Move USB Host Shield and Arduino core to `lib/` (#13973)

1 files changed, 185 insertions, 0 deletions

diff --git a/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.h b/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.h
new file mode 100644
index 0000000000..8880d9e50a
--- /dev/null
+++ b/lib/usbhost/USB_Host_Shield_2.0/PSBuzz.h
@@ -0,0 +1,185 @@
+/* Copyright (C) 2014 Kristian Lauszus, TKJ Electronics. All rights reserved.
+
+ This software may be distributed and modified under the terms of the GNU
+ General Public License version 2 (GPL2) as published by the Free Software
+ Foundation and appearing in the file GPL2.TXT included in the packaging of
+ this file. Please note that GPL2 Section 2[b] requires that all works based
+ on this software must also be made publicly available under the terms of
+ the GPL2 ("Copyleft").
+
+ Contact information
+ -------------------
+
+ Kristian Lauszus, TKJ Electronics
+ Web      :  http://www.tkjelectronics.com
+ e-mail   :  kristianl@tkjelectronics.com
+ */
+
+#ifndef _psbuzz_h_
+#define _psbuzz_h_
+
+#include "hiduniversal.h"
+#include "controllerEnums.h"
+
+#define PSBUZZ_VID 0x054C // Sony Corporation
+#define PSBUZZ_PID 0x1000 // PS Buzz Controller
+
+/** Struct used to easily read the different buttons on the controllers */
+union PSBUZZButtons {
+        struct {
+                uint8_t red : 1;
+                uint8_t yellow : 1;
+                uint8_t green : 1;
+                uint8_t orange : 1;
+                uint8_t blue : 1;
+        } __attribute__((packed)) btn[4];
+        uint32_t val : 20;
+} __attribute__((packed));
+
+/**
+ * This class implements support for the PS Buzz controllers via USB.
+ * It uses the HIDUniversal class for all the USB communication.
+ */
+class PSBuzz : public HIDUniversal {
+public:
+        /**
+         * Constructor for the PSBuzz class.
+         * @param  p   Pointer to the USB class instance.
+         */
+        PSBuzz(USB *p) :
+        HIDUniversal(p) {
+                Reset();
+        };
+
+        /**
+         * Used to check if a PS Buzz controller is connected.
+         * @return Returns true if it is connected.
+         */
+        bool connected() {
+                return HIDUniversal::isReady() && HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID;
+        };
+
+        /**
+         * Used to call your own function when the device is successfully initialized.
+         * @param funcOnInit Function to call.
+         */
+        void attachOnInit(void (*funcOnInit)(void)) {
+                pFuncOnInit = funcOnInit;
+        };
+
+        /** @name PS Buzzer Controller functions */
+        /**
+         * getButtonPress(ButtonEnum b) will return true as long as the button is held down.
+         *
+         * While getButtonClick(ButtonEnum b) will only return it once.
+         *
+         * So you instance if you need to increase a variable once you would use getButtonClick(ButtonEnum b),
+         * but if you need to drive a robot forward you would use getButtonPress(ButtonEnum b).
+         * @param  b          ::ButtonEnum to read.
+         * @param  controller The controller to read from. Default to 0.
+         * @return            getButtonPress(ButtonEnum b) will return a true as long as a button is held down, while getButtonClick(ButtonEnum b) will return true once for each button press.
+         */
+        bool getButtonPress(ButtonEnum b, uint8_t controller = 0);
+        bool getButtonClick(ButtonEnum b, uint8_t controller = 0);
+        /**@}*/
+        /** @name PS Buzzer Controller functions */
+        /**
+         * Set LED value without using ::LEDEnum.
+         * @param value See: ::LEDEnum.
+         */
+        /**
+         * Set LED values directly.
+         * @param value      Used to set whenever the LED should be on or off
+         * @param controller The controller to control. Defaults to 0.
+         */
+        void setLedRaw(bool value, uint8_t controller = 0);
+
+        /** Turn all LEDs off. */
+        void setLedOffAll() {
+                for (uint8_t i = 1; i < 4; i++) // Skip first as it will be set in setLedRaw
+                        ledState[i] = false; // Just an easy way to set all four off at the same time
+                setLedRaw(false); // Turn the LED off, on all four controllers
+        };
+
+        /**
+         * Turn the LED off on a specific controller.
+         * @param controller The controller to turn off. Defaults to 0.
+         */
+        void setLedOff(uint8_t controller = 0) {
+                setLedRaw(false, controller);
+        };
+
+
+        /** Turn all LEDs on. */
+        void setLedOnAll() {
+                for (uint8_t i = 1; i < 4; i++) // Skip first as it will be set in setLedRaw
+                        ledState[i] = true; // Just an easy way to set all four off at the same time
+                setLedRaw(true); // Turn the LED on, on all four controllers
+        };
+
+        /**
+         * Turn the LED on on a specific controller.
+         * @param controller The controller to turn off. Defaults to 0.
+         */
+        void setLedOn(uint8_t controller = 0) {
+                setLedRaw(true, controller);
+        };
+
+        /**
+         * Toggle the LED on a specific controller.
+         * @param controller The controller to turn off. Defaults to 0.
+         */
+        void setLedToggle(uint8_t controller = 0) {
+                setLedRaw(!ledState[controller], controller);
+        };
+        /**@}*/
+
+protected:
+        /** @name HIDUniversal implementation */
+        /**
+         * Used to parse USB HID data.
+         * @param hid       Pointer to the HID class.
+         * @param is_rpt_id Only used for Hubs.
+         * @param len       The length of the incoming data.
+         * @param buf       Pointer to the data buffer.
+         */
+        void ParseHIDData(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf);
+
+        /**
+         * Called when a device is successfully initialized.
+         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
+         * This is useful for instance if you want to set the LEDs in a specific way.
+         */
+        uint8_t OnInitSuccessful();
+        /**@}*/
+
+        /** Used to reset the different buffers to their default values */
+        void Reset() {
+                psbuzzButtons.val = 0;
+                oldButtonState.val = 0;
+                buttonClickState.val = 0;
+                for (uint8_t i = 0; i < sizeof(ledState); i++)
+                        ledState[i] = 0;
+        };
+
+        /** @name USBDeviceConfig implementation */
+        /**
+         * Used by the USB core to check what this driver support.
+         * @param  vid The device's VID.
+         * @param  pid The device's PID.
+         * @return     Returns true if the device's VID and PID matches this driver.
+         */
+        virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
+                return (vid == PSBUZZ_VID && pid == PSBUZZ_PID);
+        };
+        /**@}*/
+
+private:
+        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
+
+        void PSBuzz_Command(uint8_t *data, uint16_t nbytes);
+
+        PSBUZZButtons psbuzzButtons, oldButtonState, buttonClickState;
+        bool ledState[4];
+};
+#endif