diff options
author | Nick Brassel <nick@tzarc.org> | 2022-07-02 15:18:50 +1000 |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-07-02 15:18:50 +1000 |
commit | 5846b40f7444af96b0d8ddf3af9b558193c2475d (patch) | |
tree | 7bec13529ef3654ed290e68617eb1c659c05a49d /platforms | |
parent | 9f1c4f304d0597b7024d079eb358bb0c71be3ce8 (diff) | |
download | qmk_firmware-5846b40f7444af96b0d8ddf3af9b558193c2475d.tar.gz qmk_firmware-5846b40f7444af96b0d8ddf3af9b558193c2475d.zip |
RP2040 emulated EEPROM. (#17519)
Diffstat (limited to 'platforms')
8 files changed, 431 insertions, 6 deletions
diff --git a/platforms/chibios/boards/common/ld/RP2040_FLASH_TIMECRIT.ld b/platforms/chibios/boards/common/ld/RP2040_FLASH_TIMECRIT.ld new file mode 100644 index 0000000000..66ed4ce086 --- /dev/null +++ b/platforms/chibios/boards/common/ld/RP2040_FLASH_TIMECRIT.ld @@ -0,0 +1,117 @@ +/* + ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * RP2040 memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x00000000, len = 16k /* ROM */ + flash1 (rx) : org = 0x10000000, len = DEFINED(FLASH_LEN) ? FLASH_LEN : 2048k /* XIP */ + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 256k /* SRAM0 striped */ + ram1 (wx) : org = 0x00000000, len = 256k /* SRAM0 non striped */ + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x20040000, len = 4k /* SRAM4 */ + ram5 (wx) : org = 0x20041000, len = 4k /* SRAM5 */ + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x20041f00, len = 256 /* SRAM5 boot */ +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash1); +REGION_ALIAS("VECTORS_FLASH_LMA", flash1); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash1); +REGION_ALIAS("XTORS_FLASH_LMA", flash1); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash1); +REGION_ALIAS("TEXT_FLASH_LMA", flash1); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash1); +REGION_ALIAS("RODATA_FLASH_LMA", flash1); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash1); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash1); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash1); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram4); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("C1_MAIN_STACK_RAM", ram5); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("C1_PROCESS_STACK_RAM", ram5); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash1); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +SECTIONS +{ + .flash_begin : { + __flash_binary_start = .; + } > flash1 + + .boot2 : { + __boot2_start__ = .; + KEEP (*(.boot2)) + __boot2_end__ = .; + } > flash1 +} + +/* Generic rules inclusion.*/ +INCLUDE rules_stacks.ld +INCLUDE rules_stacks_c1.ld +INCLUDE RP2040_rules_code_with_boot2.ld +INCLUDE RP2040_rules_data_with_timecrit.ld +INCLUDE rules_memory.ld + +SECTIONS +{ + .flash_end : { + __flash_binary_end = .; + } > flash1 +} diff --git a/platforms/chibios/boards/common/ld/RP2040_rules_data_with_timecrit.ld b/platforms/chibios/boards/common/ld/RP2040_rules_data_with_timecrit.ld new file mode 100644 index 0000000000..a9a47be983 --- /dev/null +++ b/platforms/chibios/boards/common/ld/RP2040_rules_data_with_timecrit.ld @@ -0,0 +1,46 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +SECTIONS +{ + .data : ALIGN(4) + { + PROVIDE(_textdata = LOADADDR(.data)); + PROVIDE(_data = .); + __textdata_base__ = LOADADDR(.data); + __data_base__ = .; + *(vtable) + *(.time_critical*) + . = ALIGN(4); + *(.data) + *(.data.*) + *(.ramtext) + . = ALIGN(4); + PROVIDE(_edata = .); + __data_end__ = .; + } > DATA_RAM AT > DATA_RAM_LMA + + .bss (NOLOAD) : ALIGN(4) + { + __bss_base__ = .; + *(.bss) + *(.bss.*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + PROVIDE(end = .); + } > BSS_RAM +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c new file mode 100644 index 0000000000..640628e1e9 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c @@ -0,0 +1,221 @@ +/** + * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2022 Nick Brassel (@tzarc) + * Copyright (c) 2022 Stefan Kerkmann (@KarlK90) + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "pico/bootrom.h" +#include "hardware/flash.h" +#include "hardware/sync.h" +#include "hardware/structs/ssi.h" +#include "hardware/structs/ioqspi.h" + +#include <stdbool.h> +#include "timer.h" +#include "wear_leveling.h" +#include "wear_leveling_internal.h" + +#ifndef WEAR_LEVELING_RP2040_FLASH_BULK_COUNT +# define WEAR_LEVELING_RP2040_FLASH_BULK_COUNT 64 +#endif // WEAR_LEVELING_RP2040_FLASH_BULK_COUNT + +#define FLASHCMD_PAGE_PROGRAM 0x02 +#define FLASHCMD_READ_STATUS 0x05 +#define FLASHCMD_WRITE_ENABLE 0x06 + +extern uint8_t BOOT2_ROM[256]; +static uint32_t BOOT2_ROM_RAM[64]; + +static ssi_hw_t *const ssi = (ssi_hw_t *)XIP_SSI_BASE; + +// Sanity check +check_hw_layout(ssi_hw_t, ssienr, SSI_SSIENR_OFFSET); +check_hw_layout(ssi_hw_t, spi_ctrlr0, SSI_SPI_CTRLR0_OFFSET); + +static void __no_inline_not_in_flash_func(flash_enable_xip_via_boot2)(void) { + ((void (*)(void))BOOT2_ROM_RAM + 1)(); +} + +// Bitbanging the chip select using IO overrides, in case RAM-resident IRQs +// are still running, and the FIFO bottoms out. (the bootrom does the same) +static void __no_inline_not_in_flash_func(flash_cs_force)(bool high) { + uint32_t field_val = high ? IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH : IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW; + hw_write_masked(&ioqspi_hw->io[1].ctrl, field_val << IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB, IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS); +} + +// Also allow any unbounded loops to check whether the above abort condition +// was asserted, and terminate early +static int __no_inline_not_in_flash_func(flash_was_aborted)(void) { + return *(io_rw_32 *)(IO_QSPI_BASE + IO_QSPI_GPIO_QSPI_SD1_CTRL_OFFSET) & IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_BITS; +} + +// Put bytes from one buffer, and get bytes into another buffer. +// These can be the same buffer. +// If tx is NULL then send zeroes. +// If rx is NULL then all read data will be dropped. +// +// If rx_skip is nonzero, this many bytes will first be consumed from the FIFO, +// before reading a further count bytes into *rx. +// E.g. if you have written a command+address just before calling this function. +static void __no_inline_not_in_flash_func(flash_put_get)(const uint8_t *tx, uint8_t *rx, size_t count, size_t rx_skip) { + // Make sure there is never more data in flight than the depth of the RX + // FIFO. Otherwise, when we are interrupted for long periods, hardware + // will overflow the RX FIFO. + const uint max_in_flight = 16 - 2; // account for data internal to SSI + size_t tx_count = count; + size_t rx_count = count; + while (tx_count || rx_skip || rx_count) { + // NB order of reads, for pessimism rather than optimism + uint32_t tx_level = ssi_hw->txflr; + uint32_t rx_level = ssi_hw->rxflr; + bool did_something = false; // Expect this to be folded into control flow, not register + if (tx_count && tx_level + rx_level < max_in_flight) { + ssi->dr0 = (uint32_t)(tx ? *tx++ : 0); + --tx_count; + did_something = true; + } + if (rx_level) { + uint8_t rxbyte = ssi->dr0; + did_something = true; + if (rx_skip) { + --rx_skip; + } else { + if (rx) *rx++ = rxbyte; + --rx_count; + } + } + // APB load costs 4 cycles, so only do it on idle loops (our budget is + // 48 cyc/byte) + if (!did_something && __builtin_expect(flash_was_aborted(), 0)) break; + } + flash_cs_force(1); +} + +// Convenience wrapper for above +// (And it's hard for the debug host to get the tight timing between +// cmd DR0 write and the remaining data) +static void __no_inline_not_in_flash_func(_flash_do_cmd)(uint8_t cmd, const uint8_t *tx, uint8_t *rx, size_t count) { + flash_cs_force(0); + ssi->dr0 = cmd; + flash_put_get(tx, rx, count, 1); +} + +// Timing of this one is critical, so do not expose the symbol to debugger etc +static void __no_inline_not_in_flash_func(flash_put_cmd_addr)(uint8_t cmd, uint32_t addr) { + flash_cs_force(0); + addr |= cmd << 24; + for (int i = 0; i < 4; ++i) { + ssi->dr0 = addr >> 24; + addr <<= 8; + } +} + +// Poll the flash status register until the busy bit (LSB) clears +static void __no_inline_not_in_flash_func(flash_wait_ready)(void) { + uint8_t stat; + do { + _flash_do_cmd(FLASHCMD_READ_STATUS, NULL, &stat, 1); + } while (stat & 0x1 && !flash_was_aborted()); +} + +// Set the WEL bit (needed before any program/erase operation) +static void __no_inline_not_in_flash_func(flash_enable_write)(void) { + _flash_do_cmd(FLASHCMD_WRITE_ENABLE, NULL, NULL, 0); +} + +static void __no_inline_not_in_flash_func(pico_program_bulk)(uint32_t flash_address, backing_store_int_t *values, size_t item_count) { + rom_connect_internal_flash_fn connect_internal_flash = (rom_connect_internal_flash_fn)rom_func_lookup_inline(ROM_FUNC_CONNECT_INTERNAL_FLASH); + rom_flash_exit_xip_fn flash_exit_xip = (rom_flash_exit_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_EXIT_XIP); + rom_flash_flush_cache_fn flash_flush_cache = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE); + assert(connect_internal_flash && flash_exit_xip && flash_flush_cache); + + static backing_store_int_t bulk_write_buffer[WEAR_LEVELING_RP2040_FLASH_BULK_COUNT]; + + while (item_count) { + size_t batch_size = MIN(item_count, WEAR_LEVELING_RP2040_FLASH_BULK_COUNT); + for (size_t i = 0; i < batch_size; i++, values++, item_count--) { + bulk_write_buffer[i] = ~(*values); + } + __compiler_memory_barrier(); + + connect_internal_flash(); + flash_exit_xip(); + flash_enable_write(); + + flash_put_cmd_addr(FLASHCMD_PAGE_PROGRAM, flash_address); + flash_put_get((uint8_t *)bulk_write_buffer, NULL, batch_size * sizeof(backing_store_int_t), 4); + flash_wait_ready(); + flash_address += batch_size * sizeof(backing_store_int_t); + + flash_flush_cache(); + flash_enable_xip_via_boot2(); + } +} + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// QMK Wear-Leveling Backing Store implementation + +static int interrupts; + +bool backing_store_init(void) { + bs_dprintf("Init\n"); + memcpy(BOOT2_ROM_RAM, BOOT2_ROM, sizeof(BOOT2_ROM)); + __compiler_memory_barrier(); + return true; +} + +bool backing_store_unlock(void) { + bs_dprintf("Unlock\n"); + return true; +} + +bool backing_store_erase(void) { +#ifdef WEAR_LEVELING_DEBUG_OUTPUT + uint32_t start = timer_read32(); +#endif + + // Ensure the backing size can be cleanly subtracted from the flash size without alignment issues. + _Static_assert((WEAR_LEVELING_BACKING_SIZE) % (FLASH_SECTOR_SIZE) == 0, "Backing size must be a multiple of FLASH_SECTOR_SIZE"); + + interrupts = save_and_disable_interrupts(); + flash_range_erase((WEAR_LEVELING_RP2040_FLASH_BASE), (WEAR_LEVELING_BACKING_SIZE)); + restore_interrupts(interrupts); + + bs_dprintf("Backing store erase took %ldms to complete\n", ((long)(timer_read32() - start))); + return true; +} + +bool backing_store_write(uint32_t address, backing_store_int_t value) { + return backing_store_write_bulk(address, &value, 1); +} + +bool backing_store_write_bulk(uint32_t address, backing_store_int_t *values, size_t item_count) { + uint32_t offset = (WEAR_LEVELING_RP2040_FLASH_BASE) + address; + bs_dprintf("Write "); + wl_dump(offset, values, sizeof(backing_store_int_t) * item_count); + interrupts = save_and_disable_interrupts(); + pico_program_bulk(offset, values, item_count); + restore_interrupts(interrupts); + return true; +} + +bool backing_store_lock(void) { + return true; +} + +bool backing_store_read(uint32_t address, backing_store_int_t *value) { + return backing_store_read_bulk(address, value, 1); +} + +bool backing_store_read_bulk(uint32_t address, backing_store_int_t *values, size_t item_count) { + uint32_t offset = (WEAR_LEVELING_RP2040_FLASH_BASE) + address; + backing_store_int_t *loc = (backing_store_int_t *)((XIP_BASE) + offset); + for (size_t i = 0; i < item_count; ++i) { + values[i] = ~loc[i]; + } + bs_dprintf("Read "); + wl_dump(offset, values, item_count * sizeof(backing_store_int_t)); + return true; +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h new file mode 100644 index 0000000000..93a9aa0372 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h @@ -0,0 +1,32 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifndef __ASSEMBLER__ +# include "hardware/flash.h" +#endif + +// 2-byte writes +#ifndef BACKING_STORE_WRITE_SIZE +# define BACKING_STORE_WRITE_SIZE 2 +#endif + +// 64kB backing space allocated +#ifndef WEAR_LEVELING_BACKING_SIZE +# define WEAR_LEVELING_BACKING_SIZE 8192 +#endif // WEAR_LEVELING_BACKING_SIZE + +// 32kB logical EEPROM +#ifndef WEAR_LEVELING_LOGICAL_SIZE +# define WEAR_LEVELING_LOGICAL_SIZE 4096 +#endif // WEAR_LEVELING_LOGICAL_SIZE + +// Define how much flash space we have (defaults to lib/pico-sdk/src/boards/include/boards/***) +#ifndef WEAR_LEVELING_RP2040_FLASH_SIZE +# define WEAR_LEVELING_RP2040_FLASH_SIZE (PICO_FLASH_SIZE_BYTES) +#endif + +// Define the location of emulated EEPROM +#ifndef WEAR_LEVELING_RP2040_FLASH_BASE +# define WEAR_LEVELING_RP2040_FLASH_BASE ((WEAR_LEVELING_RP2040_FLASH_SIZE) - (WEAR_LEVELING_BACKING_SIZE)) +#endif diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 32b8c5a946..63cc1a4b33 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -351,8 +351,11 @@ SHARED_CFLAGS = -fomit-frame-pointer \ -fno-common \ -fshort-wchar +LDSCRIPT_PATH := $(shell dirname "$(LDSCRIPT)") + # Shared Linker flags for all toolchains SHARED_LDFLAGS = -T $(LDSCRIPT) \ + -L $(LDSCRIPT_PATH) \ -Wl,--gc-sections \ -nostartfiles diff --git a/platforms/chibios/vendors/RP/RP2040.mk b/platforms/chibios/vendors/RP/RP2040.mk index 1aa925cb15..de426c9c40 100644 --- a/platforms/chibios/vendors/RP/RP2040.mk +++ b/platforms/chibios/vendors/RP/RP2040.mk @@ -24,6 +24,7 @@ PICOSDKROOT := $(TOP_DIR)/lib/pico-sdk PICOSDKSRC = $(PICOSDKROOT)/src/rp2_common/hardware_clocks/clocks.c \ $(PICOSDKROOT)/src/rp2_common/hardware_pll/pll.c \ $(PICOSDKROOT)/src/rp2_common/hardware_pio/pio.c \ + $(PICOSDKROOT)/src/rp2_common/hardware_flash/flash.c \ $(PICOSDKROOT)/src/rp2_common/hardware_gpio/gpio.c \ $(PICOSDKROOT)/src/rp2_common/hardware_claim/claim.c \ $(PICOSDKROOT)/src/rp2_common/hardware_watchdog/watchdog.c \ @@ -36,6 +37,7 @@ PICOSDKINC = $(CHIBIOS)//os/various/pico_bindings/dumb/include \ $(PICOSDKROOT)/src/rp2_common/hardware_base/include \ $(PICOSDKROOT)/src/rp2_common/hardware_clocks/include \ $(PICOSDKROOT)/src/rp2_common/hardware_claim/include \ + $(PICOSDKROOT)/src/rp2_common/hardware_flash/include \ $(PICOSDKROOT)/src/rp2_common/hardware_gpio/include \ $(PICOSDKROOT)/src/rp2_common/hardware_irq/include \ $(PICOSDKROOT)/src/rp2_common/hardware_pll/include \ diff --git a/platforms/chibios/vendors/RP/pico_sdk_shims.c b/platforms/chibios/vendors/RP/pico_sdk_shims.c index f6e3943928..239155c086 100644 --- a/platforms/chibios/vendors/RP/pico_sdk_shims.c +++ b/platforms/chibios/vendors/RP/pico_sdk_shims.c @@ -7,3 +7,7 @@ void panic(const char *fmt, ...) { chSysHalt(fmt); } + +void hard_assertion_failure(void) { + panic("hard assert"); +} diff --git a/platforms/chibios/vendors/RP/stage2_bootloaders.c b/platforms/chibios/vendors/RP/stage2_bootloaders.c index af679a0dc7..e65b0a5802 100644 --- a/platforms/chibios/vendors/RP/stage2_bootloaders.c +++ b/platforms/chibios/vendors/RP/stage2_bootloaders.c @@ -13,7 +13,7 @@ #if defined(RP2040_FLASH_AT25SF128A) -uint8_t BOOTLOADER_SECTION BOOT2_AT25SF128A[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x31, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60, 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2d, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x01, 0x21, 0xf0, 0x22, @@ -40,7 +40,7 @@ uint8_t BOOTLOADER_SECTION BOOT2_AT25SF128A[256] = { #elif defined(RP2040_FLASH_GD25Q64CS) -uint8_t BOOTLOADER_SECTION BOOT2_GD25Q64CS[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x31, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60, 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2d, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x01, 0x21, 0xf0, 0x22, @@ -67,7 +67,7 @@ uint8_t BOOTLOADER_SECTION BOOT2_GD25Q64CS[256] = { #elif defined(RP2040_FLASH_W25X10CL) -uint8_t BOOTLOADER_SECTION BOOT2_W25X10CL[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x14, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x12, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60, 0x11, 0x49, 0x12, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xbb, 0x21, 0x19, 0x66, 0x02, 0x21, @@ -94,7 +94,7 @@ uint8_t BOOTLOADER_SECTION BOOT2_W25X10CL[256] = { #elif defined(RP2040_FLASH_IS25LP080) -uint8_t BOOTLOADER_SECTION BOOT2_IS25LP080[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x2b, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x29, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x28, 0x48, 0x00, 0xf0, 0x42, 0xf8, 0x28, 0x4a, 0x90, 0x42, 0x12, 0xd0, 0x06, 0x21, 0x19, 0x66, @@ -121,7 +121,7 @@ uint8_t BOOTLOADER_SECTION BOOT2_IS25LP080[256] = { #elif defined(RP2040_FLASH_GENERIC_03H) -uint8_t BOOTLOADER_SECTION BOOT2_GENERIC_03H[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x0c, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x0a, 0x49, 0x19, 0x60, 0x0a, 0x49, 0x0b, 0x48, 0x01, 0x60, 0x00, 0x21, 0x59, 0x60, 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd0, @@ -148,7 +148,7 @@ uint8_t BOOTLOADER_SECTION BOOT2_GENERIC_03H[256] = { #else -uint8_t BOOTLOADER_SECTION BOOT2_W25Q080[256] = { +uint8_t BOOTLOADER_SECTION BOOT2_ROM[256] = { 0x00, 0xb5, 0x32, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60, 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2e, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x04, 0x21, 0x59, 0x61, 0x01, 0x21, 0xf0, 0x22, |