Remove `UNUSED_PINS` (#17931)

10 files changed, 14 insertions, 14 deletions

diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h
index e74e9dee83..6a6713557b 100644
--- a/keyboards/ploopyco/mouse/config.h
+++ b/keyboards/ploopyco/mouse/config.h
@@ -41,7 +41,7 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { B4, D6, F1, F5, F6, F7 }
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
diff --git a/keyboards/ploopyco/mouse/mouse.c b/keyboards/ploopyco/mouse/mouse.c
index 25ebd1ee2d..7caba1e1bb 100644
--- a/keyboards/ploopyco/mouse/mouse.c
+++ b/keyboards/ploopyco/mouse/mouse.c
@@ -199,8 +199,8 @@ void keyboard_pre_init_kb(void) {
      * pathways to ground. If you're messing with this, know this: driving ANY
      * of these pins high will cause a short. On the MCU. Ka-blooey.
      */
-#ifdef UNUSED_PINS
-    const pin_t unused_pins[] = UNUSED_PINS;
+#ifdef UNUSABLE_PINS
+    const pin_t unused_pins[] = UNUSABLE_PINS;
 
     for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
         setPinOutput(unused_pins[i]);
diff --git a/keyboards/ploopyco/trackball/rev1/config.h b/keyboards/ploopyco/trackball/rev1/config.h
index 2908f09602..3db085baf2 100644
--- a/keyboards/ploopyco/trackball/rev1/config.h
+++ b/keyboards/ploopyco/trackball/rev1/config.h
@@ -35,7 +35,7 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { D1, D3, B4, B6, B7, D6, C7, F6, F5, F3, F7 }
 
 // If board has a debug LED, you can enable it by defining this
diff --git a/keyboards/ploopyco/trackball/rev1_005/config.h b/keyboards/ploopyco/trackball/rev1_005/config.h
index 83e70181de..321e3004d1 100644
--- a/keyboards/ploopyco/trackball/rev1_005/config.h
+++ b/keyboards/ploopyco/trackball/rev1_005/config.h
@@ -35,7 +35,7 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 }
 
 // If board has a debug LED, you can enable it by defining this
diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c
index bda21b5c88..7a576a586d 100644
--- a/keyboards/ploopyco/trackball/trackball.c
+++ b/keyboards/ploopyco/trackball/trackball.c
@@ -204,8 +204,8 @@ void keyboard_pre_init_kb(void) {
      * pathways to ground. If you're messing with this, know this: driving ANY
      * of these pins high will cause a short. On the MCU. Ka-blooey.
      */
-#ifdef UNUSED_PINS
-    const pin_t unused_pins[] = UNUSED_PINS;
+#ifdef UNUSABLE_PINS
+    const pin_t unused_pins[] = UNUSABLE_PINS;
 
     for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
         setPinOutput(unused_pins[i]);
diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/config.h b/keyboards/ploopyco/trackball_mini/rev1_001/config.h
index 06720b8fdf..d4c9d23bec 100644
--- a/keyboards/ploopyco/trackball_mini/rev1_001/config.h
+++ b/keyboards/ploopyco/trackball_mini/rev1_001/config.h
@@ -36,5 +36,5 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { B5, C7, D0, D1, D3, D5, D6, F1, F3, F5, F6, F7 }
diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/config.h b/keyboards/ploopyco/trackball_mini/rev1_002/config.h
index 06720b8fdf..d4c9d23bec 100644
--- a/keyboards/ploopyco/trackball_mini/rev1_002/config.h
+++ b/keyboards/ploopyco/trackball_mini/rev1_002/config.h
@@ -36,5 +36,5 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { B5, C7, D0, D1, D3, D5, D6, F1, F3, F5, F6, F7 }
diff --git a/keyboards/ploopyco/trackball_mini/trackball_mini.c b/keyboards/ploopyco/trackball_mini/trackball_mini.c
index e4b4a47c2b..03cba2200e 100644
--- a/keyboards/ploopyco/trackball_mini/trackball_mini.c
+++ b/keyboards/ploopyco/trackball_mini/trackball_mini.c
@@ -200,8 +200,8 @@ void keyboard_pre_init_kb(void) {
      * pathways to ground. If you're messing with this, know this: driving ANY
      * of these pins high will cause a short. On the MCU. Ka-blooey.
      */
-#ifdef UNUSED_PINS
-    const pin_t unused_pins[] = UNUSED_PINS;
+#ifdef UNUSABLE_PINS
+    const pin_t unused_pins[] = UNUSABLE_PINS;
 
     for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
         setPinOutput(unused_pins[i]);
diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/config.h b/keyboards/ploopyco/trackball_nano/rev1_001/config.h
index 6d265d7233..3bde88487a 100644
--- a/keyboards/ploopyco/trackball_nano/rev1_001/config.h
+++ b/keyboards/ploopyco/trackball_nano/rev1_001/config.h
@@ -33,5 +33,5 @@
 
 // These pins are not broken out, and cannot be used normally.
 // They are set as output and pulled high, by default
-#define UNUSED_PINS \
+#define UNUSABLE_PINS \
     { B5, B6, C7, D0, D1, D2, D3, D4, D5, D6, D7, E6, F1, F3, F5, F6, F7 }
diff --git a/keyboards/ploopyco/trackball_nano/trackball_nano.c b/keyboards/ploopyco/trackball_nano/trackball_nano.c
index 0f2fbe2f72..eb1d8e10b0 100644
--- a/keyboards/ploopyco/trackball_nano/trackball_nano.c
+++ b/keyboards/ploopyco/trackball_nano/trackball_nano.c
@@ -86,8 +86,8 @@ void keyboard_pre_init_kb(void) {
      * pathways to ground. If you're messing with this, know this: driving ANY
      * of these pins high will cause a short. On the MCU. Ka-blooey.
      */
-#ifdef UNUSED_PINS
-    const pin_t unused_pins[] = UNUSED_PINS;
+#ifdef UNUSABLE_PINS
+    const pin_t unused_pins[] = UNUSABLE_PINS;
 
     for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) {
         setPinOutput(unused_pins[i]);