diff options
author | tmk <hasu@tmk-kbd.com> | 2015-05-13 11:13:10 +0900 |
---|---|---|
committer | tmk <hasu@tmk-kbd.com> | 2015-05-13 11:13:10 +0900 |
commit | f1f2066657f4a0998adc016c95d7e541b436e09f (patch) | |
tree | d056cb656b538c4f3a3c205363e0070976655e2e /tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino | |
parent | 1c73e574f109a17566db99e399bdf86007488d2a (diff) | |
parent | f6d56675f9f981c5464f0ca7a1fbb0162154e8c5 (diff) | |
download | qmk_firmware-f1f2066657f4a0998adc016c95d7e541b436e09f.tar.gz qmk_firmware-f1f2066657f4a0998adc016c95d7e541b436e09f.zip |
Merge commit 'f6d56675f9f981c5464f0ca7a1fbb0162154e8c5'
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino')
m--------- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 | 0 | ||||
-rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino | 51 |
2 files changed, 51 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 -Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4 diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino new file mode 100644 index 0000000000..f26ff964da --- /dev/null +++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/scale/scale.ino @@ -0,0 +1,51 @@ +/* Digital Scale Output. Written for Stamps.com Model 510 */ +/* 5lb Digital Scale; any HID scale with Usage page 0x8d should work */ + +#include <hid.h> +#include <hiduniversal.h> +#include <usbhub.h> + +#include "scale_rptparser.h" + +// Satisfy the IDE, which needs to see the include statment in the ino too. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +USBHub Hub(&Usb); +HIDUniversal Hid(&Usb); +Max_LCD LCD(&Usb); +ScaleEvents ScaleEvents(&LCD); +ScaleReportParser Scale(&ScaleEvents); + +void setup() +{ + Serial.begin( 115200 ); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + Serial.println("Start"); + + if (Usb.Init() == -1) + Serial.println("OSC did not start."); + + // set up the LCD's number of rows and columns: + LCD.begin(16, 2); + LCD.clear(); + LCD.home(); + LCD.setCursor(0,0); + LCD.write('R'); + + delay( 200 ); + + if (!Hid.SetReportParser(0, &Scale)) + ErrorMessage<uint8_t>(PSTR("SetReportParser"), 1 ); +} + +void loop() +{ + Usb.Task(); +} + |