[Keyboard] Add pluto12 (#15369)

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

8 files changed, 258 insertions, 0 deletions

diff --git a/keyboards/psuieee/pluto12/config.h b/keyboards/psuieee/pluto12/config.h
new file mode 100644
index 0000000000..60d3f0a501
--- /dev/null
+++ b/keyboards/psuieee/pluto12/config.h
@@ -0,0 +1,138 @@
+// Copyright 2021 Willem McGloughlin (wymcg)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4747
+#define PRODUCT_ID   0x7012
+#define DEVICE_VER   0x0001
+#define MANUFACTURER psuieee
+#define PRODUCT      pluto12
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/psuieee/pluto12/info.json b/keyboards/psuieee/pluto12/info.json
new file mode 100644
index 0000000000..a48b687fb1
--- /dev/null
+++ b/keyboards/psuieee/pluto12/info.json
@@ -0,0 +1,23 @@
+{
+    "keyboard_name": "pluto12",
+    "url": "https://github.com/psuieee/pluto12",
+    "maintainer": "wymcg",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "M1", "x": 0, "y": 0 },
+                { "label": "M2", "x": 1, "y": 0 },
+                { "label": "M3", "x": 2, "y": 0 },
+                { "label": "M4", "x": 3, "y": 0 },
+                { "label": "M5", "x": 0, "y": 1 },
+                { "label": "M6", "x": 1, "y": 1 },
+                { "label": "M7", "x": 2, "y": 1 },
+                { "label": "M8", "x": 3, "y": 1 },
+                { "label": "M9", "x": 0, "y": 2 },
+                { "label": "M10", "x": 1, "y": 2 },
+                { "label": "M11", "x": 2, "y": 2 },
+                { "label": "M12", "x": 3, "y": 2 }
+            ]
+        }
+    }
+}
diff --git a/keyboards/psuieee/pluto12/keymaps/default/keymap.c b/keyboards/psuieee/pluto12/keymaps/default/keymap.c
new file mode 100644
index 0000000000..1c09c4fc83
--- /dev/null
+++ b/keyboards/psuieee/pluto12/keymaps/default/keymap.c
@@ -0,0 +1,23 @@
+// Copyright 2021 Will McGLoughlin (wymcg)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        KC_PGUP,   KC_MUTE,   KC_VOLD,   KC_VOLU,
+        KC_PGDN,   KC_MPLY,   KC_MPRV,   KC_MNXT,
+        KC_NO,     KC_HOME,   KC_END,    OSL(_FN)
+    ),
+    [_FN] = LAYOUT(
+        KC_F1,     KC_F2,     KC_F3,     KC_F4,
+        KC_F5,     KC_F6,     KC_F7,     KC_F8,
+        KC_F9,     KC_F10,    KC_F11,    KC_F12
+    )
+};
diff --git a/keyboards/psuieee/pluto12/keymaps/default/readme.md b/keyboards/psuieee/pluto12/keymaps/default/readme.md
new file mode 100644
index 0000000000..8416c0fe61
--- /dev/null
+++ b/keyboards/psuieee/pluto12/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for pluto12
diff --git a/keyboards/psuieee/pluto12/pluto12.c b/keyboards/psuieee/pluto12/pluto12.c
new file mode 100644
index 0000000000..c08911493c
--- /dev/null
+++ b/keyboards/psuieee/pluto12/pluto12.c
@@ -0,0 +1,4 @@
+// Copyright 2021 Will McGloughlin (@wymcg)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "pluto12.h"
diff --git a/keyboards/psuieee/pluto12/pluto12.h b/keyboards/psuieee/pluto12/pluto12.h
new file mode 100644
index 0000000000..7a01de10f7
--- /dev/null
+++ b/keyboards/psuieee/pluto12/pluto12.h
@@ -0,0 +1,24 @@
+// Copyright 2021 Will McGloughlin (@wymcg)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23 \
+) { \
+    {K00, K01, K02, K03}, \
+    {K10, K11, K12, K13}, \
+    {K20, K21, K22, K23} \
+}
diff --git a/keyboards/psuieee/pluto12/readme.md b/keyboards/psuieee/pluto12/readme.md
new file mode 100644
index 0000000000..bfdafb3b2d
--- /dev/null
+++ b/keyboards/psuieee/pluto12/readme.md
@@ -0,0 +1,27 @@
+# pluto12
+
+![pluto12](https://i.imgur.com/XYtwexoh.jpg)
+
+The pluto12 is a 4x3 macropad designed for use in the Penn State IEEE Student Chapter's [2021-22 workshop series](https://github.com/psuieee/projects2021). Designed by the 2021-22 Penn State IEEE Projects Committee.
+
+* Keyboard Maintainer: [Will McGloughlin](https://github.com/wymcg)
+* Hardware Supported: Pro Micro and derivatives
+* Hardware Availability: [PCB and case files](https://github.com/psuieee/pluto12)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make psuieee/pluto12:default
+
+Flashing example for this keyboard:
+
+    make psuieee/pluto12:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead.
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
diff --git a/keyboards/psuieee/pluto12/rules.mk b/keyboards/psuieee/pluto12/rules.mk
new file mode 100644
index 0000000000..515ca5621f
--- /dev/null
+++ b/keyboards/psuieee/pluto12/rules.mk
@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output