Merge branch 'master' of https://github.com/qmk/qmk_firmware

21 files changed, 0 insertions, 1672 deletions

diff --git a/keyboards/ut47/LED_controls.ino b/keyboards/ut47/LED_controls.ino
deleted file mode 100644
index dd50300eb7..0000000000
--- a/keyboards/ut47/LED_controls.ino
+++ /dev/null
@@ -1,420 +0,0 @@
-#include <FastGPIO.h>
-#include <TimerOne.h>
-
-int iByte;
-byte col = 0;
-byte leds[12][4];
-byte pass = 1;
-int fadecount = 1;
-const int fadelimit = 3000;
-const int fadelimitshort = 1000;
-byte mode = 4;
-byte brightness = 2;
-boolean changemode = 0;
-int rain = 0;
-const int rainlimit = 5000;
-const int rainfade = 5000;
-byte rx = 0;
-byte ry = 0;
-
-// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1)
-int pins[17] = {
-  -1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21
-};
-
-// col[xx] of leds = pin yy on led matrix
-int cols[12] = {
-  pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16]
-};
-
-// row[xx] of leds = pin yy on led matrix
-int rows[4] = {
-  pins[1], pins[2], pins[3], pins[4]
-};
-
-
-#define DELAY 0
-extern byte leds[12][4];
-
-void setup() {
-  Serial1.begin(9600);
-  setupLeds();
-  for (int s = 0; s < 5; s++) {
-    for ( int r = 1; r  < 9; r++)  {
-      delayMicroseconds(65000);
-      delayMicroseconds(65000);
-      for (int j = 0; j < 4; j++) {
-        for (int i = 0; i < 12; i++) {
-          leds[i][j] = 1;
-          for (int p = 0; p < 25; p++) {
-          }
-          leds[i][j] = r;
-        }
-      }
-    }
-    for ( int r = 9; r  > 0; r--)  {
-      delayMicroseconds(65000);
-      delayMicroseconds(65000);
-      delayMicroseconds(65000);
-      for (int j = 0; j < 4; j++) {
-        for (int i = 0; i < 12; i++) {
-          leds[i][j] = 1;
-          for (int p = 0; p < 25; p++) {
-          }
-          leds[i][j] = r;
-        }
-      }
-    }
-  }
-}
-
-void loop() {
-
-  switch (mode) {
-    case 0:
-      //Blacklight
-      for (int i = 0; i < 12; i++) {
-        for (int j = 0; j < 4; j++) {
-          leds[i][j] = brightness;
-        }
-      }
-      checkserial();
-      break;
-    case 1:
-      //Breathing
-      for ( int r = 1; r  < 9; r++)  {
-        checkserial();
-        if (changemode == 0) {
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-          for (int j = 0; j < 4; j++) {
-            for (int i = 0; i < 12; i++) {
-              leds[i][j] = 1;
-              for (int p = 0; p < 25; p++) {
-              }
-              leds[i][j] = r;
-            }
-          }
-        }
-        else {
-          break;
-        }
-      }
-      for ( int r = 9; r  > 0; r--)  {
-        checkserial();
-        if (changemode == 0) {
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-          for (int j = 0; j < 4; j++) {
-            for (int i = 0; i < 12; i++) {
-              leds[i][j] = 1;
-              for (int p = 0; p < 25; p++) {
-              }
-              leds[i][j] = r;
-            }
-          }
-        }
-        else {
-          break;
-        }
-      }
-      for ( int r = 1; r  < 30; r++)  {
-        checkserial();
-        if (changemode == 0) {
-          delayMicroseconds(65000);
-          delayMicroseconds(65000);
-        }
-        else {
-          break;
-        }
-      }
-      break;
-    case 2:
-      //Random
-      leds[random(12)][random(4)] = random(8);
-      delayMicroseconds(10000);
-      checkserial();
-      break;
-    case 3:
-      //Rain
-      rain++;
-      if (rain > rainlimit) {
-        rain = 0;
-        rx = random(12);
-        ry = random(4);
-        if (leds[rx][ry] == 0) {
-          leds[rx][ry] = 18;
-        }
-      }
-      fadecount++;
-      if (fadecount > rainfade) {
-        fadecount = 1;
-        for (int i = 0; i < 12; i++) {
-          for (int j = 0; j < 4; j++) {
-            if (leds[i][j] > 0) {
-              leds[i][j] = leds[i][j] - 1;
-            }
-          }
-        }
-      }
-      checkserial();
-      break;
-    case 4:
-      //Reactive
-      fadecount++;
-      if (fadecount > fadelimit) {
-        fadecount = 1;
-        for (int i = 0; i < 12; i++) {
-          for (int j = 0; j < 4; j++) {
-            if (leds[i][j] > 0) {
-              leds[i][j] = leds[i][j] - 1;
-            }
-          }
-        }
-      }
-      checkserial();
-      break;
-    case 5:
-      //Reactive Target
-      fadecount++;
-      if (fadecount > fadelimitshort) {
-        fadecount = 1;
-        for (int i = 0; i < 12; i++) {
-          for (int j = 0; j < 4; j++) {
-            if (leds[i][j] > 0) {
-              leds[i][j] = leds[i][j] - 1;
-            }
-          }
-        }
-      }
-      checkserial();
-      break;
-    default:
-      mode = 0;
-      break;
-  }
-  changemode = 0;
-}
-
-void checkserial() {
-  if (Serial1.available() > 0) {
-    iByte = Serial1.read();
-    if (iByte == 100) {
-      brightness++;
-      if (brightness > 9) {
-        brightness = 1;
-      }
-    }
-    if (iByte == 101) {
-      mode++;
-    }
-    if (iByte < 100) {
-      if (mode == 4) {
-        byte row = iByte / 16;
-        byte col = iByte % 16;
-        leds[col][row] = 18;
-      }
-      if (mode == 5) {
-        byte row = iByte / 16;
-        byte col = iByte % 16;
-        for (byte i = 0; i < 12;  i++) {
-          leds[i][row] = 18;
-        }
-        for (byte p = 0; p < 4;  p++) {
-          leds[col][p] = 18;
-        }
-      }
-    }
-  }
-}
-
-void setupLeds() {
-  // sets the pins as output
-  FastGPIO::Pin<2>::setOutputLow();
-  FastGPIO::Pin<3>::setOutputLow();
-  FastGPIO::Pin<4>::setOutputLow();
-  FastGPIO::Pin<5>::setOutputLow();
-  FastGPIO::Pin<6>::setOutputLow();
-  FastGPIO::Pin<7>::setOutputLow();
-  FastGPIO::Pin<8>::setOutputLow();
-  FastGPIO::Pin<9>::setOutputLow();
-  FastGPIO::Pin<10>::setOutputLow();
-  FastGPIO::Pin<16>::setOutputLow();
-  FastGPIO::Pin<14>::setOutputLow();
-  FastGPIO::Pin<15>::setOutputLow();
-  FastGPIO::Pin<18>::setOutputLow();
-  FastGPIO::Pin<19>::setOutputLow();
-  FastGPIO::Pin<20>::setOutputLow();
-  FastGPIO::Pin<21>::setOutputLow();
-
-  // set up Cols
-  FastGPIO::Pin<6>::setOutputValueLow();
-  FastGPIO::Pin<7>::setOutputValueLow();
-  FastGPIO::Pin<8>::setOutputValueLow();
-  FastGPIO::Pin<9>::setOutputValueLow();
-  FastGPIO::Pin<10>::setOutputValueLow();
-  FastGPIO::Pin<16>::setOutputValueLow();
-  FastGPIO::Pin<14>::setOutputValueLow();
-  FastGPIO::Pin<15>::setOutputValueLow();
-  FastGPIO::Pin<18>::setOutputValueLow();
-  FastGPIO::Pin<19>::setOutputValueLow();
-  FastGPIO::Pin<20>::setOutputValueLow();
-  FastGPIO::Pin<21>::setOutputValueLow();
-
-  // set up Rows
-  FastGPIO::Pin<2>::setOutputValueLow();
-  FastGPIO::Pin<3>::setOutputValueLow();
-  FastGPIO::Pin<4>::setOutputValueLow();
-  FastGPIO::Pin<5>::setOutputValueLow();
-
-  clearLeds();
-  Timer1.initialize(25);
-  Timer1.attachInterrupt(display);
-
-}
-
-void clearLeds() {
-  // Clear display array
-  for (int i = 0; i < 12; i++) {
-    for (int j = 0; j < 4; j++) {
-      leds[i][j] = 0;
-    }
-  }
-}
-
-void onLeds() {
-  // Clear display array
-  for (int i = 0; i < 12; i++) {
-    for (int j = 0; j < 4; j++) {
-      leds[i][j] = 7;
-    }
-  }
-}
-
-// Interrupt routine
-void display() {
-
-  switch (col) { // Turn whole previous column off
-    case 0:
-      FastGPIO::Pin<6>::setOutputValueLow();
-      break;
-    case 1:
-      FastGPIO::Pin<7>::setOutputValueLow();
-      break;
-    case 2:
-      FastGPIO::Pin<8>::setOutputValueLow();
-      break;
-    case 3:
-      FastGPIO::Pin<9>::setOutputValueLow();
-      break;
-    case 4:
-      FastGPIO::Pin<10>::setOutputValueLow();
-      break;
-    case 5:
-      FastGPIO::Pin<16>::setOutputValueLow();
-      break;
-    case 6:
-      FastGPIO::Pin<14>::setOutputValueLow();
-      break;
-    case 7:
-      FastGPIO::Pin<15>::setOutputValueLow();
-      break;
-    case 8:
-      FastGPIO::Pin<18>::setOutputValueLow();
-      break;
-    case 9:
-      FastGPIO::Pin<19>::setOutputValueLow();
-      break;
-    case 10:
-      FastGPIO::Pin<20>::setOutputValueLow();
-      break;
-    case 11:
-      FastGPIO::Pin<21>::setOutputValueLow();
-      break;
-  }
-
-  col++;
-  if (col == 12) {
-    col = 0;
-    pass++;
-    if (pass > 8) {
-      pass = 1;
-    }
-  }
-  for (int row = 0; row < 4; row++) {
-    if (leds[col][row] > pass) {
-      switch (row) { // Turn on this led
-        case 0:
-          FastGPIO::Pin<2>::setOutputValueLow();
-          break;
-        case 1:
-          FastGPIO::Pin<3>::setOutputValueLow();
-          break;
-        case 2:
-          FastGPIO::Pin<4>::setOutputValueLow();
-          break;
-        case 3:
-          FastGPIO::Pin<5>::setOutputValueLow();
-          break;
-      }
-    }
-    else {
-      switch (row) { // Turn off this led
-        case 0:
-          FastGPIO::Pin<2>::setOutputValueHigh();
-          break;
-        case 1:
-          FastGPIO::Pin<3>::setOutputValueHigh();
-          break;
-        case 2:
-          FastGPIO::Pin<4>::setOutputValueHigh();
-          break;
-        case 3:
-          FastGPIO::Pin<5>::setOutputValueHigh();
-          break;
-      }
-    }
-  }
-  switch (col) { // Turn column on
-    case 0:
-      FastGPIO::Pin<6>::setOutputValueHigh();
-      break;
-    case 1:
-      FastGPIO::Pin<7>::setOutputValueHigh();
-      break;
-    case 2:
-      FastGPIO::Pin<8>::setOutputValueHigh();
-      break;
-    case 3:
-      FastGPIO::Pin<9>::setOutputValueHigh();
-      break;
-    case 4:
-      FastGPIO::Pin<10>::setOutputValueHigh();
-      break;
-    case 5:
-      FastGPIO::Pin<16>::setOutputValueHigh();
-      break;
-    case 6:
-      FastGPIO::Pin<14>::setOutputValueHigh();
-      break;
-    case 7:
-      FastGPIO::Pin<15>::setOutputValueHigh();
-      break;
-    case 8:
-      FastGPIO::Pin<18>::setOutputValueHigh();
-      break;
-    case 9:
-      FastGPIO::Pin<19>::setOutputValueHigh();
-      break;
-    case 10:
-      FastGPIO::Pin<20>::setOutputValueHigh();
-      break;
-    case 11:
-      FastGPIO::Pin<21>::setOutputValueHigh();
-      break;
-  }
-
-}
diff --git a/keyboards/ut47/config.h b/keyboards/ut47/config.h
deleted file mode 100644
index 4335e3edd5..0000000000
--- a/keyboards/ut47/config.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-Copyright 2018 Carlos Filoteo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    40percent.club
-#define PRODUCT         ut47
-#define DESCRIPTION     An awesome 40% keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
-#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Enable GNAP matrix serial output */
-#define GNAP_ENABLE
-
-/* USART configuration */
-#ifdef __AVR_ATmega32U4__
-#      define SERIAL_UART_BAUD 9600
-#      define SERIAL_UART_DATA UDR1
-#      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
-#      define SERIAL_UART_RXD_VECT USART1_RX_vect
-#      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
-#      define SERIAL_UART_INIT() do { \
-            /* baud rate */ \
-            UBRR1L = SERIAL_UART_UBRR; \
-            /* baud rate */ \
-            UBRR1H = SERIAL_UART_UBRR >> 8; \
-            /* enable TX */ \
-            UCSR1B = _BV(TXEN1); \
-            /* 8-bit data */ \
-            UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
-            sei(); \
-        } while(0)
-#   else
-#       error "USART configuration is needed."
-#endif
-
-#endif
diff --git a/keyboards/ut47/keymaps/default/config.h b/keyboards/ut47/keymaps/default/config.h
deleted file mode 100644
index 46098a22fb..0000000000
--- a/keyboards/ut47/keymaps/default/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-// place overrides here
-
-#endif
diff --git a/keyboards/ut47/keymaps/default/keymap.c b/keyboards/ut47/keymaps/default/keymap.c
deleted file mode 100644
index 6b6bb025b1..0000000000
--- a/keyboards/ut47/keymaps/default/keymap.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-#ifdef LED_ENABLE
-  #include "protocol/serial.h"
-#endif
-
-#define _______ KC_TRNS
-#define LT3_TAB LT(3, KC_TAB)
-#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
-
-enum custom_keycodes {
-    LED_TOG = SAFE_RANGE,
-    LED_CHG
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Base Layer
-   * ,-------------------------------------------------------------------------.
-   * | Esc |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |Bspace |
-   * |-------------------------------------------------------------------------+
-   * |Tab/L3|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |   '  |
-   * |-------------------------------------------------------------------------+
-   * | Shift |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |Sh/En|
-   * |-------------------------------------------------------------------------+
-   * | Ctrl| Alt | Gui | App |  L2  |   Space   |  L1  | Left| Down|  Up |Right|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT(
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT_RSFT_ENT,
-  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-),
-
-  /* FN Layer 1
-   * ,-------------------------------------------------------------------------.
-   * | ` ~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  | Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |  -  |  =  |  [  |  ]  |  \   |
-   * |-------------------------------------------------------------------------+
-   * |       | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Right */
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-  /* FN Layer 2
-   * ,-------------------------------------------------------------------------.
-   * |   ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  |Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |  _  |  +  |  { |  }  |   |   |
-   * |-------------------------------------------------------------------------+
-   * |       | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Left */
-  KC_TILDE,  KC_EXCLAIM,  KC_AT,  KC_HASH,  KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE,
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-  /* FN Layer 2
-   * ,-------------------------------------------------------------------------.
-   * | Esc | Calc|Webhm| Mail| Comp|     |     |     |     |     |PrtSc|       |
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |     |     |     |     |      |
-   * |-------------------------------------------------------------------------+
-   * |       |LEDtg|LEDch|     |     |     |     |     |     |     |     |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |     |      |          |       |MousL|MousD|MousU|MousR|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Tab */
-  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
-),
-};
-
-//LED keymap functions
- #ifdef LED_ENABLE
-void led_chmode(void) {
-  serial_send(101);
-}
-
-void led_toggle(void) {
-  serial_send(100);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      case LED_TOG:
-        #ifdef LED_ENABLE
-        led_toggle();
-        #endif
-        return false;
-      case LED_CHG:
-        #ifdef LED_ENABLE
-        led_chmode();
-        #endif
-        return false;
-    }
-  }
-  return true;
-};
-#endif
diff --git a/keyboards/ut47/keymaps/default/readme.md b/keyboards/ut47/keymaps/default/readme.md
deleted file mode 100644
index e09dc73fab..0000000000
--- a/keyboards/ut47/keymaps/default/readme.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# UT47 default keymap
-
-![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
-
-[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
-
-### LED Controls
-
-Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
-
-Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: 
-
-- solid
-- breathing
-- random
-- rain
-- reactive
-- poptang
-- off
diff --git a/keyboards/ut47/keymaps/non-us/config.h b/keyboards/ut47/keymaps/non-us/config.h
deleted file mode 100644
index 46098a22fb..0000000000
--- a/keyboards/ut47/keymaps/non-us/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-// place overrides here
-
-#endif
diff --git a/keyboards/ut47/keymaps/non-us/keymap.c b/keyboards/ut47/keymaps/non-us/keymap.c
deleted file mode 100644
index 1cb537b7d0..0000000000
--- a/keyboards/ut47/keymaps/non-us/keymap.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-#ifdef LED_ENABLE
-  #include "protocol/serial.h"
-#endif
-
-#define _______ KC_TRNS
-#define LT3_TAB LT(3, KC_TAB)
-#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
-
-enum custom_keycodes {
-    LED_TOG = SAFE_RANGE,
-    LED_CHG
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Base Layer
-   * ,-------------------------------------------------------------------------.
-   * | Esc |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |Bspace |
-   * |-------------------------------------------------------------------------+
-   * |Tab/L3|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |   '  |
-   * |-------------------------------------------------------------------------+
-   * | Shift |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |Sh/En|
-   * |-------------------------------------------------------------------------+
-   * | Ctrl| Alt | Gui | App |  L2  |   Space   |  L1  | Left| Down|  Up |Right|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT(
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT_RSFT_ENT,
-  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-),
-
-  /* FN Layer 1
-   * ,-------------------------------------------------------------------------.
-   * | ` ~ |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  | Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |  #  |  -  |  =  |  [  |  ]  |  \   |
-   * |-------------------------------------------------------------------------+
-   * |       | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Right */
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
-  _______, _______, _______, _______, _______, _______, KC_NUHS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_NUBS,
-  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-  /* FN Layer 2
-   * ,-------------------------------------------------------------------------.
-   * |   ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  |Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |  _  |  +  |  { |  }  |   |   |
-   * |-------------------------------------------------------------------------+
-   * |       | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       | Home| PgDn| PgUp| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Left */
-  KC_TILDE,  KC_EXCLAIM,  KC_AT,  KC_HASH,  KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE,
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-  /* FN Layer 2
-   * ,-------------------------------------------------------------------------.
-   * | Esc | Calc|Webhm| Mail| Comp|     |     |     |     |     |PrtSc|       |
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |     |     |     |     |      |
-   * |-------------------------------------------------------------------------+
-   * |       |LEDtg|LEDch|     |     |     |     |     |     |     |     |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |     |      |          |       |MousL|MousD|MousU|MousR|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Tab */
-  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
-),
-};
-
-//LED keymap functions
- #ifdef LED_ENABLE
-void led_chmode(void) {
-  serial_send(101);
-}
-
-void led_toggle(void) {
-  serial_send(100);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      case LED_TOG:
-        #ifdef LED_ENABLE
-        led_toggle();
-        #endif
-        return false;
-      case LED_CHG:
-        #ifdef LED_ENABLE
-        led_chmode();
-        #endif
-        return false;
-    }
-  }
-  return true;
-};
-#endif
diff --git a/keyboards/ut47/keymaps/non-us/readme.md b/keyboards/ut47/keymaps/non-us/readme.md
deleted file mode 100644
index e09dc73fab..0000000000
--- a/keyboards/ut47/keymaps/non-us/readme.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# UT47 default keymap
-
-![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
-
-[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
-
-### LED Controls
-
-Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
-
-Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: 
-
-- solid
-- breathing
-- random
-- rain
-- reactive
-- poptang
-- off
diff --git a/keyboards/ut47/keymaps/nordic/config.h b/keyboards/ut47/keymaps/nordic/config.h
deleted file mode 100644
index fcdd2c2322..0000000000
--- a/keyboards/ut47/keymaps/nordic/config.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
diff --git a/keyboards/ut47/keymaps/nordic/keymap.c b/keyboards/ut47/keymaps/nordic/keymap.c
deleted file mode 100644
index cc3f43650e..0000000000
--- a/keyboards/ut47/keymaps/nordic/keymap.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-#ifdef LED_ENABLE
-  #include "protocol/serial.h"
-
-#endif
-
-#include "keymap_norwegian.h"
-
-#define _______ KC_TRNS
-#define LT3_TAB LT(3, KC_TAB)
-#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
-#define CTRADEL LALT(LCTL(KC_DEL))
-#define ALTTAB  LALT(KC_TAB)
-
-enum custom_keycodes {
-    LED_TOG = SAFE_RANGE,
-    LED_CHG
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /* Base Layer - L0
-   * ,-------------------------------------------------------------------------.
-   * | Esc |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |Bspace |
-   * |-------------------------------------------------------------------------+
-   * |Tab/L3|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  '  |Ent/RS|
-   * |-------------------------------------------------------------------------+
-   * | Shift |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  Up |  L4 |
-   * |-------------------------------------------------------------------------+
-   * | Ctrl| Gui |  L4 | Alt |  L2  |   Space   |  L1  | Ctrl| Left| Down|Right|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Base - L0 */
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    NO_APOS, MT_RSFT_ENT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,  MO(4),
-  KC_LCTL, KC_LGUI, MO(4), KC_LALT,  MO(2),      KC_SPC,        MO(1),  KC_RCTL, KC_LEFT, KC_DOWN,   KC_RGHT
-),
-
-  /* FN Layer 1
-   * ,-------------------------------------------------------------------------.
-   * |  |  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  | Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |     |  +  |  =  |  *  |  /   |
-   * |-------------------------------------------------------------------------+
-   * |       |     |     |     |     |     |     |     |  -  |  _  | PgUp|     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       |     | Home| PgDn| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Right modifier - L1 */
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, _______, NO_PLUS,  NO_EQL, NO_ASTR, NO_SLSH,
-  _______, _______, _______, _______, _______, _______, _______, _______,  NO_MINS,  NO_UNDS,  KC_PGUP, _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, _______, KC_HOME, KC_PGDN, KC_END
-),
-
-  /* FN Layer 2
-   * ,-------------------------------------------------------------------------.
-   * |  §  |  !  |  "  |  #  |  ¤  |  %  |  &  |  /  |  =  |  +  |  \  | Delete|
-   * |-------------------------------------------------------------------------+
-   * |      |     |  ?  |  {  |  [  |  (  |  )  |  ]  |  }  | F10 | F11 |  F12 |
-   * |-------------------------------------------------------------------------+
-   * |       | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | PgUp|     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |Capsl|      |          |       |     | Home| PgDn| End |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Left modifier - L2 */
-  NO_SECT, KC_EXCLAIM,  NO_QUO2, KC_HASH,  NO_BULT,  KC_PERCENT, NO_AMPR, NO_SLSH, NO_EQL, NO_PLUS, NO_BSLS, KC_DELETE,
-  _______, _______, NO_QUES, NO_LCBR, NO_LBRC, NO_LPRN, NO_RPRN, NO_RBRC, NO_RCBR, KC_F10, KC_F11, KC_F12,
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_PGUP,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, _______, KC_HOME, KC_PGDN, KC_END
-),
-
-  /* FN Layer 3
-   * ,-------------------------------------------------------------------------.
-   * | Esc | Calc|Webhm| Comp|Webrf|     |     |     |     |     |PrtSc|CtrAlDl|
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |     |     |     |     |VolDn|VolUp|     |     |      |
-   * |-------------------------------------------------------------------------+
-   * |       |LEDtg|LEDch|     |     |RESET|     | Mute|     |MouB1|MousU|MouB2|
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |     |      |          |       |     |MousL|MousD|MousR|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Hold Tab down - L3 */
-  KC_ESC,  KC_CALC, KC_WHOM, KC_MYCM, KC_WREF, _______, _______, _______, _______, _______, KC_PSCR, CTRADEL,
-  _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______, _______, _______,
-  _______, LED_TOG, LED_CHG, _______, _______,   RESET, _______, KC_MUTE, _______, KC_MS_BTN1, KC_MS_U, KC_MS_BTN2,
-  _______, _______, _______, _______, _______,     _______,      _______, _______, KC_MS_L, KC_MS_D, KC_MS_R
-),
-
-  /* FN Layer 4
-   * ,-------------------------------------------------------------------------.
-   * |     |     |  @  |  £  |  $  |  ~  |     |  ¨  |  ´  |  `  |  Å  |       |
-   * |-------------------------------------------------------------------------+
-   * |      |     |     |  €  |     |     |     |     |  ^  |  Ø  |  Æ  |      |
-   * |-------------------------------------------------------------------------+
-   * |       |  <  |     |     |     |     |     |  µ  |     |     |     |     |
-   * |-------------------------------------------------------------------------+
-   * |     |     |     |     |      |          |       | L5  |     |     |     |
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* Norsk - L4 */
-  _______, _______,   NO_AT,  NO_PND,  NO_DLR, NO_TILD, _______, NO_QUOT, NO_ACUT,  NO_GRV,   NO_AA, _______,
-  _______, _______, _______, NO_EURO, _______, _______, _______, _______, NO_CIRC, NO_OSLH,   NO_AE, _______,
-  _______, NO_LESS, _______, _______, _______, _______, _______,   NO_MU, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______,     _______,      _______,   TO(5), _______, _______, _______
-),
-
-  /* GAMING Layer (toggle on and off)
-   * ,-------------------------------------------------------------------------.
-   * | Esc |  Q  |  W  |  E  |  R  |  T  |  Y  |  F1 |  F2 |  F3 |  F4 |Alt+Tab|
-   * |-------------------------------------------------------------------------+
-   * | Tab  |  A  |  S  |  D  |  F  |  G  |  H  |  F5 |  F6 |  F7 |  F8 | Enter|
-   * |-------------------------------------------------------------------------+
-   * | Shift |  1  |  2  |  3  |  4  |  5  |  6  |  F9 | F10 | F11 | Up  |TOGGL|
-   * |-------------------------------------------------------------------------+
-   * | Ctrl|  Z  |  X  |  C  |   B  |   Space   |   M  |  V  |Left |Down |Right|
-   * `-------------------------------------------------------------------------'
-   */
-
-LAYOUT( /* GAMING, toggled on and off - L5 */
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_F1,    KC_F2,    KC_F3,    KC_F4, ALTTAB,
-  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_F5,    KC_F6,    KC_F7,    KC_F8,  KC_ENT,
-  KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,   KC_F11,    KC_UP,   TO(0),
-  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_B,      KC_SPC,          KC_M,     KC_V,  KC_LEFT,  KC_DOWN, KC_RGHT
-),
-};
-
-//LED keymap functions
- #ifdef LED_ENABLE
-void led_chmode(void) {
-  serial_send(101);
-}
-
-void led_toggle(void) {
-  serial_send(100);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      case LED_TOG:
-        #ifdef LED_ENABLE
-        led_toggle();
-        #endif
-        return false;
-      case LED_CHG:
-        #ifdef LED_ENABLE
-        led_chmode();
-        #endif
-        return false;
-    }
-  }
-  return true;
-};
-#endif
diff --git a/keyboards/ut47/keymaps/nordic/readme.md b/keyboards/ut47/keymaps/nordic/readme.md
deleted file mode 100644
index 4b0d0eb122..0000000000
--- a/keyboards/ut47/keymaps/nordic/readme.md
+++ /dev/null
@@ -1,33 +0,0 @@
-# UT47 Nordic keymap
-
-
-![UT47 Nordic layout image](https://i.imgur.com/ZNtF4wA.png)
-
-[KLE - Nordic layout](http://www.keyboard-layout-editor.com/##@_name=UT47%20-%20Nordic%20layout&author=neonSpork%3B&@_a:7%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Backspace%3B&@_c=%23c75656&a:4&w:1.25%3B&=%0A%0A%0AL3%0A%0A%0A%0A%0A%0ATab&_c=%23cccccc&a:7%3B&=A&=S&=D&=F&=G&=H&=J&=K&=L&='&_a:4&w:1.25%3B&=Enter%0A%0A%0ARShift%3B&@_a:7&w:1.5%3B&=LShift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F&uarr%2F%3B&_c=%23bb45c4%3B&=L4%3B&@_c=%23cccccc%3B&=LCtrl&=LGUI&_c=%23bb45c4%3B&=L4&_c=%23cccccc%3B&=LAlt&_c=%2333aaff&w:1.25%3B&=L2&_c=%23cccccc&w:2%3B&=Space&_c=%23f5b047&w:1.25%3B&=L1&_c=%23cccccc%3B&=RCtrl&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&rarr%2F%3B%3B&@_y:0.25&c=%23f5b047%3B&=%7C&=1&=2&=3&=4&=5&=6&=7&=8&=9&=0&_w:1.5%3B&=Delete%3B&@_w:1.25%3B&=&=&=&=&=&=&=&=&=+&=%2F=&=*&_w:1.25%3B&=%2F%2F%3B&@_w:1.5%3B&=&=&=&=&=&=&=&=&=-&=%2F_&=PgUp&=%3B&@=&=&=&=Caps&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&=Home&=PgDn&=End%3B&@_y:0.25&c=%2333aaff%3B&=%C2%A7&=!&=%22&=%23&=%C2%A4&=%25&=%2F&&=%2F%2F&=%2F=&=+&=%5C&_w:1.5%3B&=Delete%3B&@_w:1.25%3B&=&=&=%3F&=%7B&=%5B&=(&=)&=%5D&=%7D&=F10&=F11&_w:1.25%3B&=F12%3B&@_w:1.5%3B&=&=F1&=F2&=F3&=F4&=F5&=F6&=F7&=F8&=F9&=PgUp&=%3B&@=&=&=&=Caps&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&=Home&=PgDn&=End%3B&@_y:0.25&c=%23c75656%3B&=Esc&=Calc&_a:5%3B&=www%0A%0A%0A%0A%0A%0Ahome&=My%0A%0A%0A%0A%0A%0AComp&=www%0A%0A%0A%0A%0A%0ARefresh&_a:7%3B&=&=&=&=&=&=PrtScr&_w:1.5%3B&=Ctr%20Alt%20Del%3B&@_w:1.25%3B&=&=&=&=&=&=&=&=VolDn&=VolUp&=&=&_w:1.25%3B&=%3B&@_w:1.5%3B&=&=LEDtg&=LEDch&=&=&=RESET&=&=Mute&=&_a:5%3B&=Mouse%0AClick%0A%0A%0A%0A%0ALeft&=Mouse%0A%0A%0A%0A%0A%0AUp&=Mouse%0AClick%0A%0A%0A%0A%0ARight%3B&@_a:7%3B&=&=&=&=&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&=&_a:5%3B&=Mouse%0A%0A%0A%0A%0A%0ALeft&=Mouse%0A%0A%0A%0A%0A%0ADown&=Mouse%0A%0A%0A%0A%0A%0ARight%3B&@_y:0.25&c=%23bb45c4&a:7%3B&=&=&=%2F@&=%C2%A3&=$&=~&=&=%C2%A8&=%C2%B4&=%60&=%C3%85&_w:1.5%3B&=%3B&@_w:1.25%3B&=&=&=&=%E2%82%AC&=&=&=&=&=%5E&=%C3%98&=%C3%86&_w:1.25%3B&=%3B&@_w:1.5%3B&=&=%3C&=&=&=&=&=&=%C2%B5&=&=&=&=%3B&@=&=&=&=&_w:1.25%3B&=&_w:2%3B&=&_w:1.25%3B&=&_c=%2345b564&a:5%3B&=L5%0A%0A%0A%0A%0A%0AON&_c=%23bb45c4&a:7%3B&=&=&=%3B&@_y:0.25&c=%2345b564%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=F1&=F2&=F3&=F4&_w:1.5%3B&=Alt%20Tab%3B&@_w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=F5&=F6&=F7&=F8&_w:1.25%3B&=Enter%3B&@_w:1.5%3B&=Shift&=1&=2&=3&=4&=5&=6&=F9&=F10&=F11&=%2F&uarr%2F%3B&_c=%23cccccc&a:5%3B&=L5%0A%0A%0A%0A%0A%0AOFF%3B&@_c=%2345b564&a:7%3B&=LCtrl&=Z&=X&=C&_w:1.25%3B&=B&_w:2%3B&=Space&_w:1.25%3B&=M&=V&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&rarr%2F)
-
-
-Chose to modify the layout to include dedicated arrows on the bottom right. Layers 1-4 are modifiers, layer 5 is a toggle on gaming mode. Tab is dual function: Tap for Tab and hold for L3. So is enter: tap for Enter and hold for Right shift.
-
-### Nordic characters
-On its own modifier layer, accessed from left (between left GUI and ALT) or right (above Right arrow)
-
-### Gaming layer
-Toggled on/off, accessed via the Nordic layer.
-
-Toggle on: <kbd>L4</kbd>+<kbd>RCtrl</kbd>
-
-Toggle off: <kbd>L4</kbd> (above <kbd>&rarr;</kbd>)
-
-### LED Controls
-
-Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
-
-Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: 
-
-- solid
-- breathing
-- random
-- rain
-- reactive
-- poptang
-- off
diff --git a/keyboards/ut47/keymaps/rgb/config.h b/keyboards/ut47/keymaps/rgb/config.h
deleted file mode 100644
index 0eb010a3ae..0000000000
--- a/keyboards/ut47/keymaps/rgb/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-// place overrides here
-#define RGBLIGHT_ANIMATIONS
-#define RGB_DI_PIN D3    // The pin the LED strip is connected to
-#define RGBLED_NUM 7     // Number of LEDs in your strip
-
-#endif
diff --git a/keyboards/ut47/keymaps/rgb/keymap.c b/keyboards/ut47/keymaps/rgb/keymap.c
deleted file mode 100644
index 58d11031ad..0000000000
--- a/keyboards/ut47/keymaps/rgb/keymap.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-#ifdef LED_ENABLE
-  #include "protocol/serial.h"
-#endif
-
-#define _______ KC_TRNS
-#define LT3_TAB LT(3, KC_TAB)
-#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
-
-enum custom_keycodes {
-    LED_TOG = SAFE_RANGE,
-    LED_CHG
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-LAYOUT(
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT_RSFT_ENT,
-  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-),
-
-LAYOUT(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-LAYOUT(
-  KC_FN6,  KC_FN7,  KC_FN8,  KC_FN9,  KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE,
-  _______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21,
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
-  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
-),
-
-LAYOUT( /* Tab */
-  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______,
-  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
-),
-};
-
-//LED keymap functions
- #ifdef LED_ENABLE
-void led_chmode(void) {
-  serial_send(101);
-}
-
-void led_toggle(void) {
-  serial_send(100);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      case LED_TOG:
-        #ifdef LED_ENABLE
-        led_toggle();
-        #endif
-        return false;
-      case LED_CHG:
-        #ifdef LED_ENABLE
-        led_chmode();
-        #endif
-        return false;
-    }
-  }
-  return true;
-};
-#endif
diff --git a/keyboards/ut47/keymaps/rgb/readme.md b/keyboards/ut47/keymaps/rgb/readme.md
deleted file mode 100644
index 00076bfc49..0000000000
--- a/keyboards/ut47/keymaps/rgb/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-WS2812B LED added and connected to pin D3 as described here: https://www.40percent.club/2018/04/gnap-underglow.html
diff --git a/keyboards/ut47/keymaps/rgb/rules.mk b/keyboards/ut47/keymaps/rgb/rules.mk
deleted file mode 100644
index 1e3cebb145..0000000000
--- a/keyboards/ut47/keymaps/rgb/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-RGBLIGHT_ENABLE = yes
diff --git a/keyboards/ut47/led.c b/keyboards/ut47/led.c
deleted file mode 100644
index 9458c038fe..0000000000
--- a/keyboards/ut47/led.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output low
-        DDRB |= (1<<0);
-        PORTB &= ~(1<<0);
-        DDRD |= (1<<5);
-        PORTD &= ~(1<<5);
-    } else {
-        // Hi-Z
-        DDRB &= ~(1<<0);
-        PORTB &= ~(1<<0);
-        DDRD &= ~(1<<5);
-        PORTD &= ~(1<<5);
-    }
-}
diff --git a/keyboards/ut47/matrix.c b/keyboards/ut47/matrix.c
deleted file mode 100644
index 921bc9ed5e..0000000000
--- a/keyboards/ut47/matrix.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
-Copyright 2018 Carlos Filoteo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#ifdef LED_ENABLE
-    #include "protocol/serial.h"
-#endif
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE	5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-  
-#ifdef LED_ENABLE
-    serial_init();
-#endif
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-/* Column pin configuration
- * col: 0   1   2   3   4   5   6   7   8   9   10  11
- * pin: D7  E6  B4  B5  B6  B2  B3  B1  F7  F6  F5  F4
- */
-
-static void  init_cols(void)
-{
-    // Input with pull-up(DDR:0, PORT:1)
-    DDRF  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
-    PORTF |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
-    DDRE  &= ~(1<<6);
-    PORTE |=  (1<<6);
-    DDRD  &= ~(1<<7);
-    PORTD |=  (1<<7);
-    DDRB  &= ~(1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
-    PORTB |=  (1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
-}
-
-static matrix_row_t read_cols(void)
-{
-    return (PIND&(1<<7) ? 0 : (1<<0)) |
-           (PINE&(1<<6) ? 0 : (1<<1)) |
-           (PINB&(1<<4) ? 0 : (1<<2)) |
-           (PINB&(1<<5) ? 0 : (1<<3)) |
-           (PINB&(1<<6) ? 0 : (1<<4)) |
-           (PINB&(1<<2) ? 0 : (1<<5)) |
-           (PINB&(1<<3) ? 0 : (1<<6)) |
-           (PINB&(1<<1) ? 0 : (1<<7)) |
-           (PINF&(1<<7) ? 0 : (1<<8)) |
-           (PINF&(1<<6) ? 0 : (1<<9)) |
-           (PINF&(1<<5) ? 0 : (1<<10)) |
-           (PINF&(1<<4) ? 0 : (1<<11));
-}
-
-/* Row pin configuration
- * row: 0   1   2   3
- * pin: D1  D0  D4  C6
- */
-
-static void unselect_rows(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRD  &= ~0b00010011;
-    PORTD &= ~0b00010011;
-    DDRC  &= ~0b01000000;
-    PORTC &= ~0b01000000;
-}
-
-static void select_row(uint8_t row)
-{
-    // Output low(DDR:1, PORT:0) to select
-    switch (row) {
-        case 0:
-            DDRD  |= (1<<1);
-            PORTD &= ~(1<<1);
-            break;
-        case 1:
-            DDRD  |= (1<<0);
-            PORTD &= ~(1<<0);
-            break;
-        case 2:
-            DDRD  |= (1<<4);
-            PORTD &= ~(1<<4);
-            break;
-        case 3:
-            DDRC  |= (1<<6);
-            PORTC &= ~(1<<6);
-            break;
-    }
-}
diff --git a/keyboards/ut47/readme.md b/keyboards/ut47/readme.md
deleted file mode 100644
index 3f08b3b329..0000000000
--- a/keyboards/ut47/readme.md
+++ /dev/null
@@ -1,41 +0,0 @@
-# ut47
-
-![ut47](https://i.imgur.com/ZDKZQaj.jpg)
-
-Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
-
-Keyboard Maintainer: [filoxo](https://github.com/filoxo), [network_operations]
-
-Hardware Supported: [PCB design](http://www.40percent.club/2016/10/gnap-20-plateless.html), Arduino Pro Micro
-
-Hardware Availability: [How to order](http://www.40percent.club/2017/03/ordering-pcb.html)
-
-### Instructions
-
-To flash the UT47 without LEDs (single controller), run:
-
-    make ut47:default
-
-To enable the UT47 LEDs (dual controller), run this for the main controller:
-
-    make ut47:default LED_ENABLE=yes
-
-Or you can add `LED_ENABLE = yes` to *rules.mk*
-
-And then flash [LED_controls.ino](LED_controls.ino) to the second controller using [Arduino IDE](https://www.arduino.cc/en/Main/Software) or similar. NOTE: Arduino IDE will require importing additional libraries to compile. 
-
-<small>The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).</small>
-
-### Layout
-
-Go to the [default layout README](keymaps/default/readme.md) for more information.
-
-### Additional info
-
-Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap)
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-
-### Build Guide
-
-[u/network_operations' build guide thread](https://www.reddit.com/r/MechanicalKeyboards/comments/7wqktu/gnap_the_cheap_40/)
diff --git a/keyboards/ut47/rules.mk b/keyboards/ut47/rules.mk
deleted file mode 100644
index b046598669..0000000000
--- a/keyboards/ut47/rules.mk
+++ /dev/null
@@ -1,70 +0,0 @@
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader
-BOOTLOADER = caterina
-
-# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC += matrix.c protocol/serial_uart.c
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-ifeq ($(strip $(LED_ENABLE)), yes)
-  OPT_DEFS += -DLED_ENABLE
-  SRC += led.c
-endif
diff --git a/keyboards/ut47/ut47.c b/keyboards/ut47/ut47.c
deleted file mode 100644
index f467fd130a..0000000000
--- a/keyboards/ut47/ut47.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "ut47.h"
-#ifdef LED_ENABLE
-  #include "protocol/serial.h"
-#endif
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-  if (record->event.pressed) {
-    #ifdef LED_ENABLE
-      serial_send((record->event.key.row*16)+record->event.key.col);
-    #endif
-  }
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
diff --git a/keyboards/ut47/ut47.h b/keyboards/ut47/ut47.h
deleted file mode 100644
index a4507dd34d..0000000000
--- a/keyboards/ut47/ut47.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef UT47_H
-#define UT47_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
-  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3a, K3b  \
-) \
-  { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \
-    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b }  \
-  }
-
-#define LAYOUT_kc( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
-  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
-  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
-  K30, K31, K32, K33, K34,    K35,   K37, K38, K39, K3a, K3b  \
-) \
-  LAYOUT( \
-    KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, \
-    KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, \
-    KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, \
-    KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34,      KC_##K35,      KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b \
-  )
-
-#define LAYOUT_kc_ut47 LAYOUT_kc
-
-#endif