diff options
| author | Jack Humbert <jack.humb@gmail.com> | 2017-11-27 23:08:21 -0500 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2017-11-27 23:08:21 -0500 |
| commit | 9fdc27626097ae03b767a09427efc90475d90955 (patch) | |
| tree | a555c38f1b714af6e2c2c96187552757d08224b9 /keyboards | |
| parent | 9113f3387a670373919fe62899b0ab27e9d89eba (diff) | |
| download | qmk_firmware-9fdc27626097ae03b767a09427efc90475d90955.tar.gz qmk_firmware-9fdc27626097ae03b767a09427efc90475d90955.zip | |
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
Diffstat (limited to 'keyboards')
64 files changed, 225 insertions, 432 deletions
diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index 0a254d0e79..2c8418beb7 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -5,7 +5,6 @@ ifdef TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif @@ -27,7 +26,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -47,19 +45,20 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifdef TEENSY2 + BOOTLOADER = halfkay +else + BOOTLOADER = caterina +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h index 90a4aa05a6..8d9248947c 100644 --- a/keyboards/atreus62/config.h +++ b/keyboards/atreus62/config.h @@ -38,8 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk index ca399e9c56..66f6660c6e 100644 --- a/keyboards/atreus62/rules.mk +++ b/keyboards/atreus62/rules.mk @@ -35,18 +35,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index c52d9175b8..c0e0face5a 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -41,7 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index d089858273..9165de4248 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/bmini/config.h b/keyboards/bmini/config.h index 90b315b7c5..b7a25e050e 100644 --- a/keyboards/bmini/config.h +++ b/keyboards/bmini/config.h @@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/bmini/rules.mk b/keyboards/bmini/rules.mk index 41a87973d4..73c361e2a8 100644 --- a/keyboards/bmini/rules.mk +++ b/keyboards/bmini/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index 098bf28fa5..4f95949f9f 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -45,19 +44,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index c951780e20..16090962d9 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -1,4 +1,3 @@ BLUETOOTH = AdafruitBLE ADAFRUIT_BLE_ENABLE = yes -OPT_DEFS += -DCATERINA_BOOTLOADER F_CPU = 8000000 diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk index b0e07c7649..7a8f24bb49 100644 --- a/keyboards/converter/usb_usb/rules.mk +++ b/keyboards/converter/usb_usb/rules.mk @@ -43,19 +43,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk index e345d61f56..2a13dbdfc6 100644 --- a/keyboards/deltasplit75/rules.mk +++ b/keyboards/deltasplit75/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h index b677d09aa9..319a149fbc 100644 --- a/keyboards/deltasplit75/v2/config.h +++ b/keyboards/deltasplit75/v2/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } #define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/dichotemy/rules.mk b/keyboards/dichotemy/rules.mk index c8a316f843..4e9db86875 100644 --- a/keyboards/dichotemy/rules.mk +++ b/keyboards/dichotemy/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DDICHOTEMY_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -25,8 +24,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - -# # LUFA specific # # Target architecture (see library "Board Types" documentation). @@ -45,19 +42,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h index 99b057496f..f6b78631ea 100644 --- a/keyboards/eco/config.h +++ b/keyboards/eco/config.h @@ -31,8 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 4 #define MATRIX_COLS 14 -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk index 6f4b4fefc4..35ee906b1e 100644 --- a/keyboards/eco/rules.mk +++ b/keyboards/eco/rules.mk @@ -34,18 +34,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk index 3d6b18fea9..4d2c461085 100644 --- a/keyboards/ergodox_ez/rules.mk +++ b/keyboards/ergodox_ez/rules.mk @@ -54,18 +54,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = halfkay + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - # If you have Left LEDs (see # https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for # details), include the following define: diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h index 9c9f038389..bb59ec213d 100644 --- a/keyboards/gherkin/keymaps/mjt/config.h +++ b/keyboards/gherkin/keymaps/mjt/config.h @@ -52,8 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } -#define CATERINA_BOOTLOADER - #define UNUSED_PINS /* COL2ROW or ROW2COL */ diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk index 6bb9edb35a..530898bd78 100644 --- a/keyboards/gherkin/rules.mk +++ b/keyboards/gherkin/rules.mk @@ -33,14 +33,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/handwired/MS_sculpt_mobile/rules.mk b/keyboards/handwired/MS_sculpt_mobile/rules.mk index 53769f81f4..680c057d36 100644 --- a/keyboards/handwired/MS_sculpt_mobile/rules.mk +++ b/keyboards/handwired/MS_sculpt_mobile/rules.mk @@ -5,21 +5,29 @@ SRC= babblePaste.c ifdef ASTAR CFLAGS=-D ASTAR - OPT_DEFS += -DBOOTLOADER_SIZE=4096 MCU = atmega32u4 - OPT_DEFS += -DCATERINA_BOOTLOADER SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) else MCU = at90usb1286 - OPT_DEFS += -DBOOTLOADER_SIZE=2048 SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex endif F_CPU = 16000000 ARCH = AVR8 F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifdef ASTAR + BOOTLOADER = caterina +else + BOOTLOADER = atmel-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index 4929968410..00ca06dd40 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -36,30 +36,25 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) - +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. ifdef TEENSY2 + BOOTLOADER = halfkay OPT_DEFS += -DATREUS_TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else + BOOTLOADER = caterina OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# MCU name - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change yes to no to disable diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h index 88cc5ad00e..9c9361ced7 100644 --- a/keyboards/handwired/space_oddity/config.h +++ b/keyboards/handwired/space_oddity/config.h @@ -11,8 +11,6 @@ #define PRODUCT Space Odyssey #define DESCRIPTION Keyboard -#define CATERINA_BOOTLOADER - #define MOUSEKEY_INTERVAL 16 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 60 diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index 170c64a30e..4dc93fad9e 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -33,14 +33,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk index 62f94b9452..8568def354 100644 --- a/keyboards/handwired/traveller/rules.mk +++ b/keyboards/handwired/traveller/rules.mk @@ -37,15 +37,23 @@ ARCH = AVR8 F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. ifdef TEENSY2 + BOOTLOADER = halfkay OPT_DEFS += -DATREUS_TEENSY2 ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else + BOOTLOADER = caterina OPT_DEFS += -DATREUS_ASTAR - OPT_DEFS += -DCATERINA_BOOTLOADER ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif + + + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 39a466850e..b2eb7020fc 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -53,8 +53,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 -#define CATERINA_BOOTLOADER - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 diff --git a/keyboards/handwired/woodpad/rules.mk b/keyboards/handwired/woodpad/rules.mk index 7612f4b49c..11f096581e 100644 --- a/keyboards/handwired/woodpad/rules.mk +++ b/keyboards/handwired/woodpad/rules.mk @@ -35,19 +35,16 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/iris/rev1/config.h b/keyboards/iris/rev1/config.h index 10f435a4fc..c9bc625289 100644 --- a/keyboards/iris/rev1/config.h +++ b/keyboards/iris/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/iris/rev2/config.h b/keyboards/iris/rev2/config.h index 4ba21a58a6..290fba4502 100644 --- a/keyboards/iris/rev2/config.h +++ b/keyboards/iris/rev2/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/iris/rules.mk b/keyboards/iris/rules.mk index 0280e9d1a6..db4bf3a1e4 100644 --- a/keyboards/iris/rules.mk +++ b/keyboards/iris/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 42a37c957f..02339a33f7 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -38,7 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TOGGLE 3 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/jj40/program b/keyboards/jj40/program deleted file mode 100755 index 81552c2723..0000000000 --- a/keyboards/jj40/program +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/env python -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -from __future__ import print_function - -import os -import sys -import time -import usb - -if len(sys.argv) < 2: - print('Usage: %s <firmware.hex>' % sys.argv[0]) - sys.exit(1) - -print('Searching for jj40... ', end='') - -dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D) -if dev is None: - raise ValueError('Device not found') - -print('Found', end='\n\n') - -print('Device Information:') -print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) -print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) -print('Manufacturer: %s' % (dev.iManufacturer)) -print('Serial: %s' % (dev.iSerialNumber)) -print('Product: %s' % (dev.iProduct), end='\n\n') - -print('Transferring control to bootloader... ', end='') - -dev.set_configuration() - -request_type = usb.util.build_request_type( - usb.util.CTRL_OUT, - usb.util.CTRL_TYPE_CLASS, - usb.util.CTRL_RECIPIENT_DEVICE) - -USBRQ_HID_SET_REPORT = 0x09 -HID_REPORT_OPTION = 0x0301 - - -try: - dev.ctrl_transfer( - request_type, - USBRQ_HID_SET_REPORT, - HID_REPORT_OPTION, - 0, - [0, 0, 0xFF] + [0] * 5 - ) -except usb.core.USBError: - # for some reason I keep getting USBError, but it works! - pass - -# wait a bit until bootloader starts up -time.sleep(2) - -print('OK') -print('Programming...') -if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0: - print('\nDone!') diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index c39ebf2225..c6279a2a51 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no @@ -39,11 +45,10 @@ KEY_LOCK_ENABLE = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c # programming options -PROGRAM_CMD = ./keyboards/jj40/program $(TARGET).hex +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index 7c128421dd..73f90e715d 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -39,9 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } // #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order - -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index 1f0603d501..1c48f38e05 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -39,8 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 1bbc0367fa..f9dc127bc6 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -40,18 +40,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 0543e8930d..70ebcb8c23 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -39,8 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6} // #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rev1/config.h b/keyboards/levinson/rev1/config.h index 7c8b9b0b92..ddccbc47a9 100644 --- a/keyboards/levinson/rev1/config.h +++ b/keyboards/levinson/rev1/config.h @@ -38,8 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D7, E6, B4, B5 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 } -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rev2/config.h b/keyboards/levinson/rev2/config.h index 27d451a3b2..51ae5cd3c7 100644 --- a/keyboards/levinson/rev2/config.h +++ b/keyboards/levinson/rev2/config.h @@ -38,9 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, D7, E6, B4 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } - -#define CATERINA_BOOTLOADER - /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/levinson/rules.mk b/keyboards/levinson/rules.mk index 0ca19e9a00..8e67497f4b 100644 --- a/keyboards/levinson/rules.mk +++ b/keyboards/levinson/rules.mk @@ -40,18 +40,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/mechmini/config.h b/keyboards/mechmini/config.h index 96f4bb51e4..e7004608e1 100644 --- a/keyboards/mechmini/config.h +++ b/keyboards/mechmini/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGB_DI_PIN E2 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/mechmini/rules.mk b/keyboards/mechmini/rules.mk index d089858273..ed55ae1c43 100644 --- a/keyboards/mechmini/rules.mk +++ b/keyboards/mechmini/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h index 9799c41994..b7272bdb05 100644 --- a/keyboards/minidox/rev1/config.h +++ b/keyboards/minidox/rev1/config.h @@ -26,8 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { B2, B6, B4, B5 } #define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } -#define CATERINA_BOOTLOADER - #define USE_SERIAL //#define EE_HANDS diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk index 0f9d303105..0c3a03bd73 100644 --- a/keyboards/minidox/rules.mk +++ b/keyboards/minidox/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk index 903edb1092..0db144ed32 100644 --- a/keyboards/mitosis/rules.mk +++ b/keyboards/mitosis/rules.mk @@ -1,6 +1,5 @@ OPT_DEFS += -DMITOSIS_PROMICRO -OPT_DEFS += -DCATERINA_BOOTLOADER MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) @@ -25,7 +24,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - # # LUFA specific # @@ -45,19 +43,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index 394cc78981..6c82b2c74f 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -44,7 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_VAL_STEP 18 #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 #define TAPPING_TERM 200 diff --git a/keyboards/mt40/program b/keyboards/mt40/program deleted file mode 100755 index e8786f566d..0000000000 --- a/keyboards/mt40/program +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/env python2.7 -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -from __future__ import print_function - -import os -import sys -import time -import usb - -if len(sys.argv) < 2: - print('Usage: %s <firmware.hex>' % sys.argv[0]) - sys.exit(1) - -print('Searching for planck clone keyboard... ', end='') - -dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D) -if dev is None: - raise ValueError('Device not found') - -print('Found', end='\n\n') - -print('Device Information:') -print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) -print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) -print('Manufacturer: %s' % (dev.iManufacturer)) -print('Serial: %s' % (dev.iSerialNumber)) -print('Product: %s' % (dev.iProduct), end='\n\n') - -print('Transferring control to bootloader... ', end='') - -dev.set_configuration() - -request_type = usb.util.build_request_type( - usb.util.CTRL_OUT, - usb.util.CTRL_TYPE_CLASS, - usb.util.CTRL_RECIPIENT_DEVICE) - -USBRQ_HID_SET_REPORT = 0x09 -HID_REPORT_OPTION = 0x0301 - - -try: - dev.ctrl_transfer( - request_type, - USBRQ_HID_SET_REPORT, - HID_REPORT_OPTION, - 0, - [0, 0, 0xFF] + [0] * 5 - ) -except usb.core.USBError: - # for some reason I keep getting USBError, but it works! - pass - -# wait a bit until bootloader starts up -time.sleep(2) - -print('OK') -print('Programming...') -if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0: - print('\nDone!') diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 10023da0ee..9d230d2388 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -9,6 +9,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) @@ -26,11 +32,10 @@ RGBLIGHT_CUSTOM_DRIVER = yes TAP_DANCE_ENABLE = no OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c # programming options -PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex +PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/nyquist/rev1/config.h b/keyboards/nyquist/rev1/config.h index 3615768871..4430f254cb 100644 --- a/keyboards/nyquist/rev1/config.h +++ b/keyboards/nyquist/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk index f2bc59cc5d..971cd188a8 100644 --- a/keyboards/nyquist/rules.mk +++ b/keyboards/nyquist/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index 26715f4096..d6564f281c 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -51,8 +51,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 } /*/ -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index 48d6551bc7..d7ea0d49dc 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 99a93ee798..47a732f768 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -27,7 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DESCRIPTION 40% keyboard #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index d089858273..9165de4248 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index 02c39c43a0..1225a5d28d 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -4,6 +4,4 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700) NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -OPT_DEFS += -DBOOTLOADER_SIZE=8192 - MCU = at90usb1286
\ No newline at end of file diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk index 9ecde59583..e51af55c66 100644 --- a/keyboards/planck/rev3/rules.mk +++ b/keyboards/planck/rev3/rules.mk @@ -1,10 +1 @@ - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk index 0001fb50f7..7e64e7edc4 100644 --- a/keyboards/planck/rev4/rules.mk +++ b/keyboards/planck/rev4/rules.mk @@ -1,9 +1 @@ -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk index 29eae4b495..3b22e0a01b 100644 --- a/keyboards/planck/rev5/rules.mk +++ b/keyboards/planck/rev5/rules.mk @@ -1,9 +1 @@ -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - AUDIO_ENABLE = yes # Audio output on port C6
\ No newline at end of file diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 1fed5fa58a..439f7db645 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -34,6 +34,23 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifeq ($(strip $(KEYBOARD)), planck/rev3) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/rev4) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/rev5) + BOOTLOADER = qmk-dfu +endif +ifeq ($(strip $(KEYBOARD)), planck/light) + BOOTLOADER = qmk-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT @@ -46,9 +63,9 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = yes # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index acef4d9713..60087e9785 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -36,18 +36,20 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +ifeq ($(strip $(KEYBOARD)), preonic/rev1) + BOOTLOADER = atmel-dfu +endif +ifeq ($(strip $(KEYBOARD)), preonic/rev2) + BOOTLOADER = qmk-dfu +endif + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h index 57ec985193..f62de1653a 100644 --- a/keyboards/ps2avrGB/config.h +++ b/keyboards/ps2avrGB/config.h @@ -27,7 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk index 9e76993c4a..c7c12dcf17 100644 --- a/keyboards/ps2avrGB/rules.mk +++ b/keyboards/ps2avrGB/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/viterbi/rev1/config.h b/keyboards/viterbi/rev1/config.h index 68ca5f3626..3400ea31a1 100644 --- a/keyboards/viterbi/rev1/config.h +++ b/keyboards/viterbi/rev1/config.h @@ -37,8 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } -#define CATERINA_BOOTLOADER - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/viterbi/rules.mk b/keyboards/viterbi/rules.mk index 8a1b94013e..1f77c63741 100644 --- a/keyboards/viterbi/rules.mk +++ b/keyboards/viterbi/rules.mk @@ -39,18 +39,15 @@ ARCH = AVR8 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index cdc403d5e2..e0a2aa1383 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -35,7 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_ANIMATIONS #define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 /* key combination for command */ #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk index 9e76993c4a..c7c12dcf17 100644 --- a/keyboards/ymd96/rules.mk +++ b/keyboards/ymd96/rules.mk @@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes # processor frequency F_CPU = 12000000 +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + # build options BOOTMAGIC_ENABLE = yes MOUSEKEY_ENABLE = yes @@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup CUSTOM_MATRIX = yes |