diff options
| author | David Hoelscher <infinityis@users.noreply.github.com> | 2022-08-17 19:01:54 -0500 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2022-08-18 01:01:54 +0100 |
| commit | a645301c827705b04c8f19182153a1962c5c7bcb (patch) | |
| tree | 362f73c19acfb25bbeaea96a630f8fab01154286 /platforms | |
| parent | 29f47f4cf3722b10538547ab0ecb6c0aae294c38 (diff) | |
| download | qmk_firmware-a645301c827705b04c8f19182153a1962c5c7bcb.tar.gz qmk_firmware-a645301c827705b04c8f19182153a1962c5c7bcb.zip | |
Add Bonsai C4 converter (#17711)
Diffstat (limited to 'platforms')
| -rw-r--r-- | platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h | 40 | ||||
| -rw-r--r-- | platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk | 4 |
2 files changed, 44 insertions, 0 deletions
diff --git a/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h b/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h new file mode 100644 index 0000000000..7e6b8ddaf2 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bonsai_c4/_pin_defs.h @@ -0,0 +1,40 @@ +// Copyright 2022 customMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 PAL_LINE(GPIOB, 7) +#define D2 PAL_LINE(GPIOA, 15) +// GND +// GND +#define D1 PAL_LINE(GPIOB, 9) +#define D0 PAL_LINE(GPIOB, 6) +#define D4 PAL_LINE(GPIOA, 4) +#define C6 PAL_LINE(GPIOB, 8) +#define D7 PAL_LINE(GPIOA, 3) +#define E6 PAL_LINE(GPIOB, 10) +#define B4 PAL_LINE(GPIOA, 8) +#define B5 PAL_LINE(GPIOB, 0) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOA, 7) +#define F5 PAL_LINE(GPIOA, 6) +#define F6 PAL_LINE(GPIOA, 5) +#define F7 PAL_LINE(GPIOA, 1) +#define B1 PAL_LINE(GPIOB, 13) +#define B3 PAL_LINE(GPIOB, 14) +#define B2 PAL_LINE(GPIOB, 15) +#define B6 PAL_LINE(GPIOB, 1) + +// LEDs (only D5/B2 uses an actual LED) +// Setting both RX and TX LEDs to the same pin as there +// is only one LED availble +// If this is undesirable, either B0 or B5 can be redefined by +// using #undef and #define to change its assignment +#define B0 PAL_LINE(GPIOB, 2) +#define D5 PAL_LINE(GPIOB, 2)
\ No newline at end of file diff --git a/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk b/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk new file mode 100644 index 0000000000..7410209b67 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bonsai_c4/converter.mk @@ -0,0 +1,4 @@ +# Proton C MCU settings for converting AVR projects +MCU := STM32F411 +BOARD := GENERIC_STM32_F411XE +BOOTLOADER := stm32-dfu
\ No newline at end of file |