2020 February 29 Breaking Changes Update (#8064)

1 files changed, 177 insertions, 10 deletions

diff --git a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c
index 19adfb933e..754dc5c4dd 100644
--- a/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c
+++ b/keyboards/peiorisboards/ixora/boards/GENERIC_STM32_F042X6/board.c
@@ -1,9 +1,12 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
+
         http://www.apache.org/licenses/LICENSE-2.0
+
     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
@@ -11,15 +14,82 @@
     limitations under the License.
 */
 
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
 #include "hal.h"
+#include "stm32_gpio.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables.                                                */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types.                                         */
+/*===========================================================================*/
+
+/**
+ * @brief   Type of STM32 GPIO port setup.
+ */
+typedef struct {
+  uint32_t              moder;
+  uint32_t              otyper;
+  uint32_t              ospeedr;
+  uint32_t              pupdr;
+  uint32_t              odr;
+  uint32_t              afrl;
+  uint32_t              afrh;
+} gpio_setup_t;
+
+/**
+ * @brief   Type of STM32 GPIO initialization data.
+ */
+typedef struct {
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+  gpio_setup_t          PAData;
+#endif
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+  gpio_setup_t          PBData;
+#endif
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+  gpio_setup_t          PCData;
+#endif
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+  gpio_setup_t          PDData;
+#endif
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+  gpio_setup_t          PEData;
+#endif
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+  gpio_setup_t          PFData;
+#endif
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+  gpio_setup_t          PGData;
+#endif
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+  gpio_setup_t          PHData;
+#endif
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+  gpio_setup_t          PIData;
+#endif
+#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
+  gpio_setup_t          PJData;
+#endif
+#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
+  gpio_setup_t          PKData;
+#endif
+} gpio_config_t;
 
-#if HAL_USE_PAL || defined(__DOXYGEN__)
 /**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
+ * @brief   STM32 GPIO static initialization data.
  */
-const PALConfig pal_default_config = {
+static const gpio_config_t gpio_default_config = {
 #if STM32_HAS_GPIOA
   {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
    VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
@@ -54,23 +124,119 @@ const PALConfig pal_default_config = {
 #endif
 #if STM32_HAS_GPIOI
   {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
+#endif
+#if STM32_HAS_GPIOJ
+  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
+   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
+#endif
+#if STM32_HAS_GPIOK
+  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
+   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
 #endif
 };
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
+
+  gpiop->OTYPER  = config->otyper;
+  gpiop->OSPEEDR = config->ospeedr;
+  gpiop->PUPDR   = config->pupdr;
+  gpiop->ODR     = config->odr;
+  gpiop->AFRL    = config->afrl;
+  gpiop->AFRH    = config->afrh;
+  gpiop->MODER   = config->moder;
+}
+
+static void stm32_gpio_init(void) {
+
+  /* Enabling GPIO-related clocks, the mask comes from the
+     registry header file.*/
+  rccResetAHB(STM32_GPIO_EN_MASK);
+  rccEnableAHB(STM32_GPIO_EN_MASK, true);
+
+  /* Initializing all the defined GPIO ports.*/
+#if STM32_HAS_GPIOA
+  gpio_init(GPIOA, &gpio_default_config.PAData);
 #endif
+#if STM32_HAS_GPIOB
+  gpio_init(GPIOB, &gpio_default_config.PBData);
+#endif
+#if STM32_HAS_GPIOC
+  gpio_init(GPIOC, &gpio_default_config.PCData);
+#endif
+#if STM32_HAS_GPIOD
+  gpio_init(GPIOD, &gpio_default_config.PDData);
+#endif
+#if STM32_HAS_GPIOE
+  gpio_init(GPIOE, &gpio_default_config.PEData);
+#endif
+#if STM32_HAS_GPIOF
+  gpio_init(GPIOF, &gpio_default_config.PFData);
+#endif
+#if STM32_HAS_GPIOG
+  gpio_init(GPIOG, &gpio_default_config.PGData);
+#endif
+#if STM32_HAS_GPIOH
+  gpio_init(GPIOH, &gpio_default_config.PHData);
+#endif
+#if STM32_HAS_GPIOI
+  gpio_init(GPIOI, &gpio_default_config.PIData);
+#endif
+#if STM32_HAS_GPIOJ
+  gpio_init(GPIOJ, &gpio_default_config.PJData);
+#endif
+#if STM32_HAS_GPIOK
+  gpio_init(GPIOK, &gpio_default_config.PKData);
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers.                                                */
+/*===========================================================================*/
 
-void enter_bootloader_mode_if_requested(void);
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
 
 /**
  * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
+ * @details GPIO ports and system clocks are initialized before everything
+ *          else.
  */
 void __early_init(void) {
+  extern void enter_bootloader_mode_if_requested(void);
   enter_bootloader_mode_if_requested();
+
+  stm32_gpio_init();
   stm32_clock_init();
 }
 
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
 #if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
 /**
  * @brief   MMC_SPI card detection.
@@ -98,4 +264,5 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
  * @todo    Add your board-specific code, if any.
  */
 void boardInit(void) {
+
 }