Move optical sensor code to drivers folder (#13044)

1 files changed, 0 insertions, 79 deletions

diff --git a/keyboards/ploopyco/adns5050.h b/keyboards/ploopyco/adns5050.h
deleted file mode 100644
index ff8e8f78e9..0000000000
--- a/keyboards/ploopyco/adns5050.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* Copyright 2021 Colin Lam (Ploopy Corporation)
- * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
- * Copyright 2019 Sunjun Kim
- * Copyright 2019 Hiroyuki Okada
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdbool.h>
-
-// Registers
-#define REG_PRODUCT_ID 0x00
-#define REG_REVISION_ID 0x01
-#define REG_MOTION 0x02
-#define REG_DELTA_X 0x03
-#define REG_DELTA_Y 0x04
-#define REG_SQUAL 0x05
-#define REG_SHUTTER_UPPER 0x06
-#define REG_SHUTTER_LOWER 0x07
-#define REG_MAXIMUM_PIXEL 0x08
-#define REG_PIXEL_SUM 0x09
-#define REG_MINIMUM_PIXEL 0x0a
-#define REG_PIXEL_GRAB 0x0b
-#define REG_MOUSE_CONTROL 0x0d
-#define REG_MOUSE_CONTROL2 0x19
-#define REG_LED_DC_MODE 0x22
-#define REG_CHIP_RESET 0x3a
-#define REG_PRODUCT_ID2 0x3e
-#define REG_INV_REV_ID 0x3f
-#define REG_MOTION_BURST 0x63
-
-// CPI values
-#define CPI125 0x11
-#define CPI250 0x12
-#define CPI375 0x13
-#define CPI500 0x14
-#define CPI625 0x15
-#define CPI750 0x16
-#define CPI875 0x17
-#define CPI1000 0x18
-#define CPI1125 0x19
-#define CPI1250 0x1a
-#define CPI1375 0x1b
-
-#ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte);
-#endif
-
-typedef struct {
-    int8_t dx;
-    int8_t dy;
-} report_adns_t;
-
-// A bunch of functions to implement the ADNS5050-specific serial protocol.
-// Note that the "serial.h" driver is insufficient, because it does not
-// manually manipulate a serial clock signal.
-void adns_init(void);
-void adns_sync(void);
-uint8_t adns_serial_read(void);
-void adns_serial_write(uint8_t data);
-uint8_t adns_read_reg(uint8_t reg_addr);
-void adns_write_reg(uint8_t reg_addr, uint8_t data);
-report_adns_t adns_read_burst(void);
-int8_t convert_twoscomp(uint8_t data);
-void adns_set_cpi(uint8_t cpi);
-bool adns_check_signature(void);