Keyboard: Add yosino58 Keyboard (#5465)

* Keyboard: Add yosino58 Keyboard

* Keyboard: Add yosino58 Keyboard

3 files changed, 410 insertions, 0 deletions

diff --git a/keyboards/yosino58/keymaps/default/config.h b/keyboards/yosino58/keymaps/default/config.h
new file mode 100644
index 0000000000..21fc2d3b54
--- /dev/null
+++ b/keyboards/yosino58/keymaps/default/config.h
@@ -0,0 +1,43 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+// #define SSD1306_128X64
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
\ No newline at end of file
diff --git a/keyboards/yosino58/keymaps/default/keymap.c b/keyboards/yosino58/keymaps/default/keymap.c
new file mode 100644
index 0000000000..79b5075696
--- /dev/null
+++ b/keyboards/yosino58/keymaps/default/keymap.c
@@ -0,0 +1,337 @@
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  RGBRST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* QWERTY
+ * ,-----------------------------------------.                                  ,-----------------------------------------.
+ * |  `   |   1  |   2  |   3  |   4  |   5  |                                  |   6  |   7  |   8  |   9  |   0  |  -   |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |                                  |   Y  |   U  |   I  |   O  |   P  |  =   |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |LShift|   A  |   S  |   D  |   F  |   G  |                                  |   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |LCTRL |   Z  |   X  |   C  |   V  |   B  |-------.-------.  ,---------------|   N  |   M  |   ,  |   .  |   /  |  \   |
+ * `-----------------------------------------/  Del  /       /   \       \ Bksp \----------------------------------------'
+ *                          | LAlt |ADJUST| /-------/ Space /     \ Enter \-------\  |   [  |  ]   |
+ *                          |      |      |/ LOWER /       /       \       \ RAISE \ |      |      |
+ *                          `-----------------------------'         '------------------------------'
+ */
+ [_QWERTY] = LAYOUT( \
+  KC_GRV,   KC_1, KC_2, KC_3, KC_4,    KC_5,                                       KC_6,    KC_7,    KC_8,    KC_9,   KC_0,    KC_MINS, \
+  KC_TAB,   KC_Q, KC_W, KC_E, KC_R,    KC_T,                                       KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,    KC_EQL,  \
+  KC_LSFT,  KC_A, KC_S, KC_D, KC_F,    KC_G,                                       KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT, \
+  KC_LCTRL, KC_Z, KC_X, KC_C, KC_V,    KC_B,   KC_DEL, KC_SPC, KC_ENT, KC_BSPC,    KC_N,    KC_M,    KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, \
+                              KC_LALT, ADJUST, LOWER,                  RAISE,      KC_LBRC, KC_RBRC\
+  ),
+
+/* LOWER
+ * ,-----------------------------------------.                                  ,-----------------------------------------.
+ * | ESC  |  F1  |  F2  |  F3  |  F4  |  F5  |                                  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * | Tab  |   /  |   -  |   7  |   8  |   9  |                                  |   !  |   @  |   #  |   $  |   %  |  F12 |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |LShift|   *  |   +  |   4  |   5  |   6  |                                  |   ^  |   &  |   *  |   (  |   )  |   -  |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |LCTRL |   .  |   0  |   1  |   2  |   3  |-------.-------.  ,---------------|      |   _  |   +  |   {  |   }  |   |  |
+ * `-----------------------------------------/  F11  /       /   \       \  F12  \----------------------------------------'
+ *                          | LAlt | LGUI | /-------/ Space /     \ Enter \-------\  | Caps |  Num |
+ *                          |      |      |/ LOWER /       /       \       \       \ |      |      |
+ *                          `-----------------------------'         '------------------------------'
+ */
+ [_LOWER] = LAYOUT( \
+  KC_ESC,  KC_F1,   KC_F2,   KC_F3, KC_F4,   KC_F5,                                        KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, \
+  _______, KC_PSLS, KC_PMNS, KC_P7, KC_P8,   KC_P9,                                        KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_F12, \
+  _______, KC_PAST, KC_PPLS, KC_P4, KC_P5,   KC_P6,                                        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, \
+  _______, KC_PDOT, KC_P0,   KC_P1, KC_P2,   KC_P3,   _______,  _______, _______, _______, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+                                    _______, KC_LGUI, _______,                    XXXXXXX, KC_CLCK, KC_NLCK\
+
+  ),
+
+/* RAISE
+ * ,-----------------------------------------.                                  ,-----------------------------------------.
+ * |      |      |      |      |      |      |                                  |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |      |   1  |   2  |   3  |   4  |   5  |                                  |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |  F1  |  F2  |  F3  | F4  |  F5  |  F6  |                                  |      |  ��  |      |      |      |      |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |-------.-------.  ,---------------|  ��  |  ��  |  ��  |      |      |      |
+ * `-----------------------------------------/       /       /   \       \       \----------------------------------------'
+ *                          |      |      | /-------/ Space /     \ Enter \-------\  |      |      |
+ *                          |      |      |/       /       /       \       \ RAISE \ |      |      |
+ *                          `-----------------------------'         '------------------------------'
+ */
+ [_RAISE] = LAYOUT( \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,                                     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, KC_1,    KC_2,    KC_3,    KC_4,     KC_5,                                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    XXXXXXX, \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6,                                       XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  XXXXXXX, _______, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, \
+                                      XXXXXXX,  XXXXXXX, XXXXXXX,                   _______, XXXXXXX, XXXXXXX \
+  ),
+
+/*   ADJUST
+ * ,-----------------------------------------.                                  ,-----------------------------------------.
+ * |RESET |      |      |      |      |      |                                  | Mute | Vol+ | Play |      |      |      |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |      |      |      | PSCR | SLCK | Pause|                                  | Prev | Vol- | Next |      |      |      |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |      |      |      |Insert| Home |PageUP|                                  |      |      |RGB ON| HUE+ | SAT+ | VAL+ |
+ * |------+------+------+------+------+------|                                  |------+------+------+------+------+------|
+ * |      |      |      |  Del | End  |PageDN|-------.-------.  ,---------------|      |RGB Re| MODE | HUE- | SAT- | VAL- |
+ * `-----------------------------------------/       /       /   \       \       \----------------------------------------'
+ *                          |      |ADJUST| /-------/ Space /     \ Enter \-------\  |      |      |
+ *                          |      |      |/       /       /       \       \       \ |      |      |
+ *                          `-----------------------------'         '------------------------------'
+ */
+ [_ADJUST] = LAYOUT( \
+  RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                                     KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS,                                     KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, KC_INS,  KC_HOME, KC_PGUP,                                     XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+  XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL,  KC_END,  KC_PGDN, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST,  RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \
+                                      XXXXXXX, _______, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX \
+  ) 
+};
+
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+      #ifdef SSD1306_128X64
+        iota_gfx_init(false);   // turns on the display
+      #else
+        iota_gfx_init(!has_usb());   // turns on the display
+      #endif
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+//assign the right code to your layers for OLED display
+#define L_QWERTY 0
+#define L_LOWER 2
+#define L_RAISE 4
+#define L_ADJUST 8
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_logo(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    static char indctr[2][20][5]=
+    {
+      // white icon
+      {
+        {0x80,0x81,0x82,0x83,0},
+        {0x88,0x89,0x8A,0x8B,0},
+        {0x90,0x91,0x92,0x93,0},
+        {0x98,0x99,0x9A,0x9B,0},
+        {0x01,0x02,0x03,0x04,0},
+        {0xA0,0xA1,0xA2,0xA3,0},
+        {0xA8,0xA9,0xAA,0xAB,0},
+        {0xB0,0xB1,0xB2,0xB3,0},
+        {0xB8,0xB9,0xBA,0xBB,0},
+        {0x21,0x22,0x23,0x24,0},
+        {0xC0,0xC1,0xC2,0xC3,0},
+        {0xC8,0xC9,0xCA,0xCB,0},
+        {0xD0,0xD1,0xD2,0xD3,0},
+        {0xD8,0xD9,0xDA,0xDB,0},
+        {0x41,0x42,0x43,0x44,0},
+        {0xE0,0xE1,0xE2,0xE3,0},
+        {0xE8,0xE9,0xEA,0xEB,0},
+        {0xF0,0xF1,0xF2,0xF3,0},
+        {0xF8,0xF9,0xFA,0xFB,0},
+        {0x61,0x62,0x63,0x64,0}
+      },
+      // Black icon
+      {
+        {0x84,0x85,0x86,0x87,0},
+        {0x8C,0x8D,0x8E,0x8F,0},
+        {0x94,0x95,0x96,0x97,0},
+        {0x9C,0x9D,0x9E,0x9F,0},
+        {0x05,0x06,0x07,0x08,0},
+        {0xA4,0xA5,0xA6,0xA7,0},
+        {0xAC,0xAD,0xAE,0xAF,0},
+        {0xB4,0xB5,0xB6,0xB7,0},
+        {0xBC,0xBD,0xBE,0xBF,0},
+        {0x25,0x26,0x27,0x28,0},
+        {0xC4,0xC5,0xC6,0xC7,0},
+        {0xCC,0xCD,0xCE,0xCF,0},
+        {0xD4,0xD5,0xD6,0xD7,0},
+        {0xDC,0xDD,0xDE,0xDF,0},
+        {0x45,0x46,0x47,0x48,0},
+        {0xE4,0xE5,0xE6,0xE7,0},
+        {0xEC,0xED,0xEE,0xEF,0},
+        {0xF4,0xF5,0xF6,0xF7,0},
+        {0xFC,0xFD,0xFE,0xFF,0},
+        {0x65,0x66,0x67,0x68,0}
+      }
+    };
+
+    int rown = 0;
+    int rowc = 0;
+    int rowl = 0;
+    int rowr = 0;
+    int rowa = 0;
+
+    //Set Indicator icon
+    if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 1; } else { rown = 0; }
+    if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowc = 1; } else { rowc = 0; }
+    if (layer_state == L_LOWER) { rowl = 1; }
+    if (layer_state == L_RAISE) { rowr = 1; }
+    if (layer_state == L_ADJUST) { rowa = 1; }
+
+    matrix_write(matrix, indctr[rowl]  [0]);
+    matrix_write(matrix, indctr[rowr]  [1]);
+    matrix_write(matrix, indctr[rowa]  [2]);
+    matrix_write(matrix, indctr[rowc]  [3]);
+    matrix_write(matrix, indctr[rown]  [4]);
+    matrix_write_char(matrix, 0x13);
+    matrix_write(matrix, indctr[rowl]  [5]);
+    matrix_write(matrix, indctr[rowr]  [6]);
+    matrix_write(matrix, indctr[rowa]  [7]);
+    matrix_write(matrix, indctr[rowc]  [8]);
+    matrix_write(matrix, indctr[rown]  [9]);
+    matrix_write_char(matrix, 0x13);
+    matrix_write(matrix, indctr[rowl]  [10]);
+    matrix_write(matrix, indctr[rowr]  [11]);
+    matrix_write(matrix, indctr[rowa]  [12]);
+    matrix_write(matrix, indctr[rowc]  [13]);
+    matrix_write(matrix, indctr[rown]  [14]);
+    matrix_write_char(matrix, 0x13);
+    matrix_write(matrix, indctr[rowl]  [15]);
+    matrix_write(matrix, indctr[rowr]  [16]);
+    matrix_write(matrix, indctr[rowa]  [17]);
+    matrix_write(matrix, indctr[rowc]  [18]);
+    matrix_write(matrix, indctr[rown]  [19]);
+
+  }else{
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);  
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+      } else {
+        layer_off(_LOWER);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+      } else {
+        layer_off(_RAISE);
+      }
+      return false;
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      return false;
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
diff --git a/keyboards/yosino58/keymaps/default/rules.mk b/keyboards/yosino58/keymaps/default/rules.mk
new file mode 100644
index 0000000000..131f5e1f8a
--- /dev/null
+++ b/keyboards/yosino58/keymaps/default/rules.mk
@@ -0,0 +1,30 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/glcdfont.c \
+        ./lib/logo_reader.c \
+        # ./lib/rgb_state_reader.c \
+        # ./lib/layer_state_reader.c \
+        # ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \