Normalize line endings

21 files changed, 3204 insertions, 3204 deletions

diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
index 31319ef575..2809c9d184 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
@@ -1,49 +1,49 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config =

-{

-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

-};

-#endif

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-void __early_init(void) {

-

-  stm32_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-void boardInit(void) {

-}

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
index 7253e77826..b31d74307b 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
@@ -1,166 +1,166 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for a Generic STM32F103 board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_GENERIC_STM32_F103

-#define BOARD_NAME              "Generic STM32F103x board"

-

-/*

- * Board frequencies.

- */

-#define STM32_LSECLK            32768

-#define STM32_HSECLK            8000000

-

-/*

- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

- */

-#define STM32F103xB

-

-/*

- * IO pins assignments

- */

-

-/* on-board */

-

-#define GPIOC_LED               13

-#define GPIOD_OSC_IN            0

-#define GPIOD_OSC_OUT           1

-

-/* In case your board has a "USB enable" hardware

-   controlled by a pin, define it here. (It could be just

-   a 1.5k resistor connected to D+ line.)

-*/

-/*

-#define GPIOB_USB_DISC          10

-*/

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- *

- * The digits have the following meaning:

- *   0 - Analog input.

- *   1 - Push Pull output 10MHz.

- *   2 - Push Pull output 2MHz.

- *   3 - Push Pull output 50MHz.

- *   4 - Digital input.

- *   5 - Open Drain output 10MHz.

- *   6 - Open Drain output 2MHz.

- *   7 - Open Drain output 50MHz.

- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

- *   9 - Alternate Push Pull output 10MHz.

- *   A - Alternate Push Pull output 2MHz.

- *   B - Alternate Push Pull output 50MHz.

- *   C - Reserved.

- *   D - Alternate Open Drain output 10MHz.

- *   E - Alternate Open Drain output 2MHz.

- *   F - Alternate Open Drain output 50MHz.

- * Please refer to the STM32 Reference Manual for details.

- */

-

-/*

- * Port A setup.

- * Everything input with pull-up except:

- * PA2  - Alternate output  (USART2 TX).

- * PA3  - Normal input      (USART2 RX).

- * PA9  - Alternate output  (USART1 TX).

- * PA10 - Normal input      (USART1 RX).

- */

-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */

-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */

-#define VAL_GPIOAODR            0xFFFFFFFF

-

-/*

- * Port B setup.

- * Everything input with pull-up except:

- * PB10    - Push Pull output  (USB switch).

- */

-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */

-#define VAL_GPIOBODR            0xFFFFFFFF

-

-/*

- * Port C setup.

- * Everything input with pull-up except:

- * PC13    - Push Pull output  (LED).

- */

-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */

-#define VAL_GPIOCODR            0xFFFFFFFF

-

-/*

- * Port D setup.

- * Everything input with pull-up except:

- * PD0  - Normal input (XTAL).

- * PD1  - Normal input (XTAL).

- */

-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

-#define VAL_GPIODODR            0xFFFFFFFF

-

-/*

- * Port E setup.

- * Everything input with pull-up except:

- */

-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

-#define VAL_GPIOEODR            0xFFFFFFFF

-

-/*

- * USB bus activation macro, required by the USB driver.

- */

-/* The point is that most of the generic STM32F103* boards

-   have a 1.5k resistor connected on one end to the D+ line

-   and on the other end to some pin. Or even a slightly more

-   complicated "USB enable" circuit, controlled by a pin.

-   That should go here.

-

-   However on some boards (e.g. one that I have), there's no

-   such hardware. In which case it's better to not do anything.

-*/

-/*

-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)

-*/

-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);

-

-/*

- * USB bus de-activation macro, required by the USB driver.

- */

-/*

-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)

-*/

-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for a Generic STM32F103 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F103
+#define BOARD_NAME              "Generic STM32F103x board"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ */
+
+/* on-board */
+
+#define GPIOC_LED               13
+#define GPIOD_OSC_IN            0
+#define GPIOD_OSC_OUT           1
+
+/* In case your board has a "USB enable" hardware
+   controlled by a pin, define it here. (It could be just
+   a 1.5k resistor connected to D+ line.)
+*/
+/*
+#define GPIOB_USB_DISC          10
+*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA9  - Alternate output  (USART1 TX).
+ * PA10 - Normal input      (USART1 RX).
+ */
+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB10    - Push Pull output  (USB switch).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC13    - Push Pull output  (LED).
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+/* The point is that most of the generic STM32F103* boards
+   have a 1.5k resistor connected on one end to the D+ line
+   and on the other end to some pin. Or even a slightly more
+   complicated "USB enable" circuit, controlled by a pin.
+   That should go here.
+
+   However on some boards (e.g. one that I have), there's no
+   such hardware. In which case it's better to not do anything.
+*/
+/*
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+/*
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
+*/
+#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
index d692c0ee46..48e0e51fe6 100644
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
@@ -1,5 +1,5 @@
-# List of all the board related files.

-BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c

-

-# Required include directories

-BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103

+# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld
index fb141f888c..c4ca8b874c 100644
--- a/keyboards/chibios_test/ld/MKL26Z64.ld
+++ b/keyboards/chibios_test/ld/MKL26Z64.ld
@@ -1,105 +1,105 @@
-/*

- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com

- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>

- *

- * Permission is hereby granted, free of charge, to any person obtaining

- * a copy of this software and associated documentation files (the "Software"),

- * to deal in the Software without restriction, including without limitation

- * the rights to use, copy, modify, merge, publish, distribute, sublicense,

- * and/or sell copies of the Software, and to permit persons to whom the

- * Software is furnished to do so, subject to the following conditions:

- *

- * The above copyright notice and this permission notice shall be included in

- * all copies or substantial portions of the Software.

- *

- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

- * SOFTWARE.

- */

-

-/*

- * KL26Z64 memory setup.

- */

-MEMORY

-{

-  flash0   : org = 0x00000000, len = 0x100

-  flash1   : org = 0x00000400, len = 0x10

-  flash2   : org = 0x00000410, len = 62k - 0x410

-  flash3   : org = 0x0000F800, len = 2k

-  flash4   : org = 0x00000000, len = 0

-  flash5   : org = 0x00000000, len = 0

-  flash6   : org = 0x00000000, len = 0

-  flash7   : org = 0x00000000, len = 0

-  ram0     : org = 0x1FFFF800, len = 8k

-  ram1     : org = 0x00000000, len = 0

-  ram2     : org = 0x00000000, len = 0

-  ram3     : org = 0x00000000, len = 0

-  ram4     : org = 0x00000000, len = 0

-  ram5     : org = 0x00000000, len = 0

-  ram6     : org = 0x00000000, len = 0

-  ram7     : org = 0x00000000, len = 0

-}

-

-/* Flash region for the configuration bytes.*/

-SECTIONS

-{

-  .cfmprotect : ALIGN(4) SUBALIGN(4)

-  {

-    KEEP(*(.cfmconfig))

-  } > flash1

-}

-

-/* For each data/text section two region are defined, a virtual region

-   and a load region (_LMA suffix).*/

-

-/* Flash region to be used for exception vectors.*/

-REGION_ALIAS("VECTORS_FLASH", flash0);

-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for constructors and destructors.*/

-REGION_ALIAS("XTORS_FLASH", flash2);

-REGION_ALIAS("XTORS_FLASH_LMA", flash2);

-

-/* Flash region to be used for code text.*/

-REGION_ALIAS("TEXT_FLASH", flash2);

-REGION_ALIAS("TEXT_FLASH_LMA", flash2);

-

-/* Flash region to be used for read only data.*/

-REGION_ALIAS("RODATA_FLASH", flash2);

-REGION_ALIAS("RODATA_FLASH_LMA", flash2);

-

-/* Flash region to be used for various.*/

-REGION_ALIAS("VARIOUS_FLASH", flash2);

-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);

-

-/* Flash region to be used for RAM(n) initialization data.*/

-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);

-

-/* RAM region to be used for Main stack. This stack accommodates the processing

-   of all exceptions and interrupts.*/

-REGION_ALIAS("MAIN_STACK_RAM", ram0);

-

-/* RAM region to be used for the process stack. This is the stack used by

-   the main() function.*/

-REGION_ALIAS("PROCESS_STACK_RAM", ram0);

-

-/* RAM region to be used for data segment.*/

-REGION_ALIAS("DATA_RAM", ram0);

-REGION_ALIAS("DATA_RAM_LMA", flash2);

-

-/* RAM region to be used for BSS segment.*/

-REGION_ALIAS("BSS_RAM", ram0);

-

-/* RAM region to be used for the default heap.*/

-REGION_ALIAS("HEAP_RAM", ram0);

-

-__eeprom_workarea_start__ = ORIGIN(flash3);

-__eeprom_workarea_size__  = LENGTH(flash3);

-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;

-

-/* Generic rules inclusion.*/

-INCLUDE rules.ld

+/*
+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * KL26Z64 memory setup.
+ */
+MEMORY
+{
+  flash0   : org = 0x00000000, len = 0x100
+  flash1   : org = 0x00000400, len = 0x10
+  flash2   : org = 0x00000410, len = 62k - 0x410
+  flash3   : org = 0x0000F800, len = 2k
+  flash4   : org = 0x00000000, len = 0
+  flash5   : org = 0x00000000, len = 0
+  flash6   : org = 0x00000000, len = 0
+  flash7   : org = 0x00000000, len = 0
+  ram0     : org = 0x1FFFF800, len = 8k
+  ram1     : org = 0x00000000, len = 0
+  ram2     : org = 0x00000000, len = 0
+  ram3     : org = 0x00000000, len = 0
+  ram4     : org = 0x00000000, len = 0
+  ram5     : org = 0x00000000, len = 0
+  ram6     : org = 0x00000000, len = 0
+  ram7     : org = 0x00000000, len = 0
+}
+
+/* Flash region for the configuration bytes.*/
+SECTIONS
+{
+  .cfmprotect : ALIGN(4) SUBALIGN(4)
+  {
+    KEEP(*(.cfmconfig))
+  } > flash1
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash2);
+REGION_ALIAS("XTORS_FLASH_LMA", flash2);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash2);
+REGION_ALIAS("TEXT_FLASH_LMA", flash2);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash2);
+REGION_ALIAS("RODATA_FLASH_LMA", flash2);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash2);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash2);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+__eeprom_workarea_start__ = ORIGIN(flash3);
+__eeprom_workarea_size__  = LENGTH(flash3);
+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
index 00613328ed..f9bfe9c005 100644
--- a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
+++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
@@ -1,88 +1,88 @@
-/*

-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/*

- * ST32F103xB memory setup for use with the maplemini bootloader.

- * You will have to

- * 	#define CORTEX_VTOR_INIT 0x5000

- * in your projects chconf.h

- */

-MEMORY

-{

-    flash0  : org = 0x08002000, len = 128k - 0x2000

-    flash1  : org = 0x00000000, len = 0

-    flash2  : org = 0x00000000, len = 0

-    flash3  : org = 0x00000000, len = 0

-    flash4  : org = 0x00000000, len = 0

-    flash5  : org = 0x00000000, len = 0

-    flash6  : org = 0x00000000, len = 0

-    flash7  : org = 0x00000000, len = 0

-    ram0    : org = 0x20000000, len = 20k

-    ram1    : org = 0x00000000, len = 0

-    ram2    : org = 0x00000000, len = 0

-    ram3    : org = 0x00000000, len = 0

-    ram4    : org = 0x00000000, len = 0

-    ram5    : org = 0x00000000, len = 0

-    ram6    : org = 0x00000000, len = 0

-    ram7    : org = 0x00000000, len = 0

-}

-

-/* For each data/text section two region are defined, a virtual region

-   and a load region (_LMA suffix).*/

-

-/* Flash region to be used for exception vectors.*/

-REGION_ALIAS("VECTORS_FLASH", flash0);

-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for constructors and destructors.*/

-REGION_ALIAS("XTORS_FLASH", flash0);

-REGION_ALIAS("XTORS_FLASH_LMA", flash0);

-

-/* Flash region to be used for code text.*/

-REGION_ALIAS("TEXT_FLASH", flash0);

-REGION_ALIAS("TEXT_FLASH_LMA", flash0);

-

-/* Flash region to be used for read only data.*/

-REGION_ALIAS("RODATA_FLASH", flash0);

-REGION_ALIAS("RODATA_FLASH_LMA", flash0);

-

-/* Flash region to be used for various.*/

-REGION_ALIAS("VARIOUS_FLASH", flash0);

-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);

-

-/* Flash region to be used for RAM(n) initialization data.*/

-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);

-

-/* RAM region to be used for Main stack. This stack accommodates the processing

-   of all exceptions and interrupts.*/

-REGION_ALIAS("MAIN_STACK_RAM", ram0);

-

-/* RAM region to be used for the process stack. This is the stack used by

-   the main() function.*/

-REGION_ALIAS("PROCESS_STACK_RAM", ram0);

-

-/* RAM region to be used for data segment.*/

-REGION_ALIAS("DATA_RAM", ram0);

-REGION_ALIAS("DATA_RAM_LMA", flash0);

-

-/* RAM region to be used for BSS segment.*/

-REGION_ALIAS("BSS_RAM", ram0);

-

-/* RAM region to be used for the default heap.*/

-REGION_ALIAS("HEAP_RAM", ram0);

-

-/* Generic rules inclusion.*/

-INCLUDE rules.ld

+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup for use with the maplemini bootloader.
+ * You will have to
+ * 	#define CORTEX_VTOR_INIT 0x5000
+ * in your projects chconf.h
+ */
+MEMORY
+{
+    flash0  : org = 0x08002000, len = 128k - 0x2000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
index 3d877aaa2b..faca3defdf 100644
--- a/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
@@ -1,171 +1,171 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-/*

- * STM32F0xx drivers configuration.

- * The following settings override the default settings present in

- * the various device driver implementation headers.

- * Note that the settings for each driver only have effect if the whole

- * driver is enabled in halconf.h.

- *

- * IRQ priorities:

- * 3...0       Lowest...Highest.

- *

- * DMA priorities:

- * 0...3        Lowest...Highest.

- */

-

-#define STM32F0xx_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-#define STM32_NO_INIT                       FALSE

-#define STM32_PVD_ENABLE                    FALSE

-#define STM32_PLS                           STM32_PLS_LEV0

-#define STM32_HSI_ENABLED                   TRUE

-#define STM32_HSI14_ENABLED                 TRUE

-#define STM32_HSI48_ENABLED                 FALSE

-#define STM32_LSI_ENABLED                   TRUE

-#define STM32_HSE_ENABLED                   FALSE

-#define STM32_LSE_ENABLED                   FALSE

-#define STM32_SW                            STM32_SW_PLL

-#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2

-#define STM32_PREDIV_VALUE                  1

-#define STM32_PLLMUL_VALUE                  12

-#define STM32_HPRE                          STM32_HPRE_DIV1

-#define STM32_PPRE                          STM32_PPRE_DIV1

-#define STM32_ADCSW                         STM32_ADCSW_HSI14

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_ADCSW                         STM32_ADCSW_HSI14

-#define STM32_USBSW                         STM32_USBSW_HSI48

-#define STM32_CECSW                         STM32_CECSW_HSI

-#define STM32_I2C1SW                        STM32_I2C1SW_HSI

-#define STM32_USART1SW                      STM32_USART1SW_PCLK

-#define STM32_RTCSEL                        STM32_RTCSEL_LSI

-

-/*

- * ADC driver system settings.

- */

-#define STM32_ADC_USE_ADC1                  FALSE

-#define STM32_ADC_ADC1_DMA_PRIORITY         2

-#define STM32_ADC_IRQ_PRIORITY              2

-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2

-

-/*

- * EXT driver system settings.

- */

-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3

-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3

-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3

-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3

-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3

-

-/*

- * GPT driver system settings.

- */

-#define STM32_GPT_USE_TIM1                  FALSE

-#define STM32_GPT_USE_TIM2                  FALSE

-#define STM32_GPT_USE_TIM3                  FALSE

-#define STM32_GPT_USE_TIM14                 FALSE

-#define STM32_GPT_TIM1_IRQ_PRIORITY         2

-#define STM32_GPT_TIM2_IRQ_PRIORITY         2

-#define STM32_GPT_TIM3_IRQ_PRIORITY         2

-#define STM32_GPT_TIM14_IRQ_PRIORITY        2

-

-/*

- * I2C driver system settings.

- */

-#define STM32_I2C_USE_I2C1                  FALSE

-#define STM32_I2C_USE_I2C2                  FALSE

-#define STM32_I2C_BUSY_TIMEOUT              50

-#define STM32_I2C_I2C1_IRQ_PRIORITY         3

-#define STM32_I2C_I2C2_IRQ_PRIORITY         3

-#define STM32_I2C_USE_DMA                   TRUE

-#define STM32_I2C_I2C1_DMA_PRIORITY         1

-#define STM32_I2C_I2C2_DMA_PRIORITY         1

-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")

-

-/*

- * ICU driver system settings.

- */

-#define STM32_ICU_USE_TIM1                  FALSE

-#define STM32_ICU_USE_TIM2                  FALSE

-#define STM32_ICU_USE_TIM3                  FALSE

-#define STM32_ICU_TIM1_IRQ_PRIORITY         3

-#define STM32_ICU_TIM2_IRQ_PRIORITY         3

-#define STM32_ICU_TIM3_IRQ_PRIORITY         3

-

-/*

- * PWM driver system settings.

- */

-#define STM32_PWM_USE_ADVANCED              FALSE

-#define STM32_PWM_USE_TIM1                  FALSE

-#define STM32_PWM_USE_TIM2                  FALSE

-#define STM32_PWM_USE_TIM3                  FALSE

-#define STM32_PWM_TIM1_IRQ_PRIORITY         3

-#define STM32_PWM_TIM2_IRQ_PRIORITY         3

-#define STM32_PWM_TIM3_IRQ_PRIORITY         3

-

-/*

- * SERIAL driver system settings.

- */

-#define STM32_SERIAL_USE_USART1             FALSE

-#define STM32_SERIAL_USE_USART2             FALSE

-#define STM32_SERIAL_USART1_PRIORITY        3

-#define STM32_SERIAL_USART2_PRIORITY        3

-

-/*

- * SPI driver system settings.

- */

-#define STM32_SPI_USE_SPI1                  FALSE

-#define STM32_SPI_USE_SPI2                  FALSE

-#define STM32_SPI_SPI1_DMA_PRIORITY         1

-#define STM32_SPI_SPI2_DMA_PRIORITY         1

-#define STM32_SPI_SPI1_IRQ_PRIORITY         2

-#define STM32_SPI_SPI2_IRQ_PRIORITY         2

-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")

-

-/*

- * ST driver system settings.

- */

-#define STM32_ST_IRQ_PRIORITY               2

-#define STM32_ST_USE_TIMER                  2

-

-/*

- * UART driver system settings.

- */

-#define STM32_UART_USE_USART1               FALSE

-#define STM32_UART_USE_USART2               FALSE

-#define STM32_UART_USART1_IRQ_PRIORITY      3

-#define STM32_UART_USART2_IRQ_PRIORITY      3

-#define STM32_UART_USART1_DMA_PRIORITY      0

-#define STM32_UART_USART2_DMA_PRIORITY      0

-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")

-

-/*

- * USB driver system settings.

- */

-#define STM32_USB_USE_USB1                  TRUE

-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE

-#define STM32_USB_USB1_LP_IRQ_PRIORITY      3

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
index 626332a6aa..276829216e 100644
--- a/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
+++ b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
@@ -1,209 +1,209 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define STM32F103_MCUCONF

-

-/*

- * STM32F103 drivers configuration.

- * The following settings override the default settings present in

- * the various device driver implementation headers.

- * Note that the settings for each driver only have effect if the whole

- * driver is enabled in halconf.h.

- *

- * IRQ priorities:

- * 15...0       Lowest...Highest.

- *

- * DMA priorities:

- * 0...3        Lowest...Highest.

- */

-

-/*

- * HAL driver system settings.

- */

-#define STM32_NO_INIT                       FALSE

-#define STM32_HSI_ENABLED                   TRUE

-#define STM32_LSI_ENABLED                   FALSE

-#define STM32_HSE_ENABLED                   TRUE

-#define STM32_LSE_ENABLED                   FALSE

-#define STM32_SW                            STM32_SW_PLL

-#define STM32_PLLSRC                        STM32_PLLSRC_HSE

-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1

-#define STM32_PLLMUL_VALUE                  9

-#define STM32_HPRE                          STM32_HPRE_DIV1

-#define STM32_PPRE1                         STM32_PPRE1_DIV2

-#define STM32_PPRE2                         STM32_PPRE2_DIV2

-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4

-#define STM32_USB_CLOCK_REQUIRED            TRUE

-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5

-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK

-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV

-#define STM32_PVD_ENABLE                    FALSE

-#define STM32_PLS                           STM32_PLS_LEV0

-

-/*

- * ADC driver system settings.

- */

-#define STM32_ADC_USE_ADC1                  FALSE

-#define STM32_ADC_ADC1_DMA_PRIORITY         2

-#define STM32_ADC_ADC1_IRQ_PRIORITY         6

-

-/*

- * CAN driver system settings.

- */

-#define STM32_CAN_USE_CAN1                  FALSE

-#define STM32_CAN_CAN1_IRQ_PRIORITY         11

-

-/*

- * EXT driver system settings.

- */

-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6

-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6

-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6

-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI17_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6

-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6

-

-/*

- * GPT driver system settings.

- */

-#define STM32_GPT_USE_TIM1                  FALSE

-#define STM32_GPT_USE_TIM2                  FALSE

-#define STM32_GPT_USE_TIM3                  FALSE

-#define STM32_GPT_USE_TIM4                  FALSE

-#define STM32_GPT_USE_TIM5                  FALSE

-#define STM32_GPT_USE_TIM8                  FALSE

-#define STM32_GPT_TIM1_IRQ_PRIORITY         7

-#define STM32_GPT_TIM2_IRQ_PRIORITY         7

-#define STM32_GPT_TIM3_IRQ_PRIORITY         7

-#define STM32_GPT_TIM4_IRQ_PRIORITY         7

-#define STM32_GPT_TIM5_IRQ_PRIORITY         7

-#define STM32_GPT_TIM8_IRQ_PRIORITY         7

-

-/*

- * I2C driver system settings.

- */

-#define STM32_I2C_USE_I2C1                  FALSE

-#define STM32_I2C_USE_I2C2                  FALSE

-#define STM32_I2C_BUSY_TIMEOUT              50

-#define STM32_I2C_I2C1_IRQ_PRIORITY         5

-#define STM32_I2C_I2C2_IRQ_PRIORITY         5

-#define STM32_I2C_I2C1_DMA_PRIORITY         3

-#define STM32_I2C_I2C2_DMA_PRIORITY         3

-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")

-

-/*

- * ICU driver system settings.

- */

-#define STM32_ICU_USE_TIM1                  FALSE

-#define STM32_ICU_USE_TIM2                  FALSE

-#define STM32_ICU_USE_TIM3                  FALSE

-#define STM32_ICU_USE_TIM4                  FALSE

-#define STM32_ICU_USE_TIM5                  FALSE

-#define STM32_ICU_USE_TIM8                  FALSE

-#define STM32_ICU_TIM1_IRQ_PRIORITY         7

-#define STM32_ICU_TIM2_IRQ_PRIORITY         7

-#define STM32_ICU_TIM3_IRQ_PRIORITY         7

-#define STM32_ICU_TIM4_IRQ_PRIORITY         7

-#define STM32_ICU_TIM5_IRQ_PRIORITY         7

-#define STM32_ICU_TIM8_IRQ_PRIORITY         7

-

-/*

- * PWM driver system settings.

- */

-#define STM32_PWM_USE_ADVANCED              FALSE

-#define STM32_PWM_USE_TIM1                  FALSE

-#define STM32_PWM_USE_TIM2                  FALSE

-#define STM32_PWM_USE_TIM3                  FALSE

-#define STM32_PWM_USE_TIM4                  FALSE

-#define STM32_PWM_USE_TIM5                  FALSE

-#define STM32_PWM_USE_TIM8                  FALSE

-#define STM32_PWM_TIM1_IRQ_PRIORITY         7

-#define STM32_PWM_TIM2_IRQ_PRIORITY         7

-#define STM32_PWM_TIM3_IRQ_PRIORITY         7

-#define STM32_PWM_TIM4_IRQ_PRIORITY         7

-#define STM32_PWM_TIM5_IRQ_PRIORITY         7

-#define STM32_PWM_TIM8_IRQ_PRIORITY         7

-

-/*

- * RTC driver system settings.

- */

-#define STM32_RTC_IRQ_PRIORITY              15

-

-/*

- * SERIAL driver system settings.

- */

-#define STM32_SERIAL_USE_USART1             FALSE

-#define STM32_SERIAL_USE_USART2             FALSE

-#define STM32_SERIAL_USE_USART3             FALSE

-#define STM32_SERIAL_USE_UART4              FALSE

-#define STM32_SERIAL_USE_UART5              FALSE

-#define STM32_SERIAL_USART1_PRIORITY        12

-#define STM32_SERIAL_USART2_PRIORITY        12

-#define STM32_SERIAL_USART3_PRIORITY        12

-#define STM32_SERIAL_UART4_PRIORITY         12

-#define STM32_SERIAL_UART5_PRIORITY         12

-

-/*

- * SPI driver system settings.

- */

-#define STM32_SPI_USE_SPI1                  FALSE

-#define STM32_SPI_USE_SPI2                  FALSE

-#define STM32_SPI_USE_SPI3                  FALSE

-#define STM32_SPI_SPI1_DMA_PRIORITY         1

-#define STM32_SPI_SPI2_DMA_PRIORITY         1

-#define STM32_SPI_SPI3_DMA_PRIORITY         1

-#define STM32_SPI_SPI1_IRQ_PRIORITY         10

-#define STM32_SPI_SPI2_IRQ_PRIORITY         10

-#define STM32_SPI_SPI3_IRQ_PRIORITY         10

-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")

-

-/*

- * ST driver system settings.

- */

-#define STM32_ST_IRQ_PRIORITY               8

-#define STM32_ST_USE_TIMER                  2

-

-/*

- * UART driver system settings.

- */

-#define STM32_UART_USE_USART1               FALSE

-#define STM32_UART_USE_USART2               FALSE

-#define STM32_UART_USE_USART3               FALSE

-#define STM32_UART_USART1_IRQ_PRIORITY      12

-#define STM32_UART_USART2_IRQ_PRIORITY      12

-#define STM32_UART_USART3_IRQ_PRIORITY      12

-#define STM32_UART_USART1_DMA_PRIORITY      0

-#define STM32_UART_USART2_DMA_PRIORITY      0

-#define STM32_UART_USART3_DMA_PRIORITY      0

-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")

-

-/*

- * USB driver system settings.

- */

-#define STM32_USB_USE_USB1                  TRUE

-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE

-#define STM32_USB_USB1_HP_IRQ_PRIORITY      13

-#define STM32_USB_USB1_LP_IRQ_PRIORITY      14

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
index cb36996c33..3294ac7eee 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/chconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/chconf.h
@@ -1,524 +1,524 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/chconf.h

- * @brief   Configuration file template.

- * @details A copy of this file must be placed in each project directory, it

- *          contains the application specific kernel settings.

- *

- * @addtogroup config

- * @details Kernel related settings and hooks.

- * @{

- */

-

-#ifndef CHCONF_H

-#define CHCONF_H

-

-#define _CHIBIOS_RT_CONF_

-

-/*===========================================================================*/

-/**

- * @name System timers settings

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   System time counter resolution.

- * @note    Allowed values are 16 or 32 bits.

- */

-#define CH_CFG_ST_RESOLUTION                32

-

-/**

- * @brief   System tick frequency.

- * @details Frequency of the system timer that drives the system ticks. This

- *          setting also defines the system tick time unit.

- */

-#define CH_CFG_ST_FREQUENCY                 1000

-

-/**

- * @brief   Time delta constant for the tick-less mode.

- * @note    If this value is zero then the system uses the classic

- *          periodic tick. This value represents the minimum number

- *          of ticks that is safe to specify in a timeout directive.

- *          The value one is not valid, timeouts are rounded up to

- *          this value.

- */

-#define CH_CFG_ST_TIMEDELTA                 0

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel parameters and options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Round robin interval.

- * @details This constant is the number of system ticks allowed for the

- *          threads before preemption occurs. Setting this value to zero

- *          disables the preemption for threads with equal priority and the

- *          round robin becomes cooperative. Note that higher priority

- *          threads can still preempt, the kernel is always preemptive.

- * @note    Disabling the round robin preemption makes the kernel more compact

- *          and generally faster.

- * @note    The round robin preemption is not supported in tickless mode and

- *          must be set to zero in that case.

- */

-#define CH_CFG_TIME_QUANTUM                 20

-

-/**

- * @brief   Managed RAM size.

- * @details Size of the RAM area to be managed by the OS. If set to zero

- *          then the whole available RAM is used. The core memory is made

- *          available to the heap allocator and/or can be used directly through

- *          the simplified core memory allocator.

- *

- * @note    In order to let the OS manage the whole RAM the linker script must

- *          provide the @p __heap_base__ and @p __heap_end__ symbols.

- * @note    Requires @p CH_CFG_USE_MEMCORE.

- */

-#define CH_CFG_MEMCORE_SIZE                 0

-

-/**

- * @brief   Idle thread automatic spawn suppression.

- * @details When this option is activated the function @p chSysInit()

- *          does not spawn the idle thread. The application @p main()

- *          function becomes the idle thread and must implement an

- *          infinite loop.

- */

-#define CH_CFG_NO_IDLE_THREAD               FALSE

-

-/* Use __WFI in the idle thread for waiting. Does lower the power

- * consumption. */

-#define CORTEX_ENABLE_WFI_IDLE              TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Performance options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   OS optimization.

- * @details If enabled then time efficient rather than space efficient code

- *          is used when two possible implementations exist.

- *

- * @note    This is not related to the compiler optimization options.

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_OPTIMIZE_SPEED               TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Subsystem options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Time Measurement APIs.

- * @details If enabled then the time measurement APIs are included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_TM                       FALSE

-

-/**

- * @brief   Threads registry APIs.

- * @details If enabled then the registry APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_REGISTRY                 TRUE

-

-/**

- * @brief   Threads synchronization APIs.

- * @details If enabled then the @p chThdWait() function is included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_WAITEXIT                 TRUE

-

-/**

- * @brief   Semaphores APIs.

- * @details If enabled then the Semaphores APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_SEMAPHORES               TRUE

-

-/**

- * @brief   Semaphores queuing mode.

- * @details If enabled then the threads are enqueued on semaphores by

- *          priority rather than in FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

-

-/**

- * @brief   Mutexes APIs.

- * @details If enabled then the mutexes APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MUTEXES                  TRUE

-

-/**

- * @brief   Enables recursive behavior on mutexes.

- * @note    Recursive mutexes are heavier and have an increased

- *          memory footprint.

- *

- * @note    The default is @p FALSE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

-

-/**

- * @brief   Conditional Variables APIs.

- * @details If enabled then the conditional variables APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_CONDVARS                 TRUE

-

-/**

- * @brief   Conditional Variables APIs with timeout.

- * @details If enabled then the conditional variables APIs with timeout

- *          specification are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_CONDVARS.

- */

-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

-

-/**

- * @brief   Events Flags APIs.

- * @details If enabled then the event flags APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_EVENTS                   TRUE

-

-/**

- * @brief   Events Flags APIs with timeout.

- * @details If enabled then the events APIs with timeout specification

- *          are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_EVENTS.

- */

-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

-

-/**

- * @brief   Synchronous Messages APIs.

- * @details If enabled then the synchronous messages APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MESSAGES                 TRUE

-

-/**

- * @brief   Synchronous Messages queuing mode.

- * @details If enabled then messages are served by priority rather than in

- *          FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_MESSAGES.

- */

-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

-

-/**

- * @brief   Mailboxes APIs.

- * @details If enabled then the asynchronous messages (mailboxes) APIs are

- *          included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_MAILBOXES                TRUE

-

-/**

- * @brief   Core Memory Manager APIs.

- * @details If enabled then the core memory manager APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMCORE                  TRUE

-

-/**

- * @brief   Heap Allocator APIs.

- * @details If enabled then the memory heap allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

- *          @p CH_CFG_USE_SEMAPHORES.

- * @note    Mutexes are recommended.

- */

-#define CH_CFG_USE_HEAP                     TRUE

-

-/**

- * @brief   Memory Pools Allocator APIs.

- * @details If enabled then the memory pools allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMPOOLS                 TRUE

-

-/**

- * @brief   Dynamic Threads APIs.

- * @details If enabled then the dynamic threads creation APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_WAITEXIT.

- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

- */

-#define CH_CFG_USE_DYNAMIC                  TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Debug options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Debug option, kernel statistics.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_STATISTICS                   FALSE

-

-/**

- * @brief   Debug option, system state check.

- * @details If enabled the correct call protocol for system APIs is checked

- *          at runtime.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE

-

-/**

- * @brief   Debug option, parameters checks.

- * @details If enabled then the checks on the API functions input

- *          parameters are activated.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_CHECKS                TRUE

-

-/**

- * @brief   Debug option, consistency checks.

- * @details If enabled then all the assertions in the kernel code are

- *          activated. This includes consistency checks inside the kernel,

- *          runtime anomalies and port-defined checks.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_ASSERTS               TRUE

-

-/**

- * @brief   Debug option, trace buffer.

- * @details If enabled then the trace buffer is activated.

- *

- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED

-

-/**

- * @brief   Trace buffer entries.

- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is

- *          different from @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_BUFFER_SIZE            128

-

-/**

- * @brief   Debug option, stack checks.

- * @details If enabled then a runtime stack check is performed.

- *

- * @note    The default is @p FALSE.

- * @note    The stack check is performed in a architecture/port dependent way.

- *          It may not be implemented or some ports.

- * @note    The default failure mode is to halt the system with the global

- *          @p panic_msg variable set to @p NULL.

- */

-#define CH_DBG_ENABLE_STACK_CHECK           TRUE

-

-/**

- * @brief   Debug option, stacks initialization.

- * @details If enabled then the threads working area is filled with a byte

- *          value when a thread is created. This can be useful for the

- *          runtime measurement of the used stack.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_FILL_THREADS                 TRUE

-

-/**

- * @brief   Debug option, threads profiling.

- * @details If enabled then a field is added to the @p thread_t structure that

- *          counts the system ticks occurred while executing the thread.

- *

- * @note    The default is @p FALSE.

- * @note    This debug option is not currently compatible with the

- *          tickless mode.

- */

-#define CH_DBG_THREADS_PROFILING            FALSE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel hooks

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Threads descriptor structure extension.

- * @details User fields added to the end of the @p thread_t structure.

- */

-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

-  /* Add threads custom fields here.*/

-

-/**

- * @brief   Threads initialization hook.

- * @details User initialization code added to the @p chThdInit() API.

- *

- * @note    It is invoked from within @p chThdInit() and implicitly from all

- *          the threads creation APIs.

- */

-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

-  /* Add threads initialization code here.*/                                \

-}

-

-/**

- * @brief   Threads finalization hook.

- * @details User finalization code added to the @p chThdExit() API.

- */

-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

-  /* Add threads finalization code here.*/                                  \

-}

-

-/**

- * @brief   Context switch hook.

- * @details This hook is invoked just before switching between threads.

- */

-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

-  /* Context switch code here.*/                                            \

-}

-

-/**

- * @brief   ISR enter hook.

- */

-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

-  /* IRQ prologue code here.*/                                              \

-}

-

-/**

- * @brief   ISR exit hook.

- */

-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

-  /* IRQ epilogue code here.*/                                              \

-}

-

-/**

- * @brief   Idle thread enter hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to activate a power saving mode.

- */

-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

-  /* Idle-enter code here.*/                                                \

-}

-

-/**

- * @brief   Idle thread leave hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to deactivate a power saving mode.

- */

-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

-  /* Idle-leave code here.*/                                                \

-}

-

-/**

- * @brief   Idle Loop hook.

- * @details This hook is continuously invoked by the idle thread loop.

- */

-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

-  /* Idle loop code here.*/                                                 \

-}

-

-/**

- * @brief   System tick event hook.

- * @details This hook is invoked in the system tick handler immediately

- *          after processing the virtual timers queue.

- */

-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

-  /* System tick event code here.*/                                         \

-}

-

-/**

- * @brief   System halt hook.

- * @details This hook is invoked in case to a system halting error before

- *          the system is halted.

- */

-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

-  /* System halt code here.*/                                               \

-}

-

-/**

- * @brief   Trace hook.

- * @details This hook is invoked each time a new record is written in the

- *          trace buffer.

- */

-#define CH_CFG_TRACE_HOOK(tep) {                                            \

-  /* Trace code here.*/                                                     \

-}

-

-/** @} */

-

-/*===========================================================================*/

-/* Port-specific settings (override port settings defaulted in chcore.h).    */

-/*===========================================================================*/

-

-#endif  /* CHCONF_H */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
index b1d2cd5502..0436408b09 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/halconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/halconf.h
@@ -1,187 +1,187 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/halconf.h

- * @brief   HAL configuration header.

- * @details HAL configuration file, this file allows to enable or disable the

- *          various device drivers from your application. You may also use

- *          this file in order to override the device drivers default settings.

- *

- * @addtogroup HAL_CONF

- * @{

- */

-

-#ifndef _HALCONF_H_

-#define _HALCONF_H_

-

-#include "mcuconf.h"

-

-/**

- * @brief   Enables the PAL subsystem.

- */

-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

-#define HAL_USE_PAL                 TRUE

-#endif

-

-/**

- * @brief   Enables the ADC subsystem.

- */

-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

-#define HAL_USE_ADC                 FALSE

-#endif

-

-/**

- * @brief   Enables the CAN subsystem.

- */

-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

-#define HAL_USE_CAN                 FALSE

-#endif

-

-/**

- * @brief   Enables the DAC subsystem.

- */

-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

-#define HAL_USE_DAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the EXT subsystem.

- */

-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

-#define HAL_USE_EXT                 FALSE

-#endif

-

-/**

- * @brief   Enables the GPT subsystem.

- */

-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

-#define HAL_USE_GPT                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2C subsystem.

- */

-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

-#define HAL_USE_I2C                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2S subsystem.

- */

-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

-#define HAL_USE_I2S                 FALSE

-#endif

-

-/**

- * @brief   Enables the ICU subsystem.

- */

-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

-#define HAL_USE_ICU                 FALSE

-#endif

-

-/**

- * @brief   Enables the MAC subsystem.

- */

-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

-#define HAL_USE_MAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the MMC_SPI subsystem.

- */

-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_MMC_SPI             FALSE

-#endif

-

-/**

- * @brief   Enables the PWM subsystem.

- */

-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

-#define HAL_USE_PWM                 FALSE

-#endif

-

-/**

- * @brief   Enables the RTC subsystem.

- */

-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

-#define HAL_USE_RTC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SDC subsystem.

- */

-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

-#define HAL_USE_SDC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL subsystem.

- */

-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL              FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL over USB subsystem.

- */

-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL_USB          FALSE

-#endif

-

-/**

- * @brief   Enables the SPI subsystem.

- */

-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_SPI                 FALSE

-#endif

-

-/**

- * @brief   Enables the UART subsystem.

- */

-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

-#define HAL_USE_UART                FALSE

-#endif

-

-/**

- * @brief   Enables the USB subsystem.

- */

-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

-#define HAL_USE_USB                 TRUE

-#endif

-

-/**

- * @brief   Enables the WDG subsystem.

- */

-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

-#define HAL_USE_WDG                 FALSE

-#endif

-

-/*===========================================================================*/

-/* USB driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

-#define USB_USE_WAIT                TRUE

-#endif

-

-#endif /* _HALCONF_H_ */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
index c636590197..2764e88989 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
@@ -1,55 +1,55 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define KL2x_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-#if 1

-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE

-#define KINETIS_PLLCLK_FREQUENCY    96000000UL

-#define KINETIS_SYSCLK_FREQUENCY    48000000UL

-#endif

-

-#if 0

-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

-#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */

-#endif

-

-/*

- * SERIAL driver system settings.

- */

-#define KINETIS_SERIAL_USE_UART0              TRUE

-

-/*

- * USB driver settings

- */

-#define KINETIS_USB_USE_USB0                  TRUE

-/* Need to redefine this, since the default is for K20x */

-/* This is for Teensy LC; you should comment it out (or change to 5)

- * for Teensy 3.x */

-#define KINETIS_USB_USB0_IRQ_PRIORITY         2

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/gh60/Makefile b/keyboards/gh60/Makefile
index 39a9cc0ae1..075b77256f 100644
--- a/keyboards/gh60/Makefile
+++ b/keyboards/gh60/Makefile
@@ -1,74 +1,74 @@
-

-

-# MCU name

-#MCU = at90usb1287

-MCU = atmega32u4

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 16000000

-

-

-#

-# LUFA specific

-#

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-# Interrupt driven control endpoint task(+60)

-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

-

-

-# Boot Section Size in *bytes*

-#   Teensy halfKay   512

-#   Teensy++ halfKay 1024

-#   Atmel DFU loader 4096

-#   LUFA bootloader  4096

-#   USBaspLoader     2048

-OPT_DEFS += -DBOOTLOADER_SIZE=4096

-

-

-# Build Options

-#   comment out to disable the options.

-#

-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)

-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)

-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)

-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)

-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration

-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key

-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend

-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality

-# MIDI_ENABLE ?= YES			# MIDI controls

-# UNICODE_ENABLE ?= YES		# Unicode

-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID

-

-

-ifndef QUANTUM_DIR

-	include ../../Makefile

-endif

-

+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES			# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h
index 4813c4e786..97753bc069 100644
--- a/keyboards/gh60/config.h
+++ b/keyboards/gh60/config.h
@@ -1,161 +1,161 @@
-/*

-Copyright 2012 Jun Wako <wakojun@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program. If not, see <http://www.gnu.org/licenses/>.

-*/

-

-#ifndef CONFIG_H

-#define CONFIG_H

-

-#include "config_common.h"

-

-/* USB Device descriptor parameter */

-#define VENDOR_ID    0xFEED

-#define PRODUCT_ID   0x6060

-#define DEVICE_VER   0x0001

-#define MANUFACTURER    geekhack

-#define PRODUCT         GH60

-#define DESCRIPTION     t.m.k. keyboard firmware for GH60

-

-/* key matrix size */

-#define MATRIX_ROWS 5

-#define MATRIX_COLS 14

-

-/*

- * Keyboard Matrix Assignments

- *

- * Change this to how you wired your keyboard

- * COLS: AVR pins used for columns, left to right

- * ROWS: AVR pins used for rows, top to bottom

- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

- *

-*/

- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }

-// Rev A

-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }

-// Rev B/C

-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

-#define UNUSED_PINS

-

-/* COL2ROW or ROW2COL */

-#define DIODE_DIRECTION COL2ROW

-

-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

-#define DEBOUNCING_DELAY 5

-

-/* define if matrix has ghost (lacks anti-ghosting diodes) */

-//#define MATRIX_HAS_GHOST

-

-/* number of backlight levels */

-#define BACKLIGHT_LEVELS 3

-

-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

-#define LOCKING_SUPPORT_ENABLE

-/* Locking resynchronize hack */

-#define LOCKING_RESYNC_ENABLE

-

-/*

- * Force NKRO

- *

- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

- * makefile for this to work.)

- *

- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

- * until the next keyboard reset.

- *

- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

- * fully operational during normal computer usage.

- *

- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by

- * bootmagic, NKRO mode will always be enabled until it is toggled again during a

- * power-up.

- *

- */

-//#define FORCE_NKRO

-

-/*

- * Magic Key Options

- *

- * Magic keys are hotkey commands that allow control over firmware functions of

- * the keyboard. They are best used in combination with the HID Listen program,

- * found here: https://www.pjrc.com/teensy/hid_listen.html

- *

- * The options below allow the magic key functionality to be changed. This is

- * useful if your keyboard/keypad is missing keys and you want magic key support.

- *

- */

-

-/* key combination for magic key command */

-#define IS_COMMAND() ( \

-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \

-)

-

-/* control how magic key switches layers */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false

-

-/* override magic key keymap */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM

-//#define MAGIC_KEY_HELP1     H

-//#define MAGIC_KEY_HELP2     SLASH

-//#define MAGIC_KEY_DEBUG     D

-//#define MAGIC_KEY_DEBUG_MATRIX  X

-//#define MAGIC_KEY_DEBUG_KBD   K

-//#define MAGIC_KEY_DEBUG_MOUSE  M

-//#define MAGIC_KEY_VERSION    V

-//#define MAGIC_KEY_STATUS     S

-//#define MAGIC_KEY_CONSOLE    C

-//#define MAGIC_KEY_LAYER0_ALT1  ESC

-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE

-//#define MAGIC_KEY_LAYER0     0

-//#define MAGIC_KEY_LAYER1     1

-//#define MAGIC_KEY_LAYER2     2

-//#define MAGIC_KEY_LAYER3     3

-//#define MAGIC_KEY_LAYER4     4

-//#define MAGIC_KEY_LAYER5     5

-//#define MAGIC_KEY_LAYER6     6

-//#define MAGIC_KEY_LAYER7     7

-//#define MAGIC_KEY_LAYER8     8

-//#define MAGIC_KEY_LAYER9     9

-//#define MAGIC_KEY_BOOTLOADER   PAUSE

-//#define MAGIC_KEY_LOCK      CAPS

-//#define MAGIC_KEY_EEPROM     E

-//#define MAGIC_KEY_NKRO      N

-//#define MAGIC_KEY_SLEEP_LED   Z

-

-/*

- * Feature disable options

- * These options are also useful to firmware size reduction.

- */

-

-/* disable debug print */

-//#define NO_DEBUG

-

-/* disable print */

-//#define NO_PRINT

-

-/* disable action features */

-//#define NO_ACTION_LAYER

-//#define NO_ACTION_TAPPING

-//#define NO_ACTION_ONESHOT

-//#define NO_ACTION_MACRO

-//#define NO_ACTION_FUNCTION

-

-#endif

+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/gh60/gh60.c b/keyboards/gh60/gh60.c
index 255d87de99..f5a158e12f 100644
--- a/keyboards/gh60/gh60.c
+++ b/keyboards/gh60/gh60.c
@@ -1,25 +1,25 @@
-#include "gh60.h"

-

-void led_set_kb(uint8_t usb_led) {

-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here

-	

-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {

-		gh60_caps_led_on();

-		} else {

-		gh60_caps_led_off(); 

-    }

-	

-    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {

-		// gh60_esc_led_on();

-		// } else {

-		// gh60_esc_led_off(); 

-    // }

-	

-    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {

-		// gh60_fn_led_on();

-		// } else {

-		// gh60_fn_led_off(); 	

-    // }

-

-	led_set_user(usb_led);	

-}

+#include "gh60.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		gh60_caps_led_on();
+		} else {
+		gh60_caps_led_off(); 
+    }
+	
+    // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+		// gh60_esc_led_on();
+		// } else {
+		// gh60_esc_led_off(); 
+    // }
+	
+    // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+		// gh60_fn_led_on();
+		// } else {
+		// gh60_fn_led_off(); 	
+    // }
+
+	led_set_user(usb_led);	
+}
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h
index ca30562a44..82624b6148 100644
--- a/keyboards/gh60/gh60.h
+++ b/keyboards/gh60/gh60.h
@@ -1,74 +1,74 @@
-#ifndef GH60_H

-#define GH60_H

-

-#include "quantum.h"

-#include "led.h"

-

-/* GH60 LEDs 

- *   GPIO pads

- *   0 F7 WASD LEDs

- *   1 F6 ESC LED

- *   2 F5 FN LED

- *   3 F4 POKER Arrow LEDs

- *   B2 Capslock LED

- *   B0 not connected

- */

-inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }

-inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }

-inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }

-inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }

-inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }

-

-inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }

-inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }

-inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }

-inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }

-inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }

-

-/* GH60 keymap definition macro

- * K2C, K31 and  K3C are extra keys for ISO

- */

-#define KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \

-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \

-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \

-) { \

-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \

-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \

-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \

-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \

-    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \

-}

-

-/* ANSI valiant. No extra keys for ISO */

-#define KEYMAP_ANSI( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \

-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \

-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \

-) KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \

-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \

-    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \

-)

-

-#define KEYMAP_HHKB( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \

-    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \

-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \

-) KEYMAP( \

-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \

-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \

-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \

-    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \

-    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \

-)

-

-#endif

+#ifndef GH60_H
+#define GH60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* GH60 LEDs 
+ *   GPIO pads
+ *   0 F7 WASD LEDs
+ *   1 F6 ESC LED
+ *   2 F5 FN LED
+ *   3 F4 POKER Arrow LEDs
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+inline void gh60_caps_led_on(void)      { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_on(void)    { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_on(void)    	{ DDRF |=  (1<<7); PORTF &= ~(1<<7); }
+
+inline void gh60_caps_led_off(void)     { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void gh60_poker_leds_off(void)   { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void gh60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void gh60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void gh60_wasd_leds_off(void)   	{ DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* GH60 keymap definition macro
+ * K2C, K31 and  K3C are extra keys for ISO
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D }  \
+}
+
+/* ANSI valiant. No extra keys for ISO */
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO,  K3D, \
+    K40, K41, K42,           K45,                NO,  K4A, K4B, K4C, K4D  \
+)
+
+#define KEYMAP_HHKB( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3C, \
+    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+) KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO,  K2D, \
+    K30, NO,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,           K45,                K49, K4A, K4B, K4C, K4D  \
+)
+
+#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile
index 2e69aee298..c73cf11417 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -1,112 +1,112 @@
-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device.

-#                Please customize your programmer settings(PROGRAM_CMD)

-#

-# make teensy = Download the hex file to the device, using teensy_loader_cli.

-#               (must have teensy_loader_cli installed).

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

-# make debug = Start either simulavr or avarice as specified for debugging, 

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-# MCU name

-#MCU = at90usb1287

-MCU = atmega32u4

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_USB below, as it is sourced by

-#     F_USB after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 16000000

-

-

-#

-# LUFA specific

-#

-# Target architecture (see library "Board Types" documentation).

-ARCH = AVR8

-

-# Input clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_USB = $(F_CPU)

-

-# Interrupt driven control endpoint task(+60)

-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

-

-

-# Boot Section Size in *bytes*

-#   Teensy halfKay   512

-#   Teensy++ halfKay 1024

-#   Atmel DFU loader 4096

-#   LUFA bootloader  4096

-#   USBaspLoader     2048

-OPT_DEFS += -DBOOTLOADER_SIZE=4096

-

-

-# Build Options

-#   comment out to disable the options.

-#

-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)

-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)

-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)

-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)

-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration

-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key

-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend

-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work

-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality

-# MIDI_ENABLE ?= YES		# MIDI controls

-# UNICODE_ENABLE ?= YES		# Unicode

-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID

-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow

-

-ifndef QUANTUM_DIR

-	include ../../../../Makefile

-endif

-

+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES		# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
index 8272875ed0..6a29e6b8c2 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/keymaps/robotmaxtron/config.h
@@ -1,190 +1,190 @@
-/*

-Copyright 2012 Jun Wako <wakojun@gmail.com>

-

-This program is free software: you can redistribute it and/or modify

-it under the terms of the GNU General Public License as published by

-the Free Software Foundation, either version 2 of the License, or

-(at your option) any later version.

-

-This program is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-GNU General Public License for more details.

-

-You should have received a copy of the GNU General Public License

-along with this program. If not, see <http://www.gnu.org/licenses/>.

-*/

-

-#ifndef CONFIG_H

-#define CONFIG_H

-

-#include "config_common.h"

-

-/* USB Device descriptor parameter */

-#define VENDOR_ID    0xFEED

-#define PRODUCT_ID   0x6060

-#define DEVICE_VER   0x0001

-#define MANUFACTURER    geekhack

-#define PRODUCT         GH60

-#define DESCRIPTION     t.m.k. keyboard firmware for GH60

-

-/* key matrix size */

-#define MATRIX_ROWS 5

-#define MATRIX_COLS 14

-

-/*

- * Keyboard Matrix Assignments

- *

- * Change this to how you wired your keyboard

- * COLS: AVR pins used for columns, left to right

- * ROWS: AVR pins used for rows, top to bottom

- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)

- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)

- *

-*/

- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }

-// Rev A

-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }

-// Rev B/C

-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }

-#define UNUSED_PINS

-

-/* COL2ROW or ROW2COL */

-#define DIODE_DIRECTION COL2ROW

-

-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

-#define DEBOUNCING_DELAY 5

-

-/* define if matrix has ghost (lacks anti-ghosting diodes) */

-//#define MATRIX_HAS_GHOST

-

-/* number of backlight levels */

-#define BACKLIGHT_LEVELS 3

-

-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */

-#define LOCKING_SUPPORT_ENABLE

-/* Locking resynchronize hack */

-#define LOCKING_RESYNC_ENABLE

-

-/*

- * Force NKRO

- *

- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved

- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the

- * makefile for this to work.)

- *

- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)

- * until the next keyboard reset.

- *

- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is

- * fully operational during normal computer usage.

- *

- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)

- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by

- * bootmagic, NKRO mode will always be enabled until it is toggled again during a

- * power-up.

- *

- */

-//#define FORCE_NKRO

-

-/*

- * Magic Key Options

- *

- * Magic keys are hotkey commands that allow control over firmware functions of

- * the keyboard. They are best used in combination with the HID Listen program,

- * found here: https://www.pjrc.com/teensy/hid_listen.html

- *

- * The options below allow the magic key functionality to be changed. This is

- * useful if your keyboard/keypad is missing keys and you want magic key support.

- *

- */

-

-/* key combination for magic key command */

-#define IS_COMMAND() ( \

-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \

-)

-

-/* control how magic key switches layers */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false

-

-/* override magic key keymap */

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS

-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM

-//#define MAGIC_KEY_HELP1     H

-//#define MAGIC_KEY_HELP2     SLASH

-//#define MAGIC_KEY_DEBUG     D

-//#define MAGIC_KEY_DEBUG_MATRIX  X

-//#define MAGIC_KEY_DEBUG_KBD   K

-//#define MAGIC_KEY_DEBUG_MOUSE  M

-//#define MAGIC_KEY_VERSION    V

-//#define MAGIC_KEY_STATUS     S

-//#define MAGIC_KEY_CONSOLE    C

-//#define MAGIC_KEY_LAYER0_ALT1  ESC

-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE

-//#define MAGIC_KEY_LAYER0     0

-//#define MAGIC_KEY_LAYER1     1

-//#define MAGIC_KEY_LAYER2     2

-//#define MAGIC_KEY_LAYER3     3

-//#define MAGIC_KEY_LAYER4     4

-//#define MAGIC_KEY_LAYER5     5

-//#define MAGIC_KEY_LAYER6     6

-//#define MAGIC_KEY_LAYER7     7

-//#define MAGIC_KEY_LAYER8     8

-//#define MAGIC_KEY_LAYER9     9

-//#define MAGIC_KEY_BOOTLOADER   PAUSE

-//#define MAGIC_KEY_LOCK      CAPS

-//#define MAGIC_KEY_EEPROM     E

-//#define MAGIC_KEY_NKRO      N

-//#define MAGIC_KEY_SLEEP_LED   Z

-

-/*

- * Feature disable options

- * These options are also useful to firmware size reduction.

- */

-

-/* disable debug print */

-//#define NO_DEBUG

-

-/* disable print */

-//#define NO_PRINT

-

-/* disable action features */

-//#define NO_ACTION_LAYER

-//#define NO_ACTION_TAPPING

-//#define NO_ACTION_ONESHOT

-//#define NO_ACTION_MACRO

-//#define NO_ACTION_FUNCTION

-

-/*

- * RGB Underglow

- * These settings are for the F4 by default:

- * 

- *

- * #define ws2812_PORTREG  PORTF

- * #define ws2812_DDRREG   DDRF

- * #define ws2812_pin PF4

- * #define RGBLED_NUM 14     // Number of LEDs

- * #define RGBLIGHT_HUE_STEP 10

- * #define RGBLIGHT_SAT_STEP 17

- * #define RGBLIGHT_VAL_STEP 17

- *

- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 

- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 

- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c

-*/

-

-/* Deprecated code below

-#define ws2812_PORTREG  PORTF 

-#define ws2812_DDRREG   DDRF

-#define ws2812_pin PF4

-*/ 

-#define RGB_DI_PIN F4

-#define RGBLIGHT_TIMER

-#define RGBLED_NUM 8         // Number of LEDs

-#define RGBLIGHT_HUE_STEP 8

-#define RGBLIGHT_SAT_STEP 8

-#define RGBLIGHT_VAL_STEP 8

-#endif

+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ * 
+ *
+ * #define ws2812_PORTREG  PORTF
+ * #define ws2812_DDRREG   DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14     // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG  PORTF 
+#define ws2812_DDRREG   DDRF
+#define ws2812_pin PF4
+*/ 
+#define RGB_DI_PIN F4
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8         // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/gh60/pinout.txt b/keyboards/gh60/pinout.txt
index 3787f938e7..e9bf1983a5 100644
--- a/keyboards/gh60/pinout.txt
+++ b/keyboards/gh60/pinout.txt
@@ -1,18 +1,18 @@
-    /* Column pin configuration

-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13

-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)

-    */

-     

-    /* Row pin configuration

-    * row: 0   1   2   3   4

-    * pin: D0  D1  D2  D3  D5

-    */

-     

-    GPIO pads

-    0 F7 WASD LEDs

-    1 F6 ESC LED

-    2 F5 FN LED

-    3 F4 POKER Arrow LEDs

-     

-    B2 Capslock LED

+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
     B0 not connected
\ No newline at end of file
diff --git a/keyboards/gh60/readme.md b/keyboards/gh60/readme.md
index 92302d507c..ad042483d8 100644
--- a/keyboards/gh60/readme.md
+++ b/keyboards/gh60/readme.md
@@ -1,60 +1,60 @@
-## gh60 Rev C keyboard firmware

-

-![gh60 Rev C PCB](gh60revc.jpg)

-

-    /* Column pin configuration

-    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13

-    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)

-    */

-     

-    /* Row pin configuration

-    * row: 0   1   2   3   4

-    * pin: D0  D1  D2  D3  D5

-    */

-     

-    GPIO pads

-    0 F7 WASD LEDs

-    1 F6 ESC LED

-    2 F5 FN LED

-    3 F4 POKER Arrow LEDs

-     

-    B2 Capslock LED

-    B0 not connected

-	

-Functions to controls LED clusters

-	

-    gh60_caps_led_on()

-    gh60_poker_leds_on()

-    gh60_fn_led_on()

-    gh60_esc_led_on()

-    gh60_wasd_leds_on()

-    

-    gh60_caps_led_off()

-    gh60_poker_leds_off()

-    gh60_fn_led_off()

-    gh60_esc_led_off()

-    gh60_wasd_leds_off()

-	

-======================

-

-## Quantum MK Firmware

-

-For the full Quantum feature list, see [the parent readme.md](/readme.md).

-

-## Building

-

-Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 

-

-Depending on which keymap you would like to use, you will have to compile slightly differently.

-

-### Default

-To build with the default keymap, simply run `make`.

-

-### Other Keymaps

-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.

-

-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:

-```

-$ make KEYMAP=[default|jack|<name>]

-```

-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

+## gh60 Rev C keyboard firmware
+
+![gh60 Rev C PCB](gh60revc.jpg)
+
+    /* Column pin configuration
+    * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
+    * pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
+    */
+     
+    /* Row pin configuration
+    * row: 0   1   2   3   4
+    * pin: D0  D1  D2  D3  D5
+    */
+     
+    GPIO pads
+    0 F7 WASD LEDs
+    1 F6 ESC LED
+    2 F5 FN LED
+    3 F4 POKER Arrow LEDs
+     
+    B2 Capslock LED
+    B0 not connected
+	
+Functions to controls LED clusters
+	
+    gh60_caps_led_on()
+    gh60_poker_leds_on()
+    gh60_fn_led_on()
+    gh60_esc_led_on()
+    gh60_wasd_leds_on()
+    
+    gh60_caps_led_off()
+    gh60_poker_leds_off()
+    gh60_fn_led_off()
+    gh60_esc_led_off()
+    gh60_wasd_leds_off()
+	
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/infinity_chibios/chconf.h b/keyboards/infinity_chibios/chconf.h
index b886c383bb..43c845739a 100644
--- a/keyboards/infinity_chibios/chconf.h
+++ b/keyboards/infinity_chibios/chconf.h
@@ -1,524 +1,524 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/chconf.h

- * @brief   Configuration file template.

- * @details A copy of this file must be placed in each project directory, it

- *          contains the application specific kernel settings.

- *

- * @addtogroup config

- * @details Kernel related settings and hooks.

- * @{

- */

-

-#ifndef CHCONF_H

-#define CHCONF_H

-

-#define _CHIBIOS_RT_CONF_

-

-/*===========================================================================*/

-/**

- * @name System timers settings

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   System time counter resolution.

- * @note    Allowed values are 16 or 32 bits.

- */

-#define CH_CFG_ST_RESOLUTION                32

-

-/**

- * @brief   System tick frequency.

- * @details Frequency of the system timer that drives the system ticks. This

- *          setting also defines the system tick time unit.

- */

-#define CH_CFG_ST_FREQUENCY                 1000

-

-/**

- * @brief   Time delta constant for the tick-less mode.

- * @note    If this value is zero then the system uses the classic

- *          periodic tick. This value represents the minimum number

- *          of ticks that is safe to specify in a timeout directive.

- *          The value one is not valid, timeouts are rounded up to

- *          this value.

- */

-#define CH_CFG_ST_TIMEDELTA                 0

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel parameters and options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Round robin interval.

- * @details This constant is the number of system ticks allowed for the

- *          threads before preemption occurs. Setting this value to zero

- *          disables the preemption for threads with equal priority and the

- *          round robin becomes cooperative. Note that higher priority

- *          threads can still preempt, the kernel is always preemptive.

- * @note    Disabling the round robin preemption makes the kernel more compact

- *          and generally faster.

- * @note    The round robin preemption is not supported in tickless mode and

- *          must be set to zero in that case.

- */

-#define CH_CFG_TIME_QUANTUM                 20

-

-/**

- * @brief   Managed RAM size.

- * @details Size of the RAM area to be managed by the OS. If set to zero

- *          then the whole available RAM is used. The core memory is made

- *          available to the heap allocator and/or can be used directly through

- *          the simplified core memory allocator.

- *

- * @note    In order to let the OS manage the whole RAM the linker script must

- *          provide the @p __heap_base__ and @p __heap_end__ symbols.

- * @note    Requires @p CH_CFG_USE_MEMCORE.

- */

-#define CH_CFG_MEMCORE_SIZE                 0

-

-/**

- * @brief   Idle thread automatic spawn suppression.

- * @details When this option is activated the function @p chSysInit()

- *          does not spawn the idle thread. The application @p main()

- *          function becomes the idle thread and must implement an

- *          infinite loop.

- */

-#define CH_CFG_NO_IDLE_THREAD               FALSE

-

-/* Use __WFI in the idle thread for waiting. Does lower the power

- * consumption. */

-#define CORTEX_ENABLE_WFI_IDLE              TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Performance options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   OS optimization.

- * @details If enabled then time efficient rather than space efficient code

- *          is used when two possible implementations exist.

- *

- * @note    This is not related to the compiler optimization options.

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_OPTIMIZE_SPEED               TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Subsystem options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Time Measurement APIs.

- * @details If enabled then the time measurement APIs are included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_TM                       FALSE

-

-/**

- * @brief   Threads registry APIs.

- * @details If enabled then the registry APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_REGISTRY                 TRUE

-

-/**

- * @brief   Threads synchronization APIs.

- * @details If enabled then the @p chThdWait() function is included in

- *          the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_WAITEXIT                 TRUE

-

-/**

- * @brief   Semaphores APIs.

- * @details If enabled then the Semaphores APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_SEMAPHORES               TRUE

-

-/**

- * @brief   Semaphores queuing mode.

- * @details If enabled then the threads are enqueued on semaphores by

- *          priority rather than in FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

-

-/**

- * @brief   Mutexes APIs.

- * @details If enabled then the mutexes APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MUTEXES                  TRUE

-

-/**

- * @brief   Enables recursive behavior on mutexes.

- * @note    Recursive mutexes are heavier and have an increased

- *          memory footprint.

- *

- * @note    The default is @p FALSE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

-

-/**

- * @brief   Conditional Variables APIs.

- * @details If enabled then the conditional variables APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MUTEXES.

- */

-#define CH_CFG_USE_CONDVARS                 TRUE

-

-/**

- * @brief   Conditional Variables APIs with timeout.

- * @details If enabled then the conditional variables APIs with timeout

- *          specification are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_CONDVARS.

- */

-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

-

-/**

- * @brief   Events Flags APIs.

- * @details If enabled then the event flags APIs are included in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_EVENTS                   TRUE

-

-/**

- * @brief   Events Flags APIs with timeout.

- * @details If enabled then the events APIs with timeout specification

- *          are included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_EVENTS.

- */

-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

-

-/**

- * @brief   Synchronous Messages APIs.

- * @details If enabled then the synchronous messages APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MESSAGES                 TRUE

-

-/**

- * @brief   Synchronous Messages queuing mode.

- * @details If enabled then messages are served by priority rather than in

- *          FIFO order.

- *

- * @note    The default is @p FALSE. Enable this if you have special

- *          requirements.

- * @note    Requires @p CH_CFG_USE_MESSAGES.

- */

-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

-

-/**

- * @brief   Mailboxes APIs.

- * @details If enabled then the asynchronous messages (mailboxes) APIs are

- *          included in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_SEMAPHORES.

- */

-#define CH_CFG_USE_MAILBOXES                TRUE

-

-/**

- * @brief   Core Memory Manager APIs.

- * @details If enabled then the core memory manager APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMCORE                  TRUE

-

-/**

- * @brief   Heap Allocator APIs.

- * @details If enabled then the memory heap allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

- *          @p CH_CFG_USE_SEMAPHORES.

- * @note    Mutexes are recommended.

- */

-#define CH_CFG_USE_HEAP                     TRUE

-

-/**

- * @brief   Memory Pools Allocator APIs.

- * @details If enabled then the memory pools allocator APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- */

-#define CH_CFG_USE_MEMPOOLS                 TRUE

-

-/**

- * @brief   Dynamic Threads APIs.

- * @details If enabled then the dynamic threads creation APIs are included

- *          in the kernel.

- *

- * @note    The default is @p TRUE.

- * @note    Requires @p CH_CFG_USE_WAITEXIT.

- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

- */

-#define CH_CFG_USE_DYNAMIC                  TRUE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Debug options

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Debug option, kernel statistics.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_STATISTICS                   FALSE

-

-/**

- * @brief   Debug option, system state check.

- * @details If enabled the correct call protocol for system APIs is checked

- *          at runtime.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE

-

-/**

- * @brief   Debug option, parameters checks.

- * @details If enabled then the checks on the API functions input

- *          parameters are activated.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_CHECKS                FALSE

-

-/**

- * @brief   Debug option, consistency checks.

- * @details If enabled then all the assertions in the kernel code are

- *          activated. This includes consistency checks inside the kernel,

- *          runtime anomalies and port-defined checks.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_ENABLE_ASSERTS               FALSE

-

-/**

- * @brief   Debug option, trace buffer.

- * @details If enabled then the trace buffer is activated.

- *

- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED

-

-/**

- * @brief   Trace buffer entries.

- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is

- *          different from @p CH_DBG_TRACE_MASK_DISABLED.

- */

-#define CH_DBG_TRACE_BUFFER_SIZE            128

-

-/**

- * @brief   Debug option, stack checks.

- * @details If enabled then a runtime stack check is performed.

- *

- * @note    The default is @p FALSE.

- * @note    The stack check is performed in a architecture/port dependent way.

- *          It may not be implemented or some ports.

- * @note    The default failure mode is to halt the system with the global

- *          @p panic_msg variable set to @p NULL.

- */

-#define CH_DBG_ENABLE_STACK_CHECK           FALSE

-

-/**

- * @brief   Debug option, stacks initialization.

- * @details If enabled then the threads working area is filled with a byte

- *          value when a thread is created. This can be useful for the

- *          runtime measurement of the used stack.

- *

- * @note    The default is @p FALSE.

- */

-#define CH_DBG_FILL_THREADS                 FALSE

-

-/**

- * @brief   Debug option, threads profiling.

- * @details If enabled then a field is added to the @p thread_t structure that

- *          counts the system ticks occurred while executing the thread.

- *

- * @note    The default is @p FALSE.

- * @note    This debug option is not currently compatible with the

- *          tickless mode.

- */

-#define CH_DBG_THREADS_PROFILING            FALSE

-

-/** @} */

-

-/*===========================================================================*/

-/**

- * @name Kernel hooks

- * @{

- */

-/*===========================================================================*/

-

-/**

- * @brief   Threads descriptor structure extension.

- * @details User fields added to the end of the @p thread_t structure.

- */

-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

-  /* Add threads custom fields here.*/

-

-/**

- * @brief   Threads initialization hook.

- * @details User initialization code added to the @p chThdInit() API.

- *

- * @note    It is invoked from within @p chThdInit() and implicitly from all

- *          the threads creation APIs.

- */

-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

-  /* Add threads initialization code here.*/                                \

-}

-

-/**

- * @brief   Threads finalization hook.

- * @details User finalization code added to the @p chThdExit() API.

- */

-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

-  /* Add threads finalization code here.*/                                  \

-}

-

-/**

- * @brief   Context switch hook.

- * @details This hook is invoked just before switching between threads.

- */

-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

-  /* Context switch code here.*/                                            \

-}

-

-/**

- * @brief   ISR enter hook.

- */

-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \

-  /* IRQ prologue code here.*/                                              \

-}

-

-/**

- * @brief   ISR exit hook.

- */

-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \

-  /* IRQ epilogue code here.*/                                              \

-}

-

-/**

- * @brief   Idle thread enter hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to activate a power saving mode.

- */

-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

-  /* Idle-enter code here.*/                                                \

-}

-

-/**

- * @brief   Idle thread leave hook.

- * @note    This hook is invoked within a critical zone, no OS functions

- *          should be invoked from here.

- * @note    This macro can be used to deactivate a power saving mode.

- */

-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

-  /* Idle-leave code here.*/                                                \

-}

-

-/**

- * @brief   Idle Loop hook.

- * @details This hook is continuously invoked by the idle thread loop.

- */

-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

-  /* Idle loop code here.*/                                                 \

-}

-

-/**

- * @brief   System tick event hook.

- * @details This hook is invoked in the system tick handler immediately

- *          after processing the virtual timers queue.

- */

-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

-  /* System tick event code here.*/                                         \

-}

-

-/**

- * @brief   System halt hook.

- * @details This hook is invoked in case to a system halting error before

- *          the system is halted.

- */

-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

-  /* System halt code here.*/                                               \

-}

-

-/**

- * @brief   Trace hook.

- * @details This hook is invoked each time a new record is written in the

- *          trace buffer.

- */

-#define CH_CFG_TRACE_HOOK(tep) {                                            \

-  /* Trace code here.*/                                                     \

-}

-

-/** @} */

-

-/*===========================================================================*/

-/* Port-specific settings (override port settings defaulted in chcore.h).    */

-/*===========================================================================*/

-

-#endif  /* CHCONF_H */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE              TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/halconf.h b/keyboards/infinity_chibios/halconf.h
index 53538de149..46b37a4f46 100644
--- a/keyboards/infinity_chibios/halconf.h
+++ b/keyboards/infinity_chibios/halconf.h
@@ -1,353 +1,353 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    templates/halconf.h

- * @brief   HAL configuration header.

- * @details HAL configuration file, this file allows to enable or disable the

- *          various device drivers from your application. You may also use

- *          this file in order to override the device drivers default settings.

- *

- * @addtogroup HAL_CONF

- * @{

- */

-

-#ifndef _HALCONF_H_

-#define _HALCONF_H_

-

-#include "mcuconf.h"

-

-/**

- * @brief   Enables the PAL subsystem.

- */

-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

-#define HAL_USE_PAL                 TRUE

-#endif

-

-/**

- * @brief   Enables the ADC subsystem.

- */

-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

-#define HAL_USE_ADC                 FALSE

-#endif

-

-/**

- * @brief   Enables the CAN subsystem.

- */

-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

-#define HAL_USE_CAN                 FALSE

-#endif

-

-/**

- * @brief   Enables the DAC subsystem.

- */

-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

-#define HAL_USE_DAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the EXT subsystem.

- */

-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

-#define HAL_USE_EXT                 FALSE

-#endif

-

-/**

- * @brief   Enables the GPT subsystem.

- */

-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

-#define HAL_USE_GPT                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2C subsystem.

- */

-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

-#define HAL_USE_I2C                 FALSE

-#endif

-

-/**

- * @brief   Enables the I2S subsystem.

- */

-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

-#define HAL_USE_I2S                 FALSE

-#endif

-

-/**

- * @brief   Enables the ICU subsystem.

- */

-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

-#define HAL_USE_ICU                 FALSE

-#endif

-

-/**

- * @brief   Enables the MAC subsystem.

- */

-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

-#define HAL_USE_MAC                 FALSE

-#endif

-

-/**

- * @brief   Enables the MMC_SPI subsystem.

- */

-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_MMC_SPI             FALSE

-#endif

-

-/**

- * @brief   Enables the PWM subsystem.

- */

-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

-#define HAL_USE_PWM                 FALSE

-#endif

-

-/**

- * @brief   Enables the RTC subsystem.

- */

-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

-#define HAL_USE_RTC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SDC subsystem.

- */

-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

-#define HAL_USE_SDC                 FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL subsystem.

- */

-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL              FALSE

-#endif

-

-/**

- * @brief   Enables the SERIAL over USB subsystem.

- */

-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

-#define HAL_USE_SERIAL_USB          TRUE

-#endif

-

-/**

- * @brief   Enables the SPI subsystem.

- */

-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

-#define HAL_USE_SPI                 FALSE

-#endif

-

-/**

- * @brief   Enables the UART subsystem.

- */

-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

-#define HAL_USE_UART                FALSE

-#endif

-

-/**

- * @brief   Enables the USB subsystem.

- */

-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

-#define HAL_USE_USB                 TRUE

-#endif

-

-/**

- * @brief   Enables the WDG subsystem.

- */

-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

-#define HAL_USE_WDG                 FALSE

-#endif

-

-/*===========================================================================*/

-/* ADC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)

-#define ADC_USE_WAIT                TRUE

-#endif

-

-/**

- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define ADC_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* CAN driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Sleep mode related APIs inclusion switch.

- */

-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)

-#define CAN_USE_SLEEP_MODE          TRUE

-#endif

-

-/*===========================================================================*/

-/* I2C driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables the mutual exclusion APIs on the I2C bus.

- */

-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define I2C_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* MAC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables an event sources for incoming packets.

- */

-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)

-#define MAC_USE_ZERO_COPY           FALSE

-#endif

-

-/**

- * @brief   Enables an event sources for incoming packets.

- */

-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)

-#define MAC_USE_EVENTS              TRUE

-#endif

-

-/*===========================================================================*/

-/* MMC_SPI driver related settings.                                          */

-/*===========================================================================*/

-

-/**

- * @brief   Delays insertions.

- * @details If enabled this options inserts delays into the MMC waiting

- *          routines releasing some extra CPU time for the threads with

- *          lower priority, this may slow down the driver a bit however.

- *          This option is recommended also if the SPI driver does not

- *          use a DMA channel and heavily loads the CPU.

- */

-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)

-#define MMC_NICE_WAITING            TRUE

-#endif

-

-/*===========================================================================*/

-/* SDC driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Number of initialization attempts before rejecting the card.

- * @note    Attempts are performed at 10mS intervals.

- */

-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)

-#define SDC_INIT_RETRY              100

-#endif

-

-/**

- * @brief   Include support for MMC cards.

- * @note    MMC support is not yet implemented so this option must be kept

- *          at @p FALSE.

- */

-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)

-#define SDC_MMC_SUPPORT             FALSE

-#endif

-

-/**

- * @brief   Delays insertions.

- * @details If enabled this options inserts delays into the MMC waiting

- *          routines releasing some extra CPU time for the threads with

- *          lower priority, this may slow down the driver a bit however.

- */

-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)

-#define SDC_NICE_WAITING            TRUE

-#endif

-

-/*===========================================================================*/

-/* SERIAL driver related settings.                                           */

-/*===========================================================================*/

-

-/**

- * @brief   Default bit rate.

- * @details Configuration parameter, this is the baud rate selected for the

- *          default configuration.

- */

-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)

-#define SERIAL_DEFAULT_BITRATE      38400

-#endif

-

-/**

- * @brief   Serial buffers size.

- * @details Configuration parameter, you can change the depth of the queue

- *          buffers depending on the requirements of your application.

- * @note    The default is 64 bytes for both the transmission and receive

- *          buffers.

- */

-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

-#define SERIAL_BUFFERS_SIZE         16

-#endif

-

-/*===========================================================================*/

-/* SERIAL_USB driver related setting.                                        */

-/*===========================================================================*/

-

-/**

- * @brief   Serial over USB buffers size.

- * @details Configuration parameter, the buffer size must be a multiple of

- *          the USB data endpoint maximum packet size.

- * @note    The default is 64 bytes for both the transmission and receive

- *          buffers.

- */

-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)

-#define SERIAL_USB_BUFFERS_SIZE     256

-#endif

-

-/*===========================================================================*/

-/* SPI driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)

-#define SPI_USE_WAIT                TRUE

-#endif

-

-/**

- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

-#define SPI_USE_MUTUAL_EXCLUSION    TRUE

-#endif

-

-/*===========================================================================*/

-/* USB driver related settings.                                              */

-/*===========================================================================*/

-

-/**

- * @brief   Enables synchronous APIs.

- * @note    Disabling this option saves both code and data space.

- */

-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

-#define USB_USE_WAIT                TRUE

-#endif

-

-#endif /* _HALCONF_H_ */

-

-/** @} */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 64 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/infinity_chibios/mcuconf.h b/keyboards/infinity_chibios/mcuconf.h
index 66b6ce25de..f453304b75 100644
--- a/keyboards/infinity_chibios/mcuconf.h
+++ b/keyboards/infinity_chibios/mcuconf.h
@@ -1,55 +1,55 @@
-/*

-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _MCUCONF_H_

-#define _MCUCONF_H_

-

-#define K20x_MCUCONF

-

-/*

- * HAL driver system settings.

- */

-

-/* Select the MCU clocking mode below by enabling the appropriate block. */

-

-#define KINETIS_NO_INIT             FALSE

-

-/* FEI mode - 48 MHz with internal 32.768 kHz crystal */

-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI

-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */

-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */

-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */

-#define KINETIS_CLKDIV1_OUTDIV1     1

-#define KINETIS_CLKDIV1_OUTDIV2     1

-#define KINETIS_CLKDIV1_OUTDIV4     2

-#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY

-#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2

-

-/*

- * SERIAL driver system settings.

- */

-#define KINETIS_SERIAL_USE_UART0            TRUE

-

-/*

- * USB driver settings

- */

-#define KINETIS_USB_USE_USB0                TRUE

-/* Need to redefine this, since the default is for K20x */

-/* This is for Teensy LC; you should comment it out (or change to 5)

- * for Teensy 3.x */

-#define KINETIS_USB_USB0_IRQ_PRIORITY       2

-

-#endif /* _MCUCONF_H_ */

+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1
+#define KINETIS_CLKDIV1_OUTDIV2     1
+#define KINETIS_CLKDIV1_OUTDIV4     2
+#define KINETIS_BUSCLK_FREQUENCY    KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY  KINETIS_SYSCLK_FREQUENCY/2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY       2
+
+#endif /* _MCUCONF_H_ */