[Keyboard] move @nacly 's boards to nacly/ (#15801)

7 files changed, 288 insertions, 0 deletions

diff --git a/keyboards/nacly/ua62/config.h b/keyboards/nacly/ua62/config.h
new file mode 100644
index 0000000000..492bba93e8
--- /dev/null
+++ b/keyboards/nacly/ua62/config.h
@@ -0,0 +1,145 @@
+/*
+Copyright 2019 NaCly
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xBEEF
+#define PRODUCT_ID 0xFFFF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER NaCly
+#define PRODUCT UA62
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define TAPPING_TERM 200
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/nacly/ua62/info.json b/keyboards/nacly/ua62/info.json
new file mode 100644
index 0000000000..4090b43d11
--- /dev/null
+++ b/keyboards/nacly/ua62/info.json
@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "ua62",
+    "url": "",
+    "maintainer": "qmk",
+    "layouts": {
+      "LAYOUT": {
+        "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.6}, {"x":2, "y":0.35}, {"x":3, "y":0}, {"x":4, "y":0.35}, {"x":5, "y":0.7}, {"x":9, "y":0.7}, {"x":10, "y":0.35}, {"x":11, "y":0}, {"x":12, "y":0.35}, {"x":13, "y":0.6}, {"x":14, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.6}, {"x":2, "y":1.35}, {"x":3, "y":1}, {"x":4, "y":1.35}, {"x":5, "y":1.7}, {"x":9, "y":1.7}, {"x":10, "y":1.35}, {"x":11, "y":1}, {"x":12, "y":1.35}, {"x":13, "y":1.6}, {"x":14, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.6}, {"x":2, "y":2.35}, {"x":3, "y":2}, {"x":4, "y":2.35}, {"x":5, "y":2.7}, {"x":9, "y":2.7}, {"x":10, "y":2.35}, {"x":11, "y":2}, {"x":12, "y":2.35}, {"x":13, "y":2.6}, {"x":14, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.6}, {"x":2, "y":3.35}, {"x":3, "y":3}, {"x":4, "y":3.35}, {"x":5, "y":3.7}, {"x":9, "y":3.7}, {"x":10, "y":3.35}, {"x":11, "y":3}, {"x":12, "y":3.35}, {"x":13, "y":3.6}, {"x":14, "y":3.6}, {"x":0, "y":4.6}, {"x":1, "y":4.6}, {"x":2, "y":4.35}, {"x":3, "y":4}, {"x":4, "y":4.35}, {"x":5, "y":4.7}, {"x":6, "y":3.95, "h":1.5}, {"x":8, "y":3.95, "h":1.5}, {"x":9, "y":4.7}, {"x":10, "y":4.35}, {"x":11, "y":4}, {"x":12, "y":4.35}, {"x":13, "y":4.6}, {"x":14, "y":4.6}]
+      }
+    }
+  }
diff --git a/keyboards/nacly/ua62/keymaps/default/keymap.c b/keyboards/nacly/ua62/keymaps/default/keymap.c
new file mode 100644
index 0000000000..5488fdfdc1
--- /dev/null
+++ b/keyboards/nacly/ua62/keymaps/default/keymap.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 NaCly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5,                          KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,                          KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
+        KC_LCTRL, KC_A, KC_S, KC_D, LT(1, KC_F), KC_G,                        KC_H, LT(2, KC_J), KC_K, KC_L, KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,                         KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
+        KC_LCTRL, KC_LGUI, KC_LALT, KC_GRV, KC_EQL, KC_BSPC, KC_DEL,      KC_ENT, KC_SPC, KC_LBRC, KC_RBRC, KC_HOME, KC_END, KC_ESC
+    ),
+    //Holding F
+    [1] = LAYOUT(
+        KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,                          KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+        KC_LCTRL, KC_NO, KC_NO, KC_NO, _______, KC_NO,                        KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO,
+        KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                         KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, 
+        KC_LCTRL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_NO, KC_NO,      KC_HOME, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+    ),
+    //Holding J
+    [2] = LAYOUT(
+        KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO,                         KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+        KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO,                         KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                      KC_NO, _______, KC_NO, KC_NO, KC_NO, KC_NO,
+        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                         KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_LCTRL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_NO, KC_NO,      KC_ENT, KC_SPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+    )
+};
+
diff --git a/keyboards/nacly/ua62/readme.md b/keyboards/nacly/ua62/readme.md
new file mode 100644
index 0000000000..cb4b870bcd
--- /dev/null
+++ b/keyboards/nacly/ua62/readme.md
@@ -0,0 +1,14 @@
+# UA62
+
+* A Universal pcb for the atreus62
+* atreus62 by profet23
+* Original atreus by Phil Hagelberg
+* Keyboard Maintainer: [NaCly](https://github.com/na-cly)  
+* Hardware Supported: UA62 PCB
+* Hardware Availability: https://github.com/na-cly/UA62 (Order PCBS)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make nacly/ua62:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/nacly/ua62/rules.mk b/keyboards/nacly/ua62/rules.mk
new file mode 100644
index 0000000000..33d28b3a89
--- /dev/null
+++ b/keyboards/nacly/ua62/rules.mk
@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/nacly/ua62/ua62.c b/keyboards/nacly/ua62/ua62.c
new file mode 100644
index 0000000000..cac45f3fbf
--- /dev/null
+++ b/keyboards/nacly/ua62/ua62.c
@@ -0,0 +1,17 @@
+/* Copyright 2019 NaCly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ua62.h"
+
diff --git a/keyboards/nacly/ua62/ua62.h b/keyboards/nacly/ua62/ua62.h
new file mode 100644
index 0000000000..4509bbff3d
--- /dev/null
+++ b/keyboards/nacly/ua62/ua62.h
@@ -0,0 +1,41 @@
+/* Copyright 2019 NaCly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10,  k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b,  \
+    k20,  k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,  \
+    k30,  k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,  \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \
+    { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \
+    { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \
+    { k30, k31, k32, k33, k34, k35,   k47, k36, k37, k38, k39, k3a, k3b }, \
+    { k40, k41, k42, k43, k44, k45,   k46, k48, k49, k4a, k4b, k4c, k4d }, \
+}