovin/infinity875/readme.md
@@ -19,6 +19,6 @@ Flashing example for this keyboard:
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 **Reset Key:** 3 ways to put the IF87.5 into bootloader:
-- By keycode: Tap RESET keycode.
+- By keycode: Press the key mapped to `QK_BOOT` if it is available.
 - By bootmagic: hold ESC key while plugging in.
 - By hardware: Push reset button on bottom of the PCB while the PCB is plugged in.
\ No newline at end of file
diff --git a/keyboards/mechlovin/jay60/readme.md b/keyboards/mechlovin/jay60/readme.md
index 79867e5503..81f5ae6ed7 100644
--- a/keyboards/mechlovin/jay60/readme.md
+++ b/keyboards/mechlovin/jay60/readme.md
@@ -23,4 +23,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/mechlovin/kay60/readme.md b/keyboards/mechlovin/kay60/readme.md
index cc53c13175..16c8414b34 100644
--- a/keyboards/mechlovin/kay60/readme.md
+++ b/keyboards/mechlovin/kay60/readme.md
@@ -22,5 +22,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 * **Physic button**: Press reset swith on the bottom of the PCB
diff --git a/keyboards/mechlovin/kay65/readme.md b/keyboards/mechlovin/kay65/readme.md
index 768ce12aa7..d15317710f 100644
--- a/keyboards/mechlovin/kay65/readme.md
+++ b/keyboards/mechlovin/kay65/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/mechlovin/olly/bb/readme.md b/keyboards/mechlovin/olly/bb/readme.md
index 0e41a3072f..6afdc161ea 100644
--- a/keyboards/mechlovin/olly/bb/readme.md
+++ b/keyboards/mechlovin/olly/bb/readme.md
@@ -19,5 +19,5 @@ Flashing example for this keyboard:
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 **Reset Key:** 2 ways to put the Olly JF into bootloader:
-By keycode: Tap RESET keycode.
+By keycode: Press the key mapped to `QK_BOOT` if it is available.
 By bootloader: hold ESC key while plugging in
\ No newline at end of file
diff --git a/keyboards/mechlovin/olly/jf/readme.md b/keyboards/mechlovin/olly/jf/readme.md
index 6a6bbc415a..fe9cf38cad 100644
--- a/keyboards/mechlovin/olly/jf/readme.md
+++ b/keyboards/mechlovin/olly/jf/readme.md
@@ -19,6 +19,6 @@ Flashing example for this keyboard:
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 **Reset Key:** 3 ways to put the Olly JF into bootloader:
-By keycode: Tap RESET keycode.
+By keycode: Press the key mapped to `QK_BOOT` if it is available.
 By Bootloader: hold ESC key while plugging in (jump to bootloader)
 By Bootmagic: hold Insert key while pluging in (jump to bootloader and reset EEPROM)
\ No newline at end of file
diff --git a/keyboards/mechlovin/zed60/readme.md b/keyboards/mechlovin/zed60/readme.md
index f740a421a8..d2e76ff55c 100644
--- a/keyboards/mechlovin/zed60/readme.md
+++ b/keyboards/mechlovin/zed60/readme.md
@@ -21,7 +21,7 @@ Enter the bootloader in 4 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 * **Bootloader**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard 
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).