Keyboard: Adding Z-150 PCB firmware (#3793)

* Adding the AT101 PCB firmware

* Fixed AT101 keymap error

* Fixing AT101 firmware

* More Fixes for AT101 firmware

* Rename AT101_Blackheart.c to at101_blackheart.c

* Rename AT101_Blackheart.h to at101_blackheart.h

* Update readme.md

* Renaming AT101 folder pt1

* Renaming AT101 folder pt2

* Fixing AT101 LED function name

* Redoing AT101 folder naming pt2

Last round had issues, should be the last rename.

* Fixing missing comma in at101_blackheart.h

* Adding Z-150 PCB

* Adding Z-150 readme file

* Fixing Z-150 firmware errors

* Fixing Z-150 layout error

* Fixing Z-150 firmware errors

* Fixing Z-150 Issues

Still unsure where the extra "\" is that through the error.

* Fixing more Z-150 errors

* Finally fixing the Z-150 error

* Fixed Z-150 layout naming

* Removed Z-150 layout fillers

6 files changed, 228 insertions, 0 deletions

diff --git a/keyboards/z150_blackheart/config.h b/keyboards/z150_blackheart/config.h
new file mode 100644
index 0000000000..d2fce9aeef
--- /dev/null
+++ b/keyboards/z150_blackheart/config.h
@@ -0,0 +1,52 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    blindassassin111
+#define PRODUCT         Z-150 PCB
+#define DESCRIPTION     Replacement for Zenith Z-150 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 20
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C3, C2, C1, C0, E1 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D7, E0, C7, C6, C5, C4, F0, F1, F2, F3, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* force n-key rollover*/
+#define FORCE_NKRO
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
\ No newline at end of file
diff --git a/keyboards/z150_blackheart/keymaps/default/keymap.c b/keyboards/z150_blackheart/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e93802052a
--- /dev/null
+++ b/keyboards/z150_blackheart/keymaps/default/keymap.c
@@ -0,0 +1,69 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_F1, 	KC_F2,  	KC_ESC,  KC_1,   KC_2, 	KC_3,    KC_4, 	KC_5, 	KC_6, 	KC_7, 	KC_8, 	KC_9,  KC_0, 	KC_MINS, KC_EQL,  KC_BSPC, 		KC_NLCK, 	KC_SLCK, 	MO(1), 
+		KC_F3, 	KC_F4,  	KC_TAB,  KC_Q,   KC_W, 	KC_E,    KC_R, 	KC_T, 	KC_Y, 	KC_U, 	KC_I, 	KC_O,  KC_P, 	KC_LBRC, KC_RBRC, KC_ENT,		KC_P7,   KC_P8,   KC_P9, 	KC_PAST,
+		KC_F5, 	KC_F6,  	KC_LCTRL,KC_A,   KC_S, 	KC_D,    KC_F, 	KC_G, 	KC_H, 	KC_J, 	KC_K, 	KC_L,  KC_SCLN, KC_QUOT,   						KC_P4, 	 KC_P5,   KC_P6, 	KC_PMNS,
+		KC_F7, 	KC_F8,  	KC_LSFT, KC_Z,   KC_X, 	KC_C,    KC_V, 	KC_B, 	KC_N, 	KC_M, 	KC_COMM,KC_DOT,KC_SLSH, KC_RSFT, KC_BSLS, 				KC_P1,   KC_P2,   KC_P3,    KC_PPLS,
+		KC_F9, 	KC_F10, 	KC_LALT, KC_GRV, 							KC_SPC, 					 		 				 KC_CAPS, 					KC_P0,   KC_PDOT
+		),
+
+	LAYOUT(
+		_______, _______, 	 RESET,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		_______, 	_______,  _______, 
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		_______, _______, _______, _______,
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 				 		_______, _______, _______, _______,
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 		 		_______, _______, _______, _______,
+		_______, _______, 	_______, _______, 								_______, 										_______,				 				_______,  	_______
+		),
+
+	LAYOUT_z150_tkl(
+		KC_F1, 	KC_F2, 		KC_ESC,  KC_1, 	  KC_2,   KC_3, 	 KC_4, 	KC_5, 	KC_6, KC_7, KC_8, 	 KC_9, 	 KC_0, 	  KC_MINS, KC_EQL, 	KC_BSPC, 		KC_INS,  KC_HOME, KC_PGUP, 
+		KC_F3, 	KC_F4, 		KC_TAB,  KC_Q, 	  KC_W,   KC_E, 	 KC_R, 	KC_T, 	KC_Y, KC_U, KC_I, 	 KC_O, 	 KC_P, 	  KC_LBRC, KC_RBRC, KC_BSLS, 		KC_DEL,  KC_END,  KC_PGDN, 
+		KC_F5, 	KC_F6, 		KC_CAPS, KC_A, 	  KC_S,   KC_D, 	 KC_F, 	KC_G, 	KC_H, KC_J, KC_K, 	 KC_L, 	 KC_SCLN, KC_QUOT, KC_ENT, 			 		XXXXXXX, XXXXXXX, XXXXXXX, 
+		KC_F7, 	KC_F8, 		KC_LSFT, KC_BSLS, KC_Z,   KC_X,      KC_C, 	KC_V, 	KC_B, KC_N, KC_M,    KC_COMM,KC_DOT,  KC_SLSH, KC_RSFT, MO(1), 			XXXXXXX, KC_UP,   XXXXXXX, 
+		KC_F9, 	KC_F10,		KC_LCTL, KC_LGUI, KC_LALT,		 		KC_SPC, 							 KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, 			KC_LEFT, KC_DOWN, KC_RGHT
+		),
+
+	LAYOUT_z150_tkl(
+		_______, _______, 	 RESET,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 			_______, _______, _______, 
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 			_______, _______, _______, 
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 					_______, _______, _______, 
+		_______, _______, 	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 					_______, _______, _______, 
+		_______, _______, 	_______, _______, _______, _______, 		_______,                            		_______, _______, _______, _______, 			_______, _______, _______
+		),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  DDRB |= (1 << 0);
+  DDRE |= (1 << 6) | (1 << 7);
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    PORTE |= (1 << 7);
+  } else {
+    PORTE &= ~(1 << 7);
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    PORTB |= (1 << 0);
+  } else {
+    PORTB &= ~(1 << 0);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+    PORTE |= (1 << 6);
+  } else {
+    PORTE &= ~(1 << 6);
+  }
+}
\ No newline at end of file
diff --git a/keyboards/z150_blackheart/readme.md b/keyboards/z150_blackheart/readme.md
new file mode 100644
index 0000000000..5e87b6c8f3
--- /dev/null
+++ b/keyboards/z150_blackheart/readme.md
@@ -0,0 +1,14 @@
+Z-150 Blackheart PCB
+===
+
+A replacement PCB for Zenith Z-150 keyboards.
+
+Keyboard Maintainer: QMK Community and blindassassin111  
+Hardware Supported: Z-150 blackheart PCB  
+Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make z150_blackheart:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/z150_blackheart/rules.mk b/keyboards/z150_blackheart/rules.mk
new file mode 100644
index 0000000000..b258bf35fd
--- /dev/null
+++ b/keyboards/z150_blackheart/rules.mk
@@ -0,0 +1,58 @@
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Boot Section Size in *bytes*
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
\ No newline at end of file
diff --git a/keyboards/z150_blackheart/z150_blackheart.c b/keyboards/z150_blackheart/z150_blackheart.c
new file mode 100644
index 0000000000..10f388cf62
--- /dev/null
+++ b/keyboards/z150_blackheart/z150_blackheart.c
@@ -0,0 +1 @@
+#include "z150_blackheart.h"
diff --git a/keyboards/z150_blackheart/z150_blackheart.h b/keyboards/z150_blackheart/z150_blackheart.h
new file mode 100644
index 0000000000..baf187fd2d
--- /dev/null
+++ b/keyboards/z150_blackheart/z150_blackheart.h
@@ -0,0 +1,34 @@
+#ifndef z150_blackheart_H
+#define z150_blackheart_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, 	K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, 	K016, 	 K017, K019, \
+	K100, K101, 	K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, 	K116, K117, K118, K119, \
+	K200, K201, 	K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       			K215, K216, K217, K218, \
+	K300, K301, 	K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, 			K315, K316, K317, K318, \
+	K400, K401, 	K402, K403, 			      K407,                          			   K414,	   		K415,	   K417 \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  KC_NO, K019 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118,  K119 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215,  K216,  K217,  K218,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318,  KC_NO }, \
+	{ K400,  K401,  K402,  K403,  KC_NO, KC_NO, KC_NO, K407,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,  K414,  K415, KC_NO, K417,  KC_NO, KC_NO }  \
+}
+
+#define LAYOUT_z150_tkl( \
+	K000, K001, 	K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015,       K017, K018, K019, \
+	K100, K101, 	K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115,       K117, K118, K119, \
+	K200, K201, 	K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,       	  K216, K217, K218, \
+	K300, K301, 	K302, K405, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314,       K316, K317, K318, \
+	K400, K401, 	K402, K403, K404, 	          K407,                         K412, K413, K414, K415, 	  K416, K417, K418  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  KC_NO, K017,  K018,  K019 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  KC_NO, K117,  K118,  K119 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  KC_NO, K216,  K217,  K218,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  KC_NO, K316,  K317,  K318,  KC_NO }, \
+	{ K400,  K401,  K402,  K403,  K404,  K405,  KC_NO, K407,  KC_NO, KC_NO, KC_NO, KC_NO, K412,  K413,  K414,  K415,  K416,  K417,  K418,  KC_NO }  \
+}
+
+#endif
\ No newline at end of file