[Keyboard] Zen keyboard update for Rev2 (#5522)

* Updated Zen keyboard for rev2 support

* Fixing r1 compile errors

* PR feedback and changes for Proton-C compile errors

6 files changed, 370 insertions, 0 deletions

diff --git a/keyboards/zen/rev2/config.h b/keyboards/zen/rev2/config.h
new file mode 100644
index 0000000000..dc37472f6b
--- /dev/null
+++ b/keyboards/zen/rev2/config.h
@@ -0,0 +1,98 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3061
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Legonut
+#define PRODUCT         "Project Zen"
+#define DESCRIPTION     "Split gaming keyboard"
+
+/* key matrix size */
+// Rows are doubled-up
+
+// wiring of each half
+#ifdef CONVERT_TO_PROTON_C
+  #define MATRIX_ROWS 5
+  #define MATRIX_COLS 7
+#else
+  #define MATRIX_ROWS 10
+  #define MATRIX_COLS 7
+#endif
+
+// Proton-C does pin conversion
+#define MATRIX_ROW_PINS { C6, E6, B5, D7, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B3, B1, B2 }
+
+#define NUMBER_OF_ENCODERS 1
+
+#define ENCODERS_PAD_A  { D4 }
+#define ENCODERS_PAD_B  { D2 }
+
+#define RGB_DI_PIN         B6
+#define SOFT_SERIAL_PIN    D3
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGBLED_NUM 34    // Number of LEDs
+
+// If using 90 Degree rotation, increase block cout
+#ifdef OLED_ROTATE90
+  #define OLED_DISPLAY_CUSTOM
+  #define OLED_DISPLAY_WIDTH 128
+  #define OLED_DISPLAY_HEIGHT 32
+  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
+  #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
+  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed)
+  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
+  #define OLED_SOURCE_MAP { 0, 8, 16, 24 }
+  #define OLED_TARGET_MAP { 24, 16, 8, 0 }
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/zen/rev2/keymaps/debug/keymap.c b/keyboards/zen/rev2/keymaps/debug/keymap.c
new file mode 100644
index 0000000000..e2d3d6a356
--- /dev/null
+++ b/keyboards/zen/rev2/keymaps/debug/keymap.c
@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+#include <stdio.h>
+
+// extern keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { { KC_TRNS } } };
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    static char buf[10] = " ";
+
+    if (record->event.pressed) {
+      snprintf(buf, 10, "C%dR%d ", record->event.key.col, record->event.key.row);
+
+      send_string(buf);
+    }
+    return false;
+
+  return true;
+}
diff --git a/keyboards/zen/rev2/keymaps/default/keymap.c b/keyboards/zen/rev2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..41003e4a55
--- /dev/null
+++ b/keyboards/zen/rev2/keymaps/default/keymap.c
@@ -0,0 +1,117 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _NAV 2
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  NAV,
+
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------.              .-----------------------------------------.
+   * | GESC |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------|              |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |              |   Y  |   U  |   I  |   O  |   P  |   \  |
+   * |------+------+------+------+------+------|              |------+------+------+------+------+------|
+   * |CAPS(NAV)|A  |   S  |   D  |   F  |   G  |              |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+------..------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |RGBPrv||RGBNxt|   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+------||------+------+------+------+------+------+------|
+   * | Ctrl | GUI  | Alt  |RGBTOG| NAV  |Space |Delete||Enter |Space |  NAV |   -  |   =  | PGUP | PGDN |
+   * `----------------------------------+-------------''------------------------------------------------'
+   *                                    |Space |Delete||Enter |Space |
+   *                                    '-------------''-------------'
+   */
+  [_QWERTY] = LAYOUT( \
+    KC_GESC,          KC_1,    KC_2,    KC_3,    KC_4,     KC_5,                       KC_6,     KC_7,     KC_8,    KC_9,    KC_0,    KC_BSPC, \
+    KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,                       KC_Y,     KC_U,     KC_I,    KC_O,    KC_P,    KC_BSLS, \
+    LT(_NAV, KC_CAPS),KC_A,    KC_S,    KC_D,    KC_F,     KC_G,                       KC_H,     KC_J,     KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,     KC_B,    RGB_RMOD,RGB_MOD,  KC_N,     KC_M,     KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+    KC_LCTL,          KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC,  KC_DEL,  KC_ENT,   KC_SPACE, MO(_NAV), KC_MINS, KC_EQL,  KC_PGUP, KC_PGDN, \
+                                                           KC_SPC,  KC_DEL,  KC_ENT,   KC_SPACE \
+  ),
+
+  /* NAV
+   * ,-----------------------------------------.              .-----------------------------------------.
+   * | GESC |   1  |   2  |   3  |   4  |   5  |              |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+------|              |------+------+------+------+------+------|
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |              |   Y  |   U  |   I  |   O  |   P  |   \  |
+   * |------+------+------+------+------+------|              |------+------+------+------+------+------|
+   * |CAPS(NAV)|A  |   S  |   D  |   F  |   G  |              |   H  |   J  |   K  |   L  |   ;  |  "   |
+   * |------+------+------+------+------+------+------..------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |      ||      |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------+------||------+------+------+------+------+------+------|
+   * | Ctrl | GUI  | Alt  |RGBTOG| NAV  |Space |Delete||Enter |Space |  NAV |   -  |   =  | PGUP | PGDN |
+   * `----------------------------------+-------------''------------------------------------------------'
+   *                                    |Space |Delete||Enter |Space |
+   *                                    '-------------''-------------'
+   */
+  [_NAV] = LAYOUT( \
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+    _______, RGB_SAI, RGB_VAI, RGB_SAD, RESET,   KC_LBRC,                   KC_RBRC, KC_PGUP,  KC_UP,   KC_PGDN, KC_INS,  KC_HOME, \
+    _______, RGB_HUD, RGB_VAD, RGB_HUI, _______, _______,                   _______, KC_LEFT,  KC_DOWN, KC_RGHT, KC_DEL,  KC_END,  \
+    KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, KC_MPLY, KC_MPRV, KC_MNXT, \
+    KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, _______, _______, _______, _______, _______, _______,  _______, KC_MUTE, KC_VOLU, KC_VOLD, \
+                                                 _______, _______, _______, _______
+  ),
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_PGDN);
+    } else {
+      tap_code(KC_PGUP);
+    }
+  } else if (index == 1) { /* Second encoder from slave */
+    if (clockwise) {
+      tap_code(KC_UP);
+    } else {
+      tap_code(KC_DOWN);
+    }
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    //case COLEMAK:
+      //if (record->event.pressed) {
+        //set_single_persistent_default_layer(1UL<<_COLEMAK);
+      //}
+      //return false;
+      //break;
+  }
+  return true;
+}
+
+
+#if OLED_DRIVER_ENABLE
+const char* layer_name_user(uint32_t layer) {
+  switch (layer) {
+    case _QWERTY:
+      return PSTR("QWRTY");
+    case _NAV:
+      return PSTR("NAV\n");
+    default:
+      return PSTR("UNDEF");
+  }
+}
+#endif
diff --git a/keyboards/zen/rev2/rev2.c b/keyboards/zen/rev2/rev2.c
new file mode 100644
index 0000000000..4104460db1
--- /dev/null
+++ b/keyboards/zen/rev2/rev2.c
@@ -0,0 +1,66 @@
+#include "rev2.h"
+
+#ifdef OLED_DRIVER_ENABLE
+#include "split_util.h"
+#include "oled_driver.h"
+
+__attribute__((weak))
+void render_logo(void) {
+  static const char PROGMEM sol_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(sol_logo, false);
+}
+
+__attribute__((weak))
+const char* layer_name_user(uint32_t layer) {
+  switch (layer) {
+    default:
+      return PSTR("UNDEF\n");
+  }
+}
+
+__attribute__((weak))
+void render_status(void) {
+  // Setup for 90 degree rendering because it's awesome!
+  // It can house 16 lines of text, with 5 letters each line
+  // Render to mode icon
+  static const char PROGMEM mode_logo[2][4] = {
+    {0x97,0x98,0x0a,0},
+    {0xb7,0xb8,0x0a,0} };
+
+  oled_write_P(mode_logo[0], false); // Line 1
+  oled_write_P(mode_logo[1], false); // Line 2
+
+  // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+  oled_set_cursor(0, 3); // Line 3
+  oled_write_P(PSTR("Layer"), false); // Line 4
+  oled_write_P(layer_name_user(biton32(layer_state)), false);
+
+  // Host Keyboard LED Status
+  uint8_t led_usb_state = host_keyboard_leds();
+  oled_set_cursor(0, OLED_MAX_LINES - 4); // Line 13
+  oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR("     "), false); // Line 14
+  oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR("     "), false); // Line 15
+  oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR("     "), false); // Line 16
+}
+
+#ifdef OLED_ROTATE90
+bool oled_init_user(bool flip180) {
+  return true;
+}
+#endif
+
+__attribute__((weak))
+void oled_task_user(void) {
+  if (is_keyboard_master()) {
+    render_status();
+  } else {
+    render_logo();
+    oled_scroll_left();
+  }
+}
+
+#endif
diff --git a/keyboards/zen/rev2/rev2.h b/keyboards/zen/rev2/rev2.h
new file mode 100644
index 0000000000..101622988d
--- /dev/null
+++ b/keyboards/zen/rev2/rev2.h
@@ -0,0 +1,56 @@
+#pragma once
+
+#include "zen.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+    #include <avr/io.h>
+    #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifdef CONVERT_TO_PROTON_C
+  #define LAYOUT( \
+      k00, k01, k02, k03, k04, k05,             k55, k54, k53, k52, k51, k50, \
+      k10, k11, k12, k13, k14, k15,             k65, k64, k63, k62, k61, k60, \
+      k20, k21, k22, k23, k24, k25,             k75, k74, k73, k72, k71, k70, \
+      k30, k31, k32, k33, k34, k35, k16,   k66, k85, k84, k83, k82, k81, k80, \
+      k40, k41, k42, k43, k44, k36, k26,   k76, k86, k94, k93, k92, k91, k90, \
+                               k45, k46,   k96, k95 \
+      ) \
+      { \
+          { k00, k01, k02, k03, k04, k05, KC_NO }, \
+          { k10, k11, k12, k13, k14, k15, k16 }, \
+          { k20, k21, k22, k23, k24, k25, k26 }, \
+          { k30, k31, k32, k33, k34, k35, k36 }, \
+          { k40, k41, k42, k43, k44, k45, k46 } \
+      }
+#else
+  #define LAYOUT( \
+      k00, k01, k02, k03, k04, k05,             k55, k54, k53, k52, k51, k50, \
+      k10, k11, k12, k13, k14, k15,             k65, k64, k63, k62, k61, k60, \
+      k20, k21, k22, k23, k24, k25,             k75, k74, k73, k72, k71, k70, \
+      k30, k31, k32, k33, k34, k35, k16,   k66, k85, k84, k83, k82, k81, k80, \
+      k40, k41, k42, k43, k44, k36, k26,   k76, k86, k94, k93, k92, k91, k90, \
+                               k45, k46,   k96, k95 \
+      ) \
+      { \
+          { k00, k01, k02, k03, k04, k05, KC_NO }, \
+          { k10, k11, k12, k13, k14, k15, k16 }, \
+          { k20, k21, k22, k23, k24, k25, k26 }, \
+          { k30, k31, k32, k33, k34, k35, k36 }, \
+          { k40, k41, k42, k43, k44, k45, k46 }, \
+          { k50, k51, k52, k53, k54, k55, KC_NO }, \
+          { k60, k61, k62, k63, k64, k65, k66 }, \
+          { k70, k71, k72, k73, k74, k75, k76 }, \
+          { k80, k81, k82, k83, k84, k85, k86 }, \
+          { k90, k91, k92, k93, k94, k95, k96 } \
+      }
+#endif
diff --git a/keyboards/zen/rev2/rules.mk b/keyboards/zen/rev2/rules.mk
new file mode 100644
index 0000000000..d1fe410525
--- /dev/null
+++ b/keyboards/zen/rev2/rules.mk
@@ -0,0 +1,14 @@
+ENCODER_ENABLE = yes
+
+OLED_DRIVER_ENABLE = no
+OLED_ROTATE90 = yes
+
+# Setup so that OLED and 90 degree rotation can be turned on/off easily
+# with "OLED_DRIVER_ENABLE = yes" or "OLED_ROTATE90 = no" in user's rules.mk file
+ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+  # Custom local font file
+  OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
+  ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+    OPT_DEFS += -DOLED_ROTATE90
+  endif
+endif