Moved files to common, protocol and doc directory

7 files changed, 1593 insertions, 0 deletions

diff --git a/protocol/iwrap/iWRAP.txt b/protocol/iwrap/iWRAP.txt
new file mode 100644
index 0000000000..2a062d9d98
--- /dev/null
+++ b/protocol/iwrap/iWRAP.txt
@@ -0,0 +1,376 @@
+Bulegiga WT12
+=============
+WT12 is a bluetooth module from Bluegiga. http://www.bluegiga.com/
+
+iWRAP
+    higher layer interface for bluetooth firmware
+    communicate with UART
+
+iWRAP HID
+default setting
+    115200  8bit/n/1/n
+
+
+TODO
+----
+KiCAD circuit/PCB design
+power saving
+    AVR sleep(15ms by watch dog timer)
+    WT12 sleep
+    measuring current consumption
+    measuring battery life of normal usage/idle/intensive usage
+software reset/bootloarder
+LED indicator(chaging/paring/connecting)
+license confirmation of suart.c
+consumer page is not working
+authenticate method/SSP
+SPP keyboard support
+SPP debug console support
+mouse wheel feature request to Bluegiga
+
+
+Problems
+--------
+power consumption
+no consumer page support(bug?)
+no mouse wheel support
+no paring management
+no interactive auth method
+
+
+UART hardware flow control
+--------------------------
+(iWRAP4 User Guide 9.5)
+Hardware flow control is enabled by default and it should not be disabled unless mandatory, because without the hardware flow control the data transmission may not be reliable.
+If the hardware flow control is enabled from PS-keys, but no flow control is used, the following steps should be implemented in the hardware design:
+- CTS pin must be grounded
+- RTS pin must be left floating
+
+
+Power Saving
+------------
+power consume
+    without opimization: 4hr to shutdown(310mAh)
+    2011/08/25: 9hr(310mAh) SNIFF MASTER sleep/WDTO_120MS
+
+measure current consumption
+    HHKB keyswitch matrix board
+        idle
+        scanning
+    Bluegiga WT12 module
+        SLEEP command
+        deep sleep on/off in config bits
+
+HHKB keyswich
+    how to power off
+        I/O pin configuration when sleeping
+        FET switch for 5V regulator
+
+Bluetooth module
+    power off when in USB mode
+    power off by FET switch
+
+AVR configuration
+    unused pins
+    ADC
+    
+
+
+SET CONTROL CONFIG
+------------------
+    SET CONTROL CONFIG 4810
+    SET CONTROL CONFIG LIST
+    SET CONTROL CONFIG 0000 0000 4910 DEEP_SLEEP KLUDGE INTERACTIVE_PIN UART_LATENCY
+
+    Bit14   UART low latency
+    Bit11   Interactive pairing mode
+    Bit04   Deep sleep
+
+
+Reconnection
+------------
+SET CONTROL AUTOCALL 1124 5000 HID
+    1124    HID service class
+    5000    interval ms
+
+HID profile
+-----------
+This is needed to configure only once.
+    SET PROFILE HID ON
+    RESET
+
+HID class
+---------
+    SET BT CLASS 005C0  // keyboard/mouse combined devie
+
+Pairing Security
+----------------
+Secure Simple Pairing(SSP)
+    SET BT SSP 2 0  // Enables SSP for keyboard and Man-in-the-middle protection
+    SET BT SSP 3 0  // Enables SSP just works mode
+
+for keyboard with SSP
+    SET BT AUTH * 0000
+    SET BT SSP 2 0
+    SET CONTROL CONFIG 800
+    RESET
+
+for keyboard without SSP
+    SET BT AUTH * 0000
+    SET CONTROL CONFIG 800
+    RESET
+
+AUTH
+    AUTH xx:xx:xx:xx:xx:xx?         // Pairing request event
+    AUTH xx:xx:xx:xx:xx:xx  0000
+
+    SSP PASSKEY 78:dd:08:b7:e4:a2 ?
+    SSP PASSKEY 78:dd:08:b7:e4:a2 xxxxx
+    (SSP COMPLETE 78:dd:08:b7:e4:a2 HCI_ERROR_AUTH_FAIL     // failed)
+    RING 0 78:dd:08:b7:e4:a2 11 HID
+
+Connecton
+    RING xx:xx:xx:xx:xx:xx xx HID   // connection event
+
+    KILL xx:xx:xx:xx:xx:xx
+
+Mode
+----
+Command mode
+Data mode
+    Raw mode
+    (Simple mode         not for a real keyboard)
+
+Raw mode
+    Keyboard:
+    0x9f, length(10), 0xa1, 0x01, mods, 0x00, key1, key2, key3, key4, key5, key6
+
+    Mouse:
+    0x9f, length(5), 0xa1, 0x02, buttons, X, Y
+
+    Consumer page:
+    0x9f, length(5), 0xa1, 0x03, bitfield1, bitfield2, bitfield3
+
+    consumer page suage
+    Bitfield 1:
+        0x01 Volume Increment
+        0x02 Volume Decrement
+        0x04 Mute
+        0x08 Play/Pause
+        0x10 Scan Next Track
+        0x20 Scan Previous Track
+        0x40 Stop
+        0x80 Eject
+    Bitfield 2:
+        0x01 Email Reader
+        0x02 Application Control Search
+        0x04 AC Bookmarks
+        0x08 AC Home
+        0x10 AC Back
+        0x20 AC Forward
+        0x40 AC Stop
+        0x80 AC Refresh
+    Bitfield 3:
+        0x01 Application Launch Generic Consumer Control
+        0x02 AL Internet Browser
+        0x04 AL Calculator
+        0x08 AL Terminal Lock / Screensaver
+        0x10 AL Local Machine Browser
+        0x20 AC Minimize
+        0x40 Record
+        0x80 Rewind
+
+
+
+
+
+2011/07/13
+set
+SET BT BDADDR 00:07:80:47:22:14
+SET BT NAME HHKB pro BT
+SET BT CLASS 0005c0
+SET BT AUTH * 0000
+SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
+SET BT LAP 9e8b33
+SET BT PAGEMODE 4 2000 1
+SET BT PAIR 78:dd:08:b7:e4:a2 a191189cd7e51030ad6a07848ce879bb
+SET BT POWER 3 3 3
+SET BT ROLE 0 f 7d00
+SET BT SNIFF 0 20 1 8
+SET BT SSP 2 1
+SET BT MTU 667
+SET CONTROL AUTOCALL 1124 3000 HID
+SET CONTROL BAUD 38400,8n1
+SET CONTROL CD 00 0
+SET CONTROL ECHO 7
+SET CONTROL ESCAPE 43 00 1
+SET CONTROL GAIN 0 5
+SET CONTROL INIT SET CONTROL MUX 0
+SET CONTROL MSC DTE 00 00 00 00 00 00
+SET CONTROL MUX 1
+SET CONTROL PIO 00 00
+SET CONTROL READY 00
+SET PROFILE HID f HID
+SET
+
+info config
+
+!!! THIS IS BETA RELEASE AND MAY BE USED FOR EVALUATION PURPOSES ONLY !!!
+
+WRAP THOR AI (4.1.0 build 435)
+Copyright (c) 2003-2011 Bluegiga Technologies Inc.
+Compiled on Jun 28 2011 17:19:51, running on WT12-A module, psr v31
+        AVRCP BGIO FTP HFP HFP_AG HID HID_CONSUMER_PAGE HSP LEDS MAP OTA PBAP PIO=0x00fc SSP SUBRATE TEST VOLUME
+        - BOCK3 version 435 (Jun 28 2011 17:19:37) (max acl/sco 7/1)
+        - Bluetooth version 2.1, Power class 2
+        - Loader 4279, firmware 6297 (56-bit encryption), native execution mode
+        - up 0 days, 06:23, 2 connections (pool 2)
+        - User configuration:
+&028a = 0001 0000 0000 0011 0024 0000 0000 0010 0000 0080 0000 0000 0080 005f 009b 0034 00fb 0006
+&028b = 0000 0bb8
+&028d = 0001
+&0295 = 0000 0005 000b 0000 0003 0000 0000 0000 0000 0000 0000
+&0298 = a006
+&0299 = 0000 0000
+&02a3 = 0030 0030 0030 0030
+&02a4 = 009d 0000
+&02a5 = 0053 0045 0054 0020 0043 004f 004e 0054 0052 004f 004c 0020 004d 0055 0058 0020 0030
+&02a7 = 0000 05c0
+&02a8 = 4910 0000 0000
+&02aa = 0004 2000 0001 0033 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
+&02ac = 0000 0000 002b 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
+&02ad = 4848 424b 7020 6f72 4220 0054
+&02b3 = 0005 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
+&02b7 = 000f 4948 0044
+&02bb = 8000
+READY.
+
+
+
+
+2011/07/07 settings:
+set
+SET BT BDADDR 00:07:80:47:22:14
+SET BT NAME HHKB Pro BT
+SET BT CLASS 0005c0
+SET BT AUTH * 000
+SET BT IDENT BT:47 f000 4.0.0 Bluegiga iWRAP
+SET BT LAP 9e8b33
+SET BT PAGEMODE 4 2000 1
+SET BT PAIR 78:dd:08:b7:e4:a2 9e54d0aabb1b4d73cfccddb1ea4ef2d6
+SET BT POWER 3 3 3
+SET BT ROLE 0 f 7d00
+SET BT SNIFF 0 20 1 8
+SET BT SSP 3 0
+SET BT MTU 667
+SET CONTROL BAUD 38400,8n1
+SET CONTROL CD 00 0
+SET CONTROL ECHO 7
+SET CONTROL ESCAPE 255 00 1
+SET CONTROL GAIN 0 5
+SET CONTROL INIT set control mux 0
+SET CONTROL MSC DTE 00 00 00 00 00 00
+SET CONTROL PREAMP 1 1
+SET CONTROL READY 00
+SET PROFILE HID HID
+SET PROFILE SPP Bluetooth Serial Port
+SET
+
+info config
+WRAP THOR AI (4.0.0 build 317)
+Copyright (c) 2003-2010 Bluegiga Technologies Inc.
+Compiled on Apr 20 2010 16:44:28, running on WT12-A module, psr v31
+        AVRCP FTP PBAP PIO=0x00fc SSP SUBRATE VOLUME
+        - BOCK3 version 317 (Apr 20 2010 16:44:21) (max acl/sco 7/1)
+        - Bluetooth version 2.1, Power class 2
+        - Loader 4279, firmware 6297 (56-bit encryption), native execution mode
+        - up 0 days, 00:00, 0 connections (pool 1)
+        - User configuration:
+&028c = 0001 0020 0000 0001 0008 0000
+&028d = 0000
+&0296 = 0047 0001 f000 0400 6c42 6575 6967 6167 6920 5257 5041
+&0298 = c006
+&02a3 = 0030 0030 0030
+&02a4 = 009d 0000
+&02a5 = 0073 0065 0074 0020 0063 006f 006e 0074 0072 006f 006c 0020 006d 0075 0078 0020 0030
+&02a7 = 0000 05c0
+&02a8 = 0800 0000 0000
+&02ac = 0000 0000 00ff 0000 0000 0000 0000 0000 0000 0000 0002 0000 0000 0000 0010 0000 0000 0000 0000 029b 0000 0000 0000 0000
+&02ad = 4848 424b 5020 6f72 4220 0054
+&02b3 = 0004 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003 0003
+&02b7 = 0000
+&02bb = 6c42 6575 6f74 746f 2068 6553 6972 6c61 5020 726f 0074
+READY.
+
+
+
+2011/08/23:
+SET BT BDADDR 00:07:80:47:22:14
+SET BT NAME HHKB pro BT
+SET BT CLASS 0005c0
+SET BT AUTH * 0000
+SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
+SET BT LAP 9e8b33
+SET BT PAGEMODE 4 2000 1
+SET BT PAIRCOUNT 4
+SET BT POWER 3 3 3
+SET BT ROLE 1 f 12c0
+SET BT SNIFF 10 2 1 8
+SET BT SSP 3 0
+SET BT MTU 667
+SET CONTROL BAUD 38400,8n1
+SET CONTROL CD 00 0
+SET CONTROL ECHO 7
+SET CONTROL ESCAPE 43 00 1
+SET CONTROL GAIN 0 5
+SET CONTROL INIT SET CONTROL MUX 0
+SET CONTROL MSC DTE 00 00 00 00 00 00
+SET CONTROL MUX 1
+SET CONTROL PIO 00 00
+SET CONTROL READY 00
+SET PROFILE HID 7 HIDKeyboardMouse
+SET
+
+SET CONTROL CONFIG 0000 0004 481e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE DEEP_SLEEP INTERACTIVE_PIN UART_LATENCY 23D_NOKLUDGE
+
+
+
+2011/08/25:
+SET BT BDADDR 00:07:80:47:22:14
+SET BT NAME HHKB pro BT
+SET BT CLASS 0005c0
+
+SET BT IDENT BT:47 f000 4.1.0 Bluegiga iWRAP
+SET BT LAP 9e8b33
+SET BT PAGEMODE 4 2000 1
+SET BT PAIRCOUNT 4
+SET BT PAIR 78:dd:08:b7:e4:a2 0be83335a03fed8ededae42e99554e28
+SET BT POWER 3 3 3
+SET BT ROLE 1 f 12c0
+SET BT SNIFF 100 20 1 8
+SET BT SSP 3 0
+SET BT MTU 667
+SET CONTROL BAUD 38400,8n1
+SET CONTROL CD 00 0
+SET CONTROL ECHO 7
+SET CONTROL ESCAPE - 20 1
+SET CONTROL GAIN 0 5
+SET CONTROL INIT SET CONTROL MUX 0
+SET CONTROL MSC DTE 00 00 00 00 00 00
+SET CONTROL MUX 1
+SET CONTROL PIO 00 00
+SET CONTROL READY 00
+SET PROFILE HID f HIDKeyboardMouse
+SET
+
+
+SET CONTROL CONFIG 0000 0000 490e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE INTERACTIVE_PIN UART_LATENCY
+
+
+2011/09/08:
+SET CONTROL CONFIG 0000 0000 410e CLOCK_CACHE INTERLACED_INQ INTERLACED_PAGE KLUDGE UART_LATENCY
+
+    Removed INTERACTIVE_PIN to avoid interactive auth and use SET BT AUTH pin(0000).
+
+
+EOF
diff --git a/protocol/iwrap/iwrap.c b/protocol/iwrap/iwrap.c
new file mode 100644
index 0000000000..9c68761bf0
--- /dev/null
+++ b/protocol/iwrap/iwrap.c
@@ -0,0 +1,467 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* host driver for Bulegiga iWRAP */
+/* Bluegiga BT12
+ * Connections
+ *    Hardware UART       Software UART            BlueTooth
+ * PC=====UART=======AVR=====SUART====iWRAP(BT12)-----------PC
+ *
+ * - Hardware UART for Debug Console to communicate iWRAP
+ * - Software UART for iWRAP control to send keyboard/mouse data
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "usb_keycodes.h"
+#include "suart.h"
+#include "uart.h"
+#include "report.h"
+#include "host_driver.h"
+#include "iwrap.h"
+#include "print.h"
+
+
+/* iWRAP MUX mode utils. 3.10 HID raw mode(iWRAP_HID_Application_Note.pdf) */
+#define MUX_HEADER(LINK, LENGTH) do { \
+    xmit(0xbf);     /* SOF    */ \
+    xmit(LINK);     /* Link   */ \
+    xmit(0x00);     /* Flags  */ \
+    xmit(LENGTH);   /* Length */ \
+} while (0)
+#define MUX_FOOTER(LINK) xmit(LINK^0xff)
+
+
+static uint8_t connected = 0;
+//static uint8_t channel = 1;
+
+/* iWRAP buffer */
+#define MUX_BUF_SIZE 64
+static char buf[MUX_BUF_SIZE];
+static uint8_t snd_pos = 0;
+
+#define MUX_RCV_BUF_SIZE 256
+static char rcv_buf[MUX_RCV_BUF_SIZE];
+static uint8_t rcv_head = 0;
+static uint8_t rcv_tail = 0;
+
+
+/* receive buffer */
+static void rcv_enq(char c)
+{
+    uint8_t next = (rcv_head + 1) % MUX_RCV_BUF_SIZE;
+    if (next != rcv_tail) {
+        rcv_buf[rcv_head] = c;
+        rcv_head = next;
+    }
+}
+
+static char rcv_deq(void)
+{
+    char c = 0;
+    if (rcv_head != rcv_tail) {
+        c = rcv_buf[rcv_tail++];
+        rcv_tail %= MUX_RCV_BUF_SIZE;
+    }
+    return c;
+}
+
+/*
+static char rcv_peek(void)
+{
+    if (rcv_head == rcv_tail)
+        return 0;
+    return rcv_buf[rcv_tail];
+}
+*/
+
+static void rcv_clear(void)
+{
+    rcv_tail = rcv_head = 0;
+}
+
+/* iWRAP response */
+ISR(PCINT1_vect, ISR_BLOCK) // recv() runs away in case of ISR_NOBLOCK
+{
+    if ((SUART_IN_PIN & (1<<SUART_IN_BIT)))
+        return;
+
+    static volatile uint8_t mux_state = 0xff;
+    static volatile uint8_t mux_link = 0xff;
+    uint8_t c = recv();
+    switch (mux_state) {
+        case 0xff: // SOF
+            if (c == 0xbf)
+                mux_state--;
+            break;
+        case 0xfe: // Link
+            mux_state--;
+            mux_link = c;
+            break;
+        case 0xfd: // Flags
+            mux_state--;
+            break;
+        case 0xfc: // Length
+            mux_state = c;
+            break;
+        case 0x00:
+            mux_state = 0xff;
+            mux_link = 0xff;
+            break;
+        default:
+            if (mux_state--) {
+                uart_putchar(c);
+                rcv_enq(c);
+            }
+    }
+}
+
+
+/*------------------------------------------------------------------*
+ * iWRAP communication
+ *------------------------------------------------------------------*/
+void iwrap_init(void)
+{
+    // reset iWRAP if in already MUX mode after AVR software-reset
+    iwrap_send("RESET");
+    iwrap_mux_send("RESET");
+    _delay_ms(3000);
+    iwrap_send("\r\nSET CONTROL MUX 1\r\n");
+    _delay_ms(500);
+    iwrap_check_connection();
+}
+
+void iwrap_mux_send(const char *s)
+{
+    rcv_clear();
+    MUX_HEADER(0xff, strlen((char *)s));
+    iwrap_send(s);
+    MUX_FOOTER(0xff);
+}
+
+void iwrap_send(const char *s)
+{
+    while (*s)
+        xmit(*s++);
+}
+
+/* send buffer */
+void iwrap_buf_add(uint8_t c)
+{
+    // need space for '\0'
+    if (snd_pos < MUX_BUF_SIZE-1)
+        buf[snd_pos++] = c;
+}
+
+void iwrap_buf_del(void)
+{
+    if (snd_pos)
+        snd_pos--;
+}
+
+void iwrap_buf_send(void)
+{
+    buf[snd_pos] = '\0';
+    snd_pos = 0;
+    iwrap_mux_send(buf);
+}
+
+void iwrap_call(void)
+{
+    char *p;
+
+    iwrap_mux_send("SET BT PAIR");
+    _delay_ms(500);
+
+    p = rcv_buf + rcv_tail;
+    while (!strncmp(p, "SET BT PAIR", 11)) {
+        p += 7;
+        strncpy(p, "CALL", 4);
+        strncpy(p+22, " 11 HID\n\0", 9);
+        print_S(p);
+        iwrap_mux_send(p);
+        // TODO: skip to next line
+        p += 57;
+
+        DEBUG_LED_CONFIG;
+        DEBUG_LED_ON;
+        _delay_ms(500);
+        DEBUG_LED_OFF;
+        _delay_ms(500);
+        DEBUG_LED_ON;
+        _delay_ms(500);
+        DEBUG_LED_OFF;
+        _delay_ms(500);
+        DEBUG_LED_ON;
+        _delay_ms(500);
+        DEBUG_LED_OFF;
+        _delay_ms(500);
+        DEBUG_LED_ON;
+        _delay_ms(500);
+        DEBUG_LED_OFF;
+        _delay_ms(500);
+        DEBUG_LED_ON;
+        _delay_ms(500);
+        DEBUG_LED_OFF;
+        _delay_ms(500);
+    }
+    iwrap_check_connection();
+}
+
+void iwrap_kill(void)
+{
+    char c;
+    iwrap_mux_send("LIST");
+    _delay_ms(500);
+
+    while ((c = rcv_deq()) && c != '\n') ;
+    if (strncmp(rcv_buf + rcv_tail, "LIST ", 5)) {
+        print("no connection to kill.\n");
+        return;
+    }
+    // skip 10 'space' chars
+    for (uint8_t i = 10; i; i--)
+        while ((c = rcv_deq()) && c != ' ') ;
+
+    char *p = rcv_buf + rcv_tail - 5;
+    strncpy(p, "KILL ", 5);
+    strncpy(p + 22, "\n\0", 2);
+    print_S(p);
+    iwrap_mux_send(p);
+    _delay_ms(500);
+
+    iwrap_check_connection();
+}
+
+void iwrap_unpair(void)
+{
+    iwrap_mux_send("SET BT PAIR");
+    _delay_ms(500);
+
+    char *p = rcv_buf + rcv_tail;
+    if (!strncmp(p, "SET BT PAIR", 11)) {
+        strncpy(p+29, "\n\0", 2);
+        print_S(p);
+        iwrap_mux_send(p);
+    }
+}
+
+void iwrap_sleep(void)
+{
+    iwrap_mux_send("SLEEP");
+}
+
+void iwrap_sniff(void)
+{
+}
+
+void iwrap_subrate(void)
+{
+}
+
+bool iwrap_failed(void)
+{
+    if (strncmp(rcv_buf, "SYNTAX ERROR", 12))
+        return true;
+    else
+        return false;
+}
+
+uint8_t iwrap_connected(void)
+{
+    return connected;
+}
+
+uint8_t iwrap_check_connection(void)
+{
+    iwrap_mux_send("LIST");
+    _delay_ms(100);
+
+    if (strncmp(rcv_buf, "LIST ", 5) || !strncmp(rcv_buf, "LIST 0", 6))
+        connected = 0;
+    else
+        connected = 1;
+    return connected;
+}
+
+
+/*------------------------------------------------------------------*
+ * Host driver
+ *------------------------------------------------------------------*/
+static uint8_t keyboard_leds(void);
+static void send_keyboard(report_keyboard_t *report);
+static void send_mouse(report_mouse_t *report);
+static void send_system(uint16_t data);
+static void send_consumer(uint16_t data);
+
+static host_driver_t driver = {
+        keyboard_leds,
+        send_keyboard,
+        send_mouse,
+        send_system,
+        send_consumer
+};
+
+host_driver_t *iwrap_driver(void)
+{
+    return &driver;
+}
+
+static uint8_t keyboard_leds(void) {
+    return 0;
+}
+
+static void send_keyboard(report_keyboard_t *report)
+{
+    if (!iwrap_connected() && !iwrap_check_connection()) return;
+    MUX_HEADER(0x01, 0x0c);
+    // HID raw mode header
+    xmit(0x9f);
+    xmit(0x0a); // Length
+    xmit(0xa1); // keyboard report
+    xmit(0x01);
+    xmit(report->mods);
+    xmit(0x00); // reserved byte(always 0)
+    xmit(report->keys[0]);
+    xmit(report->keys[1]);
+    xmit(report->keys[2]);
+    xmit(report->keys[3]);
+    xmit(report->keys[4]);
+    xmit(report->keys[5]);
+    MUX_FOOTER(0x01);
+}
+
+static void send_mouse(report_mouse_t *report)
+{
+#if defined(MOUSEKEY_ENABLE) || defined(PS2_MOUSE_ENABLE)
+    if (!iwrap_connected() && !iwrap_check_connection()) return;
+    MUX_HEADER(0x01, 0x07);
+    // HID raw mode header
+    xmit(0x9f);
+    xmit(0x05); // Length
+    xmit(0xa1); // mouse report
+    xmit(0x02);
+    xmit(report->buttons);
+    xmit(report->x);
+    xmit(report->y);
+    MUX_FOOTER(0x01);
+#endif
+}
+
+static void send_system(uint16_t data)
+{
+    /* not supported */
+}
+
+static void send_consumer(uint16_t data)
+{
+#ifdef EXTRAKEY_ENABLE
+    static uint16_t last_data = 0;
+    uint8_t bits1 = 0;
+    uint8_t bits2 = 0;
+    uint8_t bits3 = 0;
+
+    if (!iwrap_connected() && !iwrap_check_connection()) return;
+    if (data == last_data) return;
+    last_data = data;
+
+    // 3.10 HID raw mode(iWRAP_HID_Application_Note.pdf)
+    switch (data) {
+        case AUDIO_VOL_UP:
+            bits1 = 0x01;
+            break;
+        case AUDIO_VOL_DOWN:
+            bits1 = 0x02;
+            break;
+        case AUDIO_MUTE:
+            bits1 = 0x04;
+            break;
+        case TRANSPORT_PLAY_PAUSE:
+            bits1 = 0x08;
+            break;
+        case TRANSPORT_NEXT_TRACK:
+            bits1 = 0x10;
+            break;
+        case TRANSPORT_PREV_TRACK:
+            bits1 = 0x20;
+            break;
+        case TRANSPORT_STOP:
+            bits1 = 0x40;
+            break;
+        case TRANSPORT_EJECT:
+            bits1 = 0x80;
+            break;
+        case AL_EMAIL:
+            bits2 = 0x01;
+            break;
+        case AC_SEARCH:
+            bits2 = 0x02;
+            break;
+        case AC_BOOKMARKS:
+            bits2 = 0x04;
+            break;
+        case AC_HOME:
+            bits2 = 0x08;
+            break;
+        case AC_BACK:
+            bits2 = 0x10;
+            break;
+        case AC_FORWARD:
+            bits2 = 0x20;
+            break;
+        case AC_STOP:
+            bits2 = 0x40;
+            break;
+        case AC_REFRESH:
+            bits2 = 0x80;
+            break;
+        case AL_CC_CONFIG:
+            bits3 = 0x01;
+            break;
+        case AL_CALCULATOR:
+            bits3 = 0x04;
+            break;
+        case AL_LOCK:
+            bits3 = 0x08;
+            break;
+        case AL_LOCAL_BROWSER:
+            bits3 = 0x10;
+            break;
+        case AC_MINIMIZE:
+            bits3 = 0x20;
+            break;
+        case TRANSPORT_RECORD:
+            bits3 = 0x40;
+            break;
+        case TRANSPORT_REWIND:
+            bits3 = 0x80;
+            break;
+    }
+
+    MUX_HEADER(0x01, 0x07);
+    xmit(0x9f);
+    xmit(0x05); // Length
+    xmit(0xa1); // consumer report
+    xmit(0x03);
+    xmit(bits1);
+    xmit(bits2);
+    xmit(bits3);
+    MUX_FOOTER(0x01);
+#endif
+}
diff --git a/protocol/iwrap/iwrap.h b/protocol/iwrap/iwrap.h
new file mode 100644
index 0000000000..ffaad9395d
--- /dev/null
+++ b/protocol/iwrap/iwrap.h
@@ -0,0 +1,49 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef IWRAP_H
+#define IWRAP_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "host_driver.h"
+
+
+/* enable iWRAP MUX mode */
+#define MUX_MODE
+
+
+host_driver_t *iwrap_driver(void);
+
+void iwrap_init(void);
+void iwrap_send(const char *s);
+void iwrap_mux_send(const char *s);
+void iwrap_buf_send(void);
+void iwrap_buf_add(uint8_t c);
+void iwrap_buf_del(void);
+
+void iwrap_call(void);
+void iwrap_kill(void);
+void iwrap_unpair(void);
+void iwrap_sleep(void);
+void iwrap_sniff(void);
+void iwrap_subrate(void);
+bool iwrap_failed(void);
+uint8_t iwrap_connected(void);
+uint8_t iwrap_check_connection(void);
+
+#endif
diff --git a/protocol/iwrap/main.c b/protocol/iwrap/main.c
new file mode 100644
index 0000000000..a552afb67e
--- /dev/null
+++ b/protocol/iwrap/main.c
@@ -0,0 +1,378 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+//#include <avr/wdt.h>
+#include "wd.h" // in order to use watchdog in interrupt mode
+#include <avr/sleep.h>
+#include <util/delay.h>
+#include <avr/power.h>
+#include "keyboard.h"
+#include "matrix.h"
+#include "host.h"
+#include "iwrap.h"
+#ifdef HOST_VUSB
+#   include "vusb.h"
+#   include "usbdrv.h"
+#endif
+#include "uart.h"
+#include "suart.h"
+#include "timer.h"
+#include "debug.h"
+#include "usb_keycodes.h"
+#include "command.h"
+
+
+static void sleep(uint8_t term);
+static bool console(void);
+static uint8_t console_command(uint8_t c);
+static uint8_t key2asc(uint8_t key);
+
+
+/*
+static void set_prr(void)
+{
+    power_adc_disable();
+    power_spi_disable();
+    power_twi_disable();
+#ifndef TIMER_H
+    //power_timer0_disable(); // used in timer.c
+#endif
+    power_timer1_disable();
+    power_timer2_disable();
+}
+*/
+
+/*
+static void pullup_pins(void)
+{
+    // DDRs are set to 0(input) by default.
+#ifdef PORTA
+    PORTA = 0xFF;
+#endif
+    PORTB = 0xFF;
+    PORTC = 0xFF;
+    PORTD = 0xFF;
+#ifdef PORTE
+    PORTE = 0xFF;
+#endif
+#ifdef PORTE
+    PORTF = 0xFF;
+#endif
+}
+*/
+
+
+#ifdef HOST_VUSB
+static void disable_vusb(void)
+{
+    // disable interrupt & disconnect to prevent host from enumerating
+    USB_INTR_ENABLE &= ~(1 << USB_INTR_ENABLE_BIT);
+    usbDeviceDisconnect();
+}
+
+static void enable_vusb(void)
+{
+    USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT);
+    usbDeviceConnect();
+}
+
+static void init_vusb(void)
+{
+    uint8_t i = 0;
+
+    usbInit();
+    disable_vusb();
+    /* fake USB disconnect for > 250 ms */
+    while(--i){
+        _delay_ms(1);
+    }
+    enable_vusb();
+}
+#endif
+
+void change_driver(host_driver_t *driver)
+{
+    host_clear_keyboard_report();
+    host_swap_keyboard_report();
+    host_clear_keyboard_report();
+    host_send_keyboard_report();
+    _delay_ms(1000);
+    host_set_driver(driver);
+}
+
+
+static bool sleeping = false;
+static bool insomniac = false;   // TODO: should be false for power saving
+static uint16_t last_timer = 0;
+
+int main(void)
+{
+    MCUSR = 0;
+    clock_prescale_set(clock_div_1);
+    WD_SET(WD_OFF);
+
+    // power saving: the result is worse than nothing... why?
+    //pullup_pins();
+    //set_prr();
+
+    print_enable = true;
+    debug_enable = false;
+
+#ifdef HOST_VUSB
+    disable_vusb();
+#endif
+    uart_init(115200);
+    keyboard_init();
+    print("\nSend BREAK for UART Console Commands.\n");
+
+    // TODO: move to iWRAP/suart file
+    print("suart init\n");
+    // suart init
+    // PC4: Tx Output IDLE(Hi)
+    PORTC |= (1<<4);
+    DDRC  |= (1<<4);
+    // PC5: Rx Input(pull-up)
+    PORTC |= (1<<5);
+    DDRC  &= ~(1<<5);
+    // suart receive interrut(PC5/PCINT13)
+    PCMSK1 = 0b00100000;
+    PCICR  = 0b00000010;
+
+    host_set_driver(iwrap_driver());
+
+    print("iwrap_init()\n");
+    iwrap_init();
+    iwrap_call();
+
+    last_timer = timer_read();
+    while (true) {
+#ifdef HOST_VUSB
+        if (host_get_driver() == vusb_driver())
+            usbPoll();
+#endif
+        keyboard_proc();
+#ifdef HOST_VUSB
+        if (host_get_driver() == vusb_driver())
+            vusb_transfer_keyboard();
+#endif
+        if (matrix_is_modified() || console()) {
+            last_timer = timer_read();
+            sleeping = false;
+        } else if (!sleeping && timer_elapsed(last_timer) > 4000) {
+            sleeping = true;
+            iwrap_check_connection();
+        }
+
+        if (host_get_driver() == iwrap_driver()) {
+            if (sleeping && !insomniac) {
+                _delay_ms(1);   // wait for UART to send
+                iwrap_sleep();
+                sleep(WDTO_60MS);
+            }
+        }
+    }
+}
+
+static void sleep(uint8_t term)
+{
+    WD_SET(WD_IRQ, term);
+
+    cli();
+    set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+    sleep_enable();
+    sleep_bod_disable();
+    sei();
+    sleep_cpu();
+    sleep_disable();
+
+    WD_SET(WD_OFF);
+}
+
+ISR(WDT_vect)
+{
+    // wake up
+}
+
+static bool console(void)
+{
+        // Send to Bluetoot module WT12
+        static bool breaked = false;
+        if (!uart_available())
+            return false;
+        else {
+            uint8_t c;
+            c = uart_getchar();
+            uart_putchar(c);
+            switch (c) {
+                case 0x00: // BREAK signal
+                    if (!breaked) {
+                        print("break(? for help): ");
+                        breaked = true;
+                    }
+                    break;
+                case '\r':
+                    uart_putchar('\n');
+                    iwrap_buf_send();
+                    break;
+                case '\b':
+                    iwrap_buf_del();
+                    break;
+                default:
+                    if (breaked) {
+                        print("\n");
+                        console_command(c);
+                        breaked = false;
+                    } else {
+                        iwrap_buf_add(c);
+                    }
+                    break;
+            }
+            return true;
+        }
+}
+
+uint8_t command_extra()
+{
+    return console_command(key2asc(host_get_first_key()));
+}
+
+static uint8_t console_command(uint8_t c)
+{
+    switch (c) {
+        case 'h':
+        case '?':
+            print("\nCommands for Bluetooth(WT12/iWRAP):\n");
+            print("r: reset. software reset by watchdog\n");
+            print("i: insomniac. prevent KB from sleeping\n");
+            print("c: iwrap_call. CALL for BT connection.\n");
+#ifdef HOST_VUSB
+            print("u: USB mode. switch to USB.\n");
+            print("w: BT mode. switch to Bluetooth.\n");
+#endif
+            print("k: kill first connection.\n");
+            print("Del: unpair first pairing.\n");
+            print("\n");
+            return 0;
+        case 'r':
+            print("reset\n");
+            WD_AVR_RESET();
+            return 1;
+        case 'i':
+            insomniac = !insomniac;
+            if (insomniac)
+                print("insomniac\n");
+            else
+                print("not insomniac\n");
+            return 1;
+        case 'c':
+            print("iwrap_call()\n");
+            iwrap_call();
+            return 1;
+#ifdef HOST_VUSB
+        case 'u':
+            print("USB mode\n");
+            init_vusb();
+            change_driver(vusb_driver());
+            //iwrap_kill();
+            //iwrap_sleep();
+            // disable suart receive interrut(PC5/PCINT13)
+            PCMSK1 &= ~(0b00100000);
+            PCICR  &= ~(0b00000010);
+            return 1;
+        case 'w':
+            print("iWRAP mode\n");
+            change_driver(iwrap_driver());
+            disable_vusb();
+            // enable suart receive interrut(PC5/PCINT13)
+            PCMSK1 |= 0b00100000;
+            PCICR  |= 0b00000010;
+            return 1;
+#endif
+        case 'k':
+            print("kill\n");
+            iwrap_kill();
+            return 1;
+        case 0x7F:  // DELETE
+            print("unpair\n");
+            iwrap_unpair();
+            return 1;
+    }
+    return 0;
+}
+
+// convert keycode into ascii charactor
+static uint8_t key2asc(uint8_t key)
+{
+    switch (key) {
+        case KB_A: return 'a';
+        case KB_B: return 'b';
+        case KB_C: return 'c';
+        case KB_D: return 'd';
+        case KB_E: return 'e';
+        case KB_F: return 'f';
+        case KB_G: return 'g';
+        case KB_H: return 'h';
+        case KB_I: return 'i';
+        case KB_J: return 'j';
+        case KB_K: return 'k';
+        case KB_L: return 'l';
+        case KB_M: return 'm';
+        case KB_N: return 'n';
+        case KB_O: return 'o';
+        case KB_P: return 'p';
+        case KB_Q: return 'q';
+        case KB_R: return 'r';
+        case KB_S: return 's';
+        case KB_T: return 't';
+        case KB_U: return 'u';
+        case KB_V: return 'v';
+        case KB_W: return 'w';
+        case KB_X: return 'x';
+        case KB_Y: return 'y';
+        case KB_Z: return 'z';
+        case KB_1: return '1';
+        case KB_2: return '2';
+        case KB_3: return '3';
+        case KB_4: return '4';
+        case KB_5: return '5';
+        case KB_6: return '6';
+        case KB_7: return '7';
+        case KB_8: return '8';
+        case KB_9: return '9';
+        case KB_0: return '0';
+        case KB_ENTER: return '\n';
+        case KB_ESCAPE: return 0x1B;
+        case KB_BSPACE: return '\b';
+        case KB_TAB: return '\t';
+        case KB_SPACE: return ' ';
+        case KB_MINUS: return '-';
+        case KB_EQUAL: return '=';
+        case KB_LBRACKET: return '[';
+        case KB_RBRACKET: return ']';
+        case KB_BSLASH: return '\\';
+        case KB_NONUS_HASH: return '\\';
+        case KB_SCOLON: return ';';
+        case KB_QUOTE: return '\'';
+        case KB_GRAVE: return '`';
+        case KB_COMMA: return ',';
+        case KB_DOT: return '.';
+        case KB_SLASH: return '/';
+        default: return 0x00;
+    }
+}
diff --git a/protocol/iwrap/suart.S b/protocol/iwrap/suart.S
new file mode 100644
index 0000000000..1b02909638
--- /dev/null
+++ b/protocol/iwrap/suart.S
@@ -0,0 +1,156 @@
+;---------------------------------------------------------------------------;

+; Software implemented UART module                                          ;

+; (C)ChaN, 2005 (http://elm-chan.org/)                                      ;

+;---------------------------------------------------------------------------;

+; Bit rate settings:

+;

+;            1MHz  2MHz  4MHz  6MHz  8MHz  10MHz  12MHz  16MHz  20MHz

+;   2.4kbps   138     -     -     -     -      -      -      -      -

+;   4.8kbps    68   138     -     -     -      -      -      -      -

+;   9.6kbps    33    68   138   208     -      -      -      -      -

+;  19.2kbps     -    33    68   102   138    173    208      -      -

+;  38.4kbps     -     -    33    50    68     85    102    138    172

+;  57.6kbps     -     -    21    33    44     56     68     91    114

+; 115.2kbps     -     -     -     -    21     27     33     44     56

+

+.nolist

+#include <avr/io.h>

+.list

+

+#define	BPS	102 	/* Bit delay. (see above table) */

+#define	BIDIR	0	/* 0:Separated Tx/Rx, 1:Shared Tx/Rx */

+

+#define	OUT_1		sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 1 */

+#define	OUT_0		cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT	/* Output 0 */

+#define	SKIP_IN_1	sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 1 */

+#define	SKIP_IN_0	sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT	/* Skip if 0 */

+

+

+

+#ifdef SPM_PAGESIZE

+.macro	_LPMI	reg

+	lpm	\reg, Z+

+.endm

+.macro	_MOVW	dh,dl, sh,sl

+	movw	\dl, \sl

+.endm

+#else

+.macro	_LPMI	reg

+	lpm

+	mov	\reg, r0

+	adiw	ZL, 1

+.endm

+.macro	_MOVW	dh,dl, sh,sl

+	mov	\dl, \sl

+	mov	\dh, \sh

+.endm

+#endif

+

+

+

+;---------------------------------------------------------------------------;

+; Transmit a byte in serial format of N81

+;

+;Prototype: void xmit (uint8_t data);

+;Size: 16 words

+

+.global xmit

+.func xmit

+xmit:

+#if BIDIR

+	ldi	r23, BPS-1	;Pre-idle time for bidirectional data line

+5:	dec	r23     	;

+	brne	5b		;/

+#endif

+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

+

+	com	r24		;C = start bit

+	ldi	r25, 10		;Bit counter

+	cli			;Start critical section

+

+1:	ldi	r23, BPS-1	;----- Bit transferring loop 

+2:	dec	r23     	;Wait for a bit time

+	brne	2b		;/

+	brcs	3f		;MISO = bit to be sent

+	OUT_1			;

+3:	brcc	4f		;

+	OUT_0			;/

+4:	lsr	r24     	;Get next bit into C

+	dec	r25     	;All bits sent?

+	brne	1b	     	;  no, coutinue

+

+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

+	ret

+.endfunc

+

+

+

+;---------------------------------------------------------------------------;

+; Receive a byte

+;

+;Prototype: uint8_t rcvr (void);

+;Size: 19 words

+

+.global rcvr

+.func rcvr

+rcvr:

+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

+

+	ldi	r24, 0x80	;Receiving shift reg

+	cli			;Start critical section

+

+1:	SKIP_IN_1		;Wait for idle

+	rjmp	1b

+2:	SKIP_IN_0		;Wait for start bit

+	rjmp	2b

+	ldi	r25, BPS/2	;Wait for half bit time

+3:	dec	r25

+	brne	3b

+

+4:	ldi	r25, BPS	;----- Bit receiving loop

+5:	dec	r25     	;Wait for a bit time

+	brne	5b		;/

+	lsr	r24     	;Next bit

+	SKIP_IN_0		;Get a data bit into r24.7

+	ori	r24, 0x80

+	brcc	4b	     	;All bits received?  no, continue

+

+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

+	ret

+.endfunc

+

+

+; Not wait for start bit. This should be called after detecting start bit.

+.global recv

+.func recv

+recv:

+	in	r0, _SFR_IO_ADDR(SREG)	;Save flags

+

+	ldi	r24, 0x80	;Receiving shift reg

+	cli			;Start critical section

+

+;1:	SKIP_IN_1		;Wait for idle

+;	rjmp	1b

+;2:	SKIP_IN_0		;Wait for start bit

+;	rjmp	2b

+	ldi	r25, BPS/2	;Wait for half bit time

+3:	dec	r25

+	brne	3b

+

+4:	ldi	r25, BPS	;----- Bit receiving loop

+5:	dec	r25     	;Wait for a bit time

+	brne	5b		;/

+	lsr	r24     	;Next bit

+	SKIP_IN_0		;Get a data bit into r24.7

+	ori	r24, 0x80

+	brcc	4b	     	;All bits received?  no, continue

+

+	ldi	r25, BPS/2	;Wait for half bit time

+6:	dec	r25

+	brne	6b

+7:	SKIP_IN_1		;Wait for stop bit

+	rjmp	7b

+

+	out	_SFR_IO_ADDR(SREG), r0	;End of critical section

+	ret

+.endfunc

diff --git a/protocol/iwrap/suart.h b/protocol/iwrap/suart.h
new file mode 100644
index 0000000000..72725b998f
--- /dev/null
+++ b/protocol/iwrap/suart.h
@@ -0,0 +1,8 @@
+#ifndef SUART

+#define SUART

+

+void xmit(uint8_t);

+uint8_t rcvr(void);

+uint8_t recv(void);

+

+#endif	/* SUART */

diff --git a/protocol/iwrap/wd.h b/protocol/iwrap/wd.h
new file mode 100644
index 0000000000..99058f0331
--- /dev/null
+++ b/protocol/iwrap/wd.h
@@ -0,0 +1,159 @@
+/* This is from http://www.mtcnet.net/~henryvm/wdt/ */

+#ifndef _AVR_WD_H_

+#define _AVR_WD_H_

+

+#include <avr/io.h>

+

+/*

+Copyright (c) 2009, Curt Van Maanen

+

+Permission to use, copy, modify, and/or distribute this software for any

+purpose with or without fee is hereby granted, provided that the above

+copyright notice and this permission notice appear in all copies.

+

+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES

+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF

+MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

+ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

+WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN

+ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF

+OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

+

+

+include usage-

+    #include "wd.h"             //if in same directory as project

+    #include <avr/wd.h>         //if wd.h is in avr directory

+

+set watchdog modes and prescale

+

+usage-

+    WD_SET(mode,[timeout]);     //prescale always set

+

+modes-

+    WD_OFF                      disabled

+    WD_RST                      normal reset mode

+    WD_IRQ                      interrupt only mode (if supported)

+    WD_RST_IRQ                  interrupt+reset mode (if supported)

+

+timeout-

+    WDTO_15MS                   default if no timeout provided

+    WDTO_30MS

+    WDTO_60MS

+    WDTO_120MS

+    WDTO_250MS

+    WDTO_500MS

+    WDTO_1S

+    WDTO_2S

+    WDTO_4S                     (if supported)

+    WDTO_8S                     (if supported)

+

+examples-

+    WD_SET(WD_RST,WDTO_1S);     //reset mode, 1s timeout

+    WD_SET(WD_OFF);             //watchdog disabled (if not fused on)

+    WD_SET(WD_RST);             //reset mode, 15ms (default timeout)

+    WD_SET(WD_IRQ,WDTO_120MS);  //interrupt only mode, 120ms timeout

+    WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout

+

+

+for enhanced watchdogs, if the watchdog is not being used WDRF should be

+cleared on every power up or reset, along with disabling the watchdog-

+    WD_DISABLE();               //clear WDRF, then turn off watchdog

+

+*/

+

+//reset registers to the same name (MCUCSR)

+#if !defined(MCUCSR)

+#define MCUCSR                  MCUSR

+#endif

+

+//watchdog registers to the same name (WDTCSR)

+#if !defined(WDTCSR)

+#define WDTCSR                  WDTCR

+#endif

+

+//if enhanced watchdog, define irq values, create disable macro

+#if defined(WDIF)

+#define WD_IRQ                  0xC0

+#define WD_RST_IRQ              0xC8

+#define WD_DISABLE()            do{                       \

+                                    MCUCSR &= ~(1<<WDRF); \

+                                    WD_SET(WD_OFF);       \

+                                }while(0)

+#endif

+

+//all watchdogs

+#define WD_RST                  8

+#define WD_OFF                  0

+

+//prescale values

+#define WDTO_15MS               0

+#define WDTO_30MS               1

+#define WDTO_60MS               2

+#define WDTO_120MS              3

+#define WDTO_250MS              4

+#define WDTO_500MS              5

+#define WDTO_1S                 6

+#define WDTO_2S                 7

+

+//prescale values for avrs with WDP3

+#if defined(WDP3)

+#define WDTO_4S                 0x20

+#define WDTO_8S                 0x21

+#endif

+

+//watchdog reset

+#define WDR()                   __asm__ __volatile__("wdr")

+

+//avr reset using watchdog

+#define WD_AVR_RESET()          do{                              \

+                                    __asm__ __volatile__("cli"); \

+                                    WD_SET_UNSAFE(WD_RST);       \

+                                    while(1);                    \

+                                }while(0)

+

+/*set the watchdog-

+1. save SREG

+2. turn off irq's

+3. reset watchdog timer

+4. enable watchdog change

+5. write watchdog value

+6. restore SREG (restoring irq status)

+*/

+#define WD_SET(val,...)                                 \

+    __asm__ __volatile__(                               \

+        "in __tmp_reg__,__SREG__"           "\n\t"      \

+        "cli"                               "\n\t"      \

+        "wdr"                               "\n\t"      \

+        "sts %[wdreg],%[wden]"              "\n\t"      \

+        "sts %[wdreg],%[wdval]"             "\n\t"      \

+        "out __SREG__,__tmp_reg__"          "\n\t"      \

+        :                                               \

+        : [wdreg] "M" (&WDTCSR),                        \

+          [wden]  "r" ((uint8_t)(0x18)),                \

+          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \

+        : "r0"                                          \

+)

+

+/*set the watchdog when I bit in SREG known to be clear-

+1. reset watchdog timer

+2. enable watchdog change

+5. write watchdog value

+*/

+#define WD_SET_UNSAFE(val,...)                          \

+    __asm__ __volatile__(                               \

+        "wdr"                               "\n\t"      \

+        "sts %[wdreg],%[wden]"              "\n\t"      \

+        "sts %[wdreg],%[wdval]"             "\n\t"      \

+        :                                               \

+        : [wdreg] "M" (&WDTCSR),                        \

+          [wden]  "r" ((uint8_t)(0x18)),                \

+          [wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0)))  \

+)

+

+

+//for compatibility with avr/wdt.h

+#define wdt_enable(val) WD_SET(WD_RST,val)

+#define wdt_disable()   WD_SET(WD_OFF)

+

+

+#endif /* _AVR_WD_H_ */