Keymaps for several of my boards (#1641)

* copied mjt keymaps from archive

* All mjt boards now compile

* fixed jd45-mjt breathing

* Updates to fix SpaceFN but not tested yet.

* Still missing either spacebar or an adjacent keypress.

* Debugging rigged up for use with hid_listen.

* Reverted the default keymap to use tap_layer_key rather than custom.  Moved custom approach to keymap_debug.c

* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.

* Cleaned up JD45 keymap that uses tapkey.

* Redid minivan keymap with numsym rather than raise/lower.
Untested.

* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.

* Minor keymap fixes to make them compile without errors.

* Added home/end to right arrow cluster on DYN layer.

* Added more keys to fn and dyn layers.

* It wasn't using my custom layer last time somehow...?  Now it will.

* Compiled and installed at end of day on 8/23

* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.

* Fixed volume controls... were reversed and disabled.

* Added F13-F15 back to fkeys layer in Minivan

* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.

* Removed DYN layer.

* Fixed diagram in planck numsym.

* Cleanup for pull request.

* Roadkit flip phone warning.

* Replaced PLAY_NOTES_ARRAY to PLAY_SONG

* reset the submodules

* checked out specific commits for submodules

* Removed debugging from JD45 shared config.h

* Moved custom rules.mk to apropriate keymap

Reset the shared rules.mk file.

* Trailing return issue in rules.mk

Gotta make for a smooth pull request :-)

4 files changed, 271 insertions, 0 deletions

diff --git a/keyboards/roadkit/keymaps/flipphone/Makefile b/keyboards/roadkit/keymaps/flipphone/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/roadkit/keymaps/flipphone/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/roadkit/keymaps/flipphone/config.h b/keyboards/roadkit/keymaps/flipphone/config.h
new file mode 100644
index 0000000000..df06a26206
--- /dev/null
+++ b/keyboards/roadkit/keymaps/flipphone/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/roadkit/keymaps/flipphone/keymap.c
new file mode 100644
index 0000000000..b48d72e9ee
--- /dev/null
+++ b/keyboards/roadkit/keymaps/flipphone/keymap.c
@@ -0,0 +1,216 @@
+#include "roadkit.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#ifdef BACKLIGHT_ENABLE
+  #include "backlight.h"
+#endif
+
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+void backlight_toggle(void){
+};
+
+enum roadkit_layers {
+  _NUMPAD,
+  _FPH,
+  _FPHNOISY,
+  _ADJUST,
+  _DYN
+};
+
+enum roadkit_keycodes {
+  NUMPAD = SAFE_RANGE,
+  FPH_1,
+  FPH_2,
+  FPH_3,
+  FPH_4,
+  FPH_5,
+  FPH_6,
+  FPH_7,
+  FPH_8,
+  FPH_9,
+  FN_0,
+  BACKLIT,
+  MACSLEEP,
+  DYNAMIC_MACRO_RANGE,
+};
+
+#include "dynamic_macro.h"
+
+// Fillers to make keymaps cleaner looking
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_NUMPAD] = /* Numpad */
+    KEYMAP(KC_KP_7, KC_KP_8,   KC_KP_9, KC_KP_PLUS,  \
+           KC_KP_4, KC_KP_5,   KC_KP_6,              \
+           KC_KP_1, KC_KP_2,   KC_KP_3, KC_KP_ENTER, \
+           LT(_ADJUST, KC_KP_0),  KC_KP_DOT),
+  [_FPH] = /* Quiet T9 */
+    KEYMAP(FPH_7, FPH_8,   FPH_9, KC_KP_PLUS,  \
+           FPH_4, FPH_5,   FPH_6,              \
+           FPH_1, FPH_2,   FPH_3, SFT_T(KC_KP_ENTER), \
+           LT(_ADJUST, KC_SPACE),   KC_KP_DOT),
+  [_FPHNOISY] = /* Noisy T9 */
+    KEYMAP(FPH_7, FPH_8,   FPH_9, KC_KP_PLUS,  \
+           FPH_4, FPH_5,   FPH_6,              \
+           FPH_1, FPH_2,   FPH_3, SFT_T(KC_KP_ENTER), \
+           LT(_ADJUST, KC_SPACE),   KC_KP_DOT),
+ [_ADJUST] = /* Adjustments */
+   KEYMAP(KC_NUMLOCK, TG(_FPHNOISY),  TG(_FPH), TG(_NUMPAD),  \
+         KC_BSPC, BACKLIT,   KC_DEL,              \
+         MACSLEEP, _______,   _______, _______, \
+         _______,           MO(_DYN)),
+ [_DYN] = /* DYNAMIC MACRO */
+    KEYMAP(DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP,  \
+         _______, _______,  _______,              \
+         DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \
+         _______,            _______),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+uint16_t fph_tap_qty = false;
+uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower...
+
+uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods"
+  tap_qty--; // reduce by one to match array indexes.
+  switch(keycode){
+    case FPH_2:
+      {uint16_t kc[] = {KC_A, KC_B, KC_C};
+       if(tap_qty % 6 > 2)
+        return LSFT(kc[tap_qty % 3]);
+      return kc[tap_qty % 3];}
+    break;
+    case FPH_3:
+      {uint16_t kc[] = {KC_D, KC_E, KC_F};
+       if(tap_qty % 6 > 2)
+        return LSFT(kc[tap_qty % 3]);
+      return kc[tap_qty % 3];}
+    break;
+    case FPH_4:
+      {uint16_t kc[] = {KC_G, KC_H, KC_I};
+       if(tap_qty % 6 > 2)
+        return LSFT(kc[tap_qty % 3]);
+      return kc[tap_qty % 3];}
+    break;
+    case FPH_5:
+      {uint16_t kc[] = {KC_J, KC_K, KC_L};
+       if(tap_qty % 6 > 2)
+        return LSFT(kc[tap_qty % 3]);
+      return kc[tap_qty % 3];}
+    break;
+    case FPH_6:
+      {uint16_t kc[] = {KC_M, KC_N, KC_O};
+       if(tap_qty % 6 > 2)
+        return LSFT(kc[tap_qty % 3]);
+      return kc[tap_qty % 3];}
+    break;
+    case FPH_7:
+      {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S};
+       if(tap_qty % 8 > 2)
+        return LSFT(kc[tap_qty % 4]);
+      return kc[tap_qty % 4];}
+    break;
+    case FPH_8:
+      {uint16_t kc[] = {KC_T, KC_U, KC_V};
+       if(tap_qty % 8 > 2)
+        return LSFT(kc[tap_qty % 4]);
+      return kc[tap_qty % 4];}
+    break;
+    case FPH_9:
+      {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z};
+       if(tap_qty % 8 > 2)
+        return LSFT(kc[tap_qty % 4]);
+      return kc[tap_qty % 4];}
+    break;
+    case FPH_1:
+      {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \
+          KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \
+          KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \
+          KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)};
+      return kc[tap_qty % 26];}
+  }
+  return KC_NO;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (!process_record_dynamic_macro(keycode, record)) {
+      return false;
+    }
+    uint8_t layer;
+    layer = biton32(layer_state);
+
+    switch (keycode) {
+    case FPH_1 ... FPH_9:
+      if(layer == _FPHNOISY){
+        if (record->event.pressed) {
+          if(fph_keycode != keycode) { // key change
+            fph_tap_qty = 0;
+            fph_keycode = keycode;
+          } else { // same key tapped again so erase and increment.
+            register_code(KC_BSPC);
+            unregister_code(KC_BSPC);
+            fph_tap_qty++;
+          }
+          uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty);
+          // find mods? Apply mods..
+          register_code(render_keycode);
+          unregister_code(render_keycode);
+        } else {
+          // do we need to do anything on key-release?
+        }
+      } else { // not noisy, be demure .
+        if (record->event.pressed) {
+          if(fph_keycode != keycode) { // key change, kill everything.
+            uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty);
+            // find mods? Apply mods..
+            register_code(render_keycode);
+            unregister_code(render_keycode);
+            fph_keycode = keycode;
+            fph_tap_qty = 0;
+          } else { // same key tapped again so increment counter silently
+            fph_tap_qty++;
+          }
+        } else {
+            // do we need to do anything on key-release?
+            // maybe start a timer on this one?
+        }
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      }
+      return false;
+      break;
+    case MACSLEEP:
+      if (record->event.pressed) {
+          register_code(KC_RSFT);
+          register_code(KC_RCTL);
+          register_code(KC_POWER);
+          unregister_code(KC_POWER);
+          unregister_code(KC_RCTL);
+          unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/roadkit/keymaps/flipphone/readme.md
new file mode 100644
index 0000000000..ad630be195
--- /dev/null
+++ b/keyboards/roadkit/keymaps/flipphone/readme.md
@@ -0,0 +1,26 @@
+# Flip Phone layout for Roadkit
+
+BEWARE, THIS DOES NOT WORK YET. 
+
+Uses the numpad with classic cellular phone style letters assigned to the numbers.
+
+# LAYERS
+
+* Numpad - The layer that matches the caps mostly
+* FPH - Base layer for text
+* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced
+* DYN - dynamic macro layer for recording and playing macros
+
+## FPH
+
+Poke the "2" key twice and it makes "B".
+
+## FPHNOISY
+
+Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through.
+
+## MACROS
+
+May be able to record macros with the T9 layer because the "KC_*"s are only sent
+at the end.  Trying to do a macro with T9NOISY would probably fill up the buffer
+in just a few characters.